Used Pipe Production for sale (18,673)

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 65 mm, weight 2.8 t /// Drive: Thyssen Henschel TPM 3-65-DOS-25, serial number 6333547/13, weight 710 kg (1) Calibration table Technical details: Table length approx. 6 m Ksdpox I Itbsfx Adtowt (1) Haul-off unit Technical details: Contact length approx. 1,500 mm (1) Film application unit (1) Saw unit Technical details: Upward stroke, saw blade diameter 250–400 mm, profile gap WxH 340 x 20 mm / diameter 115 mm, sequence max. 40 cuts/min (1) Tilting table Technical details: Length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Kedpfxjx I Inxo Adtjwt Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Length approx. 6,000 mm (1) Twin-screw extruder Technical details: Screw diameter 90 mm, max. capacity 300 kg/h, BMCsmart control panel, weight approx. 3 t /// Drive motor HENSCHEL T1MAX90 C-35L, serial number 43-220/5, weight approx. 1.5 t (1) Calibration table Technical details: Table length approx. 6 m Kwodpfsx I Ig Uox Adtst (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Line consisting of: (1) Twin-screw extruder Technical details: Kodpfxox I Emfe Adtjwt Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: With three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed 0.1–11 m/min, pulling force 25,000 N, contact length 1,500 mm, profile clearance WxH 300 x 180 mm (1) Punching device + guillotine unit Technical details: Punching force 1,800 N, design: C-frame, punching frequency 130 strokes/min, punching tool LxWxH 185x180x132 (1) Tilting table Technical details: For pushing a single-strand roller shutter into an adjacent profile, table length approx. 6,000 mm

Year of construction: 2009, condition: reconditioned (used), Complete plant for the production of wood wool/wood shavings out of logs with a lngth up to 3,0 m. Total capacity about 4 to/h. Complete control system including knife grinding machine, several planer heads, conveyor system for wool transport. Exhausting system. very good condition. Kwedpfx Adoiiia Rstet

Condition: used, Year of construction: 2011, Technical details: tube diameter: 60 mm wall strength: 3,0 mm bending radius min.: 20 mm tube diameter max.: 60 mm wall thickness max.: 3,0 mm tube pipe draw up length: 1500 mm bending angle max.: 180 + Auffederung ° Number of working hours: ca. 34 797 h Total power requirement: 55 kW Weight approx.: 8,0 t Kwedpfx Asx Sll Aedtst machine dimensions LxWxH: 6,3 x 3,3 x 1,9 m dimensions electric cabinet LxWxH: 2,7 x 0,7 x 2,0 m dimension device 1: Steuerpult: 0,9 x 0,6 x 1,85 m dimension device 2: Rohrmagazin: 1,8 x 2,4 x 1,75 m This is an automatic pipe cold bending machine. Multiple radii can be bent. Radius differences freely programmable via CNC control up to 6 levels. Pipe positioning device in NTB design Pipe diameter: min. Tube Ø : 16mm max. capacity of machine Tube Ø x wall thickness: mild steel=Ø 60x3 mm and stainless steel=Ø 57x2 mm Bending radius to pipe center: min. Ø 20 mm max. Ø 200 mm Bending to left. max. tensile strength of the material to be bent: Stainless steel 750 N/mm² mild steel 450 N/mm² max. bending speed: FORWARD, infinitely variable / programmable 22.0 1/min. RETURN, constant 22,0 1/min. Height adjustment multiple radii: lowest tube center 55 mm Height travel suitable for 3-groove bending tools Twisting: Twisting angle max. 360°; speed 50 min-1 -gripper -tube magazine Schwarze-Robitec, tube length min./max.: 400 7 1500 mm, tube outer Ø min./max.: 28 7 60 mm -Hydraulic filling volume 340 liters -Hydraulic operation for: bending table drive; tool clamping; slide rail pressure, direct acting; reinforced slide rail feed and return; mandrel return feed device -operator/control panel from Schwarze Robitec -2x foot contact operation -cooling unit on control cabinet Rital, type SK 3361100 accessories: div. bending tools for Ø 60 mm tube div. auxiliary tools *

Condition: excellent (used), Year of construction: 2023, GHS Type: VDS-S30 / VUTS-EC Vacuum Drying Oven with Vacuum Pump Year of Manufacture: 09/2023 Professional vacuum drying oven with pass-through function – ideal for cathode & anode materials The GHS VDS-S30 / VUTS-EC vacuum drying oven is used for drying cathode and anode materials in battery cell manufacturing. Additionally, it serves as a pass-through into controlled dry rooms (e.g. Kwsdpfx Adow Ekd Djtot

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 3818, overall weight: 500 kg, Knopp Rundomat for sale. 100% ready for operation. Kjdpox U Eimofx Adtswt The price is fixed and non-negotiable.

Year of construction: 2007, condition: good (used), Shuffle-Mix Type 500 ltr Kwodpfx Adeqc U Spjtot Stainless steel

Condition: used, WEISS MAIN SPINDLE 1P JBD:168347 The article is used, comes from an industrial machine dismantling and was in operation until it was reassembled. Please note that this is a sample image, which may have different signs of use and/or software stocks. Brand names, trademarks and registered trademarks are the property of their legal owners and are used here for description purposes only. You can find more information on our homepage Ksdpfx Aevr E Dgsdtewt *

Condition: used, Tool turret TER Type:0.5.480.525 The article is used, comes from an industrial machine dismantling and was in operation until the dismantling. Please note that this is a sample image, which may have different traces of use and/or software. Brand names, trademarks and registered trademarks are the property of their legal owners and are used here for descriptive purposes only. Further information can be found on our homepage Kwsdsvi Hvlopfx Adtst *

Condition: good (used), Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, serial hole punch, punching machine, punching press -Box tube punch: 50 x 30 mm -2x quick-change tool holders (for round tubes and rectangular tubes) -with tools round tube punch and rectangular tube punch Ksdsb A I Hdjpfx Adtswt -Coordinate stop -Protrusion: 155 mm -Quick-change system punching -Side and depth stops -Max. punching capacity: 36 t -Weight: approx. 2000 kg

Condition: good (used), Pipe grab, round grab -self-locking -Replacement arms -up to approx. max.: Ø 150 cm -Clamping claws -Total weight: 350 kg Kodsb A I Sbjpfx Adtjwt

Year of construction: 1995, condition: good (used), Pipe suspension, shaft ring suspension Kwodpfob A I Uvox Adtjt -Load capacity: 10 tons -Chain length: 2000 mm -Weight: 80 kg

Condition: good (used), Pipe suspension, shaft ring suspension -Load capacity: 3 tons -Chain length: 1100 mm -Weight: 96 kg Kwjdeb A Na Dopfx Adtet

Year of construction: 2006, condition: excellent (used), Type: Unicut 547 Serial number: 5435 Year of construction: 2006 Block size: max 1200 x 640 x 380 mm Cutting width: 680 mm Thickness: 10 - 60 mm Air pressure: 6 Bar, 500 L/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 3400 x 1300 x 2650 mm Kedpok Twx Hjfx Adtswt Weight: 2500 kg Type: Galan 930 Serial number: 5431 Year of construction: 2006 Product size: max 370 x 160 mm Product length: 6 - 130 mm Cutting set: 20 mm Belt width: 360 mm Air pressure: 6 Bar, 20 L/min. Power: 3 x 400V, 50Hz, 7kW Dimensions: 4350 x 1250 x 1700 mm Weight: 1000 kg

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 03/1827/93, power: 7.5 kW (10.20 HP), Unscrewer for 2 modular crates AfG 20 x 0.5. The machine can also be used as a decapper (accessory required). Includes roller conveyor and complete documentation. The machine can be inspected on site. Price ex location. Kwsdoyaywnepfx Adtet

Condition: like new (used), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, total height: 2,600 mm, total width: 2,500 mm, total length: 8,000 mm, overall weight: 3,000 kg, machine base height: 100 mm, operating pressure: 4 bar, control cabinet height: 2,000 mm, temperature: 120 °C, compressed air connection: 8 bar, control voltage: 12 V, operating temperature: 20 °C, water tank capacity: 100 l, sheet thickness aluminum (max.): 3 mm, air demand: 3 m³/h, Bottling machine for bottles (0.5l and 0.25l) The bottles are fed to the machine via a conveyor belt and washed. Afterwards, the filling process takes place, followed by sealing with a twist-off cap. The filled and sealed bottles are then transported out of the machine on a conveyor belt and can be packaged. All machine functions are fully operational. Kjdpfex Sawtex Adtjwt The bottling machine is as good as new but not suitable for our application. The machine was manufactured in China, with the control system supplied by Siemens. The machine is assembled and available for inspection. A demonstration of the process can be arranged. Appointment required!

Condition: good (used), Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device -Diameter: Ø 63 mm -Weight: 0.6 kg Kedpfsb A Hdiex Adtowt

Condition: good (used), Pipe welding accessories, forming gas welding equipment, forming gas welding aid Ksdsb A N Apspfx Adtowt -Diameter: 600 mm -Rubber sealing lip -with transport rollers for disassembly from the pipe to be welded -Dimensions: 650 x 450 mm -Weight: 18 kg

Condition: good (used), Link pipe cutter, pipe cutter -cutting pipe diameters: 80 - 200 mm Ksdsb A Rgzspfx Adtswt -The number of links allows the device to be adjusted to the desired pipe diameter. -steel cutting wheel -Ideal for working in trenches -Transport case -Weight: 11 kg

Condition: good (used), Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Capacity: 100-400 mm -Double clamping device: for pipe mounting -Dimensions: 1000/450/H260 mm Kwodpfsb A Rkmex Adtjt -Weight: 22 kg

Condition: good (used), Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes Kwodpfxjb A Rkdo Adtot -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Condition: good (used), Pipe vise, pipe stand, pipe vise, plumber's vise, pioneer -Max. clamping range: Ø 75 mm -with: storage Kjdpfx Asb A N E Hsdtewt -Number: 1x Pioneers available Price: per piece -Dimensions: 1300/900/H160 mm -Weight: 20 kg

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, Corundum Disc Mill (as new) with 150 µm filter insert – ideal for fiber separation (soy, oat milk, etc.) For sale are 2 corundum disc mills in excellent, as-new condition. These units are ideally suited for fiber separation / fine filtration in the production of plant-based beverages such as soy milk, oat milk, and similar suspensions. Highlights - Corundum disc mill for reliable, process-stable preparation - Includes 150 micron filter insert for effective fiber separation - Suitable for soy, oats, rice, peas, etc. (depending on recipe/setup) Kedpfx Aex T Dabjdtswt - As new – being sold due to plant scaling/upgrade - Ideal for pilot and production-scale operations, process optimization, and quality improvement (mouthfeel, stability) Scope of Delivery - 2× Corundum disc mills - 2× 150 µm filter inserts - Optional: Inspection/test run available by arrangement Price & Terms (Single sale or as a set possible) Location/collection and further details (performance, connections, manufacturer/nameplate, year of manufacture) available upon request.