Used Frm D Midi for sale (45,841)

Condition: good (used), Weiss climate test chamber with humidity Here we offer you a Vötsch environmental test chamber with humidity. Vötsch 4060-10 air-cooled with humidity Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 2150 mm, width: 1225 mm, depth: 2890 mm Test chamber capacity: approx. 600 liters Operation hours: 3354 h Year of construction: 2007 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.8 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 9.5 K/min Cooling 12.0 K/min Heat compensation at 20°C max. 8000 W Heat compensation at -20°C max. 3000 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10% to 95%r.H. Temperature homogeneity in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation in time 1 to 3 RH% Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 16,0 kW Rated current: 26.0 A Refrigerant: R-404A The rail pair is available for rolling. Two chambers bottom, one complete, one with hole diameter 300mm. Weight (approx.): 1020 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!) Gtodpfx Aaot E Sfgelsw

Condition: excellent (used), For sale is a Drechselmeister MIDITEC FU-175 wood lathe with a centre distance of approx. 400 mm. The used machine is in excellent condition. Technical data: - Centre height: 175 mm - Centre distance: 400 mm (extendable) - Infinitely variable speed control - 3 main speed ranges - Spindle thread: M33x3.5 mm - MK2 taper in tailstock and headstock - Motor power: 0.7 kW / 1 HP Gtodoyf Duuspfx Aalew The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: wood lathe, lathe, turning machine, woodturning, turning tools, wood turning, machine Reference: R-Y032A

Condition: ready for operation (used), Georgii Kobold KSV 6/20 E1-M3-K4/Z1/P2/G1 AC Servocontroller MidiDrive , serial no. according to photo ,used, professionally completely overhauled and tested, 100% functional, scope of delivery according to photos Gjdsi D U Suspfx Aaletw

Condition: new, maximum load weight: 32,965 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, Year of construction: 2025, Equipment: ABS, New vehicle! Buy, rent, or rent with a purchase option by arrangement! 30m³ D-Tec V2A Slurry Tanker Trailer / Rear-Steering Axle / Lift Axle / NEW VEHICLE ---- * Manufacturer: D-Tec * Model: SV 2006 * NEW VEHICLE * Gross weight: 39,000 kg * Unladen weight (manufacturer specification): 6,035 kg Gtjdpfx Asx Suxlealsw * Payload: 32,965 kg * Axles: 3x Valx axles / 1st axle liftable / 3rd axle rear-steering / disc brakes / traction assist * Suspension: air suspension with raising & lowering facility * Tires: 385/65 R22.5 on steel rims * Color: Chassis RAL 9005 black, tank body RAL 7015 grey * Volume: 30m³ / Ø 2.20 m / single chamber * Wabco EBS * Vogelsang rotary lobe pump * Max. flow rate: 6,000 L/min * Swivel outlet at the rear * 8" docking funnel on top, sealable with a manual gate valve * Filling and venting with pneumatic shut-off valve including safety for all air-operated valves * 1" ball valve on pump right side * 4" flushing pipe with two 2.5" free-fall outlets (1x at the front and 1x in the center of the tank) * Automatic pump shutdown * Pneumatic control box at rear left * 1x foldable dome cover * 5 m hose racks left and right (galvanized steel) * Fill level indicator front left * Operating temperature 0-60 degrees Celsius * Side access ladder left * Empty load supports * Single mudguards * Saddle height 1,180 mm * 24V lighting system * 2x LED work lights at rear * 2x LED work lights left and right German trailer!! German documents!! NEW VEHICLE!! New vehicle! Buy, rent, or rent with a purchase option by arrangement! Note on potential errors in the listing: Despite careful preparation of the ad, errors may occasionally occur in the text or information provided. We accept no liability for mistakes, changes, or prior sale. All details are provided without guarantee. Please contact us to verify details or clarify any questions.

Year of construction: 2025, condition: new, machine/vehicle number: AB2024, Pclass = working area X 1250mm x Y 1250mm x Z 25mm Gtedpfxsdvik Ne Aalow skyCUBE P laser processing center - the new Pclass, more productive with a larger work surface than laser cutting machine for your metals Laser processing simple and high-precision - laser engraving, cutting at high speed and quality

Condition: new, Year of construction: 2026, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 5,500 kg, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G Gtsdpfjrh Iw Tox Aalsw · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 3,050 mm, table width: 1,550 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, safety light barrier, skyCUBE XLs class – Large Format – Shuttle Table Laser Cutting Gtodew Ebzmspfx Aaljw The multifunctional flatbed laser center skyCUBE XLs class, produced by PFEIFER technology in Saxony, Germany, is engineered for your professional cutting tasks. It combines advanced productivity with economic efficiency and precision. The machine housing is manufactured from welded and bolted steel construction, specifically designed for industrial and commercial applications. The drive system developed by PFEIFER technology ensures both precision and high repeat accuracy. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, providing you with maximum safety. The ergonomic design with a pull-out worktable facilitates easy loading of the machine. Drawers in the lower section collect cutting residues efficiently. The skyCUBE laser software with file import capability generates precise laser cutting geometries for your requirements. Optimize your cutting quality and speed—even with thick materials—thanks to the 6kW laser power, including when using compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Monitor your production with ease: the large front doors allow convenient access to the entire working area. Position the operator console wherever you prefer. It is mobile, providing optimal visibility of the cutting process at all times. Naturally, your safety is the highest priority when operating the skyCUBE laser! The skyCUBE XLs is a Class 1 laser system. There is no risk of coming into contact with laser beam emissions or reflections during operation. With all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass panels and a perfectly shielded cutting area reliably protect you from laser radiation risks, while an independent safety system enables loading without interrupting production. Select the laser power that best suits your requirements; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a factory-new laser machine from our own production) Maximum dimensions (L × W × H): 2310 × 8505 × 2505 mm / Laser machine: 4.0 T Power supply: depends on laser source (6kW), 400V/50Hz, 3-phase / 27kW Process gas control for: oxygen / nitrogen / compressed air according to material and process

Condition: new, Year of construction: 2026, Pclass = working area X 1250mm x Y 1250mm x Z 25mm skyCUBE P laser processing center - the new Pclass, more productive with a larger work surface than laser cutting machine for your metals Laser processing simple and high-precision - laser engraving, cutting at high speed and quality Gtjdpfx Aaecwph Telew

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, laser wavelength: 1,064 nm, table length: 1,500 mm, table width: 3,000 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 8,500 kg, warranty duration: 24 months, space requirement height: 2,400 mm, space requirement length: 8,550 mm, working range: 1,500 mm, Equipment: cooling unit, safety light barrier, XL class = processing area X 1550 mm x Y 3050 mm x Z 150 mm High-precision linear axis system with 6 - 12 KW laser power Double change table system, laser processing at one working height! (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Maximum dimensions (L × W × H (with table 8504) × 2310 × 2400 mm / laser machine 6.5 T + external loading table 2T = 8.5 tons Power supply depends on the laser source (6kW) 400V/50Hz 3 phases / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on the material and process Godpfxor D Nfke Aaletw Simple and highly precise laser processing - laser cutting at high speed and quality

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 3,050 mm, table width: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, skyCUBE XL class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XL class, manufactured by PFEIFER technology in Saxony, Germany, has been designed for your professional cutting applications. It combines a new level of productivity with cost-effectiveness and precision. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, offering you the highest level of safety. The ergonomic design with a pull-out worktable makes machine loading easier. Drawers in the lower section of the machine collect cutting waste. Optimize quality and cutting speed even with thick materials thanks to 6kW laser power—even when cutting with compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Naturally, you’re always on the safe side when operating the skyCUBE laser! The skyTUBE Pro is a Class 1 laser system. There is no risk of exposure to laser beam emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass and a perfectly shielded cutting area reliably protect you from the hazards of laser radiation, while an independent safety system allows loading without interrupting production. Gtsdpet A N A Rjfx Aalow Select the laser power best suited to your needs; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a brand-new laser machine manufactured by us) Maximum dimensions (L×W×H): 2310×8505×2505 mm / Laser machine 4.0 T Power supply depending on laser source (6kW) 400V/50Hz 3 phase / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on material and process Laser processing made easy and highly precise – high-speed, high-quality laser cutting

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, working length: 1,250 mm, working width: 1,250 mm, Equipment: CE marking, cooling unit, documentation/manual, P class = processing area X 1250 mm x Y 1250 mm x Z 100 mm High-precision linear motor axis system with 6 KW laser power (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Simple and highly precise laser processing - laser cutting at high speed and quality Gtedpfx Aek Ran Esalsw

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder Godpfx Aaewml S Eolotw - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: refurbished (used), Year of construction: 2009, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2009 Configuration: - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Turning belt with alignment table - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: Gtjdjv Ebx Hspfx Aalsw - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: good (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB700 - 14K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Envelope station autoloader Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. Gsdpfoukpimox Aaljtw More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just arrived and will be available shortly when it has passed through our complete maintenance program. Then the machine is 100% complete and will work like new. Please come over for a test if you like.

Condition: refurbished (used), Year of construction: 2007, Looking to expand your existing Buhrs ITM (Winkler+Dunnebier) W+D envelope inserter with more feeders? Godpfjq Ec Rgox Aaletw We have all Buhrs ITM feeders available! The Buhrs / Winkler and Dunnebier AT25rotary and HF3 friction feeder are developed to be installed on the Buhrs-ITM BB300 envelope inserting systems The Buhrs / Winkler and Dunnebier HF2 friction and the RF2 vacuum rotary feeder are developed for the Buhrs-ITM BB600 and the Buhrs BB700 envelope inserting systems. The Buhrs RF2 vacuum rotary feeder can be retrofitted on most BB600 and all BB700 LL envelope inserting systems in the market The RF2 vacuum rotary will seperate the material with three suction cups and has bottom fed. This feeder is capable to feed material with high speeds. We have the following feeders available! AT25 Vakuum rotary feeder (BB300) AS25 Shuttle feeder (BB300) HF3 vakuum friction feeder (BB300) RF2 Servo vacuum rotary feeder (BB600 and BB700) AS2 Shuttle feeder (BB600 and BB700) HF2 Vacuum friction feeder (BB600 and BB700) All feeders we offer for sale are completely checked and tested. All parts which need to be replaced are new. We have multiple of the Buhrs ITM / Winkler & Dunnebier feeders available. Contact us for a quote.

Condition: refurbished (used), Year of construction: 2008, We have a Buhrs - W+D BB700 14K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is the latest software platform which manufacturer W+D has to offer. Gtedpfxoq Eg Hnj Aaljw Other feeders and camera's optional possible! Year of built: 2008 Configuration: - 6 station base - 4x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 14,000 cycles per hour

Condition: refurbished (used), Year of construction: 2008, We have a Buhrs - W+D BB700 14K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is the latest software platform which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2008 Configuration: - 6 station base - 4x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder Gtsdpfxsq Eg Iao Aalow - 70 gsm 14,000 cycles per hour

Condition: used, Year of construction: 2009, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Gtodpowmmh Isfx Aalow Other feeders and camera's optional possible! Year of built: 2009 Configuration: - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Turning belt with alignment table - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2021, suspension: air, color: black, Year of construction: 2021, Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle Empty weight: 3.216 kg Carrying capacity: 40.784 kg GVW: 44.000 kg Technical condition: very good Visual appearance: very good Gtsdexu Ddgjpfx Aalsw

Condition: excellent (used), Year of construction: 2011, Automatic Laminator D&K Europa System B2 The machine is 100% functional and ready for immediate use. Available for inspection in Warsaw. Technical specifications: Max. sheet size: 540 mm x 740 mm Min. sheet size: 210 mm x 220 mm Minimum paper weight: 115 g/m² Maximum paper weight: 400 g/m² Working temperature: 80-145°C Weight: 750 kg Gsdpfxeylk Ete Aalotw Power supply: 380 V Chromed steel cylinder Pneumatic clamping, separation, and automatic high pile feeding. Sheet feeding precision: ±2.0 mm Touch panel for easy operation Sheet alignment module

Condition: good (used), axle configuration: > 3 axles, first registration: 07/2017, total width: 2,470 mm, total height: 1,540 mm, suspension: air, color: blue, Year of construction: 2017, Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Gtedpfx Aewzw Aloalow Rear axle 4: Max. axle load: 9000 kg Weights Empty weight: 6.358 kg Carrying capacity: 37.642 kg GVW: 44.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: OV-84-VK

Condition: new, Year of construction: 2018, Available: 3 pieces (new) Gsdsvdty Topfx Aalotw Parker MADIGAS nitrogen generators are used to produce nitrogen gas from compressed air and are an economical, reliable and safe alternative to traditionally supplied nitrogen in cylinders or in liquid form. Nitrogen is used as an inert, clean and dry gas to eliminate oxygen from products and processes Overall dimensions W 450 x D 609 x H 1034 mm. Minimum/maximum operating pressure 6/10 bar Weight 196 kg Volume 29.3 l Voltage 110/230 V Year of manufacture: 2018

Condition: excellent (used), Year of construction: 2002, Meyn Deboner Type: D40 Deboner type: poultry thighs and drumsticks Performance: up to 2,400 pieces per hour depending on application Dimensions: 1500x1300x2000 mm Weight: 500 kg If you want to see a video of the machine in operation, search for 'e-mawi' on YouTube or request a link Gedpfsyiubyex Aaletw Year: 2002

Condition: new, input voltage: 400 V, - EXCELLENT QUALITY FROM EUROPEAN SOURCES - STAINLESS STEEL SPIRAL - STAINLESS STEEL TUB - WITH PROGRAMMABLE DIGITAL CONTROL FOR BOTH SPEEDS - ALSO WITH MANUAL BUTTON ON DISPLAY - CAN ALSO ROTATE IN REVERSE DIRECTION - TUB CAN BE ROTATED SEPARATELY - AFFORDABLE PRICE FOR GREAT QUALITY Gedjx At Htjpfx Aaljtw

Condition: used, functionality: fully functional, machine/vehicle number: 9420358 IMA, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision VM – Medium Frequency Spot Welding System Manufacturer: ElmaTech GmbH Location: Morsbach, Germany System consists of: MF Inverter: MIDISpot Vision QSVM 9000/12000T Serial number: 9420358 IMA Weight: 95 kg MF Transformer Handheld Welding Gun: ELMA Vision VM Serial number: 9420356 IMA Weight: 35 kg Standard: EN500063 Gedpfex Dch Aox Aalstw Description: This welding system from ElmaTech comprises a high-performance medium-frequency inverter (QSVM 9000/12000T) and an MF transformer handheld welding gun (ELMA Vision VM). It is specifically designed for professional resistance spot welding and is ideal for: - Automotive and body construction - Metal processing - Robot-based welding cells - Manual and semi-automatic spot welding workstations The medium-frequency technology (10 kHz) ensures: - High energy efficiency - Consistent welding results - Reduced electrode wear - Optimal process control Technical Data – MIDISpot Vision QSVM 9000/12000T (MF Inverter) Output: U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty cycle: 5 % Input: Voltage: 3~ 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Further details: Insulation class: F Cooling: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision VM (MF Transformer Handheld Welding Gun) Output: U₂₀: 12.5 V Current range: 0 – 15 kA Welding energy: 15 kAs Input: Uₙ: 560 V Frequency: 10 kHz Power: 30 kVA Duty cycle: 50 % Protection class: IP 21 Further details: Insulation class: F Cooling: WF (water cooling) Weight: 35 kg Typical Applications: - Spot welding of steel and stainless steel - Body construction / vehicle manufacturing - Industrial high-cycle production - Robot-supported welding processes - Repair and rework stations