Used Turbo Vakuum Pomp for sale (1,014)

Condition: used, power: 129 kW (175.39 HP), color: yellow, Equipment: air conditioning, Year of construction: 2019 Operating hours: 10.033 Number of cylinders: 6 Empty weight: 22.380 kg Engine type: Cummins QSB6.7 Selling price: € 46.500, US$ 51.770 = Additional options and accessories = - Autoradio Dsdpfxst E Rf So Acyowd - Bucket = Remarks = Used Hyundai HX220L tracked excavator for sale at CHESS This Hyundai HX220L is equipped with a 6 cilinder water cooled turbo charged Cummins QSB6.7 (129kW) diesel engine with 10.044 working hours on the service meter. Moreover the machine has hydraulics for hammer function hydraulic quick hitch grading bucket boxing ring extra work lights all round camera system electric diesel pump Hyundai HX220L ready for its next job! For more information please contact us

Condition: used, Equipment: air conditioning, Year of construction: 2019 Operating hours: 14.274 Empty weight: 38.000 kg = Additional options and accessories = - Mp-3 = Remarks = Used Sennebogen 830E Material Handler for sale This Sennebogen 830E is equipped with a 6 cilinder water cooled turbo charged Cummins B6.7 engine (168kW). Dutch machine with 14.274 hours on the service meter rails on upper carriage full rubber tires Dsdpfx Ajt E Rg Aocyjwd 4 stabilizers rear and side cameras joysticks steering radio and cabin air filter system Sennebogen 830M E for more information please contact us

Condition: used, power: 98 kW (133.24 HP), fuel type: diesel, Equipment: air conditioning, Year of construction: 2017 Operating hours: 7.030 Empty weight: 25.500 kg Engine type: Cummins QSB6.7 Availability: in stock = Additional options and accessories = Dwsdpfxst E Rp Re Acyed - Autoradio - Central lubrication = Remarks = Used Hyundai HX260NL tracked excavator for sale at CHESS This Hyundai HX260NL is 3 meters wide and is equipped with a 6 cilinder water cooled turbo charged Cummins QSB6.7 (133kW) diesel engine with 7.030 working hours on the service meter. Moreover the machine has OilQuick 70/55 hydraulic quick hitch extra work lights rear view camera system electric diesel pump Good working Hyundai HX260NL ready for inspection at our yard! For more information please contact us

Condition: used, Equipment: air conditioning, Year of construction: 2021 Dwjdpfx Aot E Rquocysd Operating hours: 1.103 Empty weight: 27.000 kg Selling price: € 67.500, US$ 75.460 = Additional options and accessories = - Autoradio = Remarks = Used Sany SY265C LC tracked excavator for sale at CHESS This Sany SY265C LC is equipped with a 6 cilinder water cooled turbo charged Cummins B6.7 (146kW) diesel engine with just 1.103 working hours on the service meter. Moreover machine has a hydraulic quick hitch grading bucket hydraulics for hammer and rotation electric diesel pump boxing ring rear and side camera’s additional work lights operator manual Like NEW Sany SY265C LC for more information please contact us

Condition: used, Equipment: air conditioning, Year of construction: 2014 Operating hours: 9.569 Empty weight: 22.500 kg Selling price: € 34.500, US$ 38.570 = Additional options and accessories = - Autoradio - Hydrohammer hydraulics - Reverse camera Dodpfx Aot E Rr Sscyjwd = Remarks = Used Kobelco SK210LC-9 tracked excavator for sale at CHESS Kobelco SK210LC-9 from 2014 (model 2015) with 9569 working hours on the service meter. Machine is equipped with a 4 cilinder water cooled turbo charged Hino J05-TJ (165HP / 2000rpm) diesel engine. Proper digging bucket rotation piping hydraulic quick hitch extra work lights additional books diesel pump etc Good working Kobelco SK210LC-9 with undercarriage being 35%. Digging bucket included ready for its next job! For more information please contact us

Condition: used, power: 129 kW (175.39 HP), fuel type: diesel, Equipment: air conditioning, Year of construction: 2017 Operating hours: 10.413 Number of cylinders: 6 Empty weight: 22.380 kg Engine type: Cummins QSB6.7 Selling price: € 42.500, US$ 47.320 = Additional options and accessories = Dwsdpfst E Rvdjx Acyod - Autoradio = Remarks = Used Hyundai HX220L tracked excavator for sale at CHESS This Hyundai HX220L is equipped with a 6 cilinder water cooled turbo charged Cummins QSB6.7 (129kW) diesel engine with 10.413 working hours on the service meter. Moreover the machine has hydraulics for hammer function hydraulic quick hitch grading bucket boxing ring extra work lights all round camera system electric diesel pump Hyundai HX220L ready for its next job! For more information please contact us

Condition: used, power: 160 kW (217.54 HP), fuel type: diesel, color: blue, Equipment: air conditioning, Year of construction: 2021 Operating hours: 7.974 Number of cylinders: 6 Empty weight: 35.500 kg Engine type: Deutz TCD6.1 = Additional options and accessories = - Autoradio - Central lubrication - Climate control - Intercoolor = Remarks = Used Fuchs MHL350F mobile material handler for sale at CHESS This Fuchs MHL350F is equipped with a 6 cilinder turbo charged water cooled Deutz TCD6.1 diesel engine (160kW) and is build in 2021. Machine has 7974 working hours on the service meter and a 8.5 meter boom + 7.2 meter stick which results in 16.1 meter reach. 4 outriggers cabin protection high rise cabin side and rear view camera full rubber tires cabin steps etc. Fuchs grab optional Dwodpfxst H Nbho Acyjd Nice Fuchs MHL350 as you can expect for age and hours machine operates without issues. Please contact us for more information!

Condition: used, Equipment: air conditioning, Year of construction: 2023 Operating hours: 3.324 Empty weight: 22.000 kg = Additional options and accessories = - Autoradio - Central lubrication Dwsdpfs Agu Ugjx Acysd = Remarks = Used Atlas 200MH wheeled material handler in stock at CHESS This Atlas 200MH is equipped with 4 cilinder water cooled turbo charged Deutz TCD 6.1 L6 (105kW) with just 3.324 working hours on the service meter. 6 meter boom 4 meter stick which results in a reach of 10 meters. Sorting and demolition grab included additional work lights cabin protection boxing ring full rubber tires 4 outriggers rear and side view camera system Like NEW Atlas 200MH which has done very little work. Ready to inspect in our yard. For more information please contact us

Condition: used, power: 148 kW (201.22 HP), fuel type: diesel, Equipment: air conditioning, Year of construction: 2011 Operating hours: 14.391 Number of cylinders: 6 Empty weight: 37.000 kg Engine type: Deutz TCD 2013 L06 2V = Additional options and accessories = Dwjdpfxs Agu Uno Acysd - Autoradio - Central lubrication = Remarks = Used Fuchs MHL350D + 1 meter pylon mobile material handler for sale at CHESS This Fuchs MHL350D is equipped with a 6 cilinder turbo charged water cooled Deutz TCD 2013 L06 2V diesel engine (148kW). Machine is from 2011 and has 14.391 working hours on the service meter. The machine has a 1 meter pylon that is currently detached for transport purposes. Moreover the machine has 4 outriggers high rise elevatable cabin camera system full rubber tires etc. Fuchs grab optional Fuchs MHL350D ready for inspection at our yard. Please contact us for more information!

Condition: used, power: 134 kW (182.19 HP), fuel type: diesel, color: yellow, Equipment: air conditioning, Year of construction: 2024 Operating hours: 4 Empty weight: 17.300 kg Bucket volume: 2.8 m^3 = Additional options and accessories = - Autoradio - Reverse camera = Remarks = Djdps Agvc Ssfx Acyowd Unused Volvo L90H wheel loader for sale at CHESS This Volvo L90H is equipped with a 6 cilinder water cooled turbo charged Volvo D6E (134kW) diesel engine. This machine is unused and has only 4 working hours on the service meter!! Brand new 2.8m³ Volvo bucket. This is a tier 3 machine produced in Sweden. More over it has the Volvo copilot system Bridgestone tires etc Brand new Volvo L90H wheel loader ready to work! For more information please contact us

Condition: used, fuel type: diesel, color: yellow, Equipment: air conditioning, Year of construction: 2009 Operating hours: 8.375 Number of cylinders: 6 Dwodpfxj Agvgks Acysd Empty weight: 24.000 kg Availability: in stock Bucket: Yes = Additional options and accessories = - Bucket - Hydrohammer hydraulics - Quick-change system - Reverse camera = Remarks = Used Cat 323DL tracked excavator for sale at CHESS This Cat 323DL is equipped with a 6 cilinder water cooled turbo charged Caterpillar C6.4 (110kW) diesel engine with just 8.375 working hours on the service meter. Moreover it has hydraulics for hammer and rotation function hydraulic quick hitch electric diesel pump etc Used Cat 323DL coming from a first owner ready for inspection at our yard. For more information please contact us!

Condition: used, Equipment: air conditioning, Year of construction: 2019 Operating hours: 9.966 Empty weight: 22.500 kg Selling price: € 46.900, US$ 52.210 Availability: in stock Bucket: Yes = Additional options and accessories = - Autoradio - Bucket = Remarks = Used JCB 220 XL 4F tracked excavator for sale at CHESS Dedo Agvgyopfx Acyswd This JCB 220 XL 4F is equipped with a 4 cylinder water cooled turbo charged JCB 448 TA4-129 E2C (129kW) diesel engine with 9.966 working hours on the service meter. Moreover this machine is equipped with an Engcon system (hydraulic tiltrotator tilt up to ±45 degrees and rotate infinitely but needs to be serviced) hydraulic quick coupler additional work lights diesel pump cab guards boxing ring etc JCB 220 XL 4F ready for inspection in our yard. For more information please contact us

Condition: used, power: 115 kW (156.36 HP), fuel type: diesel, color: white, Equipment: air conditioning, Operating hours: 13 Number of cylinders: 4 Empty weight: 25.000 kg Engine type: Deutz TCD4.1 L4 Availability: in stock = Additional options and accessories = - Autoradio - Climate control = Remarks = Dwodps Agvg Iofx Acyed Unused Terex Ecotec TWH226 S5 for sale at CHESS This Terex Ecotec TWH226 (model 2025) is 100% similar to Fuchs MHL335F only the colour is different Equipped with a 4 cilinder water cooled turbo charge Deutz TCD4.1 L4 diesel engine (115kW) with only 13 hours on the service meter New Terex comes with full rubber tires 4 outriggers high rise elevating cabin check valves extra work lights side and rear view camera additional books Fuchs MHL335F – Terex Ecotec TWH226 ready for inspection at our yard. For more information please contact us

Condition: used, power: 128 kW (174.03 HP), Equipment: air conditioning, Year of construction: 2021 Operating hours: 6.596 Number of cylinders: 4 Dedpfx Acs Ah Tg Asyswd Empty weight: 25.000 kg Selling price: € 59.500, US$ 66.520 Availability: in stock Bucket: Yes = Additional options and accessories = - Autoradio - Bucket = Remarks = Used Hitachi ZX225USLC-6 tracked excavator for sale at CHESS This Hitachi ZX225USLC-6 is equipped with a 4 cilinder water cooled turbo charged Isuzu AR-4HK1X (128KW) diesel engine with 6.596 working hours on the service meter. Moreover this machine hydraulic for hammer and rotation function OilQuick quick hitch cabin protection additional work lights rear and side view camera system additional books etc Hitachi ZX225USLC-6 ready for its next job! For more information please contact us

Condition: excellent (used), mileage: 25 km, power: 382 kW (519.37 HP), first registration: 04/2026, fuel type: diesel, axle configuration: 6x6, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: other, emission class: euro3, Equipment: air conditioning, electric window regulation, retarder, trailer coupling, = Additional Options and Accessories = - All-wheel drive - Leaf spring suspension - Intarder Dwodpfoyyyn Iex Acyjd - Cab - Sun visor - Power take-off (PTO) - Tow hitch = Further Information = Transmission: Continuously variable transmission Year of construction: 2026 Front axle: Steerable Number of cylinders: 6 GVWR: 180,000 kg Body manufacturer: TURBO RETARDER CLUTCH Technical condition: very good Optical condition: very good

Condition: used, mileage: 153,882 km, power: 130 kW (176.75 HP), first registration: 12/2020, fuel type: diesel, next inspection (TÜV): 10/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle for sale. If you are interested in this vehicle, please feel free to contact us by phone or email to arrange a viewing appointment. The vehicles are not always available on our premises. Dwsdpfe Aimhcsx Acyed The vehicle is located in HALLE(SAALE)! The vehicle is located in HALLE(SAALE)! The vehicle is located in HALLE(SAALE)! Special equipment: Storage compartment in the headliner of the driver's cab, storage compartments: luggage net on the rear doors, audio system: UConnect with Bluetooth, exterior mirrors electrically adjustable and heated, reinforced rear axle (suspension), automatic climate control, fuel tank: 90 liters, headlight surround black, seat cover/upholstery: Flockato fabric, seat base trim, pre-wiring for electrical superstructure Additional equipment: Airbag driver side, windows in the cargo/passenger compartment: - sliding, 2nd row, rear hinged doors with glazing, heated rear window, body/superstructure: standard high-roof combination van, padded headrests, heated crankcase ventilation, adjustable steering column (steering wheel), engine 2.3 L - 131 kW turbo diesel Multijet, wheelbase 4035 mm, tire repair kit, low emissions according to emission standard Euro 6d-TEMP, sliding door cargo/passenger compartment right with glazing, seats in the driver's cab: driver's seat with armrest and lumbar support, start/stop system engine, socket in the cargo/passenger compartment, auxiliary heater rear The vehicle is located in our external warehouse; therefore, please contact us to arrange a viewing. Thank you very much! Subject to price changes, typographical errors and errors, as well as prior sale.

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 01/2026, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 2,250 mm, loading space width: 1,832 mm, loading space height: 1,626 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * MAN TGE Individual, Lions paint finish * Hill start assist * Exhaust system, EU6e (EA) * Preparation for trailer hitch * Towing eye at the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Exterior mirrors, electrically adjustable, heated, and foldable * All-wheel drive 4x4 * Emergency brake assist * Battery 520 A (92 Ah) * Rubber floor covering in the driver's cab * Electronic parking brake * ESP with electronic differential lock, anti-slip regulation (ASR), and ABS * Stone chip protection (without Efficient Line, no CO2 optimization) * Normal roof * Differential lock for the rear axle (manually switchable, mechanical) * Immobilizer, electronic * Park steering assistant with front and rear parking sensors including side protection * Entry handles on the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with assistant headlights and coming/leaving home function * Electrical connection block and KFG with ABH programming * Premium interior noise damping measures * With UNECE CS&SU * 4-cylinder diesel engine, 2.0L, assembly 03N.G * ACC Stop & Go * 8-speed automatic transmission for 4x4 * Air conditioning system "Climatronic" in the driver's cab * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Child safety lock, electrically operated * Traffic sign recognition * Rear view camera system with dynamic guidance lines * Radiator grille, black with chrome trim * High beam assist "Light Assist" * Leather multi-function steering wheel, heated, with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Digital instrument cluster * Attention and fatigue detection system * MAN SmartLink * 4-cylinder turbo diesel engine, 2.0 l/130 kW (4V) BIT * Fog lights including cornering lights * Navigation system (Baseline) * MAN Connect (call services/in-vehicle apps/navigation, depending on device), with OCU high * 4 light alloy wheels 6 1/2 J x 17, with 1,200 kg load capacity, in black * 12-V socket and 2 cup holders in the dashboard * Tire pressure monitoring system * Tires 235/60 R17C 117/115 R, optimized for rolling resistance * Summer tires * Wheelbase standard 3,640 mm * Three-point automatic seat belts with height adjustment and electric belt tensioners in the front * Rear wing doors with enlarged opening angle * Side windows in front and rear, and rear window in heat-reflecting glass, darkened from the B-pillar (Privacy) * 12-V sockets in the driver's cab * Suspension seat "ergoActive" left and right * Seat belt warning, E-contact in the belt lock, driver and front passenger seat * Seat covers in "Toronto Grid" fabric * Seat heating for driver and front passenger seat, separately adjustable Djdpfx Ajwtwbfecyowd * Side marker lights * Approved as 3.5t * Start-stop system with brake energy recuperation * Lane change assist * Crosswind assist * Headlight cleaning system, washer fluid level indicator, heated windshield washer nozzles in front * Windshield wiper intermittent function with light and rain sensor * Keyless Go with SAFELOCK * Sliding door, right, with intermediate locking * Blind spot warning on both sides and exit warning * Turning assistant * Emergency assistant (Active Lane Keeping Assist and Emergency Assist and Traffic Jam Assist) * Preparation for alcohol interlock * Intelligent speed assist * With multi-function camera * Step ill

Condition: used, mileage: 33,156 km, power: 103 kW (140.04 HP), first registration: 07/2025, fuel type: diesel, color: silver, gearing type: mechanical, number of seats: 3, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * 5-year manufacturer's warranty for Germany, starting from the initial registration or up to 150,000 km * Trailer hitch included * Approved as a 3.5t vehicle * Long wheelbase * Permissible total weight * Standard climate control zones * Electronic Stability Program (ESP) * One towing eye in the front * Disc brakes in the front * Front-wheel drive * Multifunction steering wheel * Partition, without window * LNFZ version * Three-point automatic seatbelts in the front with electric belt pretensioner * High roof in vehicle color * Double bench seat in the driver's cabin on the right * Seat in the driver's cabin on the left * Special interior noise damping * Windshield, heat-protective glass * Central locking "Keyless-Go" without safe lock * Dashboard with special add-ons * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Exhaust system, WLTP3 N1-III, N2//EU6EA * Glove compartment standard * Rubber floor covering in the driver's cabin * Wooden floor in the cargo area * Side paneling standard * Approved as a truck * Sliding door on the right in the cargo/passenger compartment * Exterior mirrors left and right, convex plus wide-angle * Hinges for rear doors with enlarged opening angle * Lashing eyes for cargo securing * Lane assist * Radiator protection grille * C-rails, side, partition, and roof rails * Interior grab handle (entry at the partition) * Exterior mirrors, electrically foldable, electrically adjustable, separately heated * Immobilizer electronic * Entry handles on the rear pillar left and right * Tire pressure monitoring system, frequency 433 MHz High * Start/stop system with recuperation * Parking steering assistant * Side marker lights * Halogen twin headlights * Front Assist with warning and braking for vehicles, pedestrians, and cyclists * Windshield wiper interval control with light/rain sensor * Key for locking system with remote control * 4 speakers (passive) * Daytime running light control with assistance driving light * LED interior lighting concept in the passenger/cargo area * Preparation for Smart TCO * Seat belt control, E-contact in the belt lock * Wired & Wireless App-Connect * Operating voltage 12 V * Comfort telephony, without external antenna connection * 4-cylinder turbo diesel engine 2.0 L/103 kW (4V) TDI Common Rail * Online service, with OCU, without head unit coding, without WFS connection * Driver alertness system * With socket in the front * 6-speed manual gearbox * Preparation for alcohol interlock * Entry infotainment radio GP (UNECE) * Battery 520A (92Ah) Dwsdszv A Hcjpfx Acysd * With rear view camera system (version 2) * Air conditioning with electronic control * With side wind assist * Seat covers in fabric * With UNECE CS&SU * Pan-European eCall * Professional Assistance Package incl. parking steering assistant & parking assist in the front & rear area incl. side protection * With multifunction camera * Heat-protective glazing * With traffic sign recognition * With step * Digital radio reception * Cd value trim * Prepared for VW Connect and VW Connect Plus * 4-cylinder diesel engine 2.0L, aggregate 04L.Y * External, USB Type-C data and charging ports with increased charging power * Hill start assistant * Parking brake * All-season tires * Front axle "Standard" * Radio Composition with 26 cm (10.4") touch color display with 4 speakers Conversion service for panel van commercial vehicles possible: e.g. retrofitting trailer hitch 990.00 EUR, trailer load increase 714.00

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 2,200 kg, Equipment: documentation/manual, # TAKAMAZ SX-07 CNC lathe with FMB bar feeder – manufactured in 2002 For sale is a CNC lathe from the Japanese manufacturer TAKAMAZ, model SX-07, manufactured in 2002. The machine was fully functional until it was decommissioned and was subsequently professionally dismantled and stored. The complete system will be sold including the bar feeder magazine, chip conveyor, extraction system, and accessories. ## Technical data - Manufacturer: TAKAMAZ / Takamatsu Machinery - Model: SX-07 - Year of manufacture: 2002 - Control: FANUC Series 21i-T - Serial number: 940011 - Machine weight: 2,200 kg according to the nameplate - Tool turret - Main and counter spindle ## Operating data according to the control system - Control system switched on: 95,815 hours - Feed time: 23,599 hours - Total part counter: 8,324,144 pieces ## Equipment - FMB Turbo 3-26 bar feeder magazine (year of manufacture unknown) - Chip conveyor - Extraction system Dsdpfo Ah Eitox Acyowd - Various tool holders and accessories as shown in the pictures - Operating manual available ## Condition and inspection The machine was fully functional until it was dismantled. It has already been dismantled and stored, but can be powered up for inspection. A complete machining demonstration cannot be guaranteed in the stored condition. Inspection is possible after prior appointment. Sale from warehouse. Loading and transport by arrangement.

Year of construction: 1993, condition: used, Empty weight: 9.300 kg Dwjdoz R S Thopfx Acyed Dimensions (LxBxH): 442 x 280 x 195 cm Serial number: 210045 Cutting force: 20 metric tons, 200 kN Maximum sheet thickness for punching and nibbling: 6.4 mm Maximum punch diameter: 88.9 mm Working range in the transverse direction (X-axis): 1,270 / 2,540 mm Working range in the longitudinal direction (Y-axis): 1,000 mm Control system: Fanuc 16P Tool changer: yes Number of tool stations: 19 positions (16 fixed + 3 index) Required power connection: 23 kVA Turret revolver with 16 + 3 x Auto Index Holders Length: 4,425 mm Width: 2800 mm Height: 1950 mm Weight: 9300 kg Central lubrication: yes Condition: fully serviced and overhauled Additional loading charges may apply Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Width: 60 cm Complete roll forming line equipped with tools for the production of a new type of industrial gutter for galvanized steel/stainless steel CE compliant Uncoiler capacity: 2 metric tons maximum width: 600 mm inner and outer coil diameter: 508–920 mm hydraulic jaw expansion: 460–640 mm 4 kW Roll forming line Type H 18 stations maximum width: 600 mm maximum thickness: 0.8 mm shaft diameter: 60 mm maximum center-to-center shaft distance: 300 mm Siemens Simatic touchscreen control + Ethernet connection 7.5 kW Djdpfx Aez R S T Uecyjwd Hydraulic shear Force: 5 metric tons Condition: machine has seen very little use; new value 450,000 euros Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2014, functionality: fully functional, 4-AXIS CNC TURNING CENTER • Color: Light gray/anthracite RAL7035, 7016 • Main spindle 26 kW • Counter spindle AS 11 kW • Bar diameter 65 mm • Control system Fanuc 31i B-5 • Counter spindle can be lowered • 2 Y-axes *50/-40 mm, 4-way guided • X-axes with flat guide • 2 turrets with 12 tool stations each • 24 powered tool stations. Torque 47 Nm. • 2 C-axes • Bar loader interface • Controlled parts catcher, can be used for main and counter spindles • Finished parts conveyor belt, installed lengthwise, 500 mm long • Hinged belt chip conveyor with discharge height of 820 mm • 2 coolant pumps at 7 bar including filter • Foot switch for chuck operation on the main spindle • Internal flushing system with 4-bar pump • Flushing gun, 4 bar, for cleaning the work area • Intelligent handwheel Program execution with simultaneous movement of all axes MACHINE EQUIPMENT - Conveyor belt for machined parts Belt width/length 300x800 mm, Discharge on the operator side - Measuring probe, swiveling, with 2 heads for tool measurement Turret, top and bottom - High-pressure coolant pump, 18 bar for 2 turrets incl. coolant filter Pump capacity 20 l/min - MANUAL GUIDE i, dialog programming Turning/milling cycle, 3D simulation Manual (on CD) - SBS tool breakage and wear monitoring - Programmable axis mirroring Bar loader magazine Bar loader magazine FMB turbo 5-55 Bar length max. 3200 mm Oil lubrication for the bar Bars 5-55 / turned down to 50 mm Loading level 250 mm Guided by roller guide, can be changed to guide chuck (polygonal) Dsdpfxe Ah Scno Acyowd Precise positioning during insertion Interval mode for polygonal material Residual piece ejection to the rear (max. 530 mm)

Condition: used, Year of construction: 2019, functionality: fully functional, Sputtering System – Aurion Plant Technology Manufacturer: Aurion Plant Technology System Type: B-VPA-28 Serial Number: 302343 Dodpfxo Ah Tlgj Acyswd Technical Data and Equipment The sputtering system has a total weight of approximately 7,000 kg and dimensions of 6,217 × 3,500 × 2,100 mm (W × D × H), each without vacuum pumps. The chamber volume is approximately 670 liters. The maximum ambient temperature is 25 °C. The electrical mains connection is with 400/230 V at 50 Hz. The connection power is approximately 100 kVA with a current draw of approximately 125 A. Substrate and Heating System Substrate dimensions: 38 × 31 × 1.08 mm Transport pallets: 416.9 × 504.5 mm Capacity: 144 substrates per transport pallet Substrate heating up to a maximum of 250 °C Vacuum and Process Gas System Achievable final pressure: < 1 × 10⁻⁷ hPa Process gas: Argon 2 Bronkhorst F-201CS flow controllers, each with 500 mln/min Coating System 2 DC generators ADL GX 150/800, each with 15 kW Vacuum components (Pfeiffer Vacuum) 4 × Roughing pump DUO 35 2 × Roughing pump DUO 65 2 × Rotary vane pump Okta 500 3 × Turbo pump HiPace 1200 U 1 × Turbo pump HiPace 2300 U Valve technology from VAT Control and Automation Technology The system control is based on a Siemens SIMATIC S7 controller and includes a panel PC with WinCC for operation and process visualization.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Dedoz Uxmbopfx Acyowd Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*

Condition: good (used), mileage: 473,158 km, power: 368 kW (500.34 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 10x4, wheelbase: 7,490 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,090 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 9,500 kg, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, power assisted steering, power mirror, - Brake booster Dwedpfx Aszxglzjcyed - Differential lock - High beam - Windshield - Low noise - Speed limiter - Air conditioning - Air horn - Rotating beacon - Rear view camera - Sun visor - Toolbox - Power take-off (PTO) General information Year of construction: 2019 Registration number: 20-BNK-9 Technical information Number of cylinders: 6 Engine displacement: 12,882 cc Axle configuration Maximum front axle load: 10,000 kg Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Max. axle load: 9,500 kg Rear axle 3: Max. axle load: 9,500 kg Rear axle 4: Lift axle; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 19,025 kg Payload: 29,975 kg GVW: 49,000 kg Functional Body manufacturer: PIET RUIZEVELD REAR TIPPER WITH FLAPS Tipper: Rear Condition Technical condition: good Optical condition: good IVECO TRAKKER 500 E6 10x4 TIPPER Geurts Trucks B.V. presents this exceptionally well-maintained and excellently serviced IVECO Trakker 500 Euro 6 10x4 rear tipper. This vehicle was specially developed for professional use in earthmoving, road and civil engineering, quarrying, mining, and for the transport of heavy bulk goods. The Trakker is powered by a powerful IVECO Cursor 13 six-cylinder turbo diesel engine with 500 hp (368 kW) in combination with a fully automatic transmission, which combines the highest driving comfort with optimal power transmission. The robust 10x4 configuration ensures maximum traction and reliability – even under the most difficult operating conditions. General data * Manufacturer: IVECO * Model: Trakker 500 E6 * Axle configuration: 10x4 * First registration: 07.06.2019 * Emission class: Euro 6 * Mileage: 473,158 km * Engine power: 500 hp (368 kW) * Engine: IVECO Cursor 13, 6-cylinder turbo diesel * Transmission: Fully automatic * Cab: Day cab * Color: Original factory paint Chassis and drive The extremely stable chassis was designed for the highest loads in daily use on construction sites. Equipment: * 10x4 axle configuration * Air-suspended rear axles * Differential locks * High off-road capability * High payload * Robust frame construction * Optimal weight distribution * Excellent driving characteristics on the road and on construction sites Cab The comfortable day cab offers the driver an ergonomic and safe workplace. Equipment: * Pressurized system for dust-free cabin air * Air conditioning * Fully automatic transmission * Comfort driver's seat * Adjustable steering wheel * Electric windows * Electrically adjustable and heated exterior mirrors * On-board computer * Multi-function instruments * Central locking * Numerous storage compartments * Excellent all-round visibility Tipper body The vehicle is equipped with a high-quality Piet Ruizeveld rear tipper, which was specially designed for daily heavy-duty operation. Technical data: * Body manufacturer: Piet Ruizeveld * Design: Rear tipper * Tipper bed made of highly wear-resistant Hardox steel * Loading volume: approx. 26...