Used Roller Rail Curve for sale (17,652)

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Lrjdpjzka H Aofx Aigsr

Year of construction: 2016, condition: ready for operation (used), A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible. Lrjdpfx Aextfgyeigor

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Ljdpfx Aswqqv Djigerr

Year of construction: 2015, condition: ready for operation (used), A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible. Lrsdpfx Aijynltdogor

Condition: ready for operation (used), Year of construction: 2013, Offered is a precision sheet metal straightening machine. Material width: 1500mm, material thickness: 1-2mm, suitable for: aluminum, control: Siemens Simatic OP177B. Equipped with roller conveyor discharge frame. Additionally available spare parts: Siemens Control Unit 24V DC (6SL3040-1NB00-0AA0), Siemens compact asynchronous motor 15kW (1PH7133-2DF02-0BA0), Siemens synchronous servo motor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA cam rollers. Weight: approx. 6700kg, overall dimensions X/Y/Z: approx. 2400mm/1600mm/1800mm. Inspection possible by arrangement. Lodpfx Aoy Uyfveigerr

Year of construction: 2020, condition: ready for operation (used), A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible. Ledjt R Tq Iepfx Aigsrr

Condition: used, Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible. Lredpfx Aiszulg Njgor

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Lrodpozukt Ijfx Aigor

Year of construction: 2018, condition: used, machine/vehicle number: P18.0003, Rated power: 14.5 kW, speed range: 20-18,000 rpm, tool holder HKS-A63, 30-position tool changer, oscillating machining, controlled NC swivel milling head, machine weight: 2,200 kg, 1 steel drawer cabinet (gray), dimensions (W x H x D): approx. 80 x 120 x 80 cm, 8 drawers, filled with various accessories, 1 workbench, 1 with a sub-mounted steel drawer cabinet on the left, approx. 200 x 70 cm, 6 drawers, with contents. Ljdpfxozqzade Aigjrr

Condition: used, functionality: fully functional, Type: Lightweight roller conveyor Ljdpeqcvlljfx Aigerr Item no.: 1000003825 Overall dimensions: 805 x 550 x 65 mm (LxWxH) Cheek width: 25 mm Cheek height: 65 mm Conveyor length: 800 mm Conveyor width: 490 mm Roller type: Plastic Rollers per axle: 1 piece Roller pitch: 65 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 490 mm, total width: 550 mm, total height: 70 mm, TAF article number: 1000003929 Manufacturer: unknown Year of manufacture: unknown Ljdpfeu D Hryex Aigorr Overall dimensions: approx. 985 mm x 550 x 70 mm (LxWxH) Cheek width: 20 mm Cheek height: 60 mm Conveyor length: 985 mm Conveyor width: 490 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 60 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: used, functionality: fully functional, roll diameter: 60 mm, roll width: 855 mm, total width: 955 mm, total height: 90 mm, total length: 1,375 mm, conveying length: 1,375 mm, TAF article number: 1000004054 Overall dimensions: approx. 1,375 x 955 x 90 mm (LxWxH) Width incl. side panel: 690 mm Side panel height: 80 mm Ljdpfxjt H Igpo Aigjrr Width incl. drive: 955 mm Conveyor length: approx. 1,375 mm Conveyor width: 855 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 155 mm Roller diameter: 60 mm Drive type: gravity Conveying speed: constant Condition: Used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, total width: 580 mm, total height: 280 mm, total length: 5,000 mm, conveying length: 5,000 mm, construction width: 580 mm, power: 0.19 kW (0.26 HP), axle spacing: 60 mm, TAF article number: 1000003831 Overall dimensions: approx. 5,000 x 580 x 280 mm (LxWxH) Width incl. side: 580 mm Side panel height: 100 mm Width incl. drive: 580 mm Conveyor length: 5,000 mm Conveyor width: 500 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 60 mm Roller diameter: 50 mm Drive type: Flat belt Motor: Gear motor Lrodpfxstizbtj Aiger Motor data: SEW, 0.25 kw, 50 Hz, 220-240 Volt Conveying speed: max. 0.19 m/s, constant Special features: CEE plug Condition: Used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, total width: 670 mm, total height: 80 mm, total length: 3,000 mm, conveying length: 2,950 mm, construction width: 665 mm, roll spacing: 75 mm, TAF article number: 1000003932 Manufacturer: unknown Year of construction: unknown Overall dimensions: approx. 3,000 x 665 x 75 mm (LxWxH) Cheek width: 665 mm Cheek height: 65 mm Conveyor length: 2,950 mm Conveyor width: 605 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 75 mm Roller diameter: 50 mm Lodpfx Aotznwdjigerr Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, total height: 70 mm, total length: 3,000 mm, TAF article number: 1000004163 Manufacturer: unknown Ljdpoucwr Sefx Aigorr Year of manufacture: unknown Overall dimensions: approx. 3,000 x 540 x 70 mm (LxWxH) Cheek width: 540 mm Cheek height: 60 mm Conveyor length: 3,000 mm Conveyor width: 500 mm Roller type: Plastic Rollers per axle: 1 piece Roller pitch: 62.5 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: used, Year of construction: 2018, operating hours: 3,240 h, 2018 | Hamm DV+ 70i VV-S | Used Tandem Roller | 3240 hours Lsdpfxozmawao Aigjrr 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 55900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 44 inspection points 44 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good operating roller , all operations work during inspection ,no further issues , machine is ready to work , hour meter not verrifyd 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40946 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Lrsdpottc Uaofx Aigor

Condition: excellent (used), functionality: fully functional, Low-profile roller conveyor system. Lrsdpfx Aozumy Reigor Length 12.20 m. Roller length 1.40 m. Equipped with support rollers and a lifting transfer conveyor with 4 chain strands. Incline conveyor belt for side products, to increase the drop height. Left-hand spiral roller conveyor with a counter roller.

Condition: good (used), functionality: fully functional, power: 62 kW (84.30 HP), fuel type: diesel, empty load weight: 7,100 kg, Year of construction: 2005, operating hours: 2,818 h, Equipment: air conditioning, ROLLER ATLAS AW1070 Year of manufacture: 2005 According to the meter: 2,818 hours 7,100 kg 62 kW Perkins engine - 170 cm roller width - Full cabin with heating and air conditioning - Original paint - Immediately ready for use Selling price: €23,500 net Lrsdpfxszvwt Do Aigsr Affordable delivery also possible!

Condition: used, 3700mm long, 960mm high, and adjustable Ledpfx Ajv Dauqeigjrr Storage location: Nattheim

Condition: new, Feed roller for Hofmann thickness planer 210 mm wide Ledpek I Si Hsfx Aigerr Diameter 75 mm Internal hexagonal bore 9 pieces available

Condition: excellent (used), Roller support 300 mm Roller support 300 mm Lrsdjtwy Etjpfx Aigsr

Condition: used, Year of construction: 2015, 1 unit of overhead traveling crane / single-girder suspended crane ABUS, 1000 kg capacity with electric chain hoist ABUS GM 4 1000.4-2, 6 supports, self-disassembly feature Color: as shown in the pictures, in accordance with the images and inspection Year of manufacture: 2015 Lrjdpfx Aiezqbvxsgjr Dimensions L/W/H: 1700x400x260cm Condition: used

Condition: used, functionality: fully functional, Full Newman M3 Roller Frame Setup - Selling due to business closure 23 X 31 inch frames (60+ frames) - some are meshed, some are just the frames Newman Stretching Table (requires air - small compressor or link up to current air supply) Selection of mesh panels (approx 10) - or can be used with rolls of mesh of your choice 40n tension can be achieved £1,200 + VAT (ONO) Ledpezb Rgpofx Aigorr Sold as seen, all in good working order Mid-Wales - UK Buyer responsible for collection or pallet delivery (2) can be arranged at buyers expense

Condition: new, Year of construction: 2026, Adhesive application machine / Adhesive roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) Working width: 1,300 mm Maximum passage height: 100 mm Speed: 18 m/min Working height: 900 mm Diameter of application rollers: 185 mm Power rating: 0.5 Hp 0.37 KW Operating side: right Electrical system: 400 V/50 Hz/3 phases Technical features: - Structure of the adhesive application machine made of welded sheet metal. - 1 motor for driving the two rollers - Adhesive application rollers coated with acid-resistant special rubber, ground to shape and grooved, wear-resistant. - The thickness of the rubber layer can be ground to shape multiple times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to a maximum of 5 mm on the workpieces. - Adhesive dosing via a distribution trough made of zinc sheet. Easily removable for cleaning. - 1 handwheel for adjusting the roller gap - Safety guard for the rollers to prevent accidents Lrsded Iz Dfjpfx Aiger - Electrical components according to the highest quality standard - CE standard