Used Hydraulic Valve for sale (18,693)

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Hedpfew A Amrjx Aa Usi Weight: approx. 1200 kg Good condition

Condition: used, Hydraulic unit for mobile clinching tongs or mobile shaper ECKOLD type HA 500 / 2 Serial No. 737 / 783 Year of construction 1991 Hydraulic unit type HA 500 / 2 Hjdpfx Aequzfcja Uei Operating pressure 50 - 500 bar adjustable Delivery rate 2.6 l/min Tank capacity 16 liters Engine power (hydraulics) 3 kW Rated power 3.1 kW Mains connection 380 Volt, 50 Hz. Control voltage 24 Volt, DC - Pressure line with screw coupling - With HAWE GS 2-2 solenoid valve - Mobile on 4 swivel castors Weight without hydraulic oil 125 kg good condition

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm Hsdpfx Aelqadhoa Usi width without fence 800 mm weight approx. 750 kg good condition

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm Hsdpfeifu Ayex Aa Uei sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition

Condition: used, Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Make No.: 124984 Year of construction 2017 lifting capacity 300 kg platform size 1250 x 800 mm useful stroke max. 785 mm Overall height - table bottom 345 mm Overall height - table top 1130 mm Motor power 0,8 kW Mains connection 400 Volt, 50 Hz - foot switch for up and down, with emergency stop and key switch for control on - single shear with one lifting cylinder - revolving safety contact strip with limit switches under the upper frame - adjustable limit switch for the upper lifting restriction - Table top with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic power unit with tank mounted under the table - feet under the table corners, mobile with lift truck own weight 250 kg very good condition, almost as new Hodpfx Aasixq Hns Usi

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter Hodpfx Ash Uhqyoa Uji - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm Hsdpfx Aehrakvoa Usi throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Hedpfx Aashlnzns Uji Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: used, Hydraulically shiftable gearbox for changing rotation direction Hydraulic reversing gearbox from lathe Year of manufacture approx. 1985 Change gearbox for quick reversal of rotational direction to right or left - electric hydraulic pump for hydraulic pressure generation (380 Volt, 0.25 kW) - 2 solenoid valves for switching from right-hand to left-hand rotation - fitted with pulleys Ø 230 and 200 mm - was operated with a 15 kW drive motor, enables rapid change of direction with high torque transmission - drive motor always runs to the right, gearbox is hydraulically shifted to right, left or set to neutral without activation Overall dimensions L x W x H: 480 x 520 x 430 mm Weight: 170 kg Good condition Hodpfjdz Sp Djx Aa Uei

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. Hedpfx Aaer I E Itj Uji throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Hjdjdzp Trspfx Aa Uoi Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. Hjdpfx Aaedzp Tcs Uei The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: ready for operation (used), controller manufacturer: TS Touch, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 2,900 mm, total width: 1,850 mm, total height: 2,260 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 275 mm, empty load weight: 5,100 kg, passage width: 2,050 mm, 4 assen: Y1 / Y2 Y3 / X touchscreenbediening Hedpsyf Ruhefx Aa Uji Willa/Modufix bovengereedschap Y3 = onderste tafel, in hoogte verstelbaar De onderste tafel fungeert tevens als dichtdrukmatrijs (pneumatisch). Er is ook (elektrische) doorbuigingscompensatie in de onderste tabel. Capacity: 40 ton x 2050 mm Backgauge: CNC Max distance between table -- ram: 415 > 575 mm (variable) Locking speed: 90 mm/sec

Condition: ready for operation (used), controller manufacturer: Cadman Touch-B, throat depth: 350 mm, installation height: 500 mm, operating speed: 10 mm/s, reverse speed: 80 mm/s, total length: 5,545 mm, total width: 1,990 mm, total height: 3,380 mm, power: 30 kW (40.79 HP), travel distance Z-axis: 250 mm, empty load weight: 23,000 kg, passage width: 3,150 mm, table width: 250 mm, 5 assen: Y1 / Y2 / X / R / V Laserbeveiliging voor en achter CNC-bombering boven- en onderaan LVD-tooling opname Hodpfx Aoyf Rt Rea Uei Capacity: 250 ton x 4100 mm Backgauge: CNC Locking speed: 80 mm/sec

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm Hjdpfx Aot Tqkdja Uji stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: good (used), mileage: 538,104 km, power: 552 kW (750.51 HP), first registration: 08/2019, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,000 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, Year of construction: 2019, Equipment: AdBlue, air conditioning, central locking, electric window regulation, onboard computer, parking heater, = Additional Options and Accessories = - Rear work lights - Front work lights - Heated mirrors - Windshield - Cab - Tipping hydraulics - PTO - Sleeper cab - Auxiliary heater - Pre-heating automatic system = Remarks = Hedpfxex H Iits Aa Uji Volvo FH16.750 6x4 - PTO/Hydraulic - 3.00 WB - Full air - Work Remote MY: 27-8-2019 KM: 538104 YV2R0P0DXKA849946 PTO & hydraulic system Full air suspension 3.00 m wheelbase Low roof Work remote control = Further Information = Technical Information Number of cylinders: 6 gVW: 29,000 kg Transmission Gearbox: I-Shift, 12 speeds, automatic Axle Configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steering; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Max. axle load: 10,500 kg; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Rear axle 2: Tire size: 315/80R22.5; Twin tires; Max. axle load: 10,500 kg; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Functional Body make: Volvo Condition Technical condition: Good Visual condition: Good More information Please contact VAEX The Truck Traders for further information.

Condition: good (used), mileage: 499,000 km, power: 397 kW (539.77 HP), first registration: 03/2021, fuel type: diesel, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 500 l, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: AdBlue, = Additional options and accessories = - Tipping hydraulics - PTO (Power Take-Off) = Further information = Transmission: I-SHIFT, automatic Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 9,602 kg Payload: 19,398 kg Gross vehicle weight: 29,000 kg Body manufacturer: VOLVO Technical condition: good Visual condition: good VOLVO FH 540 6X4 Tractor Unit EURO 6 L PACKAGE, 460 HP DRIVE: 6X4 AIR SUSPENSION WHEELBASE: 320 CM FH CAB OPTIONS: - AIR CONDITIONING (CLIMA) - NAVIGATION SYSTEM - REFRIGERATOR I-SHIFT AUTOMATIC TRANSMISSION LED LIGHTS HYDRAULIC CONNECTIONS LARGE DIESEL TANK: 500 LITERS Hodpfxsx Sxnko Aa Uoi FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: good (used), mileage: 515,555 km, power: 397 kW (539.77 HP), first registration: 03/2021, fuel type: diesel, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 500 l, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 7,120 mm, total width: 2,540 mm, Year of construction: 2021, Equipment: AdBlue, = Additional options and accessories = - Tipping hydraulics - PTO (Power Take-Off) Hodpoxz Abkefx Aa Uoi = Further information = Transmission: I-SHIFT, automatic Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 9,602 kg Payload: 19,398 kg Gross vehicle weight: 29,000 kg Body manufacturer: VOLVO Technical condition: good Visual condition: good VOLVO FH 540 6X4 Tractor Unit EURO 6 L PACKAGE, 460 HP DRIVE: 6X4 AIR SUSPENSION WHEELBASE: 320 CM FH CAB OPTIONS: - AIR CONDITIONING (CLIMA) - NAVIGATION SYSTEM - REFRIGERATOR I-SHIFT AUTOMATIC TRANSMISSION LED LIGHTS HYDRAULIC CONNECTIONS LARGE DIESEL TANK: 500 LITERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Hsdpfxjxpuipj Aa Uji

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 130 mm -Piston rod: Ø 37 mm -Hole: Ø 30 mm -Pitch spacing: retracted 425 mm -Number: 2 cylinders available -Price: per piece -Dimensions: Ø 83 x 500 mm Hsdpsyi Acfsfx Aa Uei -Weight: 9.3 kg/pc.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir, mobile -Hydraulic pump: Pressure up to 140 bar -Flow rate: 12 l/min -Motor: Electric 2.2 kW / 1380 rpm -Pressure accumulator: 6.3 liters Hjdpoyiz Nwjfx Aa Uoi -Hydraulic tank/filter/valves: see pictures -Dimensions: 770/380/H810 mm -Weight: 110 kg

Condition: excellent (used), mileage: 1,028,872 km, power: 331 kW (450.03 HP), first registration: 05/2014, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 5,900 mm, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2014, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fridge, power assisted steering, retarder, spoiler, = Additional options and equipment = - Roof spoiler - Tipping hydraulics - Air horn Hodpfxoyal Aps Aa Uji - PTO - Radio/CD player - Sleeper cab - Sideskirts - Sun visor - Pre-heating automatic system = Notes = TRANSPORT TO ANTWERP 390 EURO = Further information = Front axle: Tyre size: 385/65 R22.5; Steered; Suspension: parabolic springs Rear axle: Tyre size: 315/80 R22.5; Twin tyres; Suspension: air suspension Unladen weight: 7,932 kg Technical condition: very good Visual condition: very good Reference number: 65

Condition: used, Quantity available: 29 units Manufacturer: GEA Tuchenhagen Type : Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 65 Setting air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Hjdjygnb Ispfx Aa Usi Stainless steel : 316 L

Condition: good (used), mileage: 782,389 km, power: 331 kW (450.03 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, cruise control, electric window regulation, fog lights, fridge, parking heater, power mirror, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 7.891 kg Carrying capacity: 11.109 kg Hjdpfx Aoygmyvoa Usi GVW: 19.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: good (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve Hsdpfegh Dwvox Aa Uji -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg