Used Soft Jaws for sale (4,082)

Condition: new, Siemens 6ES7842-0CE00-0YE0 Software SN S VPWN1005742,unused, in sealed original box, 100% functional, scope of delivery according to photos Nwjdpfx Akepnpn Tsijn

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -2 set: hard jaws -7 set: soft jaws -Dimensions: see photos / technical. drawing -Price/sale: only complete -Transport dimensions: 700/450/H120 mm -Weight: 101.6 kg Nedeqyi U Sspfx Akiown

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 34 mm -Dimensions: see photo technical. drawing Nwodpfx Asq Tvpmskien -Total dimensions: 131/102/H80 mm -Total weight: 5,4 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm Nedpfx Aoq Tvqkskiown -Dimensions: see photo techn. drawing -Dimensions: 90/96/H68 mm -Total weight: 2.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available Nwodpfx Akjq Tvqveion -Dimensions total: 78/78/H75 mm -Total weight: 2.5 kg/set

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 240 mm -Passage: Ø 77 mm Nedpfoqqpinox Akijwn -Hole circle: Ø 220 mm -Weight: 18 kg

Condition: ready for operation (used), Outer Ø: 130 mm Nodpfohq Ty Uex Akiewn Bore: 25 mm Short taper Camlock size D1-4"

Condition: ready for operation (used), Outer Diameter: 315 mm Nwodpfx Akod H Ilteien Boring: 95 mm hight: 112 mm weight: 54 kg

Condition: ready for operation (used), Outer Diameter: 315 mm boring: 103 mm Njdsd H Ilyepfx Akijwn hight: 120 mm weight: 54 kg

Condition: new, 4 – Unused chuck jaws Diameter: 320 mm Mounting: KK 8 (140 mm) Through-hole: 95 mm Replaceable jaws Height: 140 mm Nwsdpod Idnvsfx Akisn Weight: 36 kg

Condition: used, Three-jaw chuck, 3-jaw chuck Nodpfx Akod Irayjijwn -Chuck size: Ø 310 mm -Passage: Ø 110 mm -Bayonet: short cone flange cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Weight: 47.2kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 210 mm Nedpfed Irbhjx Akiown -Weight: 18.5 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm Nsdpod Irbkefx Akiewn -Passage: Ø 70 mm -Short cones: 8 -Weight: 28 kg

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 Nwsdpfx Aod It H Njkisn -Rezess: Ø 199 mm -Weight: 35.8 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Short cones: 6 -Recess: Ø 194 mm Nwjdpfod It Idsx Akijn -Weight: 29.5 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Nodpfsd Iuxhox Akiewn -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Weight: 21.5 kg

Condition: used, three-jaw chuck, three-jaw lathe chuck Nwsdpfxoux Scge Akijn -Manufacturer: Bergmans, three-jaw chuck type 4110 chuck size Ø 255 mm -Passage: Ø 65 mm -Bolt circle: Ø 140 mm / M12 -Dimensions: Ø 255 x 140 mm -Weight: 31 kg

Condition: used, three-jaw chuck, three-jaw lathe chuck Nwodpfx Ajux Scmokijn -Three-jaw chuck: chuck size Ø 190 mm -Passage: Ø 54 mm -Bolt circle: Ø 174 mm / M10 -Dimensions: Ø 190 x 110 mm -Weight: 11.2 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Nwodpfx Ajzx Uwxokien Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Nwjdpfx Aszr U Auokisn Technical Specification Counter Spindle Yes

Condition: new, Year of construction: 2023, functionality: fully functional, turning length: 235 mm, turning diameter: 225 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 142 mm, travel distance Z-axis: 325 mm, spindle motor power: 7 W, total length: 2,650 mm, total width: 1,500 mm, CNC FANUC Series 0i-TF PLUS Max. workable diameter from recovery 225 mm Max. workable length 235 mm Z-axis stroke 325 mm X-axis stroke 142 mm Main spindle speed Max. 6000 rpm (belt drive) Main spindle motor power (5.5/7.5KW) Spindle nose ASA A2-5 Self-centering chuck diameter 170 mm 12-station turret Axis slide type Linear guides 3-jaw soft jaws (6"): 1 set Automatic lubrication system Hydraulic system Hydraulic tailstock Cooling system High pressure coolant pump Leveling bearing Foot pedal for opening and closing the self-centering chuck MPG handwheel Work light lamp Tool box A set of instruction manual (service manual, wiring diagram and parts list) Nedpfovkv Igox Akijwn CE certification with EN-13849-1 Chip conveyor Chip tank trolley Transformer for 380V, 50HZ/3PM Leveling kit

Condition: good (used), Agilent HPLC system - including PC & software The list price includes the following 1100 series modules: - tray - degasser - pump - autosampler - column oven - VWD detector We can built almost any kind of HPLC setup according to your need. For the exact pricing please inquire. Available modules: Brand Series Model Type Quantity Agilent 1100 G1310A ISO pump 1 Agilent 1100 G1311A Quat pump 4 Agilent 1100 G1313A ALS 1 Agilent 1100 G1314A VWD 7 Agilent 1100 G1315A DAD 1 Agilent 1100 G1315B DAD 4 Agilent 1100 G1316A Column Oven 1 Agilent 1100 G1318A Column Oven 6 Nwjdpsvk U Ncsfx Akisn Agilent 1100 G1329A ALS 1 Agilent 1100 G1330A ALS Therm 1 Agilent 1100 G1330B ALS Therm 1 Agilent 1100 G1361A Prep pump 2 Agilent 1100 G1367A Well plate auto sampler 4 Agilent 1100 G1376A CAP pump 1 Agilent 1100 G1379A Degasser 4 Agilent 1100 G1379B Degasser 4 Agilent 1100 G2260A Prep ALS 1 Agilent 1200 G1315D DAD 1 Agilent 1200 G1330B FC/ ALS Therm 1 Agilent 1200 G1364C Analytical FC 1 Agilent 1200 G1367B Well plate ALS 1 Agilent 1260 G1314F VWD 1 Agilent 1290 G1330B Thermostat 2 Any questions please feel free to ask. Please check out our other listings as well.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws Njdou Npd Njpfx Akiswn -Manufacturer: Röhm, top jaws jaw set for three-jaw lathe chuck, hard -Jaw width: 18 mm -Dimensions: see photo technical drawing -Dimensions total: 61/54/H47 mm -Total weight: 0.7 kg

Condition: used, Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, pull-down clamp -Manufacturer: WILA, stable clamping jaw height adjustable -Clamping jaw: 120 x 45 mm Njdpfx Aju N Sh Dokijwn -Clamping height: 85 - 105 mm -Groove width: 28 mm -Dimensions: 240/120/H90 mm -Weight: 10.6 kg

Condition: excellent (used), functionality: fully functional, soft starter Aucom IMS2 IMS520585 V5 C24 F1 E0 motor starter 132-450 kw Digital display, fully automatic setting options. IMS2xxxx-V5 3 x 200 VAC ~ 525 VAC (in-line / 3-wire connection) 3 x 200 VAC ~ 440 VAC (internal delta / 6-wire connection) IMS2xxxx-xx-C24 230 VAC or 400 VAC (+ 10% / - 15%) Control inputs Start (terminals C23, C24) Active 24 VDC, 8 mA approx Nwsdowv Idijpfx Akion Mains frequency at start 50 Hz (+/- 2 Hz) or 60 Hz (+/- 2 Hz) during start > 45 Hz (50 Hz), or > 55 Hz (60 Hz supply) during run > 48 Hz (50 Hz), or > 58 Hz (60 Hz supply) Immunity IMS2xxxx-xx-xxx-xx-E0 IP00 (open chassis) echnikai leírás: Aucom IMS2 soft starters are a total motor starting solution, combining high-level functionality with flexibility and ease of use. Whether you need a simple solution to starting or stopping your motor, or a comprehensive protection system for your motor and installation, the Aucom IMS2 can be configured to suit. The Aucom IMS2 offers a choice of soft start and soft stop profiles to ensure optimum control for all load types. The unique torque control system gives more linear acceleration than standard constant current, and a special pump control function reduces water hammer. The Aucom IMS2 also incorporates advanced motor and load protection features, ensuring safer operation for your application. With extensive input/output and integration options, the Aucom IMS2 minimises installation time and costs and ensures that motors can be operated with confidence. In simple installations, set up is very quick as only one parameter needs to be set before the starter is ready to use. For advanced applications, an extensive range of functions allows you to use the Aucom IMS2 to suit nearly all motor starting and control requirements. Aucom IMS2 soft starters can be connected in in-line or inside delta configuration. Inside delta connection allows control of motors 50% larger than the standard rating, and also allows replacement of star/delta starters without changing existing motor wiring. Power connections on 302 ~ 1574 A models can be configured for any combination of top or bottom input and output, making the Aucom IMS2 ideal for integration into existing installations.