Used Spit 352 for sale (452)

Condition: used, Demonstration unit Condition: as new Contents: Carry case Device User manual Bit This item is an unused display model Dedpfxezk Ntre Ah Nowa

Condition: used, Demonstration unit Condition: as new Dodpfx Ahozk Nkws Nswa Contents: Carry case Device User manual Bit This item is an unused display model

Condition: used, Year of construction: 2019, MEP Tiger 352 SX EVO Cut Off Saw, 4000mm Roller Conveyor with Length Stop, Weight 410kg. S/No. 562821/31B (2019) Dwedpfjzr I Ahex Ah Nsa Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2021, operating hours: 5,300 h, Tracked excavator CAT 352-07 The machine has only 5,300 operating hours and is in good condition Dsdpfx Asyy Hvxjh Nowa Operating weight approx. 52,800 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 21064627/F, saw blade diameter: 350 mm, saw blade speed: 3,500 rpm, rotational speed (min.): 1,700 rpm, rotational speed (max.): 3,500 rpm, MEP Circular Saw Cobra 352 MA Dedpszm Thrjfx Ah Newa

Condition: good (used), functionality: fully functional, Year of construction: 2004, operating hours: 6,700 h, load capacity: 8,000 kg, fuel type: gas, motor manufacturer: Perkins, DGUV certified until: 07/2026, empty load weight: 12,500 kg, total height: 3,800 mm, Linde H80T in good condition for sale as shown in the photos. Only 6700 operating hours, verifiable! This is one of the last models without extensive electronics, etc. (Perkins engine). Dedpsw Eyb Ssfx Ah Njwa - Load capacity: 8,000 kg - Own weight: 12,540 kg - 3rd and 4th hydraulic circuits up to the fork carriage available - Valid UVV inspection sticker - Year of manufacture: 2004 - Overall height approx. 380 cm (Mast can be tilted forward for transport or fully dismantled as agreed) Please feel free to contact us anytime with any questions.

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 7,444 h, load capacity: 4,800 kg, lifting height: 4,500 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, fork length: 1,150 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Djdpfozriyzjx Ah Njwa Speed class: 30 Condition: Ready for operation and fully functional Technical condition: good Load guard, sideshift, fork positioner, 3rd valve, 4th valve,

Condition: ready for operation (used), Süd - Electric fan motor type EL 352, 110 V, 2.4 A, 50 Hz, serial number: 606272, used, normal signs of use, 100% functional, scope of delivery as shown in the photos. Djdpsx Dwdxefx Ah Nswa

Condition: ready for operation (used), Balluff BIS M-352-001-S115 RFID HF Reader BIS00NY SN: 84872, used, minor signs of wear, 100% functional, scope of delivery as per photos. Dwodpfx Ahjy Np Ebe Nea

Condition: ready for operation (used), Balluff BIS M-352-001-S115 RFID HF Reader BIS00NY SN: 84877, used, minor signs of wear, 100% functional, scope of delivery as per photos. Dwedpfoy Np Ehox Ah Noa

Condition: good (used), functionality: fully functional, SIA AM 352 A Vacuum Mixer Dwodozdqyyjpfx Ah Nja The SIA AM 352 A mixer is a vacuum mixer with a capacity of 350 liters. It contains a cylindrical container with a hemispherical bottom, inside which there are propellers, which allows you to mix and whip all kinds of preparations without pressure or friction, and to distribute all the ingredients of the mixture perfectly and in a very short time. The product is ejected by the hydraulic tilting of the mixing bowl. The control takes place via the control panel, where we can monitor and adjust the device to our requirements. The device is made of stainless steel and acid-resistant materials. The machine will be delivered with a lift. Manufacturer: SIA Model: AM 352 A Capacity: 350 liter / 250kg. Mixing system: Paddle Power: 5,1kW / 50Hz / 400V Machine dimensions LxWxH: 1.790x1.500x1.450 mm Machine weight: 750 kg.

Condition: used, Year of construction: 2017, capacity 90 degrees: round 120 mm Djdpfxoy Ruvbe Ah Njwa capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm 110 mm 95 mm 135x60 mm 120 mm 100 mm 135x60 mm 180 mm dimensions of saw-blade 350x32x3,4 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg

Condition: used, Year of construction: 2013, Second hand automatic shape glass cutting table (jumbo), BOTTERO Type 352 BCS-J, Year 2013 Dwsdpfxjwfhids Ah Nja

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG60SB-13594, total width: 4,030 mm, total length: 7,000 mm, overall weight: 2,500 kg, input current: 11 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 3,300 mm, feed length Y-axis: 6,100 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Bottero float cutting table (shapes) 2-19mm, max cutting size L6100x3300mm Dimensions: L7000xW4030mm, weight +/-2500Kg Dwodpfx Ahexrmpmo Nsa

Year of construction: 2015, condition: ready for operation (used), A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible. Dwedszf Ncpspfx Ah Nsa

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 17370, functionality: fully functional, TIGER 352 SX EVO - SEMI-AUTOMATIC Dodpfjy T Eh Tjx Ah Nowa HIGH-CAPACITY > The robust cast iron frame absorbs vibrations and ensures consistent cutting quality as well as a longer service life for the saw blade. > The two-stage gearbox ensures high cutting performance and rigidity. > The pneumatic vertical vice ensures efficient and secure clamping, even when cutting pipes. > The control panel, equipped with a thermal relay and minimum voltage coil, guarantees the highest level of protection. In combination with an automatic pusher stop and label printing, the machine is the optimal solution for sawing your reinforcing steel in PVC window construction. The machine is still in use until June. It can be inspected at the customer's site in 49811.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO Dwsdpfx Ajxdr Rtoh Nja - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: excellent (used), Year of construction: 2014, MEP Cobra 352 MA cold circular saw in very good condition. Dwsdpfx Asyzbmnoh Nea Year of manufacture: 2014 Shipping is possible.

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade Dsdsyu U Dfepfx Ah Newa - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,210 t dimensions 0,9 x 1,4 x 1,4 m Manual circular saw machine for sawing aluminum, miter cuts 45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. •Roller-bearing rotary table for quick and precise miter adjustment •Screw lock to lock the saw head in any angle position •Automatic saw blade lubrication •Clamping system consisting of two vices Dwedpfx Ahjfc T Ufe Nja •Saw head locking in the upper position •Adjustable length stop for cuts of the same length •Vice opening 180 mm

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Aktionspreis 2026 Inkl. base frame !!! Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Dedpfefmck Hox Ah Nswa Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm Dedpfexaai Nox Ah Nowa capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm links capacity 45 degrees: round 110 mm rechts capacity 45 degrees: square 100 mm links capacity 45 degrees: square 95 mm rechts capacity 45 degrees: flat 135 x 60 mm dimensions of saw-blade 350 x 32 turning speeds 1700 / 3400 U/min capacity 45 degrees: round 120 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 210 kg dimensions of the machine ca. 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The head can also be tilted up to 45 ° - Powerful, 2-stage drive with double V-belts - large turntable with bearings - Lubrication device with mechanical diaphragm pump - Extraction nozzle for connecting a chip extractor Scope of delivery: - Adjustable length stop 600 mm - tool kit - Instructions with wiring diagram - Crane eyes for transport * The machine is delivered without a saw blade Special accessories: - including base

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP CNC total power requirement 2.6 / 3.5 kW weight of the machine ca. 605 kg range L-W-H 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Dsdsxaa Uxepfx Ah Njwa Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm capacity degrees: round 110 mm capacity 60 degrees: round .0 mm capacity degrees: square 95 x 95 mm capacity degrees: square 95 x 95 mm capacity 60 degrees: square x mm capacity degrees: flat 180 x 95 mm capacity degrees: flat 125 x 95 mm capacity 60 degrees: flat x mm Djdpfxsxabd Ij Ah Nowa

Condition: new, saw blade diameter 350 x 32 mm Djdpfxoxaa Hno Ah Njwa capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP NC total power requirement 1.5 / 2.2 kW weight of the machine ca. 290 kg range L-W-H 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!