Used Liebherr Lr 621 B for sale (228)

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Ncodpjym Nbcjfx Agwjp Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: Ncodpfxsx R U Hmj Agwep SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: used, Year of construction: 2006, operating hours: 14,000 h, Equipment: all wheel drive, Liebherr A 314 Litronic year 2006 approx. 14,000 operating hours 16 tons German machine dozer blade mono boom air conditioning all services carried out by Liebherr Tel: We are happy to assist with financing or leasing EU sales: net price upon presentation of company documents and VAT/tax number VAT deposit €2,000 we speek english govorimo srpsko-hrvatski Ncsdpfjw Tg A Rex Agwep Our services for you: - Export license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station Tel:

Condition: used, Year of construction: 2014, operating hours: 11,000 h, Equipment: all wheel drive, Liebherr 918 year of manufacture: 2014 11,000 operating hours Liku Fix 1 bucket / hydraulic universal grab ZSA GERMAN MACHINE from first owner Phone: We are happy to assist with your financing or leasing EU sales: net price upon presentation of company documents and VAT number VAT deposit €2,000 We speak English Nsdjx Hrdhopfx Agwjcp We speak Serbo-Croatian Our service for you: - Transit plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau station Phone:

Condition: used, Year of construction: 2016, operating hours: 5,574 h, Liebherr L556 wheel loader, year of manufacture: 2016, operating hours: 5,574 h, bucket, onboard weighing system with printer, central lubrication system, rear view camera, engine: Liebherr [165 kW / 225 hp], weight: 18,400 kg, immediately operational. We are happy to offer you a leasing or financing solution upon request. Mr. Mihm (phone) will be pleased to assist you. For more information, please visit our website. Subject to errors and prior sale! Ncsdeytmlxspfx Agwjp = Further Information = Please contact Tobias Ebert for more details.

Condition: good (used), fuel type: diesel, Year of construction: 2014, operating hours: 9,535 h, Year of manufacture: 2014 Drive: Wheel CE mark: yes Technical condition: good Visual appearance: good Serial number: 074209 Nodpfxsx Dzdvs Agwecp Please contact Ferdinand Pater for more information

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Nedpfx Aevkpu Hsgwscp Counter holder milling mandrel is missing *

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 8 (10) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW Njdpsyv Ipfjfx Agwecp weight of the machine ca. 25,00 t

Condition: used, Year of construction: 2010, operating hours: 8,000 h, Orderly machine Liebherr L 514 Z Stereo Stereo Loader (articulated steering + rear axle steering – extremely manoeuvrable!!!) Year of manufacture: 2010 Original operating hours: 8000 Chassis number: VATZ 1115CZB025518 Tyres 17.5 x 25 at 40% (with nails + screws – but still airtight!) Power: 72 kW (98 HP) Ncjdpfxjyqn Enj Agwep Total weight: 10,500 kg Air conditioning 3rd hydraulic control circuit for auxiliary equipment such as high-tip bucket, bucket with clamp, silage block cutter, etc. 2 work lights on the cab roof, front Battery isolator switch, comfort driver's seat with suspension Warning beacon at rear of cab (top) Road registration Hydrostatic travel drive with 2 speeds Width: 2400 mm Net price including hydraulic quick coupler and 1.6 cubic metre bucket: €36,500 Additional equipment available at extra cost: 5-ton pallet fork from €2,190 High-tip bucket from €3,250 Volume bucket All prices are net ex stock plus 19% VAT or for export! We are happy to offer transport to your location. Sale exclusively to commercial customers or for export. Sold as seen, in its current condition. No warranty or guarantee. The specified mileage or operating hours are as read from the odometer/hour meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided does not represent warranted characteristics. The description and the details provided serve only for general identification of the vehicle and do not constitute a guarantee as defined by sales law. The information does not claim to be complete. The specifications/descriptions and photos are non-binding and do not constitute warranted characteristics. Only the arrangements in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typographical or data transfer errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We are also happy to take your vehicle in part exchange. For further questions, please feel free to contact us. For our international customers, we handle all customs and export documents for smooth overseas delivery.

Condition: new, Year of construction: 2017, Liebherr 566 XPower Wheel Loader • 13,309 operating hours • Own weight 23.9 tons • Travel speed 40 km/h • Engine power 200 kW (272 HP) • Transport height 3,590 mm • Tire size 26.5 R25 (50%) • Outer turning radius 7,340 mm • Bucket width 3,000 mm • Bucket capacity 4.2 m³ • Automatic central lubrication • Integrated weighing system • Overpressure cabin system Condition: New Ncsdjyk U Dqopfx Agwep Year of manufacture: 2017

Condition: used, lifting height: 48,000 mm, Year of construction: 2011, Drivetrain Drive: Wheel Weights Empty weight: 36.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Nedpoyg A Uijfx Agwecp Tyre brand: - Carrier engine: - Upper engine: - Upper hours: 7666 h Counterweight: 0 Transport dimensions (LxWxH): 13.72x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 17,000 h, Equipment: ABS, all wheel drive, Liebherr L 576 2plus2 Year of manufacture 2011 17,000 hours Scale Central lubrication system Air conditioning GERMAN MACHINE, first owner Weight approx. 27.5 tons Bucket approx. 4.5 cubic meters Tel: We are happy to take care of your financing or leasing. EU sale: net upon presentation of company documents and tax/VAT number. VAT deposit 2,000 € We speak English. We speak Srpsko-Hrvatski. Our services for you: Ncodpfjyiifdox Agwjp - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station Tel:

Condition: used, Year of construction: 2019, operating hours: 3,229 h, Liebherr L 538 Z 2plus1 Z-lift frame – as new – Regularly serviced by Liebherr. Delivered to customer on 29/03/2019 * 1st service at 485 hours on 30/03/2020 * 2nd service at 928 hours on 08/01/2021 * 3rd service at 1425 hours on 27/08/2021 * 4th service at 2520 hours on 20/03/2023 Chassis No. VATZ1559JZB53233 Year of manufacture: 2019 Operating hours: approx. 3,229 Lift frame with Z-kinematics – earthmoving 4-cylinder inline engine 111 kW/151 HP, water-cooled, turbocharged, emission stage 4 Length 7,200 mm, machine width: 2,500 mm, height: 3,280 mm Hydrostatic drive with 3-speed transmission Special equipment: * Ride vibration damping BSS – lift frame damping * Central lubrication system, Liebherr factory installed * Automatic climate control (maintains set temperature automatically) * Steel lighting bracket instead of plastic * Access aid in front of windscreen for easier cleaning * Premium touchscreen display * Opening window in cab door * "Comfort" driver’s seat with pneumatic suspension, seat heating, and headrest * Adjustable steering column * Comfort radio with hands-free kit * Automatic bucket return * 3rd hydraulic circuit for attachments such as high-tip bucket, sweeper, grapple bucket, etc. * 2 rear LED work lights on cab roof * 4 front LED work lights on cab roof * Engine air intake with pre-separator for preliminary air cleaning * Programmable lift and lowering speed * Tilt cylinder rod protection * Automatic fueling pump with auto shut-off * Road approval Tyres: 20.5 x 25 L3, front axle 2 x 50% Ncsdeyrzn Eopfx Agwop * Tyres: 20.5 x 25 L3, rear axle 2 x 50% (The tyres shown in the photos are fitted only for transport) Also available with agricultural tread – see photo no. or earthmover tread – see photo no. * Automatic self-locking differentials, 45% locking value, on both axles Net price with fixed 2.5 m³ bucket: €93,500 net plus VAT Optional equipment at extra cost: * Quick coupler incl. hydraulic preinstallation: €3,550 * High-tip bucket 3–4 m³ * 4-in-1 bucket (grapple/levelling bucket) 2 m³: €3,950 * High-volume bucket 5 m³: €3,990 * Pallet forks, 5 tons from €2,190 (8 ton option available) Available with on-board scale at extra cost: * Pfreundt WK 60: €5,900 Note: The brochure specification only partially matches this machine: – This machine has emission stage IV, brochure shows stage V. All prices are net export – with valid number and papers. Sale only to businesses or for export. Sale in current condition as the machine is. No guarantee or warranty. The stated odometer or operating hours readings are from the respective counter; no guarantee for accuracy. Subject to prior sale. This vehicle description does not constitute a binding offer and the information provided does not constitute guaranteed features. Description and information serve solely for vehicle identification and are not a warranty.

Condition: used, Year of construction: 2020, Equipment: all wheel drive, Liebherr L 538 P 2plus1 Mast: high-lift Year of manufacture: 2020 Operating hours: approx. 13,566 All servicing carried out by Liebherr and documented in the system up to 12,549 hrs as of 16.09.2025. 4-cylinder inline engine, 111 kW / 155 hp, water-cooled with turbocharging, emissions Stage IV Operating weight approx. 14,500 kg | Permissible total weight: 17,000 kg Hydrostatic drive with 3-speed gearbox Rear collision protection (reinforced bumper / heavier counterweight) Automatic central lubrication system, factory-installed by Liebherr Automatic climate control—keeps the set temperature automatically 3rd and 4th hydraulic control circuits for attachments, e.g., high-tip bucket, grapple bucket, etc. Ride control (BSS) — mast damping Access aid in front of windscreen for easier cleaning Lint screen to prevent radiator contamination Wide-mesh radiator core for easier radiator cleaning Reversing fan for cleaning radiators (reverse mode) Air filter with pre-cleaner (TopAIR) for pre-filtering intake air Premium display with touchscreen “Comfort” driver’s seat with pneumatic suspension and seat heating Left armrest Steering column adjustable in height and tilt Comfort radio with hands-free function Steel front headlight carrier instead of plastic 2 LED work lights at rear cab roof 2 LED work lights at front cab roof Sun blinds at front and rear Adaptive work lighting incl. additional headlamp on front frame Mast with end position damping Programmable lift and lower automation Tilt cylinder with piston rod guard Automatic engine shutdown after 5 minutes at idle Defects: reversing camera not working, windscreen cracked · Speed limit 20 km/h can be adjusted via Liebherr! Tyres: 20.5 x 25 VA (front axle) 2x 30% * 20.5 x 25 HA (rear axle) 2x 30% Automatic self-locking differentials, 45% locking ratio on both axles Ncjdpfxeyrznxs Agwop Price with quick coupler and standard bucket: €59,900 Available at extra cost: High-tip bucket from 3 to 4.5 cubic meters 4-in-1 bucket (grab/levelling bucket) 2 m³ €3,950 Bucket with hydraulic clamp (grapple bucket) €4,350 High-capacity bucket 5 m³ €3,990 Pallet forks 5 tonnes from €2,190 (optionally for 8 t as well) * Also available with on-board weighing system at additional cost: * Pfreundt WK 50 €3,900 * Pfreundt WK 60 * Prices include installation All prices net for export | Domestic sales subject to 19% VAT. We are happy to arrange transport to your location. Sale only to businesses or for export. Sale as-is, in current condition as seen. No warranty or guarantee. The specified mileage or operating hours are as read from the odometer/hour meter, we do not guarantee their accuracy! Subject to prior sale. The vehicle description is non-binding and should not be regarded as a guarantee of specific features. All details are for general identification purposes only and do not constitute a warranty under sales law. Details are not guaranteed to be complete. All data/descriptions and images are non-binding and do not represent warranted characteristics. Only the terms set out in the order confirmation and invoice apply.

Condition: used, New: No Ncodpfx Asykzrhsgwjp Please contact us for further information.

Condition: used, power: 190 kW (258.33 HP), Year of construction: 2013, operating hours: 16,426 h, Empty weight: 1 kg Nodpfoyn Nd Tsx Agwocp Please contact Emal Jaweed for more information

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 25,000 kg, wheel width: 3,000 mm, feed length X-axis: 1,000 mm, LIEBHERR L3002 CNC Internal and External Gear Hobber Built 1982, Modernized 2006 CNC SIEMENS 840 D. Max Wheel diameter 3,000 mm. Ncedpswdmy Ejfx Agwep Max helical angle 45° Internal and external Head. 44/50 kW.

Condition: used, functionality: fully functional, power: 44 kW (59.82 HP), fuel type: diesel, operation weight: 6,900 kg, Year of construction: 1995, operating hours: 2,700 h, Liebherr L508 / FUG 93 wheel loader Year of manufacture: 1995 2,700 operating hours Ncjdpfx Aowxtnrsgwsp Approx. 6,900 kg 44 kW Deutz 4-cylinder engine 3rd hydraulic circuit 25 km/h road approval Transport dimensions: 5.85 x 2.0 x 2.85 m

Condition: used, functionality: fully functional, power: 150 kW (203.94 HP), empty load weight: 36,000 kg, Year of construction: 2007, operating hours: 10,000 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, Liebherr R934 C HDS Crawler Excavator Year of manufacture: 2007 10,000 operating hours Approx. 36,000 kg 150 kW Liebherr engine, 4 cylinders OQ 70/55 SW fully hydraulic quick coupler All hydraulic lines installed Extended monoblock boom Nsdpjxq A Dkjfx Agwecp Air conditioning Central lubrication system 140 cm digging bucket

Condition: used, Year of construction: 2016, operating hours: 17,628 h, Weighing system, quick coupler, bucket, fork, Very well-maintained machine, good tires, Nodpfx Ageyuym Ejwecp Previously used by a German company (concrete plant)

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Control SINUMERIK 840 D Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min diameter of hob 160 mm cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm 10.000 mm/min tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l Ncjdpjyt Rvhjfx Agwop coolant capacity 780 l Counterholder movement 540 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m for the following processes: axial hobbing, individual part milling, Worm wheel milling, roofing, deburring; NC tailstock

Condition: excellent (used), power: 120 kW (163.15 HP), operation weight: 20,500 kg, tire condition: 35 %, Year of construction: 2016, operating hours: 11,405 h, Equipment: air conditioning, Liebherr A920 Litronic year 2016 operation hours 11.405 hrs ROPS Airco Radio Ncodpexgtdtefx Agwsp Back drive camera Hyd. 2 piece boom stick 2,60 meter all hydr. lines (hammer-, gripper, scissor-) quick coupler SW48 Likufix Central lubrication Hydr. adjustable bucket – width 2,00 meter tyres: 10.00-20 approx 30-40% good blade support engine with 120kW CE Transport : 9.2x2.75x3.35m Operation weight: 20,5 to.

Condition: used, Year of construction: 1981, max. wheel diameter 36 mm gear width 36 mm max. module 10 total power requirement 12 kW weight of the machine ca. 11,2 t Ncedpsyi Hwyofx Agwjp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 15,080 h, Liebherr LH30. Year: 2015. Hours: 15,090. Industrial boom 6.80 m. Industrial stick 5 m with front cylinder. Four outriggers. Solid tires. CE certificate. Good condition. Ncodpfxeya Iade Agwjp

Condition: used, Year of construction: 2016, Equipment: all wheel drive, Liebherr L 538 Z 2plus1 Top condition, original paint Year of manufacture: 2016 VIN: VATZ1559KZB044515 Operating hours: 14,665 Machine handover on 19.01.2017 All services performed by Liebherr and documented. Last service at Liebherr on 20.06.2024 at 14,138 hours 4-cylinder inline engine, water-cooled with turbocharging Emission Stage IV, 155 HP Hydrostatic drive with 3-speed transmission, speed limited to 20 km/h, up to 40 km/h possible (currently 36 km/h) Air conditioning!!!! * Automatic central lubrication system (factory-installed by Liebherr) * Rear area monitoring with camera (function not tested!) * Ride control (boom suspension) * Steel lamp brackets instead of plastic * Fuel pre-filter * Climbing aid for easier cleaning of the front windscreen * Opening window in driver’s door * Premium touchscreen display * “Comfort” driver’s seat with pneumatic suspension (with seat heating) * Liebherr control lever (joystick) * Adjustable steering column * 4 working lights on the front cab roof * 2 working lights on the rear cab roof * Automatic bucket return * Reversible fan (for blowing out the radiator package) * Fluff filter in front of radiator package to prevent contamination * Pre-separator for engine intake air (TOP-AIR) * Beacon light preparation rear cab center * Audible reverse warning system (buzzer) * Radio preparation * Road approval possible!! Tyres 20.5 x 25 L3 – front axle 2 x 30% Tyres 20.5 x 25 L3 – rear axle 2 x 30% Ncedpfxjyqn Hro Agwjp Net price with fixed 2.5 cubic meter bucket: €44,900 Available for extra charge: • Hydraulic quick coupler: €3,550 • High-volume bucket 4 cubic meters: €4,500 • Pallet fork 5 or 8 tons from €2,190 Available optionally with scale, e.g. used Pfreundt WK50 - WK60 scale from €3,900 All prices + 19% VAT or for export. Sale only to business customers or for export. Sold as seen, in as-is condition. No warranty or guarantee. The stated kilometer or operating hour readings are taken from the meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer; the information provided is not to be considered guaranteed features. The description and information are for general vehicle identification only and do not represent a warranty in the sense of purchase law. The information does not claim to be complete. The details/descriptions and images are non-binding and not guaranteed features. Only the specifications in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typing or data transmission errors. The seller has not inspected the machine. Equipment must be checked separately.