Used Liebherr L 506 for sale (229)

Condition: used, mileage: 101,064 km, Year of construction: 2017, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 50.760 kg Functional Lifting capacity: 70.000 kg Identification Serial number: 060 676 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Michellin Carrier engine: - Upper engine: - Upper hours: 8815 h Lhodpfotr Ibyox Aaled Counterweight: 14500 Transport dimensions (LxWxH): 12.51x2.75x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Lhodpfxjx Ezyvo Aalsd Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: used, mileage: 8,168 km, power: 330 kW (448.67 HP), first registration: 06/2021, fuel type: diesel, overall weight: 48,000 kg, axle configuration: > 3 axles, gearing type: automatic, total width: 275 mm, total height: 4,000 mm, Year of construction: 2021, Liebherr MK 88-4.1E * Year of manufacture: 2021 * Operating hours: 17 * Mileage: 8,168 km * Max. lifting capacity at maximum outreach: 2,200 kg * Maximum outreach: m (max.) Ledpfjyr Uu Sex Aaljhd * Maximum lifting capacity: 8,000 kg * Hook height: 59.10 m (jib at steep angle °) * Slewing radius: 3.55 m * Travel motor: 6-cylinder diesel engine * Travel motor/make: Liebherr * Travel motor/power: 3 kW * Number of axles: 4 * Drive/steering: 8 x 6 x 8 * Travel speed: 80.00 km/h * Operating weight: 48.00 t * Additional ballast: 2.0 t Further details and additional images available on request. This description does not constitute a binding offer and may contain errors; no guarantee for the accuracy of all information. Please also visit our website at

Condition: used, functionality: fully functional, fuel type: diesel, color: original, overall weight: 400,000 kg, tire condition: 75 %, drive condition: 75 %, axle configuration: 8x8, brakes: engine braking, suspension: hydraulics, Year of construction: 2000, operating hours: 25,000 h, machine/vehicle number: LHM400, Equipment: additional headlights, all wheel drive, cabin, crane, hydraulics, onboard computer, dismantled Liebherr LHM 400 - parts ready Ledpfx Aajx N Twhjlshd

Condition: used, Year of construction: 2014, operating hours: 10,000 h, Liebherr R924 LC Compact Litronic/Hydraulic Excavator Operating Hours: 10,030 h Weight: 26,300 kg Engine Manufacturer: Liebherr (short-tail) Engine Power: 120 kW Air Conditioning Engine Type: D934S * Sales Consultant Information * + * APPOINTMENT REQUIRED FOR TEST DRIVE OR INSPECTION * + Lhedpoyrlylsfx Aalod * Trade-in and financing possible. * Input errors cannot be ruled out. * Please verify the equipment on site + input errors + subject to prior sale.

Condition: used, mileage: 185,652 km, power: 240 kW (326.31 HP), first registration: 10/2011, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 8x6, fuel: diesel, color: yellow, driver cabin: other, gearing type: other, emission class: none, suspension: other, total length: 10,400 mm, Year of construction: 2011, construction height: 3,900 mm, This used Liebherr LTC 1045-3.1 is a powerful truck with crane superstructure, ideal for commercial applications. The crane was manufactured in 2011 and has a mileage of 185,652 km. Powered by a robust diesel 6x6 drive, the truck delivers 240 kW (326 hp) and a displacement of 7,201 cc, ensuring reliable performance and high efficiency. The vehicle is accident-free and features a yellow paint finish. It comes equipped with a green emissions sticker (Euro 4), allowing operation in urban environments. The crane supports various loading options and is perfectly suited for construction sites or other specialized operations. A Certificate of Conformity (CoC) is available, and all technical data has been determined to the best of our knowledge. Viewings are possible Monday to Friday and on Saturdays. If interested or for further questions, please contact us by phone or email. Registration service and delivery within Germany are available at an additional cost. Lsdpfx Aasxvfa Seljhd Sale to commercial customers only (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), first registration: 07/2012, fuel type: diesel, overall weight: 21,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 03/2028, color: green, gearing type: mechanical, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, Internal vehicle number: G300402_Concrete German vehicle Located at our yard in Kaufungen - Kassel, available immediately More information at * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Liebherr concrete mixer 10 m³ Year of manufacture: 2012 Gross vehicle weight: 32,000 kg Unladen weight: 6,530 kg Errors excepted We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC COMMERCIAL VEHICLES GMBH Lsdpsxy Umcefx Aalehd We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: used, fuel type: diesel, first registration: 05/2018, Year of construction: 2017, operating hours: 12,770 h, Used Liebherr L576 X Power wheel loader – total weight 29,000 kg – operating hours 12,776 – engine 215 kW – speed 40 km/h – axle load distribution 15,500 kg – = More information = Unladen weight: 29,000 kg Reference number: 93 For more information, please contact Miguel Cubas. Lodpfx Aoyl Tr Aealehd = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: good (used), power: 100 kW (135.96 HP), fuel type: diesel, Year of construction: 2014, operating hours: 13,725 h, General information Year of manufacture: 2014 Field of application: Construction Technical information Number of cylinders: 4 Empty weight: 23.000 kg Dimensions (LxBxH): 865 x 255 x 316 cm Functional Mast length: 9 m Condition Lhsdpfxjycl S No Aaljd Technical condition: good Visual appearance: good Other information Emissions class: Stage IIIA Additional information Please contact Ferdinand Pater for more information

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. Ljdpfxoym Nfbo Aalehd The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Ledpfx Aaoym Nbcjlshd Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: good (used), fuel type: diesel, Year of construction: 2014, operating hours: 9,535 h, Year of manufacture: 2014 Drive: Wheel CE mark: yes Lsdpfxjx Dzdvj Aalshd Technical condition: good Visual appearance: good Serial number: 074209 Please contact Ferdinand Pater for more information

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 8 (10) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW Lhodpfxoyv Ipfj Aalsd spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: used, Year of construction: 1963, Technical details: Ledpfxjvkpu He Aalshd max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: used, lifting height: 48,000 mm, Year of construction: 2011, Drivetrain Drive: Wheel Weights Empty weight: 36.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Carrier engine: - Upper engine: - Upper hours: 7666 h Counterweight: 0 Transport dimensions (LxWxH): 13.72x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information Lsdpfxoyg A Uie Aalshd

Condition: used, Year of construction: 2023, operating hours: 1,200 h, Equipment: ABS, all wheel drive, Liebherr 504 Compact Year: 2023 Only 1,254 hours Tyres in very good condition Quick coupler Forks + bucket Delivery possible Immediately available ----We gladly arrange financing or leasing EU sale: net price with company documents and VAT ID VAT deposit: €2,000 We speak English We speak Serbo-Croatian Our service for you: - Export license plates - Export documents and EUR1 Lodpfxjylglis Aalohd - Worldwide transport - Accommodation available - Transfer from Munich Airport or Passau station

Condition: used, Year of construction: 2019, operating hours: 3,229 h, Liebherr L 538 Z 2plus1 Z-lift frame – as new – Regularly serviced by Liebherr. Delivered to customer on 29/03/2019 * 1st service at 485 hours on 30/03/2020 * 2nd service at 928 hours on 08/01/2021 * 3rd service at 1425 hours on 27/08/2021 * 4th service at 2520 hours on 20/03/2023 Chassis No. VATZ1559JZB53233 Year of manufacture: 2019 Operating hours: approx. 3,229 Lift frame with Z-kinematics – earthmoving 4-cylinder inline engine 111 kW/151 HP, water-cooled, turbocharged, emission stage 4 Length 7,200 mm, machine width: 2,500 mm, height: 3,280 mm Hydrostatic drive with 3-speed transmission Special equipment: * Ride vibration damping BSS – lift frame damping * Central lubrication system, Liebherr factory installed * Automatic climate control (maintains set temperature automatically) * Steel lighting bracket instead of plastic * Access aid in front of windscreen for easier cleaning * Premium touchscreen display * Opening window in cab door * "Comfort" driver’s seat with pneumatic suspension, seat heating, and headrest * Adjustable steering column * Comfort radio with hands-free kit * Automatic bucket return * 3rd hydraulic circuit for attachments such as high-tip bucket, sweeper, grapple bucket, etc. * 2 rear LED work lights on cab roof * 4 front LED work lights on cab roof * Engine air intake with pre-separator for preliminary air cleaning * Programmable lift and lowering speed * Tilt cylinder rod protection * Automatic fueling pump with auto shut-off Lsdpfx Aasyrzn Ejlohd * Road approval Tyres: 20.5 x 25 L3, front axle 2 x 50% * Tyres: 20.5 x 25 L3, rear axle 2 x 50% (The tyres shown in the photos are fitted only for transport) Also available with agricultural tread – see photo no. or earthmover tread – see photo no. * Automatic self-locking differentials, 45% locking value, on both axles Net price with fixed 2.5 m³ bucket: €93,500 net plus VAT Optional equipment at extra cost: * Quick coupler incl. hydraulic preinstallation: €3,550 * High-tip bucket 3–4 m³ * 4-in-1 bucket (grapple/levelling bucket) 2 m³: €3,950 * High-volume bucket 5 m³: €3,990 * Pallet forks, 5 tons from €2,190 (8 ton option available) Available with on-board scale at extra cost: * Pfreundt WK 60: €5,900 Note: The brochure specification only partially matches this machine: – This machine has emission stage IV, brochure shows stage V. All prices are net export – with valid number and papers. Sale only to businesses or for export. Sale in current condition as the machine is. No guarantee or warranty. The stated odometer or operating hours readings are from the respective counter; no guarantee for accuracy. Subject to prior sale. This vehicle description does not constitute a binding offer and the information provided does not constitute guaranteed features. Description and information serve solely for vehicle identification and are not a warranty.

Condition: excellent (used), power: 221 kW (300.48 HP), fuel type: diesel, color: other, mast type: telescopic, Year of construction: 2018, operating hours: 7,499 h, Equipment: air conditioning, Year of manufacture: 2018 Drive: Track Empty weight: 50.500 kg Engine type: Liebherr D936 Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Front View Camera - Hammer/sorting function - Liftable cabin - Radio Bluetooth - Rotation function - Work lamp(s) = Remarks = Drivetrain Lhsdpfsw I Htfox Aaljd Internship / Tier: Stage IV / Tier IV final General Country of production: France Condition CE type: CE Liebherr R946 with 27 meter cosben telescopic arm, Standard excavator equipment with hydraulic quick coupler, 2 x digging bucket and hydraulic tilting bucket, Hydraulically lifting cabin, Cameras, CE & Complete documentation available.

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 25,000 kg, wheel width: 3,000 mm, feed length X-axis: 1,000 mm, LIEBHERR L3002 CNC Internal and External Gear Hobber Built 1982, Modernized 2006 CNC SIEMENS 840 D. Max Wheel diameter 3,000 mm. Lsdpfxewdmy Ee Aalshd Max helical angle 45° Internal and external Head. 44/50 kW.

Condition: used, Year of construction: 2001, machine/vehicle number: 630-8394, Power: 210 kW, operating hours: approx. 9050 h, with additional boom, type: LO4651B, serial no.: 3001335 Lhodpfxjyf R A Eo Aaled

Condition: used, Year of construction: 1997, machine/vehicle number: 9792370, Power: 160 hp, max. machine weight: 27,700 kg, with loading bucket, working width: 2,350 mm Ljdpfxsyf R Eyo Aalohd

Condition: used, Year of construction: 2015, operating hours: 9,900 h, * Liebherr R 922 LC crawler excavator * Year of manufacture: 2015 * 9900 hours * 22,100 kg * 105 kW Liebherr engine * Oilquick OQ 70/55 fully hydraulic quick coupler * Air conditioning * Central lubrication system Lsdpfoyq A Htsx Aaljhd * Camera * 3 m transport width * All lines * New service

Condition: used, functionality: fully functional, power: 72 kW (97.89 HP), overall weight: 10,000 kg, Year of construction: 1999, operating hours: 13,000 h, Liebherr L514 Stereo wheel loader Ledsw Tlzfjpfx Aalehd Year of manufacture: 1999 13,000 operating hours 72 kW diesel engine approx. 10,000 kg 20 km/h Fork + bucket Hydraulic quick coupler Transport dimensions: 6.90 x 2.49 x 3.10 m

Condition: used, functionality: fully functional, power: 92 kW (125.09 HP), fuel type: diesel, operation weight: 22,000 kg, Year of construction: 2001, Equipment: air conditioning, Liebherr R904 HDSL Litronic tracked excavator Year of manufacture: 2001 14,000 operating hours 92 kW Liebherr engine Quick coupler Air conditioning Hydraulic narrow bucket Ljdpexyy Thofx Aaljhd Undercarriage width: 2.80 m All hydraulic lines present

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Control SINUMERIK 840 D Lodpfx Aasyt Rvhsljhd Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min diameter of hob 160 mm cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm 10.000 mm/min tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l coolant capacity 780 l Counterholder movement 540 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m for the following processes: axial hobbing, individual part milling, Worm wheel milling, roofing, deburring; NC tailstock