Used Water Cooling Device for sale (23,093)

Condition: used, This listing is for a Nickel Electro Water bath Itsdpfxsxzh Hrs Aa Eor

Condition: used, Electric chain hoist, ELEPHANT / FBH (Japan), Type F(S)2-A(B4-B6)M(P-G) Serial No. Year of manufacture: 1997 Load capacity: 2,000 kg Hook travel: 2.6 meters Main lifting speed: 3.8 m/min Fine lifting speed: 1 m/min Chain size: 7.1 x 21 / grade 8 Control pendant cable length: approx. 2.5 meters Power supply: 400 Volt, 50 Hz Isdpfxevcdv Aj Aa Eotr 2 load strands = 2,000 kg - Emergency stop Net weight: 70 kg Good condition

Condition: used, tank capacity: 2,300 l, GENERAL Design: upright Remarks: The height-adjustable ball screws are missing on 3 feet; 1 heating connection has been cut off Speed: 175 / 365 rpm Outer diameter: 1,500 mm Inner diameter: 1,440 mm Total height: 2,700 mm Heating/cooling: present Power: 0.2 / 0.92 kW Top: bolted lid with folding segment Agitator: propeller Mounting style: feet Location: Bremen Cylinder tempering: double jacket Volume: 2,300 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,450 mm TANK Number of feet: 4 pcs EQUIPMENT Note: Discharge connection cut off Isdpfx Ajx Dma Nja Eetr Discharge: 65 mm MATERIAL SPECIFICATION Jacket material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 380 Volt Agitator arrangement: eccentric in top head

Year of construction: 2022, condition: new, For sale is a hammer mill for the production of powdered goods in the spice / herb / food industry! Structure: 1 piece hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the rear wall 2 pieces flushing ports into the rotating part of the mill Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord Inside the housing a sieve basket with crusher, from the outside the sieve can fix Bottom centered an outlet with appropriate connection flanges Motor 400/680 volts; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. sieve according to your choice 3 pcs. The rotor is also in V2A design, (beater with 96 platelets) Rotor can be turned 180°, in addition, the beater platelets can be turned 1 time. For this purpose, we recommend balancing after turning. 1 piece feeding screw for hammer mill with gear motor with 1,2 kW screw equipped with two cleaning balls at the hinged lid lid is equipped with lid switch and tumbler insertion hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for infinitely variable speed control speed display beater 3 PTC thermistor sensors as protection against overheating of the motor. Sensor for vibration protection Integration of cover switches Switch cabinet in stainless steel Emergency stop, main switch 1 piece Cooling or heating jacket on the rear wall of the mill housing Welded seams pickled and glass beads blasted on the outside. Steel parts, such as motor and motor console primed and painted according to RAL 1013. Attention: It must be ensured that no metal parts enter the mill! Total price of the plant described above price 145.000 € superstructure: 1 piece Hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the back wall 2 pieces of flushing connections into the rotating part of the mill. Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord In the inside of the housing a sieve basket with crusher, from the outside the sieve can be fixed At the bottom in the middle an outlet with a corresponding connection flange. Motor 400/680 Volt; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. screens of your choice 3 pieces rotors The rotor is also in V2A design, (beater with 96 plates) rotor can be rotated by 180 the beater plates can be turned 1 time. Itodpfxopz H D Is Aa Eer be turned. For this purpose, we recommend balancing after turning. 1 piece Feeding screw for hammer mill with gear motor with 1,2 kW Screw equipped with two cleaning balls on hinged lid lid is equipped with lid switch and tumbler feeding hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for stepless speed control speed indicator beater

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10404807, Professional recirculating chiller, purchased (used) via Amikon GmbH in January 2024. Always serviced and inspected by Julabo themselves. In 2025, among other things, the pump and power board were replaced. Invoices and reports are available and will be supplied. Iedpfxsw U Exgj Aa Ejtr Specifications: - Type: FLW4006 (water-cooled) - Power supply: 400V, 50Hz, 3P+N+PE, 16A - Refrigerant: R452A, 700g - Capacity: approx. 4 kW - Temperature range: –15 °C to +40 °C - Temperature stability: ±0.5 °C - Serial number: 10404807 Condition: - In very good technical condition - Immediately ready for use - Including documentation and maintenance invoices

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: AST2 190HE-MWT - 2200370969, cooling capacity: 539 kW (732.84 HP), type of input current: three-phase, type of cooling: water, overall weight: 5,098 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 92.1 m³/h, pump pressure: 3.4 bar, total width: 2,191 mm, total length: 5,445 mm, total height: 2,423 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-Cooled Chiller Unit Type: Aries TECH AST2 190 HE-MWT – 539 kW Manufacturer: MTA S.p.A. The Aries TECH AST2 190 HE-MWT are compact air-cooled chiller units suitable for outdoor installation (from -20°C to +48°C), equipped with a shell-and-tube evaporator, six scroll compressors, compressor shut-off valves, crankcase heater, phase monitoring, P3 twin pump, 800-liter buffer tank, electric frost protection heater, EC fans, condenser filter, and control panel. Comes with a new condenser coil. Chilled water outlet temperatures adjustable from -10°C to +20°C. Cooling capacity (kW): 539 Chilled water temperature out / in (°C): 7 / 12 Flow rate (m³/h): 92.1 Available pump pressure (Bar): 3.4 Ambient temperature (°C): 32 Isdpex E S S Nofx Aa Estr Refrigeration circuit: Refrigerant: R 410A Number of refrigeration circuits: 2 Number of compressors: 6 Number of capacity stages: 6 Electrical data: Voltage: 400 V, frequency: 50 Hz, phases: 3 Max. power consumption (kW): 261 Max. current (A): 431 Starting current per circuit (A): 636 Protection class: IP54 Dimensions: Length (mm): 5445, Width (mm): 2191, Height (mm): 2423 Weight (kg): 5098 (operating weight) Connection: DN 125 (Vitaulic) Serial no.: 2200370969 Year of manufacture: 2021 Condition: Cosmetic 2, Technically OK (Used machine) Price: on request in EUR (plus VAT, ex works Nettetal) – 3-month warranty Used machines may show visual imperfections due to previous use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, This listing is for 1 of 3 Millipore Rios-DI UV Water Puerification System RiOs-DI® 3 UV Water Systems with built-in 254 nm bactericidal UV lamp easily and economically produce up to 15 L/day of consistent-quality Type 2 pure water from tap water. A combination of reverse osmosis (RO) technology and deionization (DI) resins delivers water with high resistivity ( > 10 MΩ·cm) and low TOC (< 30 ppb) whose quality surpasses that of service DI or distilled water UV lamp helps ensure optimal water quality for bacteria-sensitive applications Pure water flow rate of >2.4 L/hr Integrated 6-L storage reservoir Avoid the drawbacks of other purification methods such high lab space demands for resin bottles or distillation equipment; heavy maintenance; lack of quality monitoring; and in the case of distillation, high energy and water use Itjdpfjxzhcmox Aa Esr

Year of construction: 2010, condition: used, Rühle MKR 220 Tumbler – 2010 Model with Cooling Excellent Condition – Fully Tested & Ready for Production Upgrade your processing line with this well-maintained Rühle MKR 220 vacuum tumbler. Built in 2010 and equipped with an integrated cooling system, this machine offers exceptional reliability, consistent performance, and high-quality results for meat, poultry, and seafood applications. The unit has been carefully inspected and is in excellent working condition, with smooth operation and no mechanical issues. ----- Key Features - Integrated Cooling System – Ensures optimal product temperatures during tumbling for improved quality and safety. - Vacuum Technology – Enhances product texture, brine absorption, and yield. - Robust Stainless Steel Construction – Hygienic, durable, and easy to clean. - User-Friendly Controls – Simple programming and operation with clear digital interface. - Reversible Drum – Gentle and efficient tumbling for a wide range of products. - Compact Footprint – Ideal for medium-scale production environments. ----- Technical Specifications - Model: Rühle MKR 220 - Year of Manufacture: 2010 - Drum Capacity: approx. 220 liters - Cooling System: Integrated, efficient direct cooling - Vacuum Pump: High-performance Busch pump - Material: Stainless steel (AISI 304) - Power Supply: 400V / 50Hz (Other voltages possible with transformer) - Dimensions: Approx. 1700 × 1200 × 1500 mm - Weight: Approx. 450–500 kg Iodpox Dyp Rjfx Aa Estr - Condition: Excellent – fully functional, clean, and tested ----- Price & Availability Available immediately. Price on request. Worldwide shipping can be arranged.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,025 kg, total length: 2,382 mm, total width: 806 mm, total height: 1,681 mm, motor manufacturer: Johnson Controls, power: 250 kW (339.91 HP), 2x new and originally packaged Johnson Controls YORK YCSE chillers. Stored on pallet. Itedpsx Hg Inefx Aa Esr

Condition: used, * for hydraulic tools with maximum clamping length, * Thread: M44x1.5, * Right-hand closing. Price per piece: €60.00 + VAT. Iodpfelkcdvsx Aa Eetr

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Ijdpfx Aasxzprcs Estr Further questions welcomed by phone.

Condition: used, maximum load weight: 13,900 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 01/2009, loading space length: 7,750 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2009, Equipment: tail-lift, 2-AXLE HEIWO TRAILER IN EXCELLENT CONDITION Body: Fully insulated box by HEIWO Chassis make and type: HTF HWA 20MZ Refrigeration: Carrier TRS Iceland First registration: MOT (APK): - Internal dimensions (L x W x H): 775 x 250 x 270 cm Unladen weight: 6,100 kg Payload: 13,900 kg Gross Vehicle Weight: 20,000 kg Suspension: Air suspension Axles: BPW axles with disc brakes Tyre size: 265/70 R22.5 (twin fitment) Tyre tread depth axle 1: Left 30%, Right 30% Tyre tread depth axle 2: Left 50%, Right 50% Extras: ABS, EBS, fully insulated box built by HEIWO, robust box and floor, 5 stainless steel ceiling rails with bars, Carrier TRS Iceland refrigeration unit (operates via truck power or 380V), BPW axles with disc brakes, additional lighting, 2,000 kg Bär tail lift, complete service history available, immediately available and ready for operation, etc. BEAUTIFUL DUTCH COMBINATION EXCEPTIONALLY WELL MAINTAINED Iedpfx Aasx Ami Is Estr IMMEDIATELY AVAILABLE Further Information: - Length: 9,830 mm - Unladen weight: 6,100 kg - Tyre type | First axle: Goodyear - Tyre size | First axle: 265/70 R19.5 - Tread depth outer left | First axle: 30% - Tread depth inner left | First axle: 30% - Tread depth outer right | First axle: 30% - Tread depth inner right | First axle: 30% - Max. axle load | First axle: 10,000 kg - Tyre type | Second axle: Goodyear - Tyre size | Second axle: 265/70 R19.5 - Tread depth outer left | Second axle: 30% - Tread depth inner left | Second axle: 30% - Tread depth outer right | Second axle: 30% - Tread depth inner right | Second axle: 30% - Max. axle load | Second axle: 10,000 kg - Wheelbase: 181 cm - Tail lift | Manufacturer: Bär - Tail lift | Lifting capacity: 2,000 kg - Position | First axle: Rear - Make | First axle: Other - Brake type | First axle: Disc brakes - Suspension | First axle: Air suspension - Twin tyres | First axle: Yes - Position | Second axle: Rear - Make | Second axle: Other - Brake type | Second axle: Disc brakes - Suspension | Second axle: Air suspension - Twin tyres | Second axle: Yes Additional Equipment: - Homepage - SemCollection - SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about costs and procedures applicable in your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to alterations, prior sale, and errors.

Condition: used, This listing is for a Clifton Unstirred Water Bath Ijdpoxzguzefx Aa Ejtr

Condition: good (used), functionality: fully functional, A fuel transfer device is being offered for sale. Inspection possible by appointment. Ijdext H Ilepfx Aa Estr Manufacturer: GL GmbH Metall- und Werkstattechnik − Model: 100/100 S − Serial number: 3448 − Year of manufacture: 08/2017 − Technical data: > Tank capacity: 100 litres > Delivery rate: 15 l/min > Weight: 92 kg > Fill level indicator: visual > Mobility: mobile > Switching suction/return filling: Single-lever operation/ball valve > Tank change: manual

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: TAG050/HE-BIO-FSH - 2200415896, cooling capacity: 111 kW (150.92 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,253 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 18.9 m³/h, pump pressure: 1.18 bar, total width: 1,110 mm, total length: 3,407 mm, total height: 2,155 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process Air Cooler/ Chiller/ Air-Cooled Water Chiller, Type: Taurus TAG 050/HE-BIO-FSH Manufacturer: MTA S.p.A. The Taurus TAG 050/HE-BIO-FSH are compact water chiller units, suitable for outdoor installation, including a hydronic kit (200 l tank + pump), designed for low ambient temperatures down to -20°C, equipped with electronic fan speed control (EC fans). Cooling capacity: 111 kW Chilled water outlet/inlet temperature: 7 / 12°C Flow rate: 18.9 m³/h Available pump pressure: 1.18 bar Ambient temperature: 32°C Refrigerant: R 454B Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max power input: 51 kW Max current: 85 A Starting current circuit: 302 A Protection class: IP54 Dimensions: Itsdpfx Aaow Tbqve Eer Length: 3407 mm, Width: 1110 mm, Height: 2155 mm Weight: 1253 kg Connection: Rp 2 1/2" Serial no.: 2200415896 Year of manufacture: 2024 Condition: Visual grade 1, technically OK Stock unit, as new (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Table device for setting small circular saw blades Isdpfx Aelf H Tvsa Eetr

Condition: used, Grant JB1 Water Bath Iedpoxx Anfefx Aa Ejtr

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: GLT135SHE -2200333157, cooling capacity: 354 kW (481.31 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,428 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 60.7 m³/h, pump pressure: 2.51 bar, total width: 2,190 mm, total length: 4,530 mm, total height: 2,425 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-cooled Chiller, Type: Galaxy GLT 135 SHE Manufacturer: MTA S.p.A. The Galaxy GLT 135 SHE units are compact air-cooled chillers designed for outdoor installation (operational from -20°C to +43°C). Features include a plate evaporator, scroll compressors, control and switch cabinet, compressor shut-off valves, equipment suitable for low ambient temperatures down to -20°C (EC fans), P2 pump, 510-liter buffer tank, electric frost protection heater, condenser filter mats including Victaulic couplings. Cooling capacity (kW): 354 Chilled water temperature out/in (°C): 7 / 12 Flow rate (m³/h): 60.7 Available pump pressure (bar): 2.51 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R 410A Number of refrigeration circuits: 2 Number of compressors: 6 Capacity steps (%): 0-17-33-50-67-83-100 Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power input (kW): 167.7 Max. current (A): 273.3 Starting current per circuit (A): 421.8 Protection class: IP54 Dimensions: Length (mm): 4530, Width (mm): 2190, Height (mm): 2425 Weight (kg): 4428 Connection: Victaulic DN 125 Itjdpsxqnydjfx Aa Eor Serial number: 2200333157 Year of manufacture: 2018 Condition: Cosmetically: 2, Technically: OK & tested Used Price: on request in EUR (plus VAT, ex works Nettetal) – 3 months warranty MTA offers, upon request, a functional test of the chiller together with the buyer prior to collection at the Nettetal branch. Used machines may have visual imperfections due to previous use. (Subject to technical changes and prior sale!)

Condition: used, This listing is for a Elga Purelab Option Water Purification System with 40l Tank. The unit is in full working condition and is ready for immediate release. Optimize your laboratory's water quality with the Elga Purelab Option Water Purification System, designed to deliver high-quality Type 2 water for various laboratory applications. Key Features: Type 2 Water Purification System: Perfect for general laboratory use and feeding Type 1 water purification systems, ensuring you have reliable water quality for various experiments. 40L Storage Tank: Equipped with a spacious 40L tank, providing ample storage for your purified water needs, minimizing the need for frequent refills. Advanced UV Treatment: Features a dual-wavelength UV lamp (185/254 nm) that facilitates photo-oxidation of feed water, significantly reducing Total Organic Carbon (TOC) levels to less than 30 parts per billion (ppb)—ideal for sensitive applications. High-Quality Deionization: Utilizes a deionization cartridge to achieve resistivity levels ranging from 1 to 10 , ensuring high purity water suitable for critical lab tasks. Built-in Boost Pump: The integrated boost pump facilitates the recirculation of treated water, enhancing the system's efficiency and maintaining water quality over time. Compact and User-Friendly Design: Designed for ease of use, the system’s compact footprint makes it suitable for various lab setups without compromising space. Specifications: Water Flow Rate: Capable of delivering up to 7.5 liters per hour (LPH), ensuring a steady supply of purified water for your laboratory requirements. Resistivity Levels: Achieves resistivity ranging from 1 to 10 megohm-cm, providing high-quality water suitable for sensitive analytical applications. TOC Reduction Performance: Effectively reduces TOC levels to less than 30 ppb, critical for applications requiring ultra-pure water. Itjdpfx Aaexxy U Ns Eer UV Lamp Specifications: The dual-wavelength UV lamp (185/254 nm) not only assists in TOC reduction but also helps in the disinfection of water, enhancing its overall quality.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AST2 115 HE - 2200394103, cooling capacity: 315 kW (428.28 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,181 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 53.8 m³/h, pump pressure: 2.99 bar, total width: 2,190 mm, total length: 3,425 mm, total height: 2,537 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-Cooled Chiller Unit Type: Aries TECH AST2 115 HE Manufacturer: MTA S.p.A. The Aries TECH AST2 115 HE is a compact air-cooled chiller designed for outdoor installation (ambient temperatures from -20°C to +48°C), equipped with a shell-and-tube evaporator, four scroll compressors, compressor shut-off valves, crankcase heaters, phase monitoring, P3 double pump, 598-liter tank, electric frost protection heater, condenser filter, and control and switch cabinet. Cooling capacity (kW): 315 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 53.8 Available pump pressure (bar): 2.99 Ambient temperature (°C): 32 Iedpfxew R A S Aj Aa Ejtr Refrigeration circuit: Refrigerant: R410A Number of refrigeration circuits: 2 Number of compressors: 4 Capacity stages (%): 0-25-50-75-100 Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power input (kW): 158 Max. current (A): 262 Starting current per circuit (A): 507 Protection class: IP54 Dimensions: Length (mm): 3,425 Width (mm): 2,190 Height (mm): 2,537 Weight (kg): 2,583 / 3,181 (transport / operating weight) Connection: DN 100 (Vitaulic) Serial No.: 2200394103 Year of manufacture: 2023 Condition: Visually: 2, Technically: OK & tested (Used unit) Price: on request in EUR (plus VAT ex works Nettetal) – 3 months warranty MTA offers, upon request and together with the buyer, a functional test of the chiller prior to collection at the Nettetal branch. Used machines may show visual wear due to previous use. (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, This listing is for a Millipore AFS 15E Water Purification System with 60l Tank. The unit is in full working condition and is ready for immediate release. The Millipore AFS 15E is designed to deliver high-quality Clinical Laboratory Reagent Water (CLRW) efficiently and economically, making it essential for laboratories that adhere to rigorous standards. Key Features: CLRW Compliance: Produces water that meets the Clinical and Laboratory Standards Institute (CLSI) guidelines, ensuring reliability in clinical settings. Elix® EDI Technology: Utilizes advanced electrodeionization (EDI) for low and predictable operating costs, coupled with self-regenerating ion exchange resins that reduce maintenance. Data Monitoring: Equipped with full monitoring capabilities, the system archives water quality data for up to six months, allowing for easy tracking and compliance verification. Feed Water Quality: Accepts potable water with a pressure range of 1–6 bar and a temperature range of 5–35°C, ensuring versatility in various setups. Storage Capacity: Comes with a 60L tank, providing ample storage for the purified water, which is crucial for laboratories with high water demands. Specifications: Production Capacity: Generates up to 300 litres of water daily, catering to high-throughput needs. Production Flow Rate: Delivers water to the reservoir at 15 L/h. Distribution Flow Rate: Dispenses water to analysers at up to 2 L/min, ensuring quick access when needed. Product Water Quality: Resistivity at 25°C: > 15 MΩ·cm, indicating high purity. Total Organic Carbon (TOC): < 30 ppb, suitable for sensitive analytical applications. Itsdpfx Aaoxxy Sze Eer Dimensions: Compact size of 585 x 268 x 426 mm (23 x 10.6 x 16.8 in) enables easy integration into laboratory spaces.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: AST2 140 HE - 2200358437, cooling capacity: 371 kW (504.42 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,271 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 63.5 m³/h, pump pressure: 2.33 bar, total width: 2,191 mm, total length: 3,465 mm, total height: 2,423 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit, Model: Aries TECH - AST2 140 HE Manufacturer: MTA S.p.A. The Aries TECH AST2 140 HE are compact chiller units designed for outdoor installation (from -20°C to +48°C), equipped with four scroll compressors, compressor shut-off valves, crankcase heater, phase monitoring, P2 pump, 710-liter tank, electric frost protection heater, condenser filter, control and switch cabinet, and a complete housing. Cooling capacity (kW): 371 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 63.5 Available pump pressure (bar): 2.33 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R410A Refrigeration circuits (number): 2 Compressors (number): 4 Capacity stages (%): 0-25-50-75-100 Iedpfexn Sxxjx Aa Ejtr Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW): 187 Max. current (A): 300 Starting current circuit (A): 633 Protection class: IP54 Dimensions: Length (mm): 3465, Width (mm): 2191, Height (mm): 2423 Weight (kg): 3271 Connection: DN 125 (Vitaulic) Serial No.: 2200358437 Year of manufacture: 2020 Condition: Visual: 2, Technical: OK & tested (Used equipment) Price: On request in Euro (plus VAT, ex works Nettetal) – 3 months warranty MTA offers, upon request together with the buyer, a functional test of the chiller unit prior to collection at the Nettetal branch. Used machines may have optical defects due to previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, This listing is for a Thermo Fisher Scientific Invitrogen iBlot 2 Gel Transfer device Iodpfsxxx Uhex Aa Estr The unit is in full working condition and is ready for immediate release. The iBlot 2 Gel Transfer Device is a key component of the iBlot 2 Dry Blotting System, designed for rapid, high-quality protein transfers from mini-, midi-, and E-PAGE™ gels onto nitrocellulose or PVDF membranes. This device ensures crisp and clear bands for Western blotting, streamlining your workflow and enhancing reproducibility. Key Features: - Fast Transfer: Achieve complete protein transfer in 7 minutes or less, significantly reducing your lab time. - High Detection Sensitivity: Experience even transfer and exceptional transfer efficiency for reliable results. - Flexible Formats: Compatible with various gel sizes and membrane types, offering versatility for various applications. - User-Friendly Design: Simplifies the transfer process with a straightforward interface, built-in tutorial, and application notes. - Custom Program Options: Create and manage custom transfer programs tailored to your specific needs. - Compact Transfer Stacks: High-quality, compact transfer stacks that include required buffers, eliminating the need for bulky setups. Specifications: - Application: Dry electroblotting for Western detection - Compatible Membranes: Nitrocellulose and PVDF - Transfer Time: Typically completed in 7 minutes - Preparation Time: Total time under 10 minutes per blot How It Works: - The innovative design incorporates buffer ion reservoirs directly into the gel matrix, which enhances the transfer process by leveraging high ion density for rapid protein migration. This method eliminates the need for preparation of additional buffers and minimizes user errors, making it ideal for busy laboratories

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: PNG2 4302HEX - 2200399999, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,974 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 84 m³/h, pump pressure: 1.8 bar, total width: 2,191 mm, total length: 4,449 mm, total height: 2,536 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit, Type: Phönix PNG2 4302 HEX (R513A) Manufacturer: MTA S.p.A. The Phönix PNG2 4302 HEX series are compact water chiller units designed for outdoor installation. Features include: - Shell-and-tube evaporator - Electronic expansion valves Iodowzay Tjpfx Aa Estr - Compressor shut-off valves - System with compressors and hydraulic sound insulation panels - Ambient operating temperature down to -20 °C - Buffer tank and twin P2 pump - Metal mesh protection filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 84 Available pump head (bar): 1.8 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R513A, GWP 631, safety class A1 Number of refrigeration circuits: 2 Number of compressors: 2 Capacity control (%): Variable from 12.5 to 100% Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Maximum power input (kW): 235 Maximum current (A): 385 Starting current per circuit (A): 467 Protection rating: IP54 Dimensions: Length (mm): 4449, Width (mm): 2191, Height (mm): 2536 Weight (kg): 4974 Connection: Victaulic DN 125 Serial No.: 2200399999 Year of manufacture: 2023 Condition: Visual: 2, Technical: ok & tested Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty On request, MTA offers a functional test of the chiller together with the buyer before collection at the Nettetal branch. Used machines may have visual defects due to prior use. (Technical specifications subject to change and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, This listing is for a Gilson Pipetman Liquid Handling Device. The unit is in full working condition and is ready for immediate release. Ijdpfexxx Sgsx Aa Ejtr The Gilson Pipetman Liquid Handling Device is a well-known, precision liquid handling device commonly used in laboratories for transferring small amounts of liquids. It is a type of micropipette used to measure and dispense a specific volume of liquid, typically in the range of microliters (μL) to milliliters (mL). The Pipetman series is renowned for its accuracy, reliability, and ease of use. Features: - Adjustable Volume: The Pipetman is designed to allow the user to set and adjust the volume it will dispense, which provides flexibility for a variety of tasks. It typically has a volume range from 0.1 µL to 10 mL depending on the model. - Single Channel: The standard version is a single-channel pipette, meaning it is designed to handle one sample at a time, although multi-channel models are also available for higher throughput. - Ergonomic Design: The Pipetman is designed with ergonomics in mind, making it comfortable to use for long periods, which is important for minimizing hand strain and improving productivity. - Precision and Accuracy: The Gilson Pipetman is known for its high precision, with many models offering accuracy and precision to within a small percentage of the desired volume, which is crucial in scientific experiments. - Durability: The Pipetman is robust and can withstand frequent use, making it ideal for laboratory environments. - Color-Coding: Pipetman models often use color-coded tips that correspond to different volume ranges, making it easier for users to select the correct pipette and tips for their needs.