Used Minarc Mig for sale (405)

Condition: good (used), Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW Dedjqvp Nkspfx Acwswb -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Condition: good (used), Inert gas welding machine, arc welding system, MIG/MAG welding system -max. welding power: 320 A -4-roller drive -Water cooled -Wire feed: separate, mobile Djdpfefbz Nrex Acwswb -Accessories: hose package, ground cable, gas fitting -also suitable for robots -Quantity: 1x piece available -Dimensions: 1155/500/H1030 mm -Weight: 263 kg

Condition: used, MIG/MAG hose package extension, intermediate hose package Djdsd Slazepfx Acwjwb -Length: 11.0 m -Plug -Water cooled -Weight: 20 kg

Condition: used, MIG/MAG hose package extension, intermediate hose package -Length: 16.0 m Dwedpfed S D Dmjx Acweb -Plug -Water cooled -Weight: 16 kg

Condition: used, Technical details: capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg dimensions of machine: 1,05 x 0,70 x 1,2 m capacity: 21 kVA Dwodpfx Acou Nwctowob Welding rectifier MIG / MAG Cooling type F Protection class IP 23 Isolation class F incl. wire feed device, feed rate 0,5 - 20 m/min *

Condition: good (used), MIG/MAG hose package extension, intermediate hose package -Welding cable: extension / connection cable water-cooled -Length: 4.35 m -Version: Dinse plug, gas hose, control cable Dsdoucmncjpfx Acwewb -Connector: 4-pin -Transport dimensions: 470/460/H100 mm -Weight: 6.0 kg

Condition: used, MIG/MAG hose package extension, intermediate hose package -Length: 9.0 m -Plug -Water cooled -Weight: 12 kg Dwedpfx Aod Nu Inecwsb

Condition: like new (used), Year of construction: 2020, operating hours: 115 h, functionality: fully functional, machine/vehicle number: XYZ, degree of automation: automatic, I am offering several robots: two Fanuc M2000 with a payload capacity of 165 kg, one Fanuc M2000 with a payload capacity of 210 kg, and two Fanuc M10 welding robots. All robots have never been operated in automation mode, but have only been taught in. All robots have between 100 and 200 operating hours. Additionally, there are 3 Expert rotary tables including H-positioners, which can be equipped with fixtures. These are supplied complete with Fanuc motors as drive motors, which can be controlled via the robot controller. Djdpfx Acoy Af Daewowb Furthermore, 3 nearly new spot welding guns from ELMATEC, including SMC cooling units and control cabinets, are for sale. Two new automated MIG welding units from ELMATEC, including wire feeders, are also available for sale.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 17 h, functionality: fully functional, machine/vehicle number: 4153-3431-0023-7, type of input current: three-phase, total height: 892 mm, total width: 508 mm, total length: 1,090 mm, input voltage: 400 V, overall weight: 108 kg, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 32 A, open-circuit voltage: 80 V, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, input current: 32 A, protection type (IP code): IP23, welding current (min.): 20 A, welding current (max.): 400 A, Equipment: documentation/manual, type plate available, Demonstration unit, year of manufacture 2024 includes Lorch MIG-MAG torch iQ-LMS 400 W PM, 4 m. Dwsdpfx Acozki Szjwob

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 720 kg, warranty duration: 12 months, welding current (min.): 800 A, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, The SITEC ITR1200 CN is a tilting rotary table with CNC control, designed for circumferential welding of large components. Thanks to its robust structure, brushless drive, and fully programmable management, it guarantees high precision, reliability, and repeatability of the processing cycles. Key features: Table diameter: 1,000 mm Dwodpfx Ajzlih Secwsb Maximum load in the horizontal plane: 1,200 kg Rotation speed: 0.04 – 2 revolutions/min Bending moment: 300 kgm Torque: 150 kgm Hydraulic tilting: 0° – 100° Welding processes: TIG / MIG Brushless motor with permanent magnets and digital control CNC with integrated PLC Touch screen display for programming and cycle management Storage and retrieval of welding programs Setting of overlap, number of tack welding points, and processing parameters Rotating mass 800 A High-rigidity, electro-welded steel structure Advantages: High precision and repeatability of welding Complete control of processing cycles Reduced setup times High-efficiency and low-maintenance brushless drive Ideal for industrial production and heavy-duty machining Applications: Particularly suitable for welding tanks, vessels, flanges, dished ends, large-diameter pipes, and components for the energy, plant engineering, shipbuilding, and metalworking industries. Customization: The machine can be configured with numerous optional features and accessories, including pneumatic torch holders, dedicated supports, and further customizations to adapt to specific production requirements. For more information, photographs, demonstration videos, and available configurations, please do not hesitate to contact us.

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 500 kg, Cloos robot with Qineo Pulse MIG/MAG welding power source 6-axis industrial robot Dwsdpozty D Hjfx Acweb Arc sensor / Tactile sensor Automatic torch cleaning 2-station operation Shows signs of wear, but is fully functional The system has already been disassembled and palletized. Installation and commissioning can also be offered.

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE Dodewbknbopfx Acwjwb PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 Dodpfxex Eipvj Acwjwb -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. Dsdpfxsxf Hv Ho Acwjwb TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: excellent (used), Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system Dsdpfxjw Udtcs Acwowb -Manufacturer: Messer, cutting nozzle flame cutting nozzle 40 pieces Ovp -Type: Vadura 1215-A / A-SD 100-150mm / 2-100mm / 2-150mm -Type/Quantity: see photos / parts list -Cutting range: 2-150 mm -Price/Delivery: complete -Transport dimensions: 250/230/H50 mm -Weight: 0.9 kg

Condition: used, 50 units of Fronius TPS 450 welding machines, used 🧰 Product features • Manufacturer: Fronius • Model: TPS 450 • Condition: used, see photos • Color: red • Mains voltage: 380 V / 400 V / 415 V • Apparent power: 17.2 kVA • Efficiency: 90% • Welding current range: 3 - 450 A • Working voltage: 20 - 38 V • Open-circuit voltage: 50 - 80 V • Insulation class: F • Protection class: IP 23 • Cooling method: AF • Welding processes: MIG/MAG, MMA, WIG/TIG 💰 Price per unit: €1500 net, excluding VAT • Quantity discounts: available upon request • Shipping costs: available upon request, Europe-wide • Delivery time: immediately available • Inspection and collection: possible at any time by appointment We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty shelving, used & new Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving immediately available • 20,000 m² of storage platforms & steel platform structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelving with shelves, tire racks, or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough cleaning. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough cleaning. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving systems – we guarantee the best conditions. Contact us for a non-binding offer! Dwodeyn Ii Iepfx Acwsb

Condition: good (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: SY 330 -075, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Akyapak, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 330 mm, overall weight: 9,100 kg, total length: 4,585 mm, total width: 1,610 mm, total height: 1,840 mm, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, The sale includes a 2-meter longitudinal welding station equipped with an Oerlikon MIG 500 A welding unit, with all equipment in full working order. Dwodpjzzdahjfx Acwjb Also included are a lifting table for material handling to the plate rolling machine and a work platform. The plate rolling machine is in good condition and can be put into production immediately. The machine is currently operational, and inspection and test runs can be arranged upon request. With the inclusion of the longitudinal welding station, this package provides a complete solution for manufacturing tubes and special pipe sections to customer-specified diameters, with lengths of up to 2 meters.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Dedpfxeywgpas Acwjwb Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO20 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), For sale: Professional industrial welding machine KEMPPI Kempomat 320 – a robust and reliable unit for MIG/MAG welding. Equipment from renowned Finnish manufacturer KEMPPI, known for its high quality and durability. 📋 Technical specifications: Model: KEMPOMAT 320 Welding current: up to 320 A Power supply: 3-phase (380V) Voltage range: approx. 15.5V – 30V Duty cycle: 320 A – 40% 265 A – 60% 205 A – 100% Protection class: IP23 Insulation class: H Cooling: Fan 📦 Included in the set: Kemppi Kempomat 320 welder Built-in wire feeder MIG/MAG welding torch Ground cable Gas cylinder with regulator Hose + wiring Transport trolley 🛠 Technical condition: Used equipment Shows normal signs of use (scuffs, scratches) Cosmetic condition as visible in the photos Complete wire feeder (visible inside) Sold as shown in the photos ✅ Advantages: Very durable construction (industrial gear) Easy operation and parameter adjustment Powerful – suitable for heavy-duty workshop tasks Mobile thanks to the transport trolley Djdpfx Aoyzt Rlecwjwb ⚠️ Additional information: Ideal for workshops, production plants, steel structure fabrication Possibility of pallet shipping Personal pickup or shipping possible

Condition: like new (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 3,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Unused Lascentrum MIG/TIG 200 ACDC Synergic MIG & TIG ACDC for steel, stainless steel and aluminium. Ideally suited for use at home, on site, for general welding work, light steel/stainless steel/aluminium construction, and in the workshop. 5-200 AMP 230 Volt Synergic ACDC TIG Pulse 2/4 Step Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Pulse Time / Pulse Frequency AC Balance / AC Frequency adjustable AC Wave adjustable Spot welding Fixed programs / Program memory Elektrode option Including: Djdpfx Ajzqc U Aocwowb SB150 Welding torch 3 Meter SR17 Tig Welding torch Earth cable 3 Meter 35mm² Elektrode cable Gas hose Manual (If in the original packaging) Original Packaging 3 Months Warranty of Cjays The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test Welding is possible in our Workshop in Valkenswaard Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), functionality: fully functional, total height: 450 mm, total width: 240 mm, total length: 670 mm, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 200 A, welding current (min.): 15 A, welding current (max.): 300 A, Unused Lascentrum MIG 300 DP-3 Synergic Double Pulse MIG/MAG for steel, stainless steel and aluminium. Ideally suited for on-site work, general welding, medium-duty steel/stainless steel/aluminium structural work, and in the workshop. 15-300 AMP 400 Volt Synergic Puls / Double Pulse 2/4 Step / 4 Roller Drive Fixed Programs / Program Memory Stick Option Including: SB250 3 Meter Welding Torch Earth Cable 3 Meter 35mm² Electrode Cable Gas hose Manual (If available in the Packaging) Original packaging 3 Months Warranty The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test welding is available at our workshop in Valkenswaard. Dsdpfezqc Aajx Acwewb Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), Year of construction: 2017, operating hours: 494 h, functionality: fully functional, machine/vehicle number: 27026757, type of input current: three-phase, total height: 510 mm, total width: 300 mm, total length: 706 mm, input voltage: 400 V, ground cable length: 5,000 mm, overall weight: 100 kg, type of cooling: water, hose package length: 1,200 mm, electrical fuse: 35 A, open-circuit voltage: 73 V, welding current at 60% duty cycle: 360 A, welding current at 100% duty cycle: 320 A, input current: 26 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 400 A, input frequency: 60 Hz, Equipment: type plate available, Fronius TPS 400i Pulse MIG/MAG welding system – complete with accessories For sale: Fronius TPS 400i Pulse professional MIG/MAG welding system, complete with wire feeder, mobile stand, and a comprehensive set of accessories. The Fronius TPS 400i Pulse is a professional welding machine suitable for a wide range of MIG/MAG applications. The machine features pulse welding and the ability to record welding data (datalogging). This datalogging is a built-in function of the welding machine and is not a separate accessory. Included with the machine: - Fronius TPS 400i Pulse - Fronius wire feeder, without stand - Sturdy mobile stand for the power source - 1.2-meter intermediate cable pack, currently connected - 20-meter intermediate cable pack, supplied as extra - 8-meter Push/Pull welding torch - Wera torque screwdriver, for correctly tightening the push/pull wire feed rollers - Box with various wear parts, including contact tips, gas nozzles, and other accessories Dsdpfx Acezwhprewswb - Ground cable with welding clamp - Connecting cables and other cables/hoses - Other accessories as shown in the photos - Manual available digitally Versatile professional system The combination of the 1.2-meter intermediate cable pack, the supplied 20-meter intermediate cable pack, and the 8-meter Push/Pull torch makes this system highly versatile for welding aluminum, among other applications, and for larger structures or workpieces where the welding machine cannot be placed directly next to the workpiece, the set offers a great deal of flexibility. The built-in welding data recording/datalogging is of interest to professional users who value process monitoring, quality control, and traceability of welding work. The machine has been used and has normal signs of wear, but is in good and solid condition. Sold as a complete set as shown. Inspection and testing are possible by arrangement. Pick-up only, shipping not possible. A forklift is available.

Condition: used, Shielding Gas Welding Machine MIG-O-MAT Type U 405 Serial No. Year of manufacture 1991 Output 400 amps = 60% duty cycle 280 amps = 100% duty cycle Adjustment range 18 steps Torch hose length 5 meters Power supply 380 V, 50 Hz, 32 amp plug - Spot and interval welding function - 2-stroke and 4-stroke welding functions - Wire feed with 2-roller drive - Water-cooled - Shielding gas pressure regulator - Supplied with 1.2 mm welding wire Dimensions L x W x H: 1300 x 500 x 900 mm Djdpfeyy Dfqex Acwjwb Weight approx. 200 kg In good condition

Condition: refurbished (used), type of cooling: water, welding current (min.): 25 A, welding current (max.): 450 A, Second-hand Röwac PU450 Double Pulse MIG Refurbished, tested, serviced and ready for immediate use 3 Months Warranty Specifications: 25-450 AMP 400 Volt Pulse / Double Pulse Synergic Water-cooled 2/4 Step 4 Roller drive Gas pre flow / Gas post flow Dwedpozv I Nvjfx Acweb Start current / End current Fixed programs / Program memory Elektrode option Including: 4 Meter Welding torch, earth cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Why buy from us rather than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Insured shipping on pallets is of course possible! All prices are starting from £100. You can configure the devices with us. Dwodjvlwh Dspfx Acwob Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. It's best to call us. We'll discuss your application and give you an initial price estimate.