Used Power Circuit Breaker for sale (42,195)

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 80 t, stroke length: 60 mm, Power: 80 Ton Pgodpjzbvvvsfx Akieu Table size: 680 x 540 mm Strokes per minute: 60/min. Stroke: 60 mm Throat depth: 275 mm Gap in bed: 150 mm Controll: 2- hand controller Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 175 x 100 x 235 cm Machine weight: 3700 kg

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Psdezqgllopfx Akisgu Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: used, functionality: unexamined, Ferwood Code: RU0007370 - Manufacturer Code: S18-00-07 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Pedpfxsv Ef Tzj Akijgu

Condition: good (used), power converter, power supply, power pack, switching power supply -Manufacturer:Siemens, SITOP Power 20 -Type: 6EP1436-1SL11 -Input: 3AC 230/400 V 50/60 Hz -Output: 24 V DC / 20 A Pgsdew S Efuepfx Akiju -Quantity: 1 piece available -Dimensions: 240/120/H130 mm -Weight: 3.3 kg

Condition: good (used), Interface, data acquisition device, test device, telemetry system, probe interface, printed circuit board electronic module -Manufacturer: Stiefelmayer, circuit board from coordinate measuring machine Stiefelmayer C 100 413514 Pgsdsw S E Euopfx Akieu -Type: 413100-89 -Dimensions: 115/80/H55 mm -Weight: 0.2 kg

Condition: used, Hydraulic Power Unit ORSTA Year of manufacture: 1987 With 3 motors and various hydraulic circuits Tank capacity: 160 litres Pump power: 5.5 kW - 2 units of pressure accumulator, 160 bar, 25 litres each - 1 electric pressure switch - 7 units of 4/2-way hydraulic valve with solenoid coil - 5 units of 4/2-way hydraulic valve with solenoid coils - Oil cooling with water cooler and electric pump for internal water circuit Pgodexcitpjpfx Akieu Dimensions (L x W x H): 1300 x 750 x 1700 mm Weight: approx. 400 kg Offered without oil content

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Psdpfx Akexabt Aeisgu Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, B&R 0PS3200.1 Power Supply / Power Unit SN: AF651013330 - 3-phase / 24VDC / 20A, unused in opened original packaging (protective film still sealed), 100% operational, scope of delivery as per photos. Pgedpfx Asx Ht A Eskisu

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Mean Well, DIN rail switching power supply -Type: SDR-240-48 -Input: 100-240 VAC 2.6 A 50/60 Hz Pedpfxexxh Ece Akiogu -Output: 48 V / 5 A -Number: 11x power supply units available -Price: per piece -Dimensions: 125/65/H125 mm -Weight: 1 kg/piece

Condition: used, Hydraulic Power Unit with Hydraulic Pump FRIEDRICH - REXROTH - HYDRONORMA Hydraulic unit type HY01 - PV2V3-30 / 12R1MC 63 A1 Year of manufacture: 1979 Pump operating pressure: 80 bar Pump flow rate: 14 liters/min (unloaded) Motor power: 1.5 kW Tank capacity: approx. 30 liters Power supply: 400 volts, 50 Hz - Silent power unit, space-saving design - Hydraulic pump BOSCH REXROTH type PV2V3-30 / 12R1MC 63 A1 - Solenoid valve BOSCH REXROTH 081WV06P1N112 - Return line hydraulic filter - Pressure gauge - Hydraulic tank with top lid for easy access Pgjdpfx Akjxf Uzksieu - Electric switch for 2-way changeover Space required (L x W x H): 415 x 410 x 850 mm Net weight: 85 kg Good condition

Condition: good (used), power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, DC Power Supply -Type: PSL C242 -Power: 38 VA -Dimensions: 80/55/H110 mm -Weight: 0.8 kg Pjdpsvn I Srjfx Akiogu

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Pjdpfxeu Eki Ss Akisgu Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Condition: used, Used Crusher for Filter Cake / Lump Breaker Pedpfxsbpia Ds Akisgu Drive: Lenze The crusher for filter cake or lump breaker consists of two horizontal rotating shafts.

Condition: like new (used), Power module, 1-axis, 8 A, Internal heat dissipation Rated motor currents: 1FT5 = 4 A, 1FT6 = 3 A Asynchronous = 3A Was stored as a spare part Pedpfx Ajrk Eaxjkijgu

Condition: new, SIMODRIVE 611 Power module, 1-axis, 80A Pgsdpfx Aornkkxekiou internal heat dissipation Rated motor currents: Feed=28A main spindle=30A Package unopened

Condition: new, SIMODRIVE 611 Power module, 1-axis, 50A internal heat dissipation Rated motor currents: Feed=18A main spindle=24A Pgedornklgjpfx Akisu Package unopened

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine, only 4,300 cutting hours. This Prima Industrie Platino 1530 4.0kW CO2 laser cutting machine was manufactured in Italy in 2011 and installed at the end of 2011. Equipped with a PRIMACH 20 L control unit. Psdpfx Asivg Hgekiogu

Condition: good (used), NNP Kibbler lump breaker Pgjdpfx Aksqw Uxdoiou Stainless kibbler, 7.5Kw motor, 3Ph

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them Pgodpfx Aofydzbjkiju steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Year of construction: 2008, condition: excellent (used), Traypacker Power Food Capacity: 14,400 cups/hour, 125g/cup, used – in very good condition Pgedpfxod Rwwbe Akisu Technical data: Production capacity: 40 cartons/minute 6 cups/tray = 240 cups/minute = 14,400 cups at 125 g/cup Year of manufacture: 2008 Dimensions: Blanks – L x W x H: 698.5 x 168.0 x 1.5 mm Lids – L x W x H: 95.5 x 95.5 x 9.0 mm Cups – Diameter x H: 92.5 x 42.0 mm Machine dimensions: L x W x H: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg New price: €950,000

Condition: used, Year of construction: 2021, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Pgjdpfx Akez Nia Ujieu - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 177 kg, fuel type: gasoline, color: yellow, power: 12 kW (16.32 HP), output current: 16 A, continuous power (apparent): 9 kVA, motor manufacturer: Honda, Wacker Neuson GS 12 AI Generator NEW Wacker Neuson GS 12 AI Generator – NEW | Continuous output: 5.0 to 9.4 kVA | 12 kW Honda petrol engine | Electric start | 230 / 400 V voltage | incl. trolley frame | Operating weight: 177 kg Item number: 5000620317 Technical Specifications: Manufacturer: Wacker Neuson Model: GS 12 AI Condition: NEW Operating Weight: 177 kg Continuous Output: 5.0 to 9.4 kVA Engine: Honda GX 630 petrol engine Engine Power: 12 kW Starting System: Electric Voltage: 230 V / 400 V Connections: 2 x Schuko 230 V / 16 A, 1 x CEE 230 V / 16 A, 1 x CEE 400 V / 16 A, 1~ CEE 7/3 Special feature: Incl. trolley frame Pedpsz Hvivjfx Akijgu Highlights & Features: - Powerful generator – ideal for construction sites & industry - Robust Honda engine – reliable & easy to maintain - Electric start – convenient & fast - Integrated chassis – mobile & versatile - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Construction site supply & trades ✓ Events & temporary power supply ✓ Agriculture & municipal operations ✓ Workshop & emergency power supply ✓ Commercial use Location: Warehouse D-46514 Schermbeck (NRW) – Inspection and collection possible Delivery: Germany-wide & international upon request Pricing: ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded Other models and sizes available! Also in stock: GV 7003 A etc. ➡️ New & used machines, accessories & spare parts Buy a Wacker Neuson Generator | GS 12 AI NEW | 12 kW petrol generator | Construction site generator with 400/230 V | Honda GX 630 engine | Wacker Neuson quality Your reliable partner for generators & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! A virtual inspection of the machine via video call is available on request.

Year of construction: 2021, condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Westtech Woodcracker CS610 compact grapple saw / incl. Power-Tiltator / Year of manufacture: 2021 / in stock & immediately available / good condition Price: €31,990.00 net / €38,068.10 gross - Cutting diameter: 610 mm - Grapple opening width: 1,280 mm - Weight (basic - fully equipped): 830 - 1,060 kg - Recommended flow rate: 65 - 110 l/min - Recommended flow rate for auxiliary function: 40 - 60 l/min - Recommended operating pressure: 230 - 280 bar - Service weight of carrier vehicle: 15 - 20 t - Saw head: actively sprung - Chain lubrication: grease Equipment: - incl. Power-Tiltator We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. Podpfsz Nuxisx Akiogu We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and prior sale excepted! Internal No.: 421020 = Further information = New: No Part suitable for: Application forestry Please contact Marius Herden for further information.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, DIVISIO 3100 - Inline - Returned from leasing due to factory closure! New price in 2024: €149,000.00 net! 42,680 circuit boards have been milled. - Milling cutter diameter control - DIVISIO wear parts package - Automatic transport width adjustment - SMEMA transport height - Separation module for shank milling cutter, 500W - Camera hardware module - Camera teach function software module - Fiducial mark recognition software module - 8-position tool changer extension - Manual extraction hose - Suction power monitoring - ASYCAM CAD data conversion - A Adrep - Offset main switch - ESD energy chains and P-hoses, standard Pgjdpfx Akezpytaeiou - Packaging size, Group 3 pallet The dismantling order will only be placed after payment has been received. After that, the machine will have the packaging dimensions as specified by the manufacturer, approximately: No guarantee or warranty approx. 1850 kg and 125x200x190 cm, pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. • The sale is made with the exclusion of any guarantee or warranty. • The specifications are technical data from the original offer. • No liability is accepted for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: good (used), Power cable, flat cable, crane cable, rubber hose cable -Power cable: Flat cable, crane cable, 4-core -Type: 4G 2.5 -Length: 30 m -Transport dimensions: roll Ø 565 x 25 mm Pjdpfxozmtw Ts Akiegu -Weight: 8.4 kg