Used Plate Developer for sale (13,529)

Condition: good (used), Cast iron marble plate Iedoz H Iymjpfx Afujih Length: 3500 mm Width: 2500 mm Thickness: 300 mm Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T Iedez H Iyyspfx Afuoih 3 same plates available.

Condition: used, Pair of cast iron angle plates Height: 3000 mm Ijdpfx Afez H I Abjujih Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Condition: used, Pair of cast iron angle plates Isdpfxjz H I Ans Afusih Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Condition: used, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 450 mm, side roll diameter: 410 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, overall weight: 23,000 kg, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical data Rolls hardening induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls with axial gearbox and direct drive hydro-motor each roll Iiedpfoz H N Ifox Afuoh Console electric on wheels with centralized commands joysticks and digital readout. Digital readouts of the rolls position bending and pre-bending. Re-rolling system for welded shells rounding. Opening front side hydraulic drop-end to unload the closed shell. Variable speed working roll bending rotation hydraulic speed fast/slow. Voltage supply 3 phase Vac, electric power 40 Hp.

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Isdpfez Rny Nex Afueih Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 22300 € Iijdpfewirurox Afuoh 428.16 € 1 2030 mm 6 mm 6 mm 5 mm 170 mm 4 kW 3600 mm 1020 mm 1120 mm 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: like new (used), functionality: fully functional, total width: 1,000 mm, total length: 1,575 mm, table height: 850 mm, plate height: 200 mm, Granite Plate (Thome) Iiedpoynwq Uofx Afush - Dimensions 1575 x 1000 x 200mm - Quality appx. Class 00 (will be checked) - with aluminum frame - working level 850 - 900mm - surface refurbished

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, total height: 850 mm, total width: 1,000 mm, total length: 1,000 mm, overall weight: 1,000 kg, plate height: 160 mm, Granite Plate Iisdpfsvki S Eox Afuoh - Dimensions 1000x1000x160mm - Quality 0 (with certificate) - incl. steel frame and cabinet - on demand including roof construction (additional € 200,--) - surface refurbished

Condition: good (used), total height: 890 mm, Tension tower, manufactured by Lang Iiedpfx Afez E Saheueh 192 x 192 mm square Height 890 mm or 860 mm, excluding adapter plates Base plate 384 x 384 mm Weight approximately 200 kg Several of these tension towers are available.

Condition: used, Year of construction: 2019, Used Machine Year of Manufacture: 2019 Features and Technical Specifications: - Cutting height: vertical 2,150 mm, horizontal 2,070 mm - Cutting length: 5,300 mm Iodpszk Nwqjfx Afuoih - Cutting depth: 80 mm - Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow roof teeth - Saw blade speed: 5,000 rpm - Motor: 5.5 kW - Required air pressure: 6 bar Dimension readout for: - Horizontal cuts: via scale and strip-cutting stop - Vertical cuts: via scale from 0 to 1,300 mm - Exhaust port: 100 mm - 5 material support rollers per meter of cutting length - 1 feed roller and 1 discharge roller - Pneumatic workpiece clamping device between the support rollers - 1 center support element per meter of cutting length - Torsion-resistant, freestanding machine frame - Pneumatically retractable slatted bed - Round bar guides (vertical and horizontal) - Fine-adjustable folding stop - Fine adjustment for horizontal saw cuts via handwheel - Strip-cutting stop - Manual programming rail with 5 slotted blocks - Pneumatic lowering of the saw unit - Pneumatic saw head lock - Control panel on the saw unit: Start button, Stop button - Control panel with template holder - Electronic digital display for the saw unit - Electronic digital display for the folding fence - Automatically swiveling saw head

Condition: excellent (used), Year of construction: 2020, overall weight: 32,000 kg, total height: 450 mm, total length: 8,000 mm, total width: 4,000 mm, 10 units CFM Schiller Air Spring levelling system GRB 780 MD Load 7900 Kg each Air Spring Stiffness 770 N/mm Controller CFM LC 300 Very little used, new price EUR 200.000     Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 450mm Iiodpfszw Eyzjx Afujh No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 8000kg Number of matching pieces: 4 Length: 8000mm Width: 4000mm Height: 450mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, overall weight: 3,900 kg, total height: 300 mm, total length: 3,520 mm, total width: 2,000 mm, plate height: 300 mm, Floorplate Length: 3520mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 3900kg Number of matching pieces: 1 Length: 3520mm Width: 2000mm Height: 300mm Iiedpfjzw Ezrjx Afush Weight: 3900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, plate depth 6000 mm plate width 1100 mm plate height 200 mm weight of the machine ca. 4100 kg required space 6000 x 1100 x 200 mm Ijdpfx Afjy S Dnvsusih GERD WOLFF clamping plate 6000 x 1100 x 200 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slots - width: 42 x 22 mm T-slot spacing: 200 mm Number of slots: 5 Edge distance: 125 mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III Keywords: Clamping plate, Machine table, Workpiece clamping, Fixing holes, Clamping system, Tool clamping surface, Clamping device, T-slot plate, Precision plate, Modular clamping plate, Hole system, Mounting plate, Workpiece fixation, CNC machine clamping plate, Machine base

Condition: used, plate width 2870 mm plate depth 2000 mm plate height 300 mm weight 5200 kg flute distance 250 mm 3 identical plate fields available (A2017) LxWxH: 2870 x 2000 x 300mm Area for 3 slab fields: 17.22m² Dimension of the T-slots; 36 x 64 mm - height: 45 mm Iijdpfx Aoy S Dzijfujh Weight: KG

Condition: used, length / mm width / mm Isdpoy S Dzpjfx Afujih

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. Iijdpfx Ajy S D Nmjfush cutting angle 0,5 - 2,5 ° total power requirement 30 kW weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor

Condition: used, length / mm width / mm height / mm weight / kg Iiedoy Suzmopfx Afujh

Condition: used, length / mm width / mm height / mm weight / kg Iisdoy Suztjpfx Afuoh

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 250 mm weight of the machine ca.: 4,6 t space requirements of the machine approx.: 4,0 x 1,5 x 0,25 m Iedpfx Afjzcwr Isueih *

Condition: good (used), PERMANENT CIRCULAR MAGNET Iisdpezi A U Tefx Afuoh with radial pole pitch Technical data: Diameter: 500 mm Height: 80 mm Features: Flange D: 370 mm, ISO50, M24 for KELLENBERGER cylindrical grinding machine Condition: good

Condition: used, Alignment and welding plate, made of cast steel – gray cast iron, heavily ribbed formerly used as a scribing and measuring plate heavy-duty alignment plate Length: 2000 mm Width: 1000 mm Thickness: 240 mm Working height: 850 mm Plate thickness: approx. 30 mm, continuous - 5 adjustable feet Weight: approx. 1000 kg Iiodpfx Afszxr Tdeueh good surface condition

Condition: used, Year of construction: 2008, Product Information "Nosstec Round Bending Machine" 4-Roll Round Bending Machine with crowning Type / Model Nossebro Luna 8268 30/20 Condition Used Year of Manufacture 2008 Technical Data Maximum working length 3,040 mm Max. sheet thickness (400N/7mm2)(t) 2.0 mm Number of rolls 4-roll system (arranged asymmetrically/symmetrically) Driven rolls All 4 rolls individually driven Iiedezp Ip Aspfx Afush Roll diameter (top roll) 140 mm Motor power 2.2 kW Power connection 400 V / 3-phase Control voltage 24 V Equipment: CNC control Mylock 100 Features - CNC control with the capacity to store 200 programs in internal memory and virtually unlimited programs by attaching an external USB flash drive - Pre-bending and final bending in one cycle - The pre-bending value is approximately 70% of the specified material. - All four rolls are driven - Crowned rolls - Programmable axis - Designed for highest accuracy - Adjustable crowning of the lower roll - Program backup via external computer or connected USB stick Inquiry item: Transport costs in an individual offer.

Condition: used, Year of construction: 1992, Second-hand machine Year of manufacture: 1992 Iijdpfxjzk Nnvj Afush Features and technical specifications: - Saw blade diameter 300 mm - Saw blade speed 4,750 rpm - Motor power 4.5 kW - Motor speed 2880 rpm - Max. cutting width: 5,300 mm - max. cutting height: 2100 mm - max. panel height: 2200 mm - max. machining thickness: 80 mm - with small-parts support - Dimensions: approx. 6,500 x 1,300 x 2,880 mm - Weight: approx. 900 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Used equipment Features and technical specifications: - Single-sided loading surface made of plywood - 5° incline - Side rail height: 915 mm - Powder-coated in RAL 5010 gentian blue - Durable surface protection - Impact- and scratch-resistant - Tires made of thermoplastic rubber on plastic rims - With precision deep-groove ball bearings, gray, non-marking - Thread and foot protection - 2 swivel casters with wheel locks and 2 fixed casters - 1500 x 370 - Wheel diameter (mm): 200 x 40 - Load capacity (kg): 500 Dimensions: 1500 x 680 x 1200 mm Weight: 47.5 kg Iijdpfozk Nr Iox Afush Availability: Available shortly Storage location: Flörsheim