Used Kaercher Bd 50 50 for sale (86)

Condition: new, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 123 kg, warranty duration: 24 months, temperature: 80 °C, The HDS 8/18-4C Classic model focuses on structural refinement compared to its predecessor, the HDS 8/18-4M. The pump and boiler design have been improved, making this the most advanced version of the hot water model currently available. Its balanced construction allows for single-person operation and transport. The brass pump head and automatic pressure reduction system extend the service life of the unit. A large water filter protects the pump from any contaminants present in the water. Product Benefits: A reliable crankshaft pump and water-cooled motor ensure maximum efficiency and long-lasting operation. The open design allows for easy access to all necessary components. A sturdy steel tubular frame ensures maximum protection and easy transport, for example, by crane on the construction site. Integrated crane hooks and large, puncture-proof wheels facilitate transport to and from the construction site. The ECO mode allows you to optimize fuel consumption (up to 20%). The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from any contaminants present in the water. Technical Specifications: Condition: NEW Model: HDS 8/18-4C CLASSIC Manufacturer: KARCHER Country of Production: Germany Series: Professional Thread Type: KARCHER !EasyLock Series Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 400 - 800 Working Pressure (bar/MPa): 30 - 180 Maximum Pressure (bar/MPa): 235 Water Heating Range (°C): ~80 Connected Power (kW): 5.5 Power Cable (m): 5 Weight (kg): 123 Fuel Tank (l): 30 Dimensions (L x W x H) (mm): 1075 x 722 x 915 Equipment: Pressure Gun: Karcher Professional High-Pressure Hose: Karcher Professional – 10 m, Lance: Karcher Professional 1050 mm Nozzle: POWER Karcher Professional Pressure Nozzle Key Features: Bwodjwkq I Hepfx Ap Iew Mobility: The unit is equipped with large, puncture-proof wheels that allow safe maneuvering on uneven surfaces. Construction: Brass pump and 4-pole, cooled, low-speed motor. A pressure reducing valve after the unit is switched off ensures the longest service life and high operating parameters. Easy Transport: Integrated crane hooks facilitate transport of the unit on the construction site.

Condition: new, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, overall weight: 206 kg, warranty duration: 24 months, temperature: 155 °C, Technical specifications: Current type (Ph/V/Hz): 3 / 400 / 50 Flow rate (l/h): 600 - 1300 Working pressure (bar): 30 - 200 Temperature (°C): 80 - max. 155 Full load heating oil or gas consumption (kg/h): 9.5 Eco!efficiency heating oil consumption (kg/h): 7.6 Connected load (kW): 9.5 Connection cable (m): 5 Fuel tank (l): 25 Weight with accessories (kg): 206 Dimensions (L × W × H) (mm): 1330 x 750 x 1060 Scope of delivery: Hand spray gun: EASY!Force Advanced High-pressure hose length: 10 m High-pressure hose type: Longlife High-pressure hose specifications: DN 8, 400 bar Spray lance: 1050 mm Power nozzle Servo Control Features: Pressure shut-off Option for dual-spray lance operation Pole reversible plug (3-pole) Soft damping system (SDS) 2 detergent tanks Dry-run protection Operational reliability: An easily accessible water filter protects the pump from particles in the water. Safety valves, low-water protection, and fuel safety devices ensure the machine's availability. The soft damping system (SDS) compensates for vibrations and pressure peaks in the high-pressure system. Accessory storage directly on the machine: All accessories can be stored directly on the machine. There are two hooks for the suction hose and power cable. Spacious storage compartment, e.g., for detergent, gloves, or tools. Detergent dosing: Easy switching between detergent tanks 1 and 2. Precise detergent dosing with rinse function. Bsdpswglr Sofx Ap Ijww Mobility concept: Jogger-style design with large, rubber-tired wheels and a swivel caster. Integrated tipping tray for effortless transport over steps. Push handles for easy transport and maneuverability. Simple controls: One switch for all device functions.

Condition: new, functionality: fully functional, empty load weight: 115 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, KARCHER HG 64 HEATER TECHNICAL DATA: Model: HG 64 Manufacturer: KARCHER Catalog number: 1.030-510.0 Type: Hot water generator Country of manufacture: Germany Series: Professional Condition: NEW Power supply type (Ph/V/Hz): 1 / 230 / 50 Connected load (kW): 0.3 Inlet temperature (max): 80°C Minimum inlet volume: 400 l/h Water pumping capacity (l/h): 400-1300 Bsdsxykwwepfx Ap Ieww Safety valve operating pressure (max): 220 bar Hot water operating temperature (max): 95°C Burner power: 64 kW Fuel oil consumption (max): 5.9 kg/h Fuel tank: 20 L Fuel type: EL heating oil or diesel Operating weight: 115 kg Dimensions (L x W x H) (mm): 880 x 680 x 860 ADVANTAGES OF THE KARCHER HG 64: Robust and durable device - High-performance burner manufactured using "Made in Germany" technology. Proven Kärcher safety technology guarantees protection for the device and user. Increased cleaning performance thanks to the use of hot water - Shorter cleaning times and lower labor costs. More effective removal of oils, fats, and grease. Effective germ removal and protection of delicate surfaces. Exceptionally easy maintenance - Easy access to all parts requiring service and maintenance. Integrated fuel filter and removable fuel tank for cleaning. KARCHER HG 64 KIT EQUIPMENT: Karcher Classic gun – M22 thread Karcher 1050 mm spray lance 10 m hose – DN8 – 250 bar – 100°C – M22/M22 Connecting hose (high pressure washer – water heater): 3 m – DN8 – 315 bar – 60°C

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 59 kg, warranty duration: 6 months, COLD WATER PRESSURE WASHER KARCHER HD 6/16 ST-H New accessories Brass, durable head The device has undergone a general, meticulous renovation, the operating parts have been replaced with new ones, new ceramic pistons, new valves, new seals, new bearings and many other new parts Stationary high-pressure devices without water heating with exceptionally compact dimensions Possibility to hang the washer on the wall You are buying exactly the washer you see in the pictures, other models are available on our other auctions to which we cordially invite you TECHNICAL DATA: Power supply (~/V/Hz): 3 / 400 / 50 Pressing capacity (l / h): 600 Working pressure (bar / MPa): 160 / 16 Maximum pressure (bar / MPa): 200 / 20 Bedpfxsv S U Nrs Ap Isww Connection power (kW): 6.3 Fuse (A): 16 Weight (kg): 59 EQUIPMENT: Adjustable nozzle (new) 10 meters of reinforced hose (new) Stainless steel pressure lance (new) German, durable pressure gun (new) GEKA water filter and connectors - free

Condition: new, functionality: fully functional, operating pressure: 170 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, warranty duration: 24 months, temperature: 155 °C, The HDS 9/17-4CXA FARMER is one of the most powerful hot water pressure washers in the mid-range and also impresses with its sophisticated ergonomics and high user-friendliness. Its 4-pole electric motor, robust 3-piston axial pump with ceramic pistons, and economical eco!efficiency mode ensure maximum performance and reliable, economical operation. Many other features and performance details are also impressive, such as the optimized burner technology, detergent tank, convenient mobility concept, comprehensive safety technology, simple operation with a single switch, and clever accessory storage options. Technical Specifications: Condition: NEW Model: HDS 9/17-4 CXA FARMER Manufacturer: KARCHER Country of Production: Germany Series: Professional Condition: NEW Thread Type: KARCHER !EasyLock Series Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 290-900 Operating Pressure (bar): 30 - 170 Maximum Pressure (bar): 210 Fuel Consumption (kg/h): 5.6 Connected Power (kW): 6.5 Power Cable (m): 5 Weight with Packaging (kg): 129.8 Dimensions (L x W x H) (mm): 1060 x 650 x 920 Included: Automatic hose reel with 20m DN8, 400bar, 155°C hose Hand Spray Gun: EASY!Force Advanced with Servo Control Spray lance: 1050 mm Power nozzle Equipment: Detergent tank: 15L ANTI!Twist Externally fillable tanks for detergent, limescale protection, and fuel Control panel with illuminated indicator Pressure cut-off Automatic hose reel: The integrated original automatic reel allows for quick and easy rewinding of the hose. Bwjdjw Rz R Dopfx Ap Iew High efficiency: Eco!efficiency mode – economical and environmentally friendly, even during longer use. Reduces fuel consumption and CO₂ emissions by 20 percent. Detergent dosing: Precise detergent dosing with rinse function. Large tank opening with filling chute. Mobility concept: Jogger principle with large, rubber-tired wheels and a swivel caster. Integrated tipping trough for effortless transport over steps. Push handles for easy transport and maneuverability. Simple controls: Intuitive operation thanks to a large, single-button selector switch.

Condition: new, operating pressure: 210 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, overall weight: 160 kg, warranty duration: 24 months, temperature: 155 °C, TECHNICAL DATA OF THE KARCHER HDS 10/21-4MXA WASHER: Model: HDS 10/21-4MXA Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Bsdpfov Tbbdex Ap Ijww Power cable (m): 5 Weight (kg): 173 Dimensions (L x W x H) (mm): 1330 x 750 x 1210 EQUIPMENT OF THE KARCHER HDS 10/21-4 MXA WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 315BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 20m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) The set is equipped with an integrated, automatic pressure hose reel that significantly improves work comfort Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. A standard EASY!Force Advance high-pressure gun with a rotating lance, a 20m high-pressure hose on the reel, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Condition: new, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 157 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 11/18-4 S ANNIVERSARY EDITION WASHER: Model: KARCHER HDS 11/18-4 S ANNIVERSARY EDITION Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW (waster factory packed) Type: HOT WATER Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Bedov Tm A Hepfx Ap Ioww Pumping capacity (l/h): 550-1100 Working pressure (bar/MPa): 180 / 18 Maximum pressure (bar/MPa): 210 / 21 Fuel consumption (kg/h): 6.5 / 5.2 Connection power (kW): 7 Power cable (m): 5 Fuel tank (l): 25 Weight with packaging (kg): 157.7 Dimensions (L x W x H) (mm): 1330 x 750 x 1060 EQUIPMENT OF THE KARCHER HDS 11/18-4 S ANNIVERSARY EDITION WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional 10M, DN8, 400BAR - !EasyLock / !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Power nozzle with a 25° flat stream. Flat high-pressure stream with high surface efficiency and good dirt loosening force. RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort. Large wheels with rubber tires and ergonomic push handles make transporting the machine much easier. Built-in storage for a wide range of accessories. Includes 2 hooks for the suction hose and power cable. Large storage for cleaning agents, gloves, tools, etc. As standard, the EASY!Force high-pressure gun with a rotating lance, 10m high-pressure hose and power nozzle. EASY!Force technology reduces the force needed to hold the gun trigger to zero. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the service life of all pump components on the high-pressure side. The device also has the EASY!Lock equipment mounting system that allows changing equipment 5x faster than the traditional thread system. A well-thought-out operating concept with an intuitive control panel ensures easy operation The device is completely new and factory-packed.

Condition: new, operating pressure: 160 bar, high-pressure hose length: 15,000 mm, input voltage: 400 V, overall weight: 111 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 7/16 CXA WASHER: Model: HDS 7/16 CXA Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 310 - 660 Working pressure (bar/MPa): 30 - 160 Maximum pressure (bar/MPa): 160 Maximum water temperature (°C): 80 Connection power (kW): 4.4 Power cable (m): 5 Bwodpfx Apev Tmx Is Ijw Fuel tank (l): 15 Weight (kg): 126 Dimensions (length x width x height) (mm): 1260 x 650 x 920 EQUIPMENT OF THE KARCHER HDS 7/16 CXA WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Ultra Guard HD 15M series, DN6, 250BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 15m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC Automatic hose reel ensures safe operation and convenient storage of the 15-meter Ultra Guard high-pressure hose with Teflon® coating eco!efficiency mode - economical and environmentally friendly, even during longer periods of use - Reduces fuel consumption and CO₂ emissions by 20%. Easily accessible water filter protects the pump from impurities in the water. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the life of all pump components on the high-pressure side. Built-in funnel for filling the cleaning agent prevents accidental spillage of chemicals. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows 5x faster equipment changes than a traditional thread system. The device is completely new and factory-packed

Condition: new, operating pressure: 210 bar, high-pressure hose length: 10,000 mm, overall weight: 160 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 10/21-4 M WASHER: Model: HDS 10/21-4 M Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Bwsdpfx Asv Tci Njp Ijw Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Power cable (m): 5 Weight (kg): 160 Dimensions (length x width x height) (mm): 1330 x 750 x 1060 EQUIPMENT OF THE KARCHER HDS 10/21-4 M WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High pressure hose: Karcher Professional - Longlife series 10M, DN8, 400BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. As standard, the EASY!Force Advance high-pressure gun with a rotating lance, a 10m high-pressure hose, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Condition: new, functionality: fully functional, empty load weight: 105 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, Technical Data: Condition: NEW Catalog Number: 1.030-500.0 Power Type (Ph/V/Hz): 1 / 230 / 50 Connected Load (kW): 0.3 Inlet Temperature (max.): 50°C Bwodpsxtc Rcofx Ap Iew Inlet Flow Rate (min.): 400 l/h Water Flow Rate (l/h): 400-1000 Safety Valve Operating Pressure (max.): 200 bar Hot Water Operating Temperature (max.): 95°C Burner Output: 43 kW Heating Oil Consumption (max.): 3.5 kg/h Fuel Tank: 20 L Fuel: Heating Oil EL or Diesel Operating Weight: 105 kg Length x Width x Height (mm): 880 x 680 x 860 Scope of Delivery: Classic Hand Spray Gun - M22 Thread Spray Lance: 1050 mm Hose: 10 m - DN8 - 250 bar - 100°C - M22/M22 Hose (connection between high-pressure cleaner and hot water generator) - 3 m - DN8 - 315 bar - 60°C Durable unit: - The robust frame provides protection during continuous and intensive use. - All parts requiring maintenance are easily accessible. - Integrated fuel filter and the option to remove the fuel tank for cleaning.

Condition: new, working width: 400 mm, area performance: 400 m²/h, overall weight: 35 kg, water tank capacity: 10 l, KARCHER BR 40/10 C ANNIVERSARY EDITION SCRUBBERS TECHNICAL DATA: Model: BR 40/10 C ANNIVERSARY EDITION Manufacturer: KARCHER Catalog number: 1.783-343.0 Type: Compact scrubber Country of manufacture: Germany Series: Professional Number of brushes in the set (pcs): 2 Drive type: Mains powered Brush working width (mm): 400 Working / vacuuming width (mm): 400 Water tank: clean / dirty (l): 10 / 10 Theoretical area performance (m²/h): 400 Practical area performance (m²/h): 300 Brush rotation speed (rpm): 1100 Water consumption (l/min): 1 Sound pressure level (dB(A)): max. 75 Voltage (V / Hz): 220 – 240 / 50 Weight without accessories (kg): 35.5 Dimensions (L × W × H) (mm): 520 × 470 × 1150 KARCHER BR 40/10 C ANNIVERSARY EDITION EQUIPMENT: Bwjdpjxzfavsfx Ap Isw 2 x Standard cylindrical brush 2 x Hard cylindrical brush 2 x Transport wheel 2 x Straight squeegee (rubber bands) ADDITIONAL FEATURES: Two-tank system 230V mains power supply Variable brush pressure WHY CHOOSE KARCHER BR 40/10 C ANNIVERSARY EDITION KARCHER BR 40/10 C ANNIVERSARY EDITION SCRUBBERS? Celebrating Kärcher's 90th anniversary, the BR 40/10 C Anniversary Edition scrubber in black is a flexible option for a variety of applications. It scrubs and vacuums quietly in both directions. It features a foldable push handle and removable tanks, which are easy to transport thanks to the locking carry handle. The brushes and squeegees can be easily changed in seconds without any tools. The Anniversary Edition set also includes two orange double-bristled brushes.

Condition: new, functionality: fully functional, machine/vehicle number: 1.286-960.0, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, The HD 10/25-4 S Plus cold water high-pressure cleaner is ideal for ergonomic and user-friendly operation. With the Kärcher EASY!Force Advanced trigger gun, it can be operated comfortably without holding the gun. Pressure and water flow can be adjusted using the Servo Control regulator between the lance and trigger gun. The pressure reduction allows for quick response to sensitive surfaces – without changing the nozzle. In addition, the Vibrasoft rotor nozzle significantly reduces vibrations on the spray lance. Assistance systems and an LED status display simplify operation. Technical Specifications: Bodpfexpf Hxjx Ap Ieww Condition: NEW Catalog Number: 1.286-960.0 Current Type (Ph/V/Hz): 3 / 400 / 50 Flow Rate (l/h): 500-1000 Working Pressure (bar): 80 - 250 Maximum Pressure (bar): 280 Inlet Temperature: max. 60°C Power Rating (kW): 8.8 Connection Cable (m): 5 Weight (with accessories) (kg): 70.3 Dimensions (L × W × H) (mm): 607 x 518 x 1063 Included: Handgun: EASY!Force Advanced + Softgrip Insert Hose: 10m DN8, 315 bar - Premium Quality Spray Lance: 1050 mm Power Nozzle Dirt Blaster Servo Control Features: 4-pole three-phase motor with air and water cooling 3-piston axial pump: with stainless steel pistons Pressure shut-off Integrated fine water filter Oil level sight glass Brass water inlet Design: - Compact upright design concept thanks to vertically mounted motor and pump unit - Small footprint and space-saving external dimensions. Easy to maneuver and transport. Maximum stability ensures the device remains stable. - Slow-running 4-pole motor with water and air cooling, robust pump with stainless steel pistons and brass cylinder head - Long service life with low maintenance costs. High performance with high efficiency. With suction function and water temperature up to 60°C. Advantages: - Ergonomic Vibrasoft dirt blaster, reduces vibrations by up to 30%. Reduces noise and sound levels. Enables effortless and extended work with the rotary nozzle. - Assistance systems and LED status display - Pressure and water flow are adjustable using the servo control regulator between the lance and gun.- EASY!Force Advanced for fatigue-free work without holding forces.

Condition: new, Year of construction: 2022, functionality: fully functional, working width: 750 mm, area performance: 5,100 m²/h, overall weight: 650 kg, warranty duration: 24 months, tank capacity: 110 l, total height: 1,315 mm, total width: 975 mm, total length: 1,695 mm, water tank capacity: 110 l, battery voltage: 24 V, gradeability: 10 %, noise level: 59 dB, rotational speed (min.): 180 rpm, Technical Specification Drive type: Battery powered Traction drive: Traction motor Brush working width: 750 mm Working/suction width: 950 mm Clean/dirty water tank capacity: 110 / 110 l Theoretical maximum area performance: 5,100 m²/h Practical area performance: 3,600 m²/h Battery voltage: 24 V Maximum battery operating time: 4 h Charger supply voltage: 100 – 230 V / 50 – 60 Hz Climbing ability: 10 % Brush rotation speed: 180 rpm Brush pressure: 40 g/cm² Maximum water consumption: 5.7 l/min Sound pressure level: 59 dB(A) Rated power: up to 2,350 W Permissible total weight: 650 kg Dimensions (L x W x H): 1,695 x 975 x 1,315 mm Side scrubbing module for time and cost savings: - Enables cleaning of areas near walls or shelves close to edges. - Retracts under the unit upon contact with obstacles, preventing damage. - Eliminates manual edge cleaning, reducing associated costs. Height-adjustable seat: - Provides a comfortable working position regardless of the operator's height. - Ensures a particularly comfortable posture during operation. - Allows extended and uninterrupted working intervals. Speed-dependent water dosing: - Reduced water consumption when negotiating curves or during slow movement. - Water-saving function increases the effective area coverage. - Shorter floor drying times and lower risk of residual water left in corners or turns. Suction bar made of die-cast aluminium: Bsdjw Id H Nopfx Ap Isww - Equipped with tear-resistant and durable Linatex® squeegee blades for excellent vacuuming results. - Quick and easy replacement of squeegee blades. - Retracts upon wall contact to prevent damage.

Condition: new, operating pressure: 160 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 113 kg, warranty duration: 24 months, TECHNICAL DATA OF THE HDS 7/16-4 C ANNIVERSARY EDITION WASHER: Model: HDS 7/16-4 C ANNIVERSARY EDITION Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Bjdpev Tw I Tsfx Ap Ioww Pressing capacity (l/h): 270 - 700 Working pressure (bar/MPa): 30 - 160 Maximum pressure (bar/MPa): 160 Maximum water temperature (°C): 80 Connection power (kW): 5.1 Power cable (m): 5 Fuel tank (l): 10 Weight (kg): 113 Dimensions (length x width x height) (mm): 1060 x 650 x 920 EQUIPMENT OF THE KARCHER HDS 7/16-4 C ANNIVERSARY EDITION WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High pressure hose: Karcher Professional 10M, DN6, 250BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and comfort of work. Due to its small size, the device can work everywhere where it is difficult to reach, or you often have to work in different places. Additional handles allow the device to be transported with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. The standard EASY!Force high-pressure gun with a rotating lance, 10m high-pressure hose and power nozzle. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has the EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed.

Condition: excellent (used), Year of construction: 2020, operating hours: 837 h, functionality: fully functional, power: 75.02 kW (102.00 HP), fuel type: diesel, gearing type: hydrostat, Equipment: air conditioning, soot filter, KÄRCHER MC-250 Vacuum Sweeper Technical Data: Drive type: Diesel Drive: Two-wheel drive Engine manufacturer: VM Engine power (kW): 75 Emission standard: Euro 6e Driving speed (km/h): 60 Working width with 2 side brushes (mm): 2625 Maximum working width with 3 side brushes (mm): 2710 Sweeping container (liters): 2500 Fresh water tank (liters): 200 Fresh water tank (optional) ( ): 390 Permissible total weight (kg): 6000 Dimensions (L × W × H) (mm): 4491 x 1300 x 1999 Particle filter Comfort seat Bwsdpswpkpusfx Ap Isw Heating and air conditioning Heating Sweeping container: 2500 l Radio system Rotating warning beacon Water tank: 120, 400 l Year-round use This KÄRCHER MC250 is from the year 2020, has only 837 total operating hours and 368 sweeping hours according to the counter, and is in very good overall condition with minimal signs of use and wear, freshly serviced, ready for immediate use, comparable new price €200,000! - Gross price €129,000 // Net price €108,400 - Viewing / test drive gladly possible - Nationwide shipping can be organized, costs depend on distance! - We would be happy to provide you with an attractive leasing / financing offer through our leasing partner!

Condition: reconditioned (used), functionality: fully functional, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, empty load weight: 62 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 10/25-4S COLD WATER PRESSURE WASHER Bodpfew I Ny Iex Ap Isww NEW PUMP HEAD This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 250 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Discharge capacity (l/h): 1000 Operating pressure (bar): 250 Maximum pressure (bar): 275 Connected power (kW): 9.2 Weight (kg): 62 Dimensions (L x W x H) (mm): 560 x 500 x 1090 Hose length (m): 10 EQUIPMENT: NEW PUMP HEAD NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: new, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, input voltage: 230 V, overall weight: 101 kg, warranty duration: 12 months, temperature: 80 °C, TECHNICAL DATA OF THE KARCHER HDS 6/15 C WASHER: Model: HDS 6/15 C Manufacturer: KARCHER Country of production: Germany Bwedpfx Apjv Tng Hj Isw Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 260 - 560 Working pressure (bar/MPa): 30 - 150 Maximum pressure (bar/MPa): 160 Maximum water temperature (°C): 80 Connection power (kW): 3.4 Power cable (m): 5 Fuel tank (l): 15 Weight (kg): 101 Dimensions (length x width x height) (mm): 1066 x 650 x 920 EQUIPMENT OF THE KARCHER HDS 6/15 C WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional 10M !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC eco!efficiency mode - economical and environmentally friendly, even during longer periods of use - Reduces fuel consumption and CO₂ emissions by 20%. Easily accessible water filter protects the pump from impurities in the water. Safety valves, protecting against lack of water and fuel Water softening system to protect the heating coil from scale deposits. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the service life of all pump components on the high-pressure side. Practical handles on the housing + integrated nozzle storage A built-in funnel for filling the cleaning agent prevents accidental spillage of chemicals. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has the EASY!Lock equipment mounting system that allows 5x faster equipment changes than a traditional thread system. The device is completely new and factory-packed

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 430 mm, area performance: 2,000 m²/h, warranty duration: 24 months, tank capacity: 40 l, water tank capacity: 40 l, rotational speed (min.): 180 rpm, brushing unit diameter: 430 mm, We offer for sale a hand-guided scrubber dryer B 40 C Ep 230V. Condition: Perfect - the machine is brand new Year of manufacture: 2024 The mains-powered, hand-propelled B 40 C Ep scrubber dryer can be optionally equipped with a roller brush head featuring parallel cylindrical brushes and sweeping functionality, or with a disc brush head. It is ideally suited for easy, safe, and convenient operation. Four different squeegee blades are available. The scrubber dryer can also be fitted with a range of other useful optional features, such as the Home Base "Mop" or "Box" kits for better transport of additional tools. Innovative Kärcher accessories such as brushes in various hardnesses, different squeegee blades, pad driver plates/roller pad shafts, and pads make this scrubber dryer suitable for a wide variety of cleaning tasks. Technical Data Brush working width (mm): 430 Vacuum working width (mm): 850 Bwsdpfx Ajx Auu Esp Isw Fresh/dirty water tank (l): 40 / 40 Power supply voltage (V/Hz): 230–240 / 50 Rated power (W): up to 1300 Weight without accessories (kg): 66 Dimensions (L x W x H) (mm): 1212 x 520 x 1142 Features and Benefits EASY Operation switch Intuitive operation. Essential functions are easily controlled using the EASY switch. Straight or curved squeegee For perfect suction on every floor type. A variety of suction lips are available: made from natural rubber or oil-resistant polyurethane, slotted lips for delicate floors, or closed lips for rough floors. Mains operation Uninterrupted work. Low weight due to mains operation – ideal for pressure-sensitive floors. Practical device design The slim unit is easy to maneuver in confined spaces. The asymmetric shape ensures the best possible visibility of the cleaning area.

Condition: reconditioned (used), functionality: fully functional, pressure: 180 bar, input voltage: 400 V, overall weight: 130 kg, warranty duration: 6 months, temperature: 80 °C, Kärcher HDS 850-4M Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. Bjdsz Nfa Djpfx Ap Ieww A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 80 Connected load [kW]: 6.5 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and scale buildup inside the heating coil and other lines.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, empty load weight: 34 kg, fuel: super 95, warranty duration: 6 months, KARCHER HD 801 B COLD WATER PRESSURE WASHER This device features new accessories, including a pressure gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. The highly efficient Honda GX160 combustion engine ensures stable operation even during prolonged use. With operating parameters of 150 bar and 650 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Bwsdpjxrtctofx Ap Iow Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power: Petrol Engine: Honda GX 160 Flow rate [l/h]: 650 Working pressure [bar]: 150 Maximum pressure [bar]: 160 Weight [kg]: 34 Dimensions (L x W x H) (mm): 1044 x 542 x 662 Hose length [m]: 10 EQUIPMENT: NEW durable pressure gun NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE

Condition: reconditioned (used), functionality: fully functional, pressure: 150 bar, empty load weight: 100 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 85 °C, Kärcher HDS 801 E Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of 740 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Fully electric water heating allows for operation in areas where exhaust emissions are prohibited. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 740 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 85 Heating element power [kW]: 24 Connected load [kW]: 29.6 Bwodpfxez Dgamo Ap Iow Cleaning agent tank [l]: 20 + 25 Hose length [m]: 10 Weight [kg]: 100 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in chemical tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: new, functionality: fully functional, operating pressure: 250 bar, fuel: super 95, overall weight: 56 kg, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 900 Bedpfswiwv Ijx Ap Ieww Operating pressure (bar) 250 Maximum pressure (bar) 300 Water connection R 3/4" Power type: Gasoline Engine type: G390FA High mobility Color: Anthracite Weight with accessories (kg) 56.8 Dimensions (L x W x H) (mm) 878 x 538 x 702 Included: Spray gun High-pressure hose length: 10 m Power nozzle Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient hand start. High mobility: Large inflatable wheels for comfort on difficult terrain. The compact and small unit is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation. A crankshaft pump with ceramic pistons. The compact Kärcher HD 9/25 G Classic high-pressure cleaner without water heating is the ideal choice for those new to using gasoline-powered devices. The device is very easy to transport in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 250 bar and is equipped with a durable crankshaft pump and a pumping capacity of 900 liters per hour. User-friendly operation is ensured by an integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources. Inflatable wheels ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 9/25 G Classic's sturdy steel frame also prevents external and mechanical damage. The device does not have the ability to draw water from alternative sources.

Condition: reconditioned (used), functionality: fully functional, pressure: 150 bar, empty load weight: 100 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 85 °C, Kärcher HDS 801 E Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of 740 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Fully electric water heating allows for operation in areas where exhaust emissions are prohibited. Bwedez Aiyvepfx Ap Iew Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 740 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 85 Heating element power [kW]: 24 Connected load [kW]: 29,6 Cleaning agent tank [l]: 20 + 25 Hose length [m]: 10 Weight [kg]: 100 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in chemical tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: reconditioned (used), functionality: fully functional, pressure: 150 bar, empty load weight: 100 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 85 °C, Kärcher HDS 801 E Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of 740 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Fully electric water heating allows for operation in areas where exhaust emissions are prohibited. Each unit we offer features unique, actual photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 740 Operating pressure [bar]: 150 Bodpfx Aoz Ai R Usp Ioww Max. Heating temperature [°C]: 85 Heating element power [kW]: 24 Connected load [kW]: 29,6 Cleaning agent tank [l]: 20 + 25 Hose length [m]: 10 Weight [kg]: 100 EQUIPMENT: NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in chemical tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 250 bar, total length: 607 mm, high-pressure hose length: 10,000 mm, total height: 1,063 mm, total width: 518 mm, type of input current: three-phase, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, Technical Specification Voltage: 3 / 376–424 V / 50 Hz Working Pressure: 80–250 bar Flow Rate: 500–1000 l/h Bedpfx Ajw Idutop Ieww Inlet Water Temperature: 60°C Connected Load: 8.8 kW Nozzle Size: 047 Colour: Anthracite Weight with Accessories: 70.3 kg Weight with Packaging: 78.55 kg Dimensions (L x W x H): 607 x 518 x 1063 mm The compact, vertical design is made possible by the vertically mounted motor and pump. Compact dimensions facilitate storage. Manoeuvrable and easy to transport. Stable during operation. 4-pole, low-speed motor cooled by water and air; reliable stainless steel piston pump and brass cylinder head Long service life and economical maintenance. High performance and efficiency. Water suction function for water temperatures up to 60°C. Ergonomic Vibrasoft rotary nozzle Reduces vibrations by up to 30%. Reduces noise level and intensity. Rotary nozzle provides support for demanding cleaning tasks. Smart service design speeds up on-site maintenance Rotatable pump head. Convenient oil level indicator and integrated oil drain in the device housing. Modular design comprising pump, motor, and control cabinet. Support systems and LED display Integrated electronic control system. Automatic shut-off in case of network overload. Automatic shut-off in case of phase loss or leakage from the device. Comprehensive range of accessories with EASY!Lock technology Pressure and water volume can be adjusted via the Servo Control regulator located between the lance and the trigger gun. The EASY!Force Advanced trigger gun allows effortless operation. Rotary lance made of stainless steel, 1050 mm in length. Wide range of additional accessories Storage compartment. Adjustable hooks, e.g. for storing a second lance or power cable. High-pressure hose storage compartment.