Used Garage Press for sale (12,439)

Condition: used, Year of construction: 2013, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Specification: V: 3x380-400 Bwedpfx Apjwu Adbo Isw Watt: 25,900 Hz: 50 The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: new, Year of construction: 2025, Performance: 40 and 60 kg/h Automatic start: yes Oil cooler: Yes Briquette size: 50 mm diameter Briquette length: 35 mm Container volume: 0.38 m³ Power consumption: 5.5 kW Machine length: 1860 mm Machine width: 890 mm Bwjdpfewhuulox Ap Ijw Machine height: 1100 mm Weight: 400 kg

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Bwjdjw Sgnkspfx Ap Iew Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm capacity of ejector 5 t ejector stroke 15 mm ram surface 590 x 450 mm power requirement 22,0 kW Bwjdpozl E Saofx Ap Isw Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Nominal force travel 1,46 mm With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Type PR10 200 4100 Capacity 4100 x 200 tons Bsdpfx Aez H Udlsp Ieww Cybelec CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Wila upper and lower clamping system Tools not included

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Bwodpfx Ajz Ib R Iop Ijw Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Bwedsz Nhp Ispfx Ap Isw

Condition: excellent (used), Year of construction: 2008, stroke length: 4,000 mm, throat depth: 400 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, overall weight: 23,000 kg, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, power: 42 kW (57.10 HP), pressing force: 320 t, clearance between the columns: 3,150 mm, Make: LVD Type: PPEB-EFL 320/40 Control: CADMAN YOP: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Bedpfx Aez Rmp Nsp Ijww Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Eccentric press Inventory No. 3687 Manufacturer: Ter Hart Type: EP 25 * Pressing force: 25 tons * Stroke adjustment: 6 - 60 mm * Adjustable ram: 35 mm * Table dimensions: 330 x 230 mm * Installation height: 275 mm Bwjdpfx Ae Advuasp Iow * Overhang: 180 mm * Foot pedal operation * Weight: 750 kg * Control panel with emergency stop * Newly painted!!!

Condition: excellent (used), Hydraulic stamping press Manufacturer: Atom Type: S 350 Pressing force: 50 tons Working area: 1600 mm x 650 mm Bsdpo Advxrjfx Ap Ioww Max. stroke of the ram: 300 mm Max. clearance between ram and table: 350 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Closing force: 635 kN Operating pressure: 206 bar Piston diameter: 200 mm Stroke: 140 mm Daylight height: 150/180 mm Heating plate dimensions: 250 x 300 mm Max. weight of the heating plates: 70 kg Oil tank: 100 l Rated power: 19.66 kW Heating power: 9.6 kW Vacuum motor power: 2.6 kW Bwedpo Ad Izxjfx Ap Iow Light barrier, distance to the tool area: 270 mm Stroke of the vacuum cover: 140 mm Dimensions: 2,650 x 2,100 x 2,100 mm The vulcanizing press from the manufacturer PAN STONE, type S-V-65-2RT-PCD, was used by a renowned German company in the sealing technology and electromobility sector. This company is known for its high quality and innovation in sealing production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its very good condition. This press offers you the opportunity to invest in a proven technology that has been used by a leading company in Germany.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_20250015, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Bwodpfxs Ad Acdo Ap Iew Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_20250016, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Bsds Ad Ackspfx Ap Isww Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, stroke length: 200 mm, throat depth: 400 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table height: 900 mm, oil tank capacity: 350 l, overall weight: 16,950 kg, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, clearance between the columns: 3,820 mm, distance table to ram: 400 mm, ram plate length: 4,270 mm, table length: 4,270 mm, table width: 120 mm, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 • Top tool clamping PP3090 – Wila • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg Bwsdpfx Asz Eqwlsp Ijw

Condition: used, Opal Type: Opal 460 Opal 460 by ATM The Opal 460 is a fully hydraulic, water-cooled hot embedding press for embedding polished samples. The process sequence is carried out automatically. The fully automatic sliding shutter enables smooth opening and closing of the embedding area. Manufacturer: ATM Q Ness GmbH Model: OPAL 460 Operating principle: The Opal 460 is a fully hydraulic, water-cooled hot embedding press for embedding polished samples. In hot embedding, the sample is embedded in an embedding press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding media (e.g., glass fiber reinforced) and the good gap-free embedding. Bwsdpfjzh D Avsx Ap Ijw Hot embedding media are available based on epoxy resin, acrylic resin, phenol resin, and graphite resin. Main application area: Embedding the samples for better sample preparation for further metallographic examinations. Technical data: Press mold diameter: Ø 30 mm, Ø 50 mm Temperature range: 20 ... 200 °C Max. pressure: 310 bar Weight: ~ 40 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Bjdjzryy Eopfx Ap Ieww Technical data: - Pressing area: approx. 2,800 x 1,000 mm - Width: 600 mm - Height: 1,800 mm - Press cylinders: 6

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW Bodpfxjztvwis Ap Isww - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: excellent (used), Year of construction: 2022, Make: HSM Model: V-Press 1160 max Year of manufacture: 2022 Pressing force: 594 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Bsdpfxsz Snzie Ap Ijww Machine dimensions: 180 x 157 x 298.5 cm Feeding opening dimensions: 119.5 cm x 65 cm

Condition: used, Year of construction: 2001, pressure 200 t table surface area 1600 x 1300 mm ram stroke 600 mm dayligth 900 mm die cushion capacity 80 t die cushion stroke 150 mm die cushion area 1200 x 750 mm distance between columns 1650 mm table height over floor 1060 mm ram surface 1600 x 1300 mm oil volume 1400 l Bedpfx Apsz St Ize Isww height over floor 3500 mm rapid drop speed 400 mm/sec drawing speed 42 (80 to) mm/sec drawing speed 20 (200 to) mm/sec return speed 325 mm/sec Control Siemens total power requirement 75 kW weight of the machine ca. 20 t Machine is with cushion in table (80 t), light guards and Siemens control for presses.

Condition: used, Polzer frame press – hydraulic, with 4 press plungers and lateral pressure device For sale is a robust Polzer frame press from the machine engineering sector, manufactured in 1992. This press is ideally suited for the production and gluing of wooden frames, doors, window frames, and other frame constructions in carpentry and joinery applications. Bwjde Abbd Iopfx Ap Isw The four hydraulic press plungers are particularly noteworthy, as they enable uniform pressure distribution and support the precise gluing of frame constructions. The additional lateral pressure device allows the workpieces to be aligned and compressed laterally. This allows frames to be glued together accurately and at right angles. Equipment and advantages - 4 press plungers for uniform and targeted pressure distribution - Hydraulic pressing device for powerful and comfortable operation - Lateral pressure device for compressing and aligning the frames - Robust, solid steel construction - Versatile for use with various wooden frame constructions - Ideal for carpentry shops, joineries, and wood processing companies Technical data - Manufacturer: Polzer Maschinenbau GmbH, Herborn - Machine type: according to the nameplate, probably RP 30/21 - Year of manufacture: 1992 - Drive: hydraulic - Mains connection: according to the nameplate, 380 V - Motor power: according to the nameplate, probably 1.5 kW The Polzer frame press impresses with its robust design and the practical combination of four press plungers and a lateral pressure device. This is an interesting machine for anyone who wants to glue frame constructions efficiently, precisely, and reliably. On-site inspection (Luxembourg) is possible by appointment. The price is gross for net within the EU outside of Luxembourg, meaning 0% VAT.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: V309866-20, pressing force: 126 t, filling opening width: 1,620 mm, filling opening length: 1,000 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 650 kg, total height: 7,034 mm, type of input current: DC, input voltage: 400 V, overall weight: 43,000 kg, noise level: 85 dB, pressure: 280 bar, oil tank capacity: 2,700 l, power: 160 kW (217.54 HP), empty load weight: 43,000 kg, protection type (IP code): IP55, stroke length: 2,900 mm, Equipment: documentation/manual, Bwodsznm H Dspfx Ap Iow

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Bodpfozrpn Sex Ap Isww Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm Bsdpezrpqmjfx Ap Ijww dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 Bedozrptnepfx Ap Ijww with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Bwjdpfx Aszrpt Iep Ijw Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available