Used Frick Screw Compressor for sale (7,570)

Condition: excellent (used), Year of construction: 2011, operating hours: 53,132 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,596 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Screw compressor GA132VSD Atlas Copco Blsdpox Rwz Tjfx Afmsp Integrated frequency converter 132 kW 8.5 bar 26.06 m³/min

Condition: as good as new (ex-display), Year of construction: 2024, pressure (max.): 13 bar, CSA 15/13 SCREW COMPRESSOR, NO. 1,000 MOUNTED ON 500-LITER TANK WITH DRYER AND FILTERS 11 kW, 15 HP MAXIMUM PRESSURE: 13 BAR 400V/50Hz/3-PHASE FLOW RATE: 1147 L/min NOISE LEVEL: 67 dB(A) DIMENSIONS: 1540x665x1535 mm, WEIGHT: 450 kg Attached: User and maintenance manual Bljdpfx Afjz Duc Nomjp CE declaration of conformity

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 – 11 bar screw compressor Manufacturer: Kaeser Bodpfx Afohy Tzysmslp Type: SM 9 Machine type: Oil-injected screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Delivery rate: 0.75 m³/min Motor rated power: 5.5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO XAHS186 portable compressor with aftercooler, fully serviced. Technical specifications: capacity: 10.50 m3/min; operating pressure: 12 bar; year of manufacture: 2015; engine: DEUTZ, 104 kW operating hours: 1939 h The compressor is in perfect working order, ready for operation, and comes with a warranty. Net price: PLN 109,500 Gross price: PLN 134,685 The machine was imported in excellent condition and has all the necessary documents for registration. Bledpfx Afo Af H Sxjmop Links to videos are provided below.

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling Bledpfxozu Aibj Afmep - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, ALUP ALLEGRO 15-10 screw compressor with frequency inverter, recently serviced. Bljdpfx Afj Afdb Rjmsp Technical data: capacity: 2.54 m3/min; engine: 15 kW; maximum pressure: 9.7 bar; year: 2016; operating hours: 7583 h; compressor in fully working condition, with warranty. Net price: 12,500 PLN Gross price: 15,375 PLN Link to video below.

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Origin: Made in Belgium Bsdpfx Afexk U Aremslp No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET 230 V Screw Air Compressor THE SET INCLUDES: - CORMAK AIR30 SCREW AIR COMPRESSOR. - 150 L HORIZONTAL COMPRESSED AIR RECEIVER TANK (with wheels). CORMAK AIR30 Screw Air Compressor – Compact Power for Your Business Are you looking for an efficient and reliable air compressor suitable for smaller workshops, service centers, or hobby applications, while also requiring a single-phase power supply? The CORMAK AIR30 screw air compressor is the perfect solution. With a motor power of 3.0 kW and an impressive actual air delivery of up to 400 L/min, it provides a continuous supply of compressed air essential for the efficient operation of impact wrenches, air blow guns, and spray painting tools. Powered by 230 V / 50 Hz, this model has been designed for continuous operation, making it an excellent choice for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw air compressor is a step towards significantly improving working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The CORMAK AIR30 features a reliable and robust direct-drive system that eliminates vibrations and the need for belt drive adjustments. This proven solution ensures stable performance and a long service life by transferring power directly from the motor to the screw compression unit. The maximum operating pressure generated by this screw air compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM series electronic control panel, giving you access to essential compressor information and improving flexibility and control over your operations. ✅ Pressure: up to 10 bar | ✅ Air Delivery: up to 400 L/min | ✅ Power: 3.0 kW | ✅ Power Supply: 230 V Bedpfx Afo Agu I Tsmelp Technical Specifications Parameter Specification Motor Power 3.0 kW / 4 HP Voltage 230 V / 50 Hz Air Delivery at 0–6 bar Average 400 L/min Air Delivery at 6 bar 390 L/min Air Delivery at 8 bar 380 L/min Air Delivery at 10 bar 380 L/min Air Outlet Connection Diameter (G) 1/2" Dimensions 1110 × 650 × 1320 mm Weight 145 kg

Condition: new, Year of construction: 2026, NEW ARRIVAL!!! CORMAK AIR55/200 Screw Air Compressor – Compact Power for Your Business Are you looking for a professional solution to power pneumatic tools in your workshop, paint shop, or small production line? The CORMAK AIR55/200 screw air compressor is the perfect choice. With a motor power of 5.5 kW and an impressive actual air delivery of up to 690 L/min, it provides a continuous supply of compressed air essential for the efficient operation of impact wrenches, air blow guns, and spray painting tools. Powered by 400 V, this model has been designed for continuous operation, making it an excellent choice for demanding applications such as smaller workshops, tire service centers, and craft businesses. Investing in a CORMAK screw air compressor is a step towards significantly improving working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The CORMAK AIR55/200 features a reliable and robust direct-drive system that eliminates vibrations and the need for belt drive adjustments. This proven solution ensures stable performance and a long service life by transferring power directly from the motor to the screw compression unit. The maximum operating pressure generated by this screw air compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM series electronic control panel, giving you access to essential compressor information and improving flexibility and control over your operations. ✅ Pressure: up to 10 bar | ✅ Air Delivery: up to 690 L/min | ✅ Power: 5.5 kW | ✅ Power Supply: 400 V Key Features That Set These Models Apart 1. Permanent Magnet (PM) Motor Technology - High energy efficiency: These motors achieve efficiency levels corresponding to IE4 or even IE5 standards. - Excellent performance at low speeds: They maintain high efficiency even at very low rotational speeds, unlike conventional motors, which lose efficiency when operating outside their rated speed range. - Compact and lightweight design: PM motors are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive (VSD) Control - Demand-based operation: The compressor does not operate according to the traditional "all-or-nothing" principle (load/unload operation). If your equipment requires only 30% of the compressor's capacity, the compressor automatically reduces its motor speed, consuming proportionally less energy. - Elimination of unnecessary idle operation: Conventional compressors often continue running for several minutes after filling the air receiver, consuming approximately 25–30% of their rated power without producing compressed air. 3. Soft Start Technology - Reduced electrical load: Protects the facility's electrical installation by minimizing high starting currents. - More frequent start-stop cycles: Allows the compressor to start and stop more frequently without the risk of overheating the motor windings. Technical Specifications Motor Power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Air Delivery at 0–6 bar Average 690 L/min Blodpfx Afs Agu N Rsmsp Air Delivery at 6 bar 690 L/min Air Delivery at 8 bar 650 L/min Air Delivery at 10 bar 650 L/min Air Outlet Connection Diameter (G) 1/2" Dimensions with Air Receiver Tank 1430 × 650 × 1320 mm Weight 170 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, ALMIG BELT 15-10 screw compressor with air dryer, recently serviced. Technical specifications: Capacity: 1.98 m3/min; Engine: 15 kW; Maximum pressure: 10 bar; Operating hours: 4945 h; Year: 2018 The compressor is in fully working condition. Net price: PLN 11,700 Gross price: PLN 14,391 Bledpfj Ad E U Nsx Afmsp The link to a video is provided below.

Condition: like new (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 907445, pressure (max.): 10 bar, Screw compressor Brand: Mahle Model: MSK D30 Year: 1991 NO.: 907445 Characteristics: Blsdjrn Symopfx Afmop Version: 4.2/10/AF Volumetric flow rate: 4,2 m³/min Motor power: 30 kW Pressure: 10 bar Speed: 1,450 rpm

Condition: used, Year of construction: 1993, feed pressure 8,0 bar liter capacity 2340 l/min Number of working hours 13382 h voltage 400 V total power requirement 15,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,0 x 0,8 x 1,3 m Serial no. 1006 Blsdsz Dxn Aopfx Afmep Operating hours run: 26736 Operating hours load: 18261

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, ALMIG FLEX 15 screw compressor – machine after servicing Technical data: capacity: 0.46-2.13 m3/min; engine: 15 kW; maximum pressure: 5-13 bar; operating hours: 21586 h; year: 2017 The compressor is in fully working condition. Net price: 11,700 PLN Gross price: 14,391 PLN The link to the video is provided below. Bedpfxe Ad Hagj Afmolp

Year of construction: 2005, condition: reconditioned (used), AUGER COMPACTORS Auger compactors are designed for the disposal of large quantities of material. Bulky materials can also be compacted effectively. The continuous rotation of the auger draws the material to be compacted into the high-performance compactor. The compaction takes place in the adjacent container. Compared to piston presses, up to 60% higher container fill levels can be expected here. used, fully functional machines Price from €3,300 depending on condition, VAT exclusive. Bljdpfx Afjgypgasmsp Delivery possible.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ALUP ALLEGRO 15-10 screw compressor with frequency converter, recently serviced. Technical data: capacity: 2.54 m3/min; engine: 15 kW; maximum pressure: 9.7 bar; year: 2015; operating hours: 8032 h; compressor in perfect working condition, with warranty; net price: 12,500 PLN; gross price: 15,375 PLN. Link to video below. Blode Ad Hbqspfx Afmsp

Condition: excellent (used), Year of construction: 2023, volume flow: 1.06 m³/h, operating pressure: 10 bar, pressure (min.): 10 bar, pressure: 10 bar, SCC SMART 7 screw compressor Blsdpfoz N Ah Eex Afmjp 7.5 kW motor Capacity: 1.06 m³/min Pressure: 10 bar Year of manufacture: 2023 Operating hours: 902 Compressor has been serviced, with filters and oil changed.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 250 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 55 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 4 kW / 10 bar (also available as a 7.5 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure vessel Blodpfxszpxx Io Afmjp refrigerant dryer fine filter New machine, delivery time approx. 1 week We would be happy to demonstrate the machine at our premises. Highly efficient, permanently excited servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color screen single-stage screw unit air-cooled durable and low maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 250 kg Pressure: 10 bar Flow rate: approx. 0.6 m³/min at 10 bar Noise level: 55 ± 2 dB(A)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, ATLAS COPCO SF4FF rotary screw compressor with air dryer, recently serviced. Technical specifications: Power supply: 400 V Motor power: 3.70 kW Effective capacity: 340 l/min Maximum pressure: 10 bar Operating hours: 2498 h Year: 2011 Compressor in perfect working condition. Net price: 7200 PLN Blodo Ad E Txspfx Afmsp Gross price: 8856 PLN Link to video below.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DIESEL ATLAS COPCO XAS 88 compressor with an aftercooler (dryer), fully serviced. Compressor complete with documentation for registration in Poland. Technical data: flow rate: 5.20 m3/min; operating pressure: 7 Bar; year of manufacture: 2019; weight: 750 kg; engine: KUBOTA; compressor in fully working condition. Bodpez Rxczjfx Afmslp net price: PLN 57,500 gross price: PLN 70,725 Below is a link to a video showing the machine in operation.

Condition: excellent (used), Year of manufacture 2012 Bodew Rcpzepfx Afmelp Tank 500 l Pressure 11 bar Capacity 1500 l/min Motor 7.5 kW Operating hours 1752 h Documentation

Condition: excellent (used), Year of construction: 2018, operating hours: 513 h, functionality: fully functional, overall weight: 649 kg, power: 33 kW (44.87 HP), fuel type: diesel, Atlas Copco XAHS 38/XAS88/Compressor/Construction Compressor/12 Bar • Manufacturer: Atlas • Model: Copco XAHS 38/XAS88 • Year of manufacture: 2018 • Operating hours: 513 hours • Power: 33 kW/44 hp • Engine: Kubota 4-cylinder diesel engine • 12 bar • Transport length: 1.94 m • Transport width: 1.16 m • Transport height: 1.05 m Bjdpfx Aez A Dq Tefmjlp • Total weight: 649 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Blsdpfx Afjycctqemep Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: excellent (used), Year of construction: 2024, Manufacturer: BOGE Type: C 14 PMDR -350 Year: 2024 Pressure: 13 bar Free air delivery: 1.74 m³/min Motor: 11 kW Controller: BOGE focus control 2.0 Voltage: 400 V / 50 Hz Dimensions (W x H x D): 1890 x 1824 x 854 Weight: 475 kg Blodpoz Svtgjfx Afmop

Condition: excellent (used), S017062 PROD. ATLASCOPCO TYPE GA26 Plus Bljdpfx Afsz Iz Igsmsp S/N API310087 YEAR 2008 POWER (kW) 26 CAPACITY (m3/min) 4.79 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 22740/23509 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, ABAC FORMULA 22 screw compressor, serviced Technical data: capacity: 3.24 m3/min; engine: 22 kW; maximum pressure: 10 bar; year: 2018; Bledpj Ad E Upsfx Afmjp operating hours: 2982 h; compressor in full working order, warranty included. Net price: 11,500 PLN Gross price: 14,145 PLN Link to the video is provided below.