Used Merlo Telescopic Handlers for sale (60)

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 142 h, maximum speed: 40 km/h, Operating hours: 142, First registration: 16.01.2024 Maximum lifting capacity: 4,200 kg Maximum lift height: 7,000 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with pallet forks: 8,170 kg Total weight without pallet forks: 8,000 kg Engine: 4-cylinder Perkins 904J, 3.6 l displacement, water-cooled Power: 100 kW (136 HP) at 2,300 rpm Hydraulic reversing fan Stage V Diesel particulate filter, oxidation catalyst, and SCR catalytic converter with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive: Pump electronically controlled with variable output; Motor: variable displacement motor EPD PLUS including optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission: 2 gears, electrohydraulic control Vmax: 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: enclosed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Hodpfxopcht Ho Ag Uong Heating Front, roof, and rear window wipers Sunshade roller 4x1 electronic joystick with capacitive release including travel direction switch CS = hydropneumatic cab suspension Telescopic boom, 2-piece with electronic end position damping (Soft Stop) Attachment carrier quick-change system, type “ZM2”, hydraulically controllable from the cab Hydraulic steering 3 steering modes: all-wheel, front-wheel, crab Drive: permanent all-wheel drive Axles: front rigid, rear oscillating Brakes: servo-assisted disc brakes on all four drive shafts, automatically applied parking brake when engine is off Frame: high-strength steel construction Hydraulic system: variable output “LOAD SENSING” pump Hydraulic working flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V Battery: 100 Ah Alternator: 120 A Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement recognition, and overload shut-off Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer coupling, hydraulic reversing fan, radio pre-installation, work lights on the cab (2 front, 2 rear), preparation for auxiliary function on boom head, 2 hydraulic connections on boom head, load guard on attachment carrier, lighting for road travel, automatic battery main switch, electrical connection cable in telescopic boom, acoustic reverse alarm, lift cylinder support for safety Options: EU type approval as tractor/towing vehicle for 40 km/h including self-locking trailer hitch (30/32 mm pin), including trailer light connection Air conditioning Boom suspension (B.S.S.) LED work lights on the cab (2 front, 2 rear), 2 work lights on end of first boom section ASCS upgrade: monitor with all ASCS functions + ...

Condition: good (used), power: 88.26 kW (120.00 HP), Year of construction: 2015, Equipment: additional headlights, all wheel drive, cabin, differential lock, onboard computer, pallet forks, trailer coupling, Telehandler MERLO TF38.7-120 Year: 2015 According to meter: 8,752 hours Deutz 120 HP 40km/h, 2-speed hydrostatic drive 7.1 meter lift height 3.8 ton lifting capacity - incl. forks - hydraulic quick coupler - additional hydraulic circuit up to fork carrier - all-wheel drive - 3 steering modes - joystick control - cab with heater - lighting system with indicators - immediately ready for use - original paint - good tires - incl. CE certificate - incl. road registration B Sale price: €31,900,-- net Affordable delivery possible! Hedpfx Agjxztixj Ueng New bucket available at extra cost!

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), empty load weight: 12,500 kg, lifting height: 13,000 mm, Year of construction: 1997, operating hours: 4,103 h, number of cylinders: 4, load capacity: 3,000 kg, TECHNICAL DETAILS Lifting and Carrying Lifting height: 13,000 mm Lifting capacity: 3,000 kg Hnodpfjw Elf Ajx Ag Ujg MACHINE DETAILS Power: 83 kW Fuel type: Diesel Number of cylinders: 4 Drive: Wheel Unladen weight: 12,500 kg Payload: 3,000 kg Permissible total weight: 15,500 kg EQUIPMENT extendable mast

Condition: used, fuel type: diesel, operation weight: 12,800 kg, Year of construction: 2000, operating hours: 11,000 h, Equipment: pallet forks, standard shovel, Merlo Roto 30.16 EV telehandler Year of manufacture: 2000 11,000 operating hours 12,800 kg Lifting capacity: 3,000 kg 2x boom extension up to 16 m Quick coupler Hnjdpjxvri Hsfx Ag Ujg Forks, bucket, lifting hook and work platform with controls included Rotating upper carriage

Condition: good (used), Year of construction: 2022, Merlo P 40.17 telescopic handler/telescopic forklift rigid, 4t load capacity, used from 2021/2022, tare weight = 11,670kg Hnjdpsrzampofx Ag Uog

Condition: good (used), functionality: fully functional, Year of construction: 2006, load capacity: 3,400 kg, lifting height: 7,000 mm, load center: 500 mm, power: 75.02 kW (102.00 HP), motor manufacturer: Deutz, overall weight: 6,600 kg, total height: 2,475 mm, total length: 4,180 mm, total width: 2,230 mm, Equipment: CE marking, adjustable boom, all wheel drive, cabin, full service history, gripper hydraulics, head guard, lighting, pallet forks, retractable fork, sideshift, trailer coupling, For sale is a used Merlo P34.7 Plus telehandler, year of manufacture 2006, with a lifting capacity of 3,400 kg and a lifting height of approx. 7 m. The machine is in a condition appropriate for its age and is immediately ready for operation. Hedpjxg Idusfx Ag Ujng We strongly recommend inspecting the machine on site to get an accurate impression of its condition and features. A test drive is also possible! The sale is made under exclusion of any warranty and liability for material defects. All information has been provided to the best of our knowledge, but without guarantee for completeness, accuracy, or timeliness. Errors and prior sale excepted.

Condition: used, Year of construction: 2024, operating hours: 95 h, maximum speed: 40 km/h, Operating hours: 95, First registration: 15.01.2025 Hnedjuycgfepfx Ag Uog Basic Equipment / Technical Data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to tool carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg - Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversible fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive - Pump: electronically controlled with variable displacement - Motor: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral hydraulic oil HVI 46 - Transmission: 2 gears, electrohydraulically controlled - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap belt - ROPS/FOPS-certified - Heating - Front, roof and rear windshield wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector switch - CS = hydropneumatic cab suspension Telescopic Boom - 2-part telescopic boom with electronic end position damping (Soft Stop) Attachment - Quick coupling system type "ZM2", hydraulically controlled from the cab Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle fixed - Rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels, automatically acting parking brake when the engine is off Chassis - High-strength steel frame design Hydraulic System - Load Sensing pump with variable displacement - Work hydraulics flow rate: 150 l/min - Hydraulic fan flow rate: 46 l/min - Total flow rate: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stabilisation Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signal, attachment recognition, and overload shutoff Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo-assisted brake - Hydraulic oil cooler - Rear mounting plate for trailer hitch (AHK) - Hydraulic reversible fan - Radio pre-installation - Work lights on cab (2 front, 2 rear) - Preparation for additional function at boom head - 2 hydraulic connections at boom head - Load protection grate on tool carrier - Lighting for road use - Automatic battery main switch - Electric connection cable in boom - Acoustic warning signal when reversing - Boom support cylinder for securing Optional Equipment - EU approval as tractor 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection - Air conditioning - Boom suspension (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights at base of first boom section - ASC

Condition: ready for operation (used), Year of construction: 2013, Vehicle description Telescopic handler MERLO P32.6 PLUS Year: 2013 According to hour meter: 8,844 hours 3.2 t lifting capacity 6.4 m lifting height 74 kW Perkins engine 40 km/h, 2-speed hydrostatic - Incl. forks - Hydraulic quick coupler - Additional hydraulic circuit up to fork carriage - All-wheel drive Hodpfx Agsvkfrue Uong - 3 steering modes - Joystick control - Small but powerful machine for agriculture! - Original paint Sales price: €26,900 net Affordable delivery possible! New bucket or work platform available at extra cost!

Condition: like new (used), functionality: fully functional, power: 55.16 kW (75.00 HP), fuel type: diesel, overall weight: 9,100 kg, lifting height: 12,500 mm, tire size: 400/70-20, tire condition: 80 %, Year of construction: 2022, operating hours: 1,100 h, Equipment: additional headlights, air conditioning, cabin, hydraulics, onboard computer, pallet forks, soot filter, standard shovel, trailer coupling, Merlo 40.13 Telehandler - Year of manufacture: 2022 - Approx. 1,100 operating hours - 75 HP Deutz engine - Max. lifting capacity: 4 t - Max. lifting height: 12.5 m - Own weight: 9,300 kg - 2x hydraulic connections at boom head - Electrical connection cable at boom head - Acoustic signal when reversing - Hydraulic quick coupler type ZM2 - Hydraulic side shift in undercarriage - Level compensation - 2x front stabilizers - Central lubrication system without boom head - 1x combined grease nipple at boom head - LED work lights: 2x front, 2x rear - LED beacon - 3 steering modes - 20 km/h machine - Incl. bucket - Incl. pallet fork - Tyres: 400/70-20 Input errors and mistakes in this offer are expressly reserved. The decisive agreements are those specified in the order confirmation or purchase contract. Hedpfxowf Hn Sj Ag Ueng Further construction machinery and mixing plants on our website.

Condition: used, Year of construction: 2016, Lifting capacity 5500kg/8.60mtr. 500/70R24 30% 176l/min Hydraulics Air conditioning tinted / windows / Hnodjr Ii T Tspfx Ag Ujg

Condition: good (used), Year of construction: 2021, Merlo Roto 50.26 S telescopic handler/telescopic forklift rotatable, 4,950 kg load capacity, used from 03/2021, tare weight = 16,600 kg Hnsdpfx Agorzanbj Uog

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h Hodpfx Asx Dmgvjg Ujng EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Condition: used, power: 66 kW (89.73 HP), Year of construction: 2022, operating hours: 170 h, maximum speed: 20 km/h, Operating hours: 170 Maximum lifting capacity: 2,500 kg Maximum lift height: 4,800 mm Maximum outreach: 2,600 mm Length to attachment carrier: 3,320 mm Width: 1,540 mm Height: 1,975 mm Total weight with forks: 5,120 kg Total weight without forks: 4,950 kg Engine: Electric - zero emissions Power: 66 kW (90 HP) Maximum speed: 20 km/h Lead-acid battery: 48 V Nominal capacity: 960 Ah Cabin: Semi-open cabin ROPS/FOPS Heated seat Sun blind Roof wiper Digital display 4x1 electronic joystick with capacitive enable including travel direction switch 2-section telescopic boom Attachment carrier: Quick-change carrier type ZM2S Steering: Two rear steering wheels Drive: Permanent all-wheel drive Brake system: Negative electrohydraulic parking brake, regenerative braking system, oil-immersed front brakes Hydraulic system: Load-sensing variable displacement pump Working hydraulics capacity: 42 l/min Working pressure: 210 bar Flow-sharing control block Electrics: Charging voltage 220 / 400 V Charging time at 220 V: 9 hours Hedpfx Agjtxgqlo Uong Maximum operating time: 8 hours (depending on application) Tyres: AS 504 10.0/75-15.3 18 PR Standard equipment: - Gravity lowering of telescopic arm - 2 hydraulic connections at boom head - Road lighting - LED work lights on cabin (2 front, 2 rear) - Automatic battery isolator switch - Acoustic reverse travel warning - Boom cylinder support for safety - Certification for type approval at 20 km/h - External charger WALLBOX 16 A - 400 V Optional equipment: - Upper door section in glass (for closed cabin) - Cabin heating - Heated windscreen - 31x15.5-15" 12 PR TR315 BKT, agricultural tread (vehicle width increases to 1.70 m) Location: Municipality of Hellenthal

Condition: used, power: 103 kW (140.04 HP), fuel type: diesel, color: green, tire size: 17,5-25, Year of construction: 2010, operating hours: 11,738 h, machine/vehicle number: 384, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, Deutz engine Hsdpfx Aoqt Dwfeg Usng Quick change device Total weight 11,000 kg max. load capacity 5,500 kg Max. lifting height 8,600 mm max. outreach 4,600 mm Errors excepted

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,685 h, load capacity: 3,000 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, Equipment: all wheel drive, No UVV-relevant defects! Place of use: indoor, outdoor and off-road use TECHNICAL DETAILS Lifting height: 9.60 m Max. reach: 6.50 m Max. load capacity: 3,000 kg Load capacity at full reach: 1,000 kg Mast type: extendable Fuel type: diesel Engine: diesel MACHINE DETAILS Transport dimensions (L x W): 4.60 x 2.10 m Clearance height: 2.02 m Own weight: 7,100 kg EQUIPMENT - 4x4 all-wheel drive Hnodpov D Itbsfx Ag Uog - Off-road tires - All-wheel steering - Cabin with heating

Condition: good (used), Year of construction: 2021, Merlo Roto 50.21 telescopic handler/telescopic forklift rotatable, 4,950 kg load capacity, used from 2021, tare weight = 15,800 kg Hsdpfjr Drh Ssx Ag Usng

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler was serviced three months ago. During this maintenance, among other tasks, the slew ring bolts were replaced, and both machine and hydraulic oils were serviced. TECHNICAL DETAILS Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Lifting capacity at max. height: 1,500 kg Lifting capacity at max. outreach: 150 kg Slewing turret rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Hnjdpfexr Axdsx Ag Ujg Engine power: 107 kW / 145 HP Fuel tank: 150 l Performance Speed 1st gear: 16 km/h Speed 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrics System voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent four-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS approval Electronic joystick control Merlin control system Tac-Lock carriage Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent four-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch direction control Hydrostatic transmission Pneumatic seat Note: The winch (€4,000) and the platform (€1,000) can be purchased separately if required.

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2022, operating hours: 2,160 h, Operating hours: 2160, First registration: 24.05.2022 Year of manufacture: 2022 Approx. operating hours: 2,200 Max. lifting capacity: 3,300 kg Max. lift height: 6,600 mm Max. outreach: 3,500 mm Length to attachment carrier: 4,310 mm Width: 2,100 mm Height: 2,120 mm Total weight with forks: 6,500 kg Total weight without forks: 6,330 kg Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled Power: 85 kW (115 hp), 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive: Pump: electronically controlled with variable output Hjdpfsupq Tqjx Ag Usng Engine: variable displacement motor EPD TOP incl. with optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission 2-speed, electrohydraulically controlled Max speed 1st/2nd gear: 16 / 20 km/h; optionally 40 km/h Cab: Closed cab, split door 360° all-round visibility GRAMMER air-suspension seat with lap belt ROPS/FOPS certified Heater Front, roof, and rear wipers Sun blind 4x1 joystick (electronic, capacitive release) incl. travel direction switch Telescopic boom: 2-stage with electronic end position damping (Soft Stop) Attachment carrier quick-change system type "ZM2," hydraulically operated from cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle fixed, rear axle oscillating Brake system: Servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine stops Hydraulics: Pump with variable flow (LOAD SENSING) Working hydraulics flow: 125 l/min Hydraulic fan flow: 46 l/min Total flow: 171 l/min Working pressure: 210 bar Flow-sharing control block Electrics: 12 V system 100 Ah battery 120A alternator Stabilisation control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signals, attachment recognition and overload shutoff Optional equipment: Tires: 400/70-24 158A8 Rear hydraulic connection with separate control EU approval as tractor/agricultural tractor, 40 km/h Trailer hitch, height adjustable, self-locking, 30/32 mm pins, incl. connection for trailer lighting Air conditioning Boom suspension (B.S.S.) LED beacon on cab roof (approval responsibility of customer) LED work lights on cab (2 front, 2 rear) replacing standard halogen headlights 2 work lights at the end of the first boom section (base boom) ASCS upgrade: display with all ASCS functions + constant flow front Location: Molitor GbR

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C7004367, Year of construction: 2019, operating hours: 1,706 h, load capacity: 3,800 kg, lifting height: 13,800 mm, arm reach: 8,600 mm, Equipment: sideshift, TECHNICAL DETAILS Lifting height: max. 13.80 m Reach: max. 8.60 m Load capacity: max. 3,800 kg Load capacity at full reach: max. 800 kg Drive and engine Engine: diesel (Kubota engine) Drive: 4x4 all-wheel drive Steering: all-wheel steering Tires Tires (VR/VL, HR/HL): approx. 75% Type: off-road tires MACHINE DETAILS Transport dimensions (L x W): 5.24 x 2.22 m Clearance height: 2.44 m Own weight: 8,900 kg Operating hours: 1,706 h (as of January 20, 2025) Previous owner: first owner Visual condition: good Technical condition: good Place of use: inside, outside, Terrain Maintenance and inspections Last service: 11/2024 Last UVV inspection: 11/2024 UVV valid until: 11/2025 Condition: Without UVV-relevant defects EQUIPMENT - Tow bar - Heating - 4x4x4 drive - Kubota engine - Quick coupler Hodpfxjvr Tdzj Ag Ueng - Level control - Supports - Merlo sideshift - All-wheel steering - Cab with heating

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,074 h, maximum speed: 40 km/h, Operating hours: 1,074, First registration: 11.10.2022 Basic equipment/technical data: - Max. lifting capacity: 4,200 kg - Max. lift height: 7,000 mm - Max. outreach: 3,800 mm - Length to carriage: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine: - 4-cylinder Deutz TCD 3.6 engine, displacement 3.6 l, water-cooled - Output: 105 kW (143 hp) at 2,300 rpm - Hydraulic reversing fan - Emissions standard Stage V - Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Drive system: - Hydrostatic drive - Pump: electronically controlled with variable flow rate - Motor: variable displacement motor - EPD TOP incl. optional automatic speed increase - Mineral hydraulic oil HVI 46 Transmission: - 2-speed, electrohydraulically controlled - Max. speed: 16 / 20 km/h in 1st/2nd gear (optional 40 km/h) Cabin: - Fully enclosed cabin - Split door - 360-degree all-round visibility - GRAMMER air-suspended seat (V3611) with lap belt - ROPS/FOPS certified - Heating - Front, roof, and rear wipers - Sunblind - 4x1 joystick, electronically operated with capacitive release incl. direction switch Hnsdpfstu Sztex Ag Usg - CS = hydropneumatic cab suspension Telescopic boom: - 2-part telescopic boom with electronic end position damping (Soft Stop) - Attachment carrier quick coupling system Type 'ZM2', hydraulically operated from cabin Steering: - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive: - Permanent all-wheel drive Axles: - Front axle fixed - Rear axle oscillating Braking system: - Power-assisted disc brakes on all four drive shafts - Automatic parking brake on engine stop Chassis: - High-strength steel frame construction Hydraulics: - Load sensing pump with variable displacement - Work hydraulics flow rate: 150 l/min - Hydraulic fan flow rate: 46 l/min - Total flow rate: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics: - 12 V - Battery: 100 Ah - Alternator: 120 A Stabilisation control: - Simplified Merlo ASCS system (ASCS-light) with full electronic stability control, audiovisual warning, attachment recognition, and overload shut-off Tyres: - 460/70 R 24 Michelin XMCL Standard equipment: - Power-assisted brake - Hydraulic oil cooler - Rear plate for mounting tow hitch - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Boom head pre-installation for auxiliary functions - 2 hydraulic connections on boom head - Load protection grid on attachment carrier - Road lighting - Automatic battery disconnect switch - Electric cable in boom - Acoustic reverse alarm - Boom support for safety Optional equipment: - EU road homologation as tractor/agricultural tractor 40 km/h incl.: auto-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection. For compact and medium models, height-adjustable version recommended - Air conditioning - Boom vibration damping (B.S.S.) - LED beacon on cab roof (approval responsibility lies with ...)

Condition: excellent (used), fuel type: diesel, lifting height: 13,000 mm, Year of construction: 2017, operating hours: 2,371 h, Year of manufacture: 2017 Empty weight: 8.650 kg Carrying capacity: 3.800 kg GVW: 12.450 kg Chassis type: rigid Lifting capacity: 3.800 kg CE mark: yes Technical condition: very good Visual appearance: very good Hsdpfx Agox Higaj Usng

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 6,000 mm, Year of construction: 2022, operating hours: 2,498 h, General information Year of manufacture: 2022 Technical information Torque: 265 Nm Drive: Wheel Engine type: Kohler KDI2504TCR Empty weight: 5.400 kg Dimensions (LxBxH): 391 x 186 x 196 cm Functional Hsdpfxex S Dvgs Ag Usng Lifting capacity: 2.700 kg Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: Italy Condition CE type: CE Bucket and pallet forks

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,450 kg, total length: 4,510 mm, drive type: Diesel, construction width: 2,000 mm, Rigid telehandler Hnodpfx Agsxntnbj Ueg Mast type: Telescopic Technical condition: New Front tires: 400/70-20, field tread pattern Rear tires: 400/70-20, field tread pattern

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 6 h, load capacity: 3,400 kg, lifting height: 8,860 mm, fuel type: diesel, mast type: telescopic, construction height: 2,485 mm, empty load weight: 8,500 kg, total length: 5,440 mm, drive type: Diesel, construction width: 2,240 mm, Telescopic forklift rigid Mast type: Telescopic Technical condition: New Front tires size: 460/70 r 24 michelin xcml Hedpow Ir Insfx Ag Ujng Rear tires size: 460/70 r 24 michelin xcml

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,450 kg, total length: 4,510 mm, drive type: Diesel, construction width: 2,000 mm, Rigid telehandler Mast type: Telescopic Hnodpfx Agow Ir Ihj Usg Technical condition: New Front tires: 400/70-20, field tread pattern Rear tires: 400/70-20, field tread pattern