Used Servo Controller for sale (42,698)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Cell size 3, 45 x 3, 45 µm Nsdpfx Agsmza Iljwscp Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Transmission system: Digital serial transmission Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. Lens mount: C screw mount

Condition: excellent (used), Xerox / Fiery EX-P 6 controller for Xerox Iridesse. Tested and in good working condition 👌 Ncodpfxexyv Nxj Agwjp

Condition: good (used), Year of construction: 2021, Canon Varioprint 6180 Titan Including C53 controller. Total counter: 17 million. Ncedpfxewutchj Agwjp Immediately available.

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 140 mm, spindle bore: 45 mm, center width: 500 mm, Cycle lathe Ncedpfxjyvugdo Agwep Manufacturer: Kern Model: CD 282 Year of manufacture: 2006 Technical Data Make: Kern Model: CD 282 Year: 2006 Control: Heidenhain Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 140 mm Spindle bore: 45 mm Speed range: 1–5000 rpm Drive power: 11.5 kW Dimensions: L 2.20 x W 1.60 x H 1.20 m Weight: approx. 1.6 t Accessories - Heidenhain control digital display - Clean Mist extraction unit, model CM 1400/2, year 2018 - Large range of accessories as per photos - 1 piece steady rest - 1 faceplate, ø500 mm - 4 Multifix holders, size C All information is supplied without liability. A live demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The hot runner controller from Hasco is for sale, including a few technical details. An operating manual is available in both German and English. Number of zones: 6 Dimensions: 434 mm x 226 mm x 365 mm Ncjdpfeyxa Npox Agwep Operating temperature: 0–50°C Display per zone: 2x three-digit, 7-segment display Control panel: 12 keys Electrical connection with CEE plug: 3x32A

Condition: good (used), Year of construction: 2015, functionality: fully functional, Approx. 3.300 spindle running hours Technical details turning diameter 570 mm turning length 1500 mm control Siemens Sinumerik 840 D SL swing diameter over face slide 365 mm bed width 360 mm spindle bore 62 mm spindle turning speed range 6 - 2500 rpm transmission ratio 2 rapid travel - longitudinal/face 10 / 5 m/min max. workpiece weight -without tailstock 400 kg max. workpiece weight between centres 1000 kg max.workpiece weight:each extra steadyrest 300 kg Nodpfxjytdy Hs Agwecp tailstock quill diameter 100 mm tailstock quill stroke 190 mm power capacity (60/100 % ED) 25 / 20 kW max. torque on the spindle 1800 / 1400 Nm weight of the machine ca. 5,2 t dimensions of the machine ca. 4,33 x 2,15 x 2,00 m With documentation, chip conveyor, steady-rest, accessories (see picture)

Condition: good (used), PLC control, electronic module, PLC control Ncedpsxn Nm Hjfx Agwop -Manufacturer: Schneider, PLC control Modicon -Output module: Type: Modicon TM3DQ16T 1 pc. -Input module: Modicon TM3AI8 3 pcs. -Trigger module: Modicon TMAQ4 2 pcs. -Shipping/Price: complete -Dimensions total: 150/90/H90 mm -Weight: 0.7 kg

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel Ncodpexw Ii Sofx Agwep CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: excellent (used), ABB IRC5 Controller USED,20% discount at order more then 1 unit DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Ncodpfx Agjxq Tvdjwjp

Condition: excellent (used), A06B-6105-H002 6-AXES SERVO DEVELOPMENT OF GSG ROBOTICS Ncjdpfx Aoxq Tu Togwjp GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2013, ABB IRC5 Controller,20% discount at order more then 1 unit. Nedpfexq Tumjx Agwocp DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2014, ABB IRB7600-340/2.8+ IRC5 controller+TPU DEVELOPMENT OF GSG ROBOTICS Nedpfxjxq Tuas Agwscp GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10+IRC5 controller+TPU-Low DTC DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Nodpfx Aexq Tt Nogwecp

Condition: new, Year of construction: 2022, ABB IRC5 Controller NEW Nodpfoxq Ttvsx Agwjcp DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,600 h, ABB IRB4600-45/2.05 Robot and IRC5 controller-TPU-RW6.X DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Ncedpexq Tq Usfx Agwsp

Condition: excellent (used), ABB IRB4600-60/2.05 Robot and IRC5 VELOPMENT OF GSG ROBOTICS Ncedpfxsxq Tq Io Agwjp GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Year of construction: 1990, condition: used, Control panel Grundig for COVER FP 5 A DIALOG 11 incl. handwheel/switching element Year of manufacture 1990 Nedpfx Ask Rqcnogwocp

Year of construction: 2015, condition: excellent (used), We offer the following temperature control units for sale: HB-Therm 100Z1, year of manufacture: 2012 4 units HB-Therm 100Z1, year of manufacture: 2013 2 units HB-Therm 100Z1, year of manufacture: 2011 3 units HB-Therm 100Z1, year of manufacture: 2015 1 unit Ncodjyw H Iijpfx Agwop HB-Therm 100Z1, year of manufacture: 2017 3 units HB-Therm 100X1, year of manufacture: 2008 4 units HB-Therm 100X1, year of manufacture: 2017 1 unit The units are fully functional, will be cleaned before sale, and will receive the latest software update. Shipping on Euro pallets possible!

Condition: used, Year of construction: 2000, turning diameter 400 mm turning length 1000 mm control FAGOR control CNC 8055/B-T centre height 200 mm centre distance 1000 mm turning dia. over face-slide 210 mm bed width 300 mm spindle bore 65 mm spindle turning speed range 0 - 3000 U/min transmission ratio 2 Njdpfxsvh I T As Agwocp feeds - longitudinal 0 - 10.000 mm/min feeds - cross 0 - 10.000 mm/min rapid travel - longitudinal/face 15 m/min tailstock quill diameter 68 mm tailstock quill stroke 155 mm tailstock taper MT 4 total power requirement 8 kW dimensions 3,1 x 1,9 x 1,78 m Accessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolant

Condition: excellent (used), Year of construction: 2004, - Fagor digital display - Accessories available Working area Nodpeyvy Rnofx Agwscp Max. turning diameter over bed: 350 mm Max. turning diameter over cross slide: 200 mm Centre height: 180 mm Centre distance: 1000 mm Bed width at guideway level: 255 mm Top slide travel towards headstock: 60 mm Top slide travel away from headstock: 55 mm Spindle nose with flange according to ISO 702-3 (DIN 55027) C6 (DIN 6) Spindle taper: Morse taper 6 Spindle bore: 54 mm Tailstock quill taper: Morse taper 4 Tailstock quill travel: 100 mm Tailstock lateral adjustment: ± 10 mm Spindle speed range, stepless: 40 – 2500 rpm Feed levels: Longitudinal feed: 9 Cross feed: 9 Feed rates: Longitudinal feed: 0.04 - 0.4 mm/rev Cross feed: 0.02 - 0.2 mm/rev Metric threads: Number: 28 Pitch: 0.2 – 4.5 mm Inch threads: Number: 21 Pitch: 76-8 TPI Module threads: Number: 28 Pitch: 0.2-4.5 mm Diametral pitch threads: Number: 21 Pitch: 76-8 DP Leadscrew thread pitch: 6 mm Tool holder section: 20x20 mm Max. spindle torque: 200 Nm Main drive power: 4 kW (5.5 HP) Electric pump power: 0.12 kW (0.16 HP) Synchronous speed of main motor at 50 Hz: 1500 rpm / at 60 Hz: 1800 rpm Synchronous speed of coolant pump motor at 50 Hz: 3000 rpm / at 60 Hz: 3600 rpm Machine dimensions Length x width x height: 2300 x 940 x 1400 mm Weight: 1500 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 weight of the machine ca. 6,5 t dimensions of the machine ca. 7400 x 2100 mm Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Ncsdoyrqdiepfx Agwjp Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: excellent (used), DEMAG / ABUS / STAHL / KONECRANES / SCHNEIDER / TELEMECANIQUE – Pendant control stations / Pendant pushbutton stations / Empty enclosures: DEMAG Pendant Control Station / Pendant Pushbutton Station: 1. Type: DST 9 / DST 6/7 / DST 6 / DST 3 – 27 units (used). 2. Type: DRC10 2ST D3 – 2 units (new). 3. Type: DSE 10CS – 1 unit (new). 4. Type: DST 9 SP222 – 1 unit (new). 5. Type: DSE 8 P222BE – 1 unit (used). 6. Type: DCS – 1 unit (new). ABUS Pendant Control Station / Pendant Pushbutton Station: 1. Type: 70268 – 2 units (new). Njdpfx Agsyvuakjwecp 2. Control cable Type: SC15X1 L., 2000 mm – 2 units (new). STAHL Pendant Control Station / Pendant Pushbutton Station: 1. Type: STH 1202 - 021 – 1 unit (new). 2. Type: STH 1202 - 021 – 1 unit (used). KONECRANES – 1 unit (new). SCHNEIDER Pendant Control Station / Pendant Pushbutton Station: 1. Type: XACA 1436217 – 1 unit (new). TELEMECANIQUE Pendant Control Station / Empty Enclosures: 1. Type: XAC A08 – 2 units (new). 2. Type: XAC B02 – 2 units (new). 3. Type: XAC B06 – 1 unit (new). 4. Type: XAC B04 – 1 unit (new). ROTARY SWITCH – pushbutton – 1 unit (original packaging).

Condition: new, Year of construction: 2026, 560 mm Nsdpfx Agjyrtyaswecp 320 mm 400 mm 950x450 mm 1050x320 mm 25-3600 U/min SK 40

Condition: ready for operation (used), Year of construction: 1972, Immediately available from university: L & Z Lathe Boehringer VDF Model E 560 Turning length: 4000 mm Njdpfsyw I T Tjx Agwscp Year of manufacture: 1972 Very few operating hours Centre height: 305 mm Swing over bed: 610 mm Swing in gap: 810 mm Swing over cross slide: 375 mm Spindle bore: 82 mm Spindle speeds: 7 – 1400 rpm Drive: 12.5 kW Heidenhain digital readout Chuck Faceplate Multifix tool post with numerous inserts Steadies Weight: 7 t Price: EUR 10,500.— plus VAT, ex location

Condition: new, x-travel 1000 mm y-travel 360 mm z-travel 400 mm spindle taper ISO 40 ISO table: 1370 x 300 mm feed: 30-830 / 23-625 mm/min. turning speeds 45 - 1660 U/min distance spindle /table 60 - 460 mm rapid traverse Z Achse 750 mm/min throat 95 - 575 mm total power requirement 3.0 kW weight of the machine ca. 1505 kg range L-W-H 1740 x 1860 x 1900 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system "Huron", adjustable to all angular positions - Swiveling control panel with ergonomically placed switches Ncsdpexaak Tefx Agwjp - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included in delivery - Precisely surface-machined cross table with T-slots Scope of delivery - 3-axis digital display ES-12 H with LCD display - Drawbar spindle M16 - LED machine light - Feed for x, y and z axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combined milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable protective device - Central lubrication for x, y and z axes - Operating tool