Used Maho Mh 600 W for sale (437)

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Kjdpfxsxf Ur Nj Aalsww

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW Kedpfxov Dxxne Aalsww tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: reconditioned (used), functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 380 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 63 rpm, quill stroke: 50 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 4 m/min, table width: 800 mm, table length: 360 mm, table load: 200 kg, overall weight: 1,600 kg, workpiece weight (max.): 200 kg, power: 5 kW (6.80 HP), year of last overhaul: 2024, Ladies and Gentlemen, We are selling a Maho MH500M universal milling machine, which stands out due to its extremely simple and convenient operation. For example, all feeds can be infinitely adjusted by potentiometer. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. Availability: on request Working range X: 500 mm Working range Y: 380 mm Working range Z: 350 mm Speed range of the main spindle: 63 - 4,000 min/-1 Gear stages: 2 Tool holder: SK 40 Tool clamping: Hydraulic Quill stroke: 50 mm Table variant: rigid Table clamping surface: 800 x 360 mm T-slots: 14H7 - 5 / 63 Max. table load: 200 kg Feed speed: 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ): 4 / 2 / 4 m/min Total power requirement: 5 kW Machine weight: approx. 1.6 t Space requirement: approx. 3.0 x 3.0 x 2.5 m Additional equipment and accessories: coolant device, work lamp, electrical supports, foot pedal for tool clamping (optional) Kwodpfx Asrnnf Nealow Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. Kodpfx Aov Sy Sfjaleww - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Kwsdpsyu Twkjfx Aalew Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,500 rpm, controller model: Heidenhain TNC 310, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 20-4500 rpm Kedpfxsywgtxs Aaljww MACHINE DETAILS Control: Heidenhain TNC 310 Dimensions & Weight Space requirements: approx. 2.15 x 2.00 x 2.50 m Machine weight: approx. 3 t EQUIPMENT Swivelling rotary table Documentation

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 400 mm y-travel 580 mm z-travel 460 mm Kwodpfx Asyv Ap Hoaljw Control Heidenhain iTNC 530 Additional information HSC Precision Machining Center HSC 55 linear NEW DMG Design Heidenhain iTNC530 3D Control SmarT.NC User Interface DMG ERGOLine® Control, 19" Screen HSC 55 linear 5-Axis Version Rotary Swivel Table Clamping Surface 400 x 400 mm Swivel Range A-Axis +10/-110°; C-Axis 360° Maximum Load Capacity 200 kg, Absolute Measuring Systems Including Drive Cooling for A and C Axes X = 450 mm, Y = 580 mm, Z = 460 mm 80 m/min Rapid Traverse Spindle Speed ??20 – 42,000 rpm For HSK-E50 Tool Holder according to DIN 69893 AC Main Drive with 13/10 kW (40%/100% ED) Tool magazine with 60 positions Chain magazine with double gripper Active cooling unit for main spindle and linear drives Active cooling unit for control cabinet Direct absolute measuring systems including purge air Coolant/air cooling switch Renishaw laser tool measurement for measuring tool length and diameter incl. calibration mandrel with tool holder 3D quickSET Toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations (only in conjunction with optional probe) PP 60 optical infrared probe Electronic handwheel Application Tuning Cycle (ATC) software Selection of the optimal machining mode for the current operation 20-position pallet tower storage and transfer station Pallet size: UPC 320x320mm Loading door and air supply at the worktable Pallet management via machine control Including UPC-P chuck Four-color indicator light Air blower through the spindle center, selectable via M-function and softkey Maintained air with low oil content Dust extraction for graphite Rotating viewing window Operating mode 4 Process monitoring in production Laminated safety glass window

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm Ksdpfxex S Rxnj Aaloww control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer Kjdpfxexcp R Us Aalsww - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, CNC controller: HEIDENHAIN iTNC530 X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360° (0,001°) A-axis degrees: +10° -110° Worktable Table dimensions mm: 400x400 Max. workpiece weight kg: 200 Spindle speed rpm: 42.000 Ksdoyv H I Hepfx Aaloww Tool holder: HSK-E50 Tool magazine slots: 60 Electronic Handwheel Infrared probe blowing air through spindle center selectable via M-function Signal lamp NC swivel rotary table 3D quickSET 20-position pallet tower storage and transfer station

Condition: ready for operation (used), Year of construction: 2009, operating hours: 35,295 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,200 mm, total width: 5,400 mm, table width: 900 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, product length (max.): 3,400 mm, swivel angle B-axis (min.): -29 °, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 80P duoBLOCK was manufactured in 2009. It features impressive axis travels with X-axis at 800 mm, Y-axis at 1050 mm, and Z-axis at 850 mm. The machine includes a robust table size of Ø 900 × 700 mm and a maximum workpiece weight capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 80P duoBLOCK vertical machining centre we have for sale. Contact us for further details. • Rotary axes: B-axis (tilting head) -30° to +180°; C-axis (rotary table) 360° continuous Ksdpfjyvhfmjx Aaljww • Table size: approx. Ø 900 × 700 mm • Max. workpiece weight: approx. 1400–1800 kg • Spindle type: Vertical milling spindle • Coolant through spindle (CTS): yes • CE compliant • Condition: Very good working condition; full service history available Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale DECKEL MAHO DMU 100 T machining centre – 5 continuous axes: Description: Kwjdjyc Tzlepfx Aalsw CNC vertical machining centre with 5 simultaneous axes, designed for complex precision parts machining (mould making, aerospace, automotive, etc.). Technical specifications: - Model: Deckel Maho DMU 100 T - CNC control: Heidenhain iTNC 530 - Axes: X / Y / Z + B rotation + A rotation (simultaneous 5-axis machining) Axis travels: - X-axis: approx. 1050–1150 mm - Y-axis: approx. 710–750 mm - Z-axis: approx. 710 mm Spindle and tooling: - Spindle speed: Up to 18,000 rpm - Spindle power: approx. 28 kW - Tool mounting: SK 40 - Tool magazine: 32 positions Table and capacity: - Type: Integrated NC rotary table - Dimensions: approx. 800 x 800 mm - Max load: 500–800 kg Dimensions and weight: - Machine weight: approx. 9,500–10,000 kg - Dimensions: approx. 3500 x 2500 x 3000 mm (L x W x H) I remain at your disposal for any further information.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 79,500 h, functionality: fully functional, machine/vehicle number: 11710000713, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 600 kg, The machine spindle was replaced according to DMG in 2022. A measurement protocol for the machine is included! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 700 mm Travel Z-axis: 700 mm Spindle speed: 18,000 rpm Spindle torque: 110 / 84 Nm Spindle power: 34 / 28 kW Tool holder: SK 40 Tool changer: 180 positions Pallet size: 500 x 500 mm Max. workpiece weight: 600 kg Rapid traverse: 60 m/min MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Total connected load: 68 kVA Dimensions & Weight Space requirements: 9.5 x 7.5 x 3.4 m Machine weight: 10.5 t Operating Hours Spindle hours: 79,500 h Power-on hours: 112,000 h EQUIPMENT NC rotary table RS 10 pallet rotary storage, total of 12 pallet stations iTNC operator panel for the loading station ICS 40 bar (production package) Through-spindle air blast BA 4 2/4 hydraulic clamping for worktable and set-up station BLUM laser (prepared) Oil mist separator TS 649 probe Mechanical tool breakage detection SDS (Spindle Diagnostic System) Rinse gun Electronic handwheel Kwedpfx Aaeyvp Dkjlew Chip conveyor

Year of construction: 2001, condition: used, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 500 mm table clamping surface:: 400 x 300 mm table load: 50 kg semi-automatic operated: LASERSOFT 3D Kodpfxjikbtno Aaljww laser capacity: 100 W total power requirement: 27 kVA weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3,5 x 2,8 m CNC engraving/texturing/labeling/contouring-laser maschine, approx. 9.000h "machine on", approx. 5.500h "laser on" *

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Manufacturer: DECKEL MAHO Kwedjyk S Hpopfx Aalow Model: DMU 70VL Year of manufacture: 2001

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 500 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 6,000 rpm Spindle taper: ISO 40 Number of tool changer positions: 24 MACHINE DETAILS Total power requirement: 35 kW Dimensions & Weight Required space (L x W x H): approx. 3,600 x 3,000 x 2,925 mm Kwodpfjyv Axzox Aalow Machine weight: approx. 5,200 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Kjdoyuzg Hopfx Aaloww Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: good (used), Please read the technical specifications carefully. If the machine is of interest to you as an investment, we kindly ask that you provide full identification, including a correct phone number and email address, when requesting an offer. DECKEL Milling Machine Toolroom Milling Machine DMU 35 M 3 x 2 axes CNC Milling Machine With SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Travel distances (X/Y/Z): 350 x 240 x 340 mm Spindle speed, stepless: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Kodpfxexz Rdae Aalsww Clamping bolt: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55 / 80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145 / 485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary axis range: 360 degrees Swivel range: degrees Total power consumption: kVA Weight: approx. 1,750 kg Technical data subject to change! Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox stages - Fully enclosed guard cabin with sliding door - Swiveling control panel - Coolant nozzles at the vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine light - Serial RS232C interface, LAN (RJ45) The machine is perfectly suited for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. Its outstanding universal capability is thanks to the additional manually operated rotary/swivel table, which allows 5-sided machining. Condition: Good to very good, from a vocational training center, see photos. Can be inspected under power.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,663 h, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,500 mm, overall weight: 10,600 kg, number of axes: 4, This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine. Additional equipment • 4 Pallets 400 x 400 included with machine, indexed 4th axis by 1 degree • Workpiece probe • Internal cooling • Large coolant tank with automatically coated filter paper Machine Benefits Technical Machine Benefits • Table size: 400 x 400 mm • Tool magazine: 60 positions Extra Information Machine still under power Kwsdpfxjytumdj Aaljw Dimensions Machine Depth 6000 mm Technical Specification Through-spindle Coolant Yes

Condition: like new (used), Year of construction: 2001, operating hours: 10,356 h, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain TNC 430, workpiece weight (max.): 5,000 kg, total height: 4,200 mm, total length: 7,900 mm, total width: 8,800 mm, spindle speed (min.): 10,000 rpm, Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Kjdpfx Asyq Rpcealjww Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Under power: 10356 Spindle Working: 6223 Basic machine dimensions / weight Length mm: 7900 Width mm: 8800 Height mm: 4200

Condition: like new (used), Year of construction: 2006, operating hours: 51,775 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 4,000 kg, total height: 3,500 mm, total length: 7,500 mm, total width: 7,700 mm, table length: 1,500 mm, overall weight: 35,000 kg, spindle speed (min.): 10,000 rpm, Year of construction: 2006 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1600 Y-axis travel mm: 1250 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Table dimensions mm: Ø1500x1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40/100%ED) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 250 With occupied neighboring places mm: 130 Max. Tool Length mm: 650 Max tool weight kg: 30 Chip-to-chip time s: 6 Equipment Chip conveyor Infrared probe Kwsdpfxjyq Rm Is Aalew Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Machine running times Under power: 98398 Spindle Working: 51775 Rated power kVA: 96.2 Basic machine dimensions / weight Length mm: 7500 Width mm: 7700 Height mm: 3500 Weight kg: 35000

Condition: good (used), Year of construction: 2008, 1 DECKEL MAHO 160 P duo BLOCK machining center CNC HEID. 530 year 2008 X 1600 Y 1250 Z 1000 Spindle 12,000 rpm - ISO 40 high pressure through the spindle table diameter 1500 x 1250 EROWA PC 210 palletizing system Kodoyvptrjpfx Aaljww ATC with 60 automated positions CAN BE SEEN IN OPERATION IN FRANCE

Condition: excellent (used), Year of construction: 1996, operating hours: 9,700 h, DMG Vertical Machining Center Model: DMU 50 V Year of manufacture: 1996 5 axis Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Kodpfoyvzq Nsx Aaljww Spindle taper: BT 40 Spindle speed : 8,000 rpm Tools in magazine: 24 piece Control: Deckel Maho Mill Plus Spindle hours: 9700 Interface: RS-232 C 30 tool holders

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° Kwjdjym Sdyepfx Aalew B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Kwodpfxjym R Tge Aalsw Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Width: 4500mm Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!