Used Spray Paint Automat for sale (25,856)

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit Nsdpfx Aceyxhq Usmslc - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Dittel HBA 4000 Hydro-Balance-Automat, serial number: 344-7998, part number: 812/101B, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nlsdpjkak E Asfx Acmoc

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, year of last overhaul: 2026, Dough divider and forming machine Roll former for bread rolls Fortuna Automatic, Size 3 Nljdpfx Ajuyb Tkecmsc Dough head newly refurbished with stainless steel knife, NEW robust technology Electrical system, NEW only available from us, DGUV V3 tested Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine, overhauled & SAB tested Option: Platform or mobile base Maintenance contract Warranty Spare parts box Training & commissioning Leasing & rental service TOP roll formers in stock!

Condition: used, cutting diameter / mm saw band length 8800 mm cutting width / mm total power requirement / kW Nodpfxjzcgkms Acmelc weight of the machine ca. / t required space / m

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete Nledpfow Dgi Tjx Acmoc - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, OPPORTUNITY – IMMEDIATELY AVAILABLE Njdpfxexwqm Hs Acmslc HYDRAULIC HIGH PERFORMANCE BAND SAWING LINE MANUFACTURER: BEHRINGER MODEL: HBM 440 A PC-E YEAR OF MANUFACTURE: 2015 Sawing capacity round: 440 mm Sawing capacity flat (W x H): 440 x 440 mm Minimum round / flat: 30 mm / 20 x 20 mm Saw blade dimension: 6700 x 54 x 1.1 mm Drive power: 11 kW Cutting speed: 20 – 200 m/min Material feed per stroke: 600 mm Material feed, multiple: max. 5400 mm Machine weight: 8,200 kg Dimensions (L x W x H): 6500 x 5000 x 2700 mm Transport height: 2400 mm Specifications subject to change – errors excepted Equipment: - Coolant system 200 l - Full enclosure of the saw - Material infeed support, 1650 mm length - Chip conveyor - BEHRINGER CNC dialogue computer IP 65, BEHRINGER dialogue control IP 65 - Automatic bar change - Sorting unit in portal design: - Usable stroke of gripper: 4660 mm - Depth of storage: 2000 mm - Max. cut-off length: 4000 mm - Max. single workpiece weight: 1500 kg - Infeed magazine KM 45 F-VR / 600-6,200: - Round material: 50 – 440 mm - Flat material: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Powered roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence PRIOR SALE AND AVAILABILITY RESERVED

Condition: good (used), Year of construction: 2003, saw band length 2910 x 27 x 0,90 mm Control Kasto CompactControll capacity 90 degrees: round 260 mm capacity 90 degrees: flat 300 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 200 mm capacity 60 degrees: round 165 mm cutting speed 20-110 m/min min. dia. 10 mm Cutting Length min. 6 mm total power requirement 2,5 kW weight of the machine ca. 0,86 t dimensions of the machine ca. 1,8 x 1,8 x 1,7 m Fully automatic band saw (CNC) Includes right-hand roller conveyor with programmable stop carriage & digital display: Stop positioning is handled by the integrated measuring system, with the position shown to millimeter precision on the separate display. Dimensions (L x W x H): 2.70 x 1.10 x 1.70 m. Max. measuring length: 2.30 m. Includes hydraulic clamping and feed unit Includes coolant system Includes work light Includes small parts and spare parts Nljdpfx Ajzgxf Necmec Includes 2 band saw blades Includes operating manuals

Condition: used, 1 unit of fully automatic automatic transmission flushing machine, FLO-DYNAMICS TSD 450, with various accessories Nodjzdf Iaopfx Acmelc Color: as shown in the pictures, according to the images and inspection Condition: used Location of goods: Hall 1 Payment method: prepayment by bank transfer Shipping: Self-collection only from the Hofgeismar location

Condition: used, mileage: 80,000 km, power: 103 kW (140.04 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,204 mm, total width: 2,098 mm, total height: 2,312 mm, loading space length: 3,550 mm, loading space width: 2,050 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 8318 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany. Always over 400 vehicles immediately available. Largest selection - Best price. More than 1,000 satisfied customers per year - Top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----1. Owner, German vehicle, non-smoking vehicle Completely serviced only by Volkswagen New brakes front and rear New all-weather tires rear Automatic transmission Body: Trunk Massage seat for driver ---- Optional equipment: * Storage package 2 * Storage compartments: 2 DIN slots at the front under the headliner * Interior lights in the driver's cab: reading light at the front * Discover Media audio navigation system (touchscreen color display) * Voice control system * Bluetooth mobile phone interface * USB multimedia interface (iPhone/iPod) with AUX-IN * Volkswagen Media Control and App Connect * Lockable glove compartment * Light + Sight equipment package * Driving assistance system: High beam control (Light Assist) * Rain sensor * Automatic headlight control * Light assist (Coming Home, Leaving Home) Nedswc Hztjpfx Acmjlc * Driving assistance package 2 * Driving assistance system: Area monitoring system (Front Assist) with City Emergency Braking * Driver assistance system: City emergency braking function * Driver assistance system: Adaptive Cruise Control with vehicle stop function (ACC including follow-to-stop) * Driver assistance system: Drowsiness detection sensor * Multifunction steering wheel * Driver assistance system: Lane assist * Driver/passenger airbag, passenger airbag can be deactivated * Electric exterior mirrors Adjustable and heated * Onboard tools and jack * Chassis: Reinforced damping and stabilizers, front and rear * Heated windshield * Folding remote control keys (2) * Driver's cab floor mats: Rubber * Climatic air conditioning (driver's cab) * Position lights (roof) * Spare tire in standard tires * Rear view camera setup * Driver's cab seats: Double passenger seat with storage compartment * Driver's cab seats: Heated driver and passenger seats * Driver's cab seats: ErgoActive suspension seat, driver's side (20-way seat adjustment, massage function) * Rear underbody protection * 3rd brake light setup * Reinforced front axle * Seat belt warning system (driver/passenger side) * Auxiliary heating (air) Standard equipment: Anti-lock braking system (ABS), Drive type: Front-wheel drive, Convex exterior mirror, left, Convex exterior mirror, right, LED indicators integrated in exterior mirrors, floor covering in driver's cab: rubber, dual headlights, Electronic Stability Program (ESP), driver assistance system: Hill Start Assist, driver assistance system: Brake Assist (HBA), electric front windows, automatic transmission (8-speed), grab handles on A-pillars, interior lights in driver's cab: LED, body/structure: flatbed, fuel tank: 75 liters, radiator grille with chrome strip on top, adjustable steering column (steering wheel), headlight range control, truck registration, side marker lights, engine 2.0 liters - 103 kW TDI, multifunction display Plus, rear fog light, wheelbase 3640 mm, particulate filter, low emissions according to Euro 6 emissions standard, SCR system (AdBlue technology), electro-mechanical power steering, seat cover/upholstery: fabric, engine start/stop system, front bumper in gray with cover in body color, daytime running lights, white

Condition: used, Year of construction: 1990, Airflow rate: 1500 / 3000 m³/h Storage location: Nattheim Nsdpfx Acjzgi R Ajmjlc

Year of construction: 1979, condition: used, saw blade diameter 450/500 mm Nledpeilfp Nofx Acmsc cutting diameter mm stroke mm total power requirement 3,6 kW weight of the machine ca. 1130 t dimensions of the machine ca. m - Circular saw - semiautomatic - hydraulic

Year of construction: 2003, condition: used, cutting capacity - round 300 mm dimensions of saw-band 3320 x 27 x 0,9 mm cutting capacity - flat 330 x 260 mm cutting capacity - square 260 mm Control evolution work height max. 870 mm 40 / 80 mt/min weight of the machine ca. 1050 kg Nodpfxsra Rrlj Acmjlc

Condition: used, Year of construction: 1985, cutting diameter 340 mm dimensions of saw-blade 4860 x 32 x 1,1 mm cutting range square 340 x 340 mm cutting speed 17 - 120 m/min drive motor 4 kW weight of the machine ca. 2,5 t dimensions ca. 2600 x 2600 x 1650 mm ncl. chip conveyor and chip tray Hydraulic bundle clamping device incl. electrical circuit diagrams the previous owner only sawed at one speed Adjustable cutting pressure valve HSS bimetal saw band Hydraulic material and saw band tensioning with electrical monitoring Automatic height adjustment of the saw frame Automatic adjustment of the movable band guide arm Electrical piece counter Digital display of the dimension preselection Nlodewyfa Aspfx Acmoc Constant, hydraulic clamping of the carbide band guides

Condition: used, Year of construction: 1997, rate of flow 34 l/min Nledpfxjd Ih R Hj Acmoc 28 : 1 7 bar

Condition: used, Year of construction: 1997, cutting diameter 520 mm saw band length 7239 mm cutting range square 520 x 520 mm Nsdpfjxfwd Ijx Acmjlc feed length 500 mm feed length 4500 mm cutting length min. 6 mm 10/100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm weight of the machine ca. 4,2 t dimensions 2300 x 3420 x 2385 m Control MINIPOS 807 CNC control Minipos 807 Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws

Condition: used, Year of construction: 2006, functionality: fully functional, cutting range enlargement up to 800 round steel roll conveyor coolant device chip conveyor Technische Daten: Schnittbereich rund / cutting range round 800 mm Schnittbereich vierkant /cutting range square 830x730 mm Schnittgeschwindigkeit stufenlos / cutting speed stepless 12-120 m/min. Sägebandlänge / dimensions of the saw band 9195x67x1,6 mm Gesamtantriebsleistung / drive capacity 23 kW Gewicht der Maschine ca. / weight 11600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Nlodpfx Asy Alhfjcmoc Technical data, accessories and description of the machine are not binding.

Condition: good (used), Ward turret lathe Chuck diameter: 200 mm Turning diameter bed: 290 mm Nedpfx Acsq H Aqqjmelc Support turning diameter: 170 mm Stroke: 185 mm Clearance: 32 mm Dimensions: 205x105x135 cm LxWxH

Year of construction: 2012, condition: excellent (used), Automatic pallet wrappers Film pre-stretching Inventory No. 3893 Nodpfszd Hwusx Acmelc Manufacturer: Lantech Type: Q 300 XT * Year of manufacture 2012 * Turntable positioning via fixed stop * Number of bottom and top wraps * Turntable diameter 1650 mm * Max. wrapping height approx. 2030 mm * Own weight approx. 490 kg * In very good condition

Condition: used, Year of construction: 1993, functionality: fully functional, Intended use: For the automatic winding of wire onto spools. The twin spooler is suitable for use behind a drawing machine and inline annealing furnace. Technical details: Control system: Siemens S5 Materials processed so far: CU - AL, AL alloys for spools 630 mm Number of spooling stations: 2 Technical condition: HMI, main motor controller, lay-on motor, and transport motor renewed Wire diameter min: 1 mm Wire diameter max: 3.5 mm Spool flange diameter max: 762 mm Total spool width max: 472 mm Spool bore diameter max: 127 mm Spool axis: horizontal Spool change: automatic Spool speed: 2200 min⁻¹ Automatic shutdown in case of wire breakage and full spool: yes Lay-on system: available Arbor clamping: hydraulic Drive type: DC motor Controller manufacturer: Siemens Drive power: 2 x 35 kW Drive speed: 2370 min⁻¹ Operating voltage: 380 V Frequency: 50 Hz Electrical cabinet: available Additional data: Spool change: Fully automatic Empty spool feeding via conveyor belt. Full spool unloading via spool table and conveyor belt. Consisting of: Nljdpfxezf Ak Hs Acmsc NIEHOFF VM 400 dancer Electrical cabinet

Condition: used, Supply air unit type 3072 A 7300/3650 m³/h, max. heating capacity 83 kW, hot water 90/70 °C. Exhaust air unit type 72 7000/3500 m³/h. Storage location: Nattheim. Nsdpfx Acjw I A N Ajmjlc

Condition: used, Tornos CNC-controlled multi-spindle turning center Type/Model: Torno Multi Deco 20.8 Condition: Used, very well maintained Machine hours: approx. 65,724 h Technical data: Bar diameter: 5-20 mm Max. part length (without secondary operation): 100 mm Max. part length (with secondary operation): 80 mm Spindle rotational speed: up to 5,000 rpm Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Number of numerical axes: 22 Facing slide (axial): 2 Cross slide (radial + axial): 5 Longitudinal slide: 7 Njdozgw Aaopfx Acmjlc Parting slide: 1 Counter spindle motor power: 1.1 kW Dimensions (L x W x H): approx. 5,880 x 1,400 x 1,950 mm Weight: approx. 7,200 kg

Condition: used, Year of construction: 1981, Tornos 8-spindle bar feeder, mechanically controlled Type/Model: Tornos B20 Condition: Used Year of manufacture: 1981 Technical data Max. bar diameter: round 20 mm Max. bar diameter: square 15 mm Max. bar diameter: hexagon 19 mm Max. machining length (bar feed): 60 mm Number of spindles: 8 multi-spindle Spindle speed: 20 steps from 620 to max. 6,035 rpm Number of cross slides: 8 (one per spindle) Production rate: Max. up to 50 parts per minute Dimensions (L x W x H): approx. 2465 mm x 1200 mm x 1700 mm Weight: approx. 5,900 kg Equipment / Accessories: Retrofitted with 2 CNC slides at positions 3 and 6 Complete control cabinet modernization Modification of the cam shaft with continuously adjustable servo drive Main spindle with spindle brake Nedpezgwv Tofx Acmelc

Condition: used, Year of construction: 2008, Motor spindle turning machine: Tornos Type/Model: MultiAlpha 8x20 Condition: used Year of manufacture: 2008 Machine hours: 45017 h Technical data Capacities & travels Bar diameter (round material): up to max. 22 mm Nlodpezgwp Hofx Acmsc (with turned bars up to max. 25 mm) Workpiece length: max. 100 mm Longitudinal travel (Z-axis): 80 mm Cross slide travel (X-axis): 50 mm End units (longitudinal slide): 200 mm Spindle & axes Main spindle: 8 independently driven motor spindles Counter spindles: one counter spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axes: 34 axes Tool slide: 7 cross slides X/Y (position 1 - 7); 1 facing slide X (position 8); 7 longitudinal slides (position 1-7) Drive power & speeds Speed of main spindles: 0 - 8,000 rpm Power of main spindle motor: 11.2 kW Torque of main spindle: 17 Nm (optional up to 25 Nm) Speed of counter spindle: max. 8,000 rpm Power of counter spindle motor: 3.7 kW Torque of counter spindle: 8.3 Nm Equipment / accessories: Fanuc 30i control system 4x Motoquill 8x Fixed drilling spindle with Modular 40 mount Base holder Göltenbodt (fixed to axes) Knoll system with turbo filter system Manipulator for part handling max. bar diameter Ø 20 mm max. part length 100 mm 1 x Y-axis installable

Condition: used, Liquidation of an automotive paint shop with various painting and workshop accessories, all in working order: a. BYK paint measuring device “Automatchic Vision” 7060 (345 000 010) b. Scale c. Mixing station with scale and printer d. REGAL paint manufacturing unit including remaining paints/coatings as shown in the photo The paint booth/painting system is not included in the offer but can also be purchased. Condition: Used, in working order Further equipment available for inspection/removal on site. Also available in combination with the paint booth. Nlodpfjy Tyykjx Acmjc Location: Ravensburg

Condition: excellent (used), - Dimensions (LxWxH): 500x300x250 mm - Output: 4-6 kg - Serial Number: L17000531 Iiedjwyc Ukscu T Rxiei - Year: 2017 - Voltage: 400V - Power: 0.65 kW - Weight: 27 kg - Condition: New, never used The listing was translated automatically. Translation errors are possible. Nljdpfx Acowyc Ukomec