Used Maho 1000 C for sale (429)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,396 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 14,000 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details. • Condition: Used (good) • Operating hours: 24396 h • Electrical: • Nominal power: 39 kVA • Voltage: 400 V • Frequency: 50 Hz • Secondary voltage: 230 V • Control voltage: 24 V • Current: 63 A • Current (max): 56 A • Rapid traverse: • X: 60 m/min • Y: 40 m/min • Z: 40 m/min • Feed Force (X, Y, Z-Axis - 40% ED): 7000 N • Feed Speed (X, Y, Z-Axis): max. 40 m/min • Rapid Traverse (Y, Z-Axis): 40 m/min • Rapid Traverse (X-Axis): 60 m/min • Ball Screw Diameter/Pitch (X, Y-Axis): 40 x 15 mm • Position Accuracy (Y, Z-Axis Standard - Indirect Measurement System): 0.020 mm • Position Accuracy (X-Axis Standard - Direct Measurement System): 0.005 mm • Position Accuracy (Y, Z-Axis Option - Direct Measurement System): 0.008 mm • Resolution: 0.001 mm • Input Resolution (X, Y, Z-Axis): 0.001 mm • Main Drive Power (40% / 100% ED): 18 / 14 kW • Main Drive Torque (40% / 100% ED): 95 / 75 Nm • Front and Rear Spindle Bearing Diameter: No specification • Spindle Speed: Infinitely programmable from 0 to 12,000 min⁻¹ Hedpfx Ajyz Tkfsicsfk • Setup Operation Spindle Speed: 0 to 800 min⁻¹ • Program Check with Manual Intervention Spindle Speed: 0 to 5,000 min⁻¹ • Motor Type: Direct drive via speed-controlled asynchronous motor with liquid cooling • Maximum Torque (S1 - 100% ED): 70 Nm • Maximum Torque (S6 - 40% ED): 100 Nm • Maximum Motor Power (S1 - 100% ED): 13 kW • Maximum Motor Power (S6 - 40% ED): 19 kW • Included Equipment: Chip Conveyor (Spiral type) • Chip Conveyor Discharge Height: 380 mm • On this machine, compressed air can be activated through the spindle using an M-code command

Condition: used, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 3,150 rpm, CNC Milling Machine Brand: Maho Hsdpfxszlfu Uj Aicefk Model: 500C Control System: Philips CNC 432 Table Dimensions: 650 × 320 mm X-axis Travel: 500 mm Y-axis Travel: 400 mm Z-axis Travel: 300 mm Spindle Speed: 20 – 3150 rpm Digital Readout

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Hfodpfjzmry Tjx Aicek Control cabinet cooler from Rittal Operating manuals

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 29130000062, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed length X-axis: 90,000 mm, feed length Y-axis: 90,000 mm, feed length Z-axis: 90,000 mm, nominal power (apparent): 73 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,600 mm, total length: 4,000 mm, total width: 3,500 mm, table width: 650 mm, table length: 950 mm, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, input current: 125 A, DECKEL MAHO DMC 75 V LINEAR CNC Vertical Machining Center - Frequency: 50/60 Hz - Tool holder: HSK 63 - Table with six slots and a GARANT zero-point clamping plate, plate dimensions: 360 x 360 mm - Including 3D measuring probe - Including chip conveyor Hfjdpfxozld Nqs Aicek Note: The machine can be transported on a truck up to 3000 mm wide! Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: used, Year of construction: 2007, x-travel 1350 mm y-travel 560 mm z-travel 510 mm Control Heidenhain iTNC 530 total power requirement 13 kW weight of the machine ca. 5 t Hfedpfx Ajzlb Dfoicsk

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Hsdpev Sy Sfefx Aicofk Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,421 h, functionality: fully functional, machine/vehicle number: 29100009074, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece diameter (max.): 140 mm, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travel range X-axis: 640 mm Travel range Y-axis: 600 mm Travel range Z-axis: 500 mm Clamping area length: 850 mm Clamping area width: 600 mm T-slots: DIN 650-14 Loading height, top edge of table: 850 mm Table load max.: 600 kg Spindle manufacturer: Franz Kessler GmbH Speed: 1,600 - 4,700 / 4,700 - 16,000 rpm Number of magazine slots: 30 Slot coding: Fixed slot coding Load weight max.: 90 kg Chip-to-chip time without free travel logic t3/t2: 6.8 s Chip-to-chip time without free travel logic t1 (30): 7.9 s Chip-to-chip time with free travel logic t3/t2: 8.3 s Chip-to-chip time with free travel logic t1 (30): 9.3 s TOOLS AND TOOL MAGAZINE Diameter, standard tool max.: 100 mm Diameter, special tool with free neighboring slots max.: 140 mm Tool length max.: 300 mm Tool weight max.: 6 kg FEED Feed force X, Y, and Z axes: 7,000 N Feed rate X, Y, and Z axes max.: 40 m/min Rapid traverse speed Y and Z axes: 40 m/min Rapid traverse speed X axis: 70 m/min Ball screw diameter/pitch: 40/15 mm POSITIONING SYSTEMS Positioning accuracy, direct measuring system X-axis: 0.008 mm Positioning accuracy, indirect measuring system Y and Z axes: 0.020 mm Positioning accuracy, direct measuring system (option): 0.010 mm Resolution: 0.001 mm Input fineness X, Y, and Z axes: 0.001 mm MACHINE DETAILS Operating hours: 11,421 h Power-on time: 32,054 h Hfjdpozpxqdjfx Aicjk Connected power: 33 kVA Nominal current max.: 58 A Fuse rating: 63 A Mains voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 230 V Control voltage: 24 V COOLANT AND CHIP MANAGEMENT Chip box container capacity: 150 l Pump capacity, external coolant supply: 50 l/min Pressure, external coolant supply: 2.0 bar Pump capacity, chip flushing: 90 l/min Pressure, chip flushing: 1.9 bar Pump capacity, flushing gun: 50 l/min Pressure, flushing gun: 2.0 bar

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 2,000 kg, The machine is running without any problems and will now be idle for a period of time as it is no longer needed. Travel ranges: X: approx. 485–500 mm Y: approx. 385–400 mm Z: approx. 380–400 mm Hodpfxozqufte Aicefk Spindle: SK 40 DECKEL Dialog 2 / Contour 2 control system Table: universal, swiveling and rotating

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -comes from a MAHO CNC machining center, type: MC 600 Hodpfxjb A Nu Tj Aicjfk -for: max. 48 recordings -Recording: SK40 -Dimensions: 1630/H450 mm -Empty weight: 325 kg

Condition: good (used), CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C Hfodpfx Aieq T T I Iecjk -Type: 28A1 -IDENT NO.: 27.71 231 -Dimensions: 400/280/H75 mm -Weight: 1.6 kg

Condition: used, Control panel, touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel, Touch Panel -Manufacturer: NFI Electronics, touch panel from CNC milling machine MAHO MH 800C Hjdoq T T Nwopfx Aicefk -Type: 1435-18-22 -Total dimensions: 340/310/H30 mm -Weight: 0.8 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C Hedpsq T T Npsfx Aicofk -Type: KDS 1.1-50-300-W1 MOD 4/1X108-091 -Quantity: 1x servo controller available -Dimension: 490/110/H390 mm -Weight: 15 kg

Condition: used, Control cabinet - cooling device, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling device, control cabinet cooler -Manufacturer: Siemens, heat exchanger control cabinet cooling device from milling machine MAHO MH 800C -Type: 8ME 7874-DR -Voltage: 230V -Power consumption: 170W -Dimensions: 415/130/H725 mm -Weight: 14.2 kg Hfjdpjq T T Nzefx Aicek

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: MAHO, Tool changer from CNC machining center MAHO MH 800C -for: max. 24 shots -Recording: SK -Dimensions: 1200/410/H480 mm Hjdpfx Aioq Tvp Uecefk -Town weight: 106 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C Hodpsq T T I Defx Aicefk -Type: TDM 3.2-20-300-WO MOD 14/1X023-094 -Quantity: 2x servo controllers available -Dimension: 320/70/H390 mm -Weight: 7.7 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C Hfedpjq T T Ndsfx Aicek -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg

Condition: good (used), CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Philips, control rack from CNC milling machine MAHO MH 800C -PCB: 4022 224 7062 -Card: 4022 224 3433 -Graphic Modem: 4022 224 3451 -Cent Proc: 4022 226 2331 -Drive Mod.: 4022 226 3645 / 4022 226 3690 -LS/LS board: 4022 226 3680 -Inp Outp Mod: 4022 226 3531 2 pieces -Power supply: 4022 226 2270 PE 1870/03 -Individual components: see photos -Price/sale: complete -Dimensions: 375/310/H340 mm Hfodpfx Ajq T T Nhsicek -Weight: 13.4 kg

Condition: used, Pressure reducer, pressure regulator, bladder accumulator, high pressure bladder accumulator, hydraulic accumulator, pressure accumulator, membrane accumulator -Manufacturer: Hydac, pressure accumulator from CNC machining center MAHO MH 800C -Type: SBO140-1.4E1/112U-140FT080 -Operating pressure: max. 140 bar -Quantity: 2x pressure storage available -Price per piece -Dimensions: Ø 145 x 205 mm -Weight: 3.7 kg Hfedpfx Aeq T T Ntjicsk

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,110 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, rotational speed (max.): 28,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 28,000 rpm, operating hours of spindle: 10,000 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous machining center Linear motors Hfsdpfxszmxmts Aicok 28,000 rpm spindle with HSK 63A, recently replaced Rotary table, 950mm diameter Wireless workpiece probe MH Laser presetter for tool inspection Optical scales Remote handwheel Chip conveyor NO coolant supply through the spindle Complete with manuals Disconnection scheduled for August 25th Removal scheduled for August 26th

Condition: used, Year of construction: 2001, x-travel 630 mm y-travel 500 mm z-travel 500 mm Control CNC total power requirement 13 kW weight of the machine ca. 4,5 t dimensions of the machine ca. m Hsdpfx Aist Ii Iwjcsfk

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading Hfsdpfx Aiov Td Elocsk We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 Hsdpfx Aot Hw Trjicjfk _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 560 mm z-travel 560 mm Control SIEMENS 840 C total power requirement 12 kW weight of the machine ca. 10000 kg Hsdpfxot Hw R Re Aicofk dimensions of the machine ca. m

Condition: used, Year of construction: 2008, x-travel 1000 mm Hodpfx Asxcp R Ujicjfk y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Machine is in good working condition. Hodpfx Aozk U Unoicofk