Used Hermle Uwf 600 for sale (132)

Condition: used, TECHNICAL DETAILS Itjdpfxsup Hw Ee Aalod - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens 840 D, rapid traverse Z-axis: 45,000 m/min, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door Iedoxcp Srjpfx Aaletd - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm Iedpscxxntofx Aaljtd table surface area:690 x 175 mm spindle taper:SK40 turning speeds steps:17 feed range:42 - 680 mm/min feed steps:14 turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller manufacturer: Heidenhain, table width: 480 mm, table length: 900 mm, overall weight: 7,300 kg, Equipment: documentation/manual, TECHNICAL DETAILS Fixed table: 900 x 480 mm MACHINE DETAILS Control: HEIDENHAIN Itodpfx Aoxl Sunoaljd Electrical Data Net weight: 7,300 kg Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total power: 26 kVA Total rated current: 37 A Weight: 6,300 kg EQUIPMENT Tool changer

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 1,000 mm, table length: 560 mm, TECHNICAL DETAILS Travel distances x-axis travel: 800 mm y-axis travel: 600 mm z-axis travel: 500 mm Table Clamping surface: 1,000 × 560 mm Spindle Milling spindle speed: 10,000 rpm Tool holder – diameter: SK40 mm Control CNC control: TNC430 Tool magazine Number of tools: 30 MACHINE DETAILS Electrical data Total power requirement: 35 kW Weight and dimensions Machine weight: approx. 8.50 t Ijdpfxswynuce Aaljtd Space requirement: approx. 2.90 × 3.50 × 3.00 m EQUIPMENT Swivel vice integrated into the left side panel with counter bearing (controlled 4th axis) Centre height 160 mm / centre width 500 mm Wireless measuring probe MP10 Chip tray with coolant pump

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 11721, Description: Control: Heidenhain TNC 430 Working range: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Tool holder: HSK40 Spindle speed Max 8,000 rpm Tool magazine: 30 places Max. Tool diameter: Ø 80 mm; with adjacent free spaces Ø125 mm. Max. Tool length: 300 mm. Itsdpfotq H Sqjx Aaljd Max. Table load: 1,500 kg Dimensions and weight: Machine weight: approx. 7,200 kg Machine dimensions approx. : Width: 3.7 m; Depth: 4.3 m; Height: 3.0 m.

Condition: used, Year of construction: 2010, USED MACHINING CENTER HERMLE MODEL C 40 UP Isdpfoxvq Iujx Aaletd Year of manufacture: 2010 Control unit: HEIDENHAIN iTNC 530 Travel: X 850 mm, Y 700 mm, Z 500 mm Linear axes (X-Y-Z): Dynamic version Milling spindle: 18,000 rpm Spindle taper: HSK-A63 Tool magazine with 38 positions NC tilting rotary table, diameter 800 mm for PALLET CHANGER C axis with torque motor, A axis with tandem drive includes pallet clamping system, hydraulic and pneumatic extension, bed wash, automatic opening/closing cabin door (Load capacity 1,400 kg) Pallet changer device PW 800 for SRT 800 PW - 630 x 630 Load capacity: 800 kg Rotating load/unload station for PW 800 Additional control for clamping system operation for PW 800 Internal coolant supply 80 bar including: Paper filter, Standard coolant system, Linear scale pressurization, bed wash Chip conveyor Air blow cleaning device Manually opening/closing cabin cover Polycarbonate safety windows HEIDENHAIN thermal compensation Electronic handwheel Renishaw touch probe incl. pre-arrangement Laser system – Blum Chip cleaning gun Signal lamp 2 pallets 630x630 mm Additional articulated arm