Used Pulse Oximeter for sale (768)

Condition: ready for operation (used), Indramat TRK6-4U-380 / 60-G0 / 527 - TRK6-4U-380/60-G0/527 6 pulse thyristor control amplifier, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Guedpfxor R Uqpj Aacsh

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system. Gusdpexnlflofx Aacsh

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FOR SALE: JayCraft Cook Quench Chill System – High-Efficiency Food Processing Line Manufactured by JayCraft, this high-performance Cook Quench Chill (CQC) system is designed for fast, efficient, and consistent cooking, rinsing, and chilling of a wide range of food products. Built to the highest industry standards, this system is ideal for processors of pasta, rice, vegetables, pulses, and more. Product Overview: Manufacturer: JayCraft Food Machinery (UK) Function: Cook → Quench → Chill – continuous food processing system Application: Designed for precision cooking, starch removal, and rapid cooling Build: Heavy-duty stainless steel construction for hygiene and durability Condition: Excellent – factory-tested and ready for operation Key Features: Energy-efficient cooking and chilling Controlled temperature zones for optimal product consistency Integrated water management and filtration High-throughput design for increased production efficiency Easy access for cleaning and maintenance Compact footprint – suitable for a wide range of production facilities Ideal for Processing: Pasta (fresh, dried, or filled) Gusdpfx Asxc Ekkeacoh Rice and grains Vegetables (peas, carrots, green beans, etc.) Pulses and legumes Noodles and more JayCraft Cook Quench Chill (CQC)

Condition: good (used), Fanuc Level Shifter PREMOSYS VE-P-0001 Level Converter VEP0001 | VE-P Shifter Gsdpfx Ajxl S Ubeacouh PREMOSYS VE-P-0001 Level Converter This module is used to convert encoder signals fed in by a commercially available encoder. These signals can reach levels from 5 to 24V DC. A potential-free conversion to an output level of 5V DC with RS-422 characteristics takes place. In addition, the pulse frequency of the output signals can be output in divider ratios of 1/2/4/8/16/32/64 and 128, whereby the counting direction can be negated. For this purpose, simply flip a DIP switch. The division ratios refer only to the encoder counting signals (K1 and K2); the encoder zero signal is output undivided. Technical specifications: 5 to 24 V encoder signal input 5 V RS 422 output signals Input frequency up to 1 MHz Division ratios 1 to 128 Optical status indicator DIN rail mounting Lockable connectors Manufacturer price: €5,680 You can find more Fanuc robots and components in our shop! Some products are also available in larger quantities.

Condition: used, functionality: fully functional, machine/vehicle number: 911xxxxx, Year of construction: 2017, operating hours: 5,192 h, load capacity: 1,600 kg, lifting height: 9,020 mm, free lift: 2,896 mm, fuel type: electric, mast type: triplex, construction height: 3,540 mm, fork length: 1,150 mm, empty load weight: 3,900 kg, total length: 1,830 mm, drive type: Elektro, construction width: 1,270 mm, Reach Truck Chassis Number: 911xxxxx Load Center: 600 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: AC Impulse Condition: Refurbished without warranty Technical Condition: Very good Gsdpfow Dkl Sex Aaceuh Front Tires Type: Polyurethane Front Tires Size: Load rollers, polyurethane Rear Tires Type: Polyurethane Rear Tires Size: Drive wheel, polyurethane Battery Voltage: 48V Battery Capacity: 775Ah Battery Manufacturer: Jungheinrich Battery Type: PzS Battery Year: 2019 Description: Serviced, technically and visually refurbished, all wheels will be replaced before delivery, sold without warranty/legal liability for material defects Sideshift, integrated 3rd valve, roof cover, impulse control, full free lift, CE certificate, efficiency package, panoramic mirror, PIN code on display, separate code lock not activated, floor spot LED, Solo-Pilot control, battery (03/2019) with aquamatic system, suitable external charger included

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 1,710 h, load capacity: 1,500 kg, lifting height: 4,300 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 1,975 mm, fork length: 1,200 mm, empty load weight: 3,200 kg, total length: 1,850 mm, drive type: Elektro, construction width: 1,000 mm, 3-wheel electric forklift Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tyres type: Superelastic Rear tyres type: Superelastic Battery voltage: 24V Battery capacity: 600Ah Battery year: 2015 Sideshift, Gusdsxir Ebepfx Aacsh 3rd valve, rear work light, front work light, overhead guard, front windscreen, load guard, pulse control, full free lift, CE certificate,

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing Gujdjf E Idlopfx Aacsh - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact shrinker KC 8060/650 Universal Year of construction: 2014 Dimensions: approx. 3550 x 1350 x 1450 mm (LxWxH) Weight: approx. net 690 kg / gross 790 kg Technical data: Guodpfx Ajxl Dqzoaceh Sealing frame dimensions: 800 x 600 mm Film roll width: max. 750 mm Working height: 870 - 970 mm Passage height: 100 - 400 mm Power connection: 380 V three-phase current Easy-to-operate angle welding machine, combined with shrink tunnel. Particularly robust design for industrial use. Welding frame dimensions 800 x 600 mm. Proven impulse welding technology with Teflonized cut-off welding wire for absolutely odorless operation. Equipped with locking mechanism as automatic pressure mechanism for precise adherence to the set welding time and for easy for problem-free cut-off welding even of thick films. Viewings and demonstrations are possible on our premises by prior arrangement. Function guarantee, no warranty

Condition: new, functionality: fully functional, Year of construction: 2023, load capacity: 1,200 kg, lifting height: 3,600 mm, mast type: telescopic, construction height: 2,458 mm, fork length: 1,150 mm, empty load weight: 639 kg, total length: 1,698 mm, drive type: Lithium-Ionen, construction width: 800 mm, Pedestrian stacker Load center of gravity: 600 Fork width: 170 mm Gsdpfxou D S Sfj Aacouh Fork thickness: 60 mm Mast type: Telescopic Gearbox: Electromechanical Condition: New machine Technical condition: New Front tires type: Vulkollan Rear tires type: Vulkollan Battery Volt: 24V Battery Ah: 60Ah Battery manufacturer: Manitou Battery type: Lithium-Ion Battery year of manufacture: 2023 Description: In addition to this device, we offer other forklifts and warehouse equipment. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles. Pulse control, CE certificate, lithium-ion technology,

Condition: good (used), FOBA FD84S Sensor for YAG Laser Marking System For sale is a used FD84S sensor from FOBA. The sensor is designed for use in YAG laser marking systems. Technical Details: Manufacturer: FOBA Model: FD84S / S50 Gsdpfjxlq Exex Aacouh Design: Sensor / Laser Control Component Laser Class (System Use): 4 Wavelength: 1064 nm Laser Power (System Use): 70 W Pulse Power: 10 kW Pulse Duration: 70 ns Application: Spare Part / Component for FOBA Laser Marking Systems Condition: Used, Working Buy FOBA FD84S sensors and other items at great prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: used, functionality: fully functional, machine/vehicle number: HHKHHTxxxxxxxxx, Year of construction: 2013, operating hours: 1,905 h, load capacity: 1,500 kg, lifting height: 4,335 mm, free lift: 1,464 mm, fuel type: electric, mast type: triplex, construction height: 2,020 mm, fork length: 1,200 mm, empty load weight: 3,032 kg, total length: 1,810 mm, drive type: Elektro, construction width: 990 mm, Electric 3-wheel forklift Gedpfx Aajxlvmhoceuh Chassis number: HHKHHTxxxxx Load center: 500 mm ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: Triplex Drive: AC impulse Condition: Operational and fully functional Technical condition: Good Front tires type: Superelastic Front tires size: SE 18x7-8 Rear tires type: Superelastic Rear tires size: SE 18x7-8 Battery voltage: 24V Battery capacity: 1000Ah Battery manufacturer: Hawker Battery type: PzS Battery year: 2013 Description: Technically and visually in good condition, taken back from customer, sold without warranty/liability for material defects Sideshift, 3rd valve, rear work lights, front work lights, electronic impulse control, full free lift, Rear lights and indicators, single-lever control, panoramic mirror, hour meter, discharge monitor, battery (08/2013) with Aquamatik (suitable for light-duty use), external charger, as returned by customer, technically sound, genuine operating hours.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 690 h, load capacity: 1,500 kg, lifting height: 4,300 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 1,975 mm, fork length: 1,200 mm, empty load weight: 3,200 kg, total length: 1,850 mm, drive type: Elektro, construction width: 1,000 mm, Electric 3-wheel forklift Load centre: 500 mm ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: Triplex Technical condition: good Front tyre type: super elastic Front tyre condition: 80 – 100% Rear tyre type: super elastic Gujdpfx Aaoxir Dqecoh Rear tyre condition: 40 – 60% Battery voltage: 24V Battery capacity: 600Ah Battery year: 2015 Sideshift, 3rd valve, rear work light, front work light, overhead guard, windscreen, load backrest, pulse control, full free lift, CE certificate,

Condition: new, Year of construction: 2025, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) Gsdpfx Aasf E Idzoceuh - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Year of construction: 2014, condition: excellent (used), From operation resolution: MIgatronic PI 250 DC Year of manufacture 2014 Pulse function HF ignition Water cooling without function Welding range: 5-250Ampere 250Ampere at 30% ED 180A at 60% ED 150A at 100% ED 220 Volt with 8meter torch(sheath partly damaged), ground cable and pressure reducer dimensions in mm approx. 1100x630x720 Gjdjm Tit Njpfx Aacjuh --Very well maintained unit-

Condition: new, functionality: fully functional, Year of construction: 2023, load capacity: 1,200 kg, lifting height: 3,600 mm, mast type: telescopic, construction height: 2,458 mm, fork length: 1,150 mm, empty load weight: 639 kg, total length: 1,698 mm, drive type: Lithium-Ionen, construction width: 800 mm, Pedestrian stacker Gsdpju D S Slefx Aacouh Load center of gravity: 600 Fork width: 170 mm Fork thickness: 60 mm Mast type: Telescopic Gearbox: Electromechanical Condition: New machine Technical condition: New Front tires type: Vulkollan Rear tires type: Vulkollan Battery Volt: 24V Battery Ah: 60Ah Battery manufacturer: Manitou Battery type: Lithium-Ion Battery year of manufacture: 2023 Description: In addition to this device, we offer other forklifts and warehouse equipment. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles. Pulse control, CE certificate, lithium-ion technology,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,860 h, load capacity: 1,400 kg, lifting height: 5,400 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork length: 1,150 mm, empty load weight: 2,830 kg, total length: 1,800 mm, drive type: Elektro, construction width: 1,300 mm, Reach truck Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Cushion Front tire condition: 60 - 80% Rear tire type: Cushion Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 465Ah Battery year: 2020 Gjdpfx Asxg U Eloacouh Sideshift, 3rd valve, 4th valve, Pulse control, Full free lift, CE certificate,

Condition: new, Year of construction: 2025, shaft length: 1,064 mm, laser power: 20 W, door opening width: 480 mm, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y Gusdpfxjf E Ifbj Aacoh =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 1,600 kg, lifting height: 5,300 mm, free lift: 1,756 mm, fuel type: electric, mast type: triplex, construction height: 2,343 mm, fork length: 1,150 mm, empty load weight: 1,340 kg, total length: 1,964 mm, drive type: Elektro, construction width: 820 mm, Pedestrian Forklift Load Center: 600 Fork Width: 180 mm Fork Thickness: 60 mm Mast Type: Triplex Transmission: Electromechanical Condition: New Technical Condition: New Front Tires Type: Vulkollan Gsdpfxov Trkcs Aaceuh Rear Tires Type: Vulkollan Battery Voltage: 24V Battery Ah: 300Ah Battery Manufacturer: Atec Battery Type: PzS Battery Year of Manufacture: 2025 Description: In addition to this forklift, we also offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 tested. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used vehicle, even if you don't purchase a vehicle from us. Hire purchase and financing at favorable terms are available upon request. We would be happy to provide you with expert and detailed advice on our vehicles. Impulse control, full free lift, non-marking tires,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,250 h, load capacity: 1,400 kg, lifting height: 6,300 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,654 mm, fork length: 1,150 mm, empty load weight: 3,700 kg, total length: 1,800 mm, drive type: Elektro, construction width: 1,300 mm, Reach truck Load center: 600 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: Good Front tyres type: Cushion Front tyres condition: 60 - 80% Rear tyres type: Cushion Rear tyres condition: 60 - 80% Battery voltage: 48V Battery capacity: 620Ah Battery year: 2018 Guedpexg U Efsfx Aacsh Sideshifter, 3rd valve, 4th valve, pulse control, full free lift, CE certificate, scale,

Condition: new, Year of construction: 2025, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction Gjdpfjfz D Hijx Aacouh =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 1,200 kg, lifting height: 3,600 mm, fuel type: electric, mast type: telescopic, construction height: 2,280 mm, fork length: 1,150 mm, empty load weight: 650 kg, total length: 1,710 mm, drive type: Elektro, construction width: 800 mm, Pedestrian stacker Load centre of gravity: 600 Fork width: 180 mm Fork thickness: 60 mm Mast type: Telescopic Gearbox: Electromechanical Condition: New device Gjdpsvzuyisfx Aacouh Technical condition: New Front tyres type: Vulkollan Rear tyres type: Vulkollan Battery voltage: 24V Battery Ah: 65Ah Battery manufacturer: Noblelift Battery year of manufacture: 2025 Description: 4-wheel concept for stability • Robust metal hood, centrally positioned drawbar • Multi-function display with discharge and error code display and operating hour counter • The built-in charger offers greater flexibility • The built-in lift shutdown when the battery is discharged extends the life of the battery • 24V/ 65Ah lithium battery block • Pin code lock • Ergonomic and robust drawbar Pulse control, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 2,080 h, load capacity: 1,500 kg, lifting height: 4,300 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 1,975 mm, fork length: 1,200 mm, empty load weight: 3,200 kg, total length: 1,850 mm, drive type: Elektro, construction width: 1,000 mm, Electric 3-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Gsdpfswrkfbsx Aacjuh Rear tire type: Superelastic Rear tire condition: 0 - 20% Battery volts: 24V Battery Ah: 600Ah Battery year of manufacture: 2014 Side shifter, 3rd valve, rear working light, front working light, roof cover, windshield, load guard, impulse control, full free lift, CE certificate,

Condition: new, Year of construction: 2025, Model 2025 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts Guodpfog H Tn Iox Aacjh incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 1,200 kg, lifting height: 3,600 mm, fuel type: electric, mast type: telescopic, construction height: 2,280 mm, fork length: 1,150 mm, empty load weight: 650 kg, total length: 1,710 mm, drive type: Elektro, construction width: 800 mm, Pedestrian stacker Load centre of gravity: 600 Fork width: 180 mm Fork thickness: 60 mm Mast type: Telescopic Gearbox: Electromechanical Condition: New device Technical condition: New Guodpfjvzuycex Aacoh Front tyres type: Vulkollan Rear tyres type: Vulkollan Battery voltage: 24V Battery Ah: 65Ah Battery manufacturer: Noblelift Battery year of manufacture: 2025 Description: 4-wheel concept for stability • Robust metal hood, centrally positioned drawbar • Multi-function display with discharge and error code display and operating hour counter • The built-in charger offers greater flexibility • The built-in lift shutdown when the battery is discharged extends the life of the battery • 24V/ 65Ah lithium battery block • Pin code lock • Ergonomic and robust drawbar Pulse control, CE certificate,

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 1,600 kg, lifting height: 5,300 mm, free lift: 1,756 mm, fuel type: electric, mast type: triplex, construction height: 2,343 mm, fork length: 1,150 mm, empty load weight: 1,340 kg, total length: 1,964 mm, drive type: Elektro, construction width: 820 mm, Pedestrian Forklift Load Center: 600 Fork Width: 180 mm Fork Thickness: 60 mm Mast Type: Triplex Transmission: Electromechanical Condition: New Technical Condition: New Front Tires Type: Vulkollan Rear Tires Type: Vulkollan Battery Voltage: 24V Battery Ah: 300Ah Battery Manufacturer: Atec Battery Type: PzS Battery Year of Manufacture: 2025 Description: In addition to this forklift, we also offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 tested. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used vehicle, even if you don't purchase a vehicle from us. Hire purchase and financing at favorable terms are available upon request. We would be happy to provide you with expert and detailed advice on our vehicles. Godpfx Aaov Tri Sscjuh Impulse control, full free lift, non-marking tires,