Used Pallet Strapper for sale (6,704)

Condition: used, Year of construction: 2008 Carrying capacity: 4.000 kg Lrjdsz S E Uaspfx Abyju Fork length: 1,2 m

Condition: used, Year of construction: 2016, Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Technical data - Manufacturer: Haloila - Model: Octopus Compact, inline version - Year of manufacture: 2016 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Designed output: 32 pallets per hour (reference pallet height 1,200 mm, 14 wraps per pallet, double wrapping) - Pallet formats: 1,000 x 1,200 mm, Euro 800 x 1,200 mm and special 1,200 x 1,200 mm - Load: up to 1,200 x 1,200 mm, height 500 to 1,200 mm, up to 1,000 kg - Conveyor: roller conveyor, height 390 mm, speed 15 m/min, effective width 1,285 mm, roller pitch 166 mm, Movimot geared motors - Film carriage: AC-powered, pre-stretch up to 230 % - Film seaming: heat-seal pad - Power supply: 3 x 400 V, 50 Hz + N + PE Lredpfxjz R Sxdo Abyou - Connected load: 4 kW - Rated current: 10 A - CE mark on the machine plate Equipment - Rotating ring with film carriage and film pre-stretch unit - Roping device - Pallet roller conveyor through the winder, with chain transfer section and pneumatic pallet lifter with sensors - Photoelectric sensors for pallet and load height detection, photocells for load position - Control cabinet and touchscreen operator panel (German), signal tower - Signal exchange interface (DP/DP coupler) for connection to a line control - Safety fencing around the wrapping zone, safety light curtains at infeed and outfeed with muting - Restart push-buttons at the infeed Condition Used, very good condition and fully functional. Out of production since July 2024. Sold without warranty. Availability Available immediately. The machine is still installed: dismantling and loading are to be arranged by the buyer. The matching oil filling line from the same site can also be offered on request. Location: Germany.

Condition: used, Year of construction: 2007, machine/vehicle number: PAL53, Used COMACO PA4B palletizer 10800 BPHTechnical Specifications & Performance DataThe Comaco PA4B is a second hand, overhauled palletizer engineered for reliable end-of-line handling in beverage production and industrial packaging. Built in 2007 and professionally refurbished, this unit delivers robust performance with a maximum throughput of up to 10,800 bottles per hour (3x2 configuration), making it a strong fit for used bottling line upgrades where efficiency and footprint matter.Model: PA4BManufacturer: ComacoYear: 2007Maximum speed: 10,800 bottles per hour (3x2 pattern)Container materials supported: Aluminum cans, PET bottles, Glass bottlesPallet formats: Eur-Epal 800x1200 mm; 1000x1200 mmInstalled power: 1.4 kWElectrical supply: 400 V, 50 HzWorking pressure: 6 barApproximate footprint: 8165 x 7777 mmLayout note: Working height H = 1100 mm (as indicated on layout)Configuration: Conventional automatic palletizer with automatic layer-pad inserterAdvanced Automation & Control SystemsDesigned for dependable automation, the PA4B integrates proven Siemens control technology for stable operation and easy diagnostics. A Siemens Simatic HMI provides intuitive operator interaction, while the Siemens S7 PLC ensures precise motion control and sequencing.HMI: Siemens SimaticPLC: Siemens S7Operational mode: Conventional automatic palletizing with layer-pad applicationChangeover: Practical adjustments for varying pack patterns and container typesProduction Line Integration CapabilitiesThe Comaco PA4B integrates smoothly with upstream packaging machinery such as shrink wrappers, wrap-around case packers, and conveyors. It handles a wide range of secondary packaging units, including bundles, cases, and tray-packs, supporting both PET and Glass bottle lines as well as Aluminum cans.Inline/standalone: Suitable for inline integration or standalone operationHandled units: Bundles, cases, tray-packsMulti-product flexibility: Compatible with water, CSD, beer, wine, milk, oil, and spirits workflowsPallet formats: Eur-Epal 800x1200 mm; 1000x1200 mmMachine Condition & Maintenance HistoryThis palletizer is overhauled, tested, and ready for operation. Supplied in excellent working order with a commercial guarantee, it is an ideal choice for facilities seeking a reliable second hand upgrade with minimized commissioning risk.Status: Ready for immediate useCondition: Overhauled and guaranteedWarranty: 6 monthsSpare parts: Compatible spare parts availableOperational Performance & VersatilityThe PA4B addresses diverse end-of-line need... Lrjdps Adtzqofx Abysu

Condition: used, machine/vehicle number: W41153L00104, Year of construction: 2022, operating hours: 3,050 h, load capacity: 2,000 kg, lifting height: 150 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 150 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 166 Ah Battery voltage in idle state: 25.3 V Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,300 mm Own weight: 900 kg Lodpez S Nv Usfx Abyeru Operating hours: 3,050 h EQUIPMENT Folding platform Formerly a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 397

Condition: used, SolidHub Electric High Lift Pallet Truck Lodpsz Hx Izjfx Abyjru The electric high lift pallet truck has only 76.3 operating hours. It features a maximum lifting height of 4,000 mm, a load capacity of 1,200 kg, and a foldable operator platform with side guardrails. The electric high lift pallet truck is particularly suitable for: • Warehouses and logistics • Order picking • Loading and unloading • Internal pallet transport • Loading and unloading in pallet racking • Technical data • Manufacturer: SolidHub • Model: CDD12-030 • Load capacity: 1200 kg • Lifting height: 4000 mm (4 meters) • Load center: 600 mm • Fork width: 550 mm • Fork length: 1150 mm • Recommended battery capacity: 210 Ah • Weight without battery: 978 kg • Serial number: 080127N1700 • Operating hours: 76.3 h Equipment • Electric lifting and driving system • Foldable operator platform • Side guardrails • Ergonomic tiller control • Electric lifting and lowering function • Battery charge level indicator • Emergency stop switch New price: €7,860.00 (gross)

Condition: used, operating hours: 5,861 h, lifting height: 200 mm, fuel type: electric, fork length: 2,390 mm, total height: 1,500 mm, total length: 3,550 mm, total width: 800 mm, color: orange, Year of manufacture: 2020 Empty weight: 1.224 kg Lifting capacity: 2.400 kg - Year: 2020 - Documentation available: Yes Lrsdozwukiopfx Abyou - CE marking present: Yes - CE certificate present: No - Serial number: F20178X00129 - Operating hours: 5861 - Type: Sta palletwagen - Lifting capacity: 2400kg - Lifting height: 200mm - Fork length: 2390mm - Fork width: 560mm - Drive: Electric - Battery information: - └ Brand/Type: 24V 3PzS 465 STILL - └ Battery year of construction: 2020 - └ Capacity: 465Ah - └ Battery voltage: 24V - └ Tray length [mm]: 715 - └ Tray width [mm]: 285 - └ Tray height [mm]: 780 - Transport dimensions: 3550mm x 800mm x 1500mm (l x w x h) - Transport weight [kg]: 1224kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi11, Stretch Winder Synthesi Freezer -30 IP65 TECHNICAL DETAILS Turntable / base frame / Ø 1500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs Lsdpoz Iq I Asfx Abyjru F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: good (used), Approx. 150 Euro pallets/stacking frames, suitable for immersion – used: Price per unit ex works: Purchase of up to 50 units: €79.00 (net), Purchase of over 50 units: €75.00 (net), Lodpfx Aj Aa Dugobyoru Manufacturer: unknown, possibly varying Weight: approx. 70 – 85 kg Load capacity: approx. 900 - 1,500 kg Stacking load: max. 6,000 kg Load volume: approx. 0.75 m3 EPAL marking Dimensions approx.: Length: 1,200 mm Width: 800 mm Height: 970 mm One long side partially foldable Condition: good Available: immediately Location: D-06766 Bitterfeld-Wolfen

Condition: used, Year of construction: 2004, machine/vehicle number: PAL55, Used OCME PERSEUS L12 palletizer 22680 BPHTechnical Specifications & Performance DataThe OCME Perseus L12 Palletizer is a conventional automatic palletizing system engineered for wrap-around packs and cases. Built in 2004 and featuring a robust mechanical design with Siemens automation, it delivers reliable performance for high-volume beverage and food packaging environments. Designed to handle products packed in cartons coming from upstream wrap-around or case packing machines, it supports standardized pallet formats for streamlined logistics and warehousing.Manufacturer: OCMEModel: Perseus L12Machine type: Palletizer (conventional, low-level infeed)Year of manufacture: 2004Maximum speed: 22680 (3x2 pattern)Handled unit: Wrap-around packs / casesSupported pallets: EPAL 800x1200 mmContainer materials downstream of packs: PET, Glass, Aluminum cansAutomation: Siemens PLCCompressed air: 6 barLayer pad inserter: AutomaticCompliance: CE-markedAdvanced Automation & Control SystemsThe Perseus L12 integrates a Siemens PLC for dependable control, recipe management, and precise coordination of infeed, layering, and discharge operations. The HMI-driven interface enables quick format selection and parameter adjustments to minimize downtime. Safety interlocks and a multi-color stack light provide clear visual status and enhance operator awareness. Modular programming supports stable layer formation and accurate placement of interlayer pads to ensure load integrity.Siemens PLC with user-friendly HMIRecipe-based format management for rapid changeoversIntegrated safety interlocks and emergency stop circuitsAutomated layer pad insertion synchronizationProduction Line Integration CapabilitiesEngineered for seamless integration into a used bottling line or second hand industrial packaging setup, the Perseus L12 accepts cartons from wrap-around or case packers and forms stable pallet loads. It interfaces easily with standard conveyor systems and can be configured for various layout constraints due to its low-level infeed design. It is suitable for beverage production handling of PET, glass, and aluminum can packs, making it ideal for water, CSD, beer, wine, milk, oil, and spirits applications.Inline operation with wrap-around packers and case packersDesigned for PET, Glass, and Aluminum can packsOptimized for EPAL 800x1200 palletsMulti-format flexibility for diverse product SKUsMachine Condition & Maintenance HistoryThis palletizer is ready for operation, overhauled, and offered with compatible spare parts. It includes a warranty period to ensure dependable startup and performance. The overall condition supports immediate deployment into beverage or food packaging lines with minimal commissioning effort.Ready for immediate useOverhauled with compatible spare partsWarrant... Lrsdpfx Aj Adyu Rsbyou

Condition: good (used), functionality: fully functional, machine/vehicle number: 91584068, Year of construction: 2014, operating hours: 1,178 h, load capacity: 2,500 kg, lifting height: 200 mm, battery capacity: 344 Ah, battery voltage: 24 V, fork length: 2,350 mm, Equipment: UVV, power assisted steering, Jungheinrich EJE 225 Electric Low-Lift Pallet Truck, fully stainless steel Year of manufacture: 2014 Operating hours: 1,178 h Battery year: 05/2021 Battery capacity: 344 Ah at 24 V Load capacity: 2,500 kg Fork length: 2,350 mm Ledpfx Aoyi Hcpsbyeru Power steering Current new price over €50,000 The truck can also be operated with the footplate folded up. Charger included The equipment works flawlessly and is ready for immediate use. Affordable delivery by a specialist company available. Have a look at our other listings as well. We always have many more high-lift and low-lift pallet trucks and forklifts in stock. Need spare parts for your forklift, high-lift pallet truck, etc.? Just contact us.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 19.60 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Lrsdpfx Aj Adtdlobysu Shelving consists of : - 08 x uprights approx. 450 cm x 110 cm, pre-assembled. - 28 x crossbar approx. 270 x 14 x 5 cm, T30. - 56 x locking pins. - 56 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 63 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 4.100 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, GALVANIZED PALLET RACKS FOR OUTDOOR USE Hot-dip galvanized pallet racks for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 16.80 running meters Lredpfx Ao Adtc Isbyou - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 007 x upright approx. 450 cm x 110 cm, pre-assembled. - 024 x crossbar approx. 270 x 14 x 5 cm, T30. - 048 x Locking pins. - 048 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 54 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 3550 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display Lrsdpfx Aez Ipdvobyju F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 14 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x uprights approx. 450 cm x 110 cm, pre-assembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x locking pins. - 40 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2.990,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Lodpfo Adtcbsx Abyoru Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty rack designed to meet demanding industrial storage requirements. The modular high-bay racking is ideally suited for logistics centers, industrial operations, large warehouses, and freight forwarding companies. With a load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy loading units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 1,400 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow powder-coated - Frames: approx. 400 x 105 cm, pre-assembled - Frame color: blue powder-coated - Levels: Floor + 2 - Pallet spaces: 45 including ground level Lredo Aawm Ajpfx Abyju - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 06 x frames (approx. 400 x 105 cm), pre-assembled - 20 x beams (approx. 270 cm) - 40 x locking pins Price: €1,060.00 net €1,261.14 gross An invoice with VAT shown separately will be issued. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner hauliers – shipping costs depend on delivery postcode - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding offer – tailored exactly to your requirements. Whether for new builds, upgrades or expansions – we will support you with expert advice on your racking configuration. SHOWROOM: Visit us in our showroom! Experience our pallet racking, warehouse shelving, and other storage solutions firsthand. Many systems are assembled for live demonstration. Our experts are available for your questions and individual consultation – we look forward to welcoming you! Haven’t found the right solution yet? Visit our website for a quick overview of many more products and variations! INTERESTED OR HAVE QUESTIONS? Contact us by message or phone – our telephone number can be found on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) Lrjdez Ipwcspfx Abyou F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: good (used), Year of construction: 2015, operating hours: 4,630 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 600 kg, mileage: 4,630 km, This pallet truck, manufactured by the German brand STILL, dates back to 2015 and is in good condition. Its capacity is 2,000 kg. It has 4,630 operating hours. It can be used as either a ride-on or a walk-behind pallet truck. The forks are 1,150 mm long. The battery, which is from 2019, is maintenance-free (gel type) and comes with an external charger. Ljdoz Atfpjpfx Abyeru

Year of construction: 2017, condition: excellent (used), Pallet Changer. The concept of this is to provide totally hands-free pallet exchange and Premier have made constant improvements to this system over the last 10 years to make it the versatile unit it is today. A great number of Pallet Changers sold to date have been to the pharmaceutical industries and although it is the most expensive machine in Premier's inverter range, it has proved to be ideal in eliminating manual handling. Can handle loads up to 2050mm high, 1500 kgs weight. Lrjdpfop Am Shsx Abyou Floor fixed guards with photobeams at the front. Handles all conventional sized pallets. To totally avoid manual handling, two pallet stackers can be placed to the side of the Pallet Changer.

Condition: new, Pallet racking, hot-dip galvanized, for outdoor use Specifications: - H: approx. 450 cm - D: approx. 110 cm - L: approx. 8.40 meters - Load capacity: 3000 kg per shelf - Uprights in hot-dip galvanized steel - Beams 270 x 14 x 5 cm, T30 - Beams in hot-dip galvanized steel - New product BLT / PR45 FVZ - Manufactured in Europe & tested according to current DIN EN 15512 standard. - 100% quality at the best price. Racking consists of: - 04 x uprights approx. 450 cm x 110 cm, pre-assembled. - 12 x beams approx. 270 x 14 x 5 cm, T30. - 24 x safety pins. - 24 x locking screws M8 x 20 incl. nut. - Levels: base + 2 Lrjdpj Adtd Esfx Abyou - 27 pallet spaces incl. base spaces. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €1900.00 net plus applicable VAT. You will receive an invoice with VAT shown. Delivery: Delivery can be arranged through our partner shipping company if required; the costs depend on the postcode. Assembly: Our trained personnel will be happy to assist you with the professional assembly and disassembly of your equipment, if required. Our recommendation: Please let us know your requirements... We will gladly help you with the implementation of your projects, from planning to ordering and assembly. Customer note: When assembling the safety pins/locking screws, any holes that may have been sealed by the hot-dip galvanizing process may need to be re-drilled. Unfortunately, this cannot be completely ruled out with high-quality hot-dip galvanizing. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2018, operating hours: 1,890 h, load capacity: 1,398 kg, fuel type: electric, mileage: 1,890 km, JUST ARRIVED Electric pallet truck Brand: STILL Year of manufacture: 2018 Only 1,890 hours on the meter Fork length: 1,600 mm Capacity: 1,400 kg Battery Automatic filling system Lrsdszxxwcepfx Abyju EXTERNAL charger Video to follow

Condition: good (used), Year of construction: 2017, operating hours: 1,945 h, load capacity: 2,000 kg, fuel type: electric, mileage: 1,945 km, Electric pallet truck Brand: Still (Germany) Year of manufacture: 20 ONLY 1,945 hours Capacity: 2,000 kg Fork length: 1150 mm, suitable for Euro pallets Lrodjz Drfbepfx Abysu Battery with charger Automatic filling system

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Lrodpfjz Iqnvox Abyju Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 415 h, load capacity: 1,400 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 600 kg, total length: 481 mm, drive type: Elektro, construction width: 726 mm, Low-lift pallet truck Load center: 600 Lrsde Admpuepfx Abysu Mast type: None Technical condition: very good Front tire type: Polyurethane Front tire condition: 100% Rear tire type: Polyurethane Rear tire condition: 100% Battery voltage: 24V Battery capacity: 105Ah Battery year of manufacture: 2020 Description: Used unit, refurbished by Toyota, including a new inspection and new acceptance test according to FEM (formerly UVV). Impulse control, CE certificate.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products Lredpfx Abez Iqp Tjysu cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 11.20 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized Lrodpfs Adtdxjx Abyeu - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelving consists of : - 05 x upright approx. 450 cm x 110 cm, pre-assembled. - 16 x crossbar approx. 270 x 14 x 5 cm, T30. - 32 x locking pins. - 32 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2450 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.