Used Flanging for sale (1,577)

Condition: used, mileage: 787,664 km, power: 235 kW (319.51 HP), first registration: 12/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, Equipment: ABS, air conditioning, Special equipment: Car phone antenna, exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electric maneuvering aid, mechanical battery disconnect switch, co-driver's bench seat, curb mirror on the right electrically adjustable and heated, bridge mounting bracket bolted on, differential lock rear axle, digital axle load indicator for air-suspended axles, pressure sensor for air suspension bellows, ETA circuit breaker, driver's seat comfort, air-suspended and heated, with lumbar support, flange coupling auxiliary drive elastically loose, high-load roll stabilization, automatic climate control, air deflection plate to prevent dust swirling, heated air dryer, trailing axle NOL-08 steered, liftable, auxiliary drive flywheel side, rotating beacon (2), exterior sun visor, sun protection roller for side windows, driver and co-driver door, power socket in the cab 12V and 24V, control module for external data exchange, V - constant speed control (Brakematic), additional long-range/fog lights with cornering light Blodj Agqw Hjpfx Afmep Additional equipment: Axle configuration: 6x2, approach/front mirrors, trailer socket 24V / 7-pole, trailer socket ABS, anti-slip control (ASR), audio system: MAN basic Line radio/CD, battery 175 Ah, on-board computer MAN-Tronic, electronic braking system MAN-Brakematic, EURO 5 engine, cab: M (medium length), suspension: leaf spring / air, electric windows, flame starter system, tinted windshield, generator 28 V 80 A, gearbox 16-speed - type: ZF 16 S, lift-up roof mechanically, body/superstructure: chassis, rocker arm - EVB brake, fuel filter heated, fuel tank: combination tank - 480 L diesel + 75 L urea solution (AdBlue), air intake raised, air compressor 1-cylinder 360 ccm, engine 10.5 L - 235 kW diesel, spare wheel holder behind rear axle, disc brake rear axle, disc brake front axle, side protection device, tinted rear side windows, sun protection roller for windshield, spray mist reduction, stabilizer on one rear axle, stabilizer front axle, TGS, door windows tinted, underride guard rear, underride guard front, visco fan, front axle VOK-08 curved, central locking, permissible total weight 26.0 t * MAN TGS 26.320 6x2-2 BL * Body Zöller Medium XXL * Dump body Zöller 356 * Fuel Diesel * Gearbox Automated manual gearbox ZF AS-Tronic * Emission class Euro 5 * Wheelbase 4200/1350 mm * Tare weight 17895 kg * Tire Axle 1 and 3 385/65 R22.5 * Tire Axle 2 315/80 R22.5 * Liftable trailing axle with joint * Mileage 787664 km * VIN WMA18SZZ89W124427 * Valid inspection until 12/2026 * Year of manufacture 10.12.2008 * Tel. Mobile WhatsApp

Condition: used, mileage: 702,841 km, power: 353 kW (479.95 HP), first registration: 06/2015, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Wheelbase shortened to 3200 mm. Engine D2676LF25 - 480 hp / 353 kW, EURO6 SCR - 2300 Nm, C-R. Transmission: MAN TipMatic 12 23 DD. Front springs: Parabolic, 9.5 t. MAN PriTarder. Engine overhaul with replacement of clutch and release fork. Brakes 1 and 2: NEW. Rear frame overhang: 1950 mm. Engine D2676LF25 - 480 hp / 353 kW, EURO6 SCR - 2300 Nm, C-R. Transmission software: MAN TipMatic® Profi (for on-road use). Transmission: MAN TipMatic® 12 23 DD. Fuel tank: Aluminum, 300 l, short, left side, and 60 l AdBlue. Front axle: VOK-09, angled. Front springs: Parabolic, 9.5 t. Water cooler and charge air cooler for ambient temperatures up to 35°C. Rear springs: Air suspension. Instrument panel: km/h, 'High-Line'. Steering wheel: Adjustable in height and tilt. MAN BrakeMatic (electronic braking system). Rear axle: Hypoid HY-1350. Rear axle ratio: i = 2.85. Differential lock in rear axle. Wheels: Disc, 10-hole, 9.00-22.5 on front and rear, non-driven axle. Wheels: Disc, 10-hole, 11.75-22.5 on 1st driven axle. Wheels: Disc, 10-hole, 9.00-22.5 on 1st rear axle. Fuel tank mounting. Tag axle: NOL-08, steered, liftable. Digital tachograph, manufacturer: CONTI. MAN EasyStart with TipMatic. Cab: Medium-high roof 'XLX', 2440 mm wide, 2280 mm long. Storage compartment accessible from inside and outside - interior latch release. Seat covers: Comfort quality. Driver's seat: Air-suspended, with lumbar support, shoulder adjustment, and heating. Passenger seat: Static, adjustable in length and backrest. Front flap: Releasable from inside. Two vehicle keys additional. Door extension. Door interior panel: Fabric. Visco fan. Air deflection plate to prevent dust from being swirled up. EDC engine control. General PTO parameterization. Emergency braking signal (ESS). PTO: NH/4C, without flange, f=1.05, on the right side. Fuel filter. Heater for fuel filter. Pressure sensor for air suspension bellows. Preparation for data interface for remote download with digital tachograph. Tachograph calibrated. Chassis tipping mechanism: Hydraulic/electric. Safety package: Active plus. Comfort package 1: Driver. Auxiliary heater: EBERSPÄCHER D4S. Air conditioning: AC R134A, CFC-free, with automatic temperature control. Cab insulation: NORDIC (against cold) for 'XLX'. Operating manual: German. Mirror covers: Painted in cab color. Air intake: Raised, with dry air filter. Fine dust and pollen filter. Connection for external speed control (ZDR). Control module for external data exchange (KSM) with fleet management system interface 2.0 (FMS). Body functionality. Single-cylinder air compressor: 360 ccm. Exhaust: Side, right, with ground outlet. Regulated rocker arm brake (EVBec). MAN PriTarder. Steering wheel lock with immobilizer. Multifunction steering wheel for cab. Emergency Brake Assist 1 (EBA1). Anti-lock braking system (ABS). Brake connection: 2-line. Entry light for driver and passenger. Armrests for driver's seat. Compressed air connection in the cab. Compressed air hose and compressed air gun. Stone guard in front of the cooler. Engine start/stop device under the front flap. Fuel tank cap: Lockable, 1 piece, vented for matching keys. AdBlue tank cap: Lockable, 1 piece. Headlight leveling. Additional dipped and fog lights with cornering lights. Halogen double headlights H7 for right-hand traffic. 2 work lights on the cab roof. Interior lighting: Red/white in the cab roof. Automatic lowering of air suspension. Parameter input ECAS with additional circuit to suppress level cont Bjdpfx As Agqnwjfmjlp

Condition: used, Year of construction: 2006, machine/vehicle number: 76005007 06 0006, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 5,250 kg, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used inclined-bed lathe, manufactured in 2006. The manufacturer is Trens in Trenčín (Slovakia), where the machine is known as the SBL 500 CNC. The 12-station turret has 6 driven stations, allowing for drilling and milling operations to be performed in a single setup. It is controlled by a Siemens Sinumerik 810D. The machine is located in the Düsseldorf area and was running during our inspection. Bodpfx Afez H Udxemjlp TECHNICAL DATA - Year of manufacture: 2006 (according to the nameplate) - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm - Maximum turning length: 750 mm - Distance between centers: 550 mm - Turret: 12-station, with 6 driven stations - Main drive: 22 kW, max. 4,200 rpm - Machine weight: 5,250 kg (nameplate) EQUIPMENT AND ACCESSORIES - Chip conveyor Tsubaki with cable carrier (SRF 040) - Tool holders, equipped - Turning and clamping tools - Setup tools CONDITION The machine was running during our inspection on October 1, 2026. We can send you short videos of the machine in operation upon request. AREAS OF APPLICATION Suitable for shafts, flanges, and housing parts up to 400 mm in diameter, where transverse drilling or surface machining is to be carried out at the same time. LOCATION AND PROCESSING The machine is located in the Düsseldorf area. Inspections can be arranged by appointment. The buyer is responsible for dismantling, loading, and transport; upon request, we can provide contact information for forwarding companies in the region. Price on request. Please contact us via the contact form.

Condition: new, We can deliver all spare parts for JUNG JF- und HF-series. z.B. grinding flanges, switches, bellows, refurbished grinding and transvers spindles, hydraulic pistons etc. Also equipment like magnetic chucks (new oder refurbished), dressers, filtrtion units, lubrication pumps etc. Also used parts which are discontinued by the manufacturer. Bedpegbt U Nsfx Afmelp Please inquire wih the exact part name.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, power: 5.1 kW (6.93 HP), main lifting speed: 4,800 mm/min, fine lifting speed: 580 mm/s, working height: 6,000 mm, Equipment: documentation/manual, 2x Konecranes CXT single-rail trolley (without girder) for single-girder bridge crane, wire rope hoist, tandem set including radio control & control cabinet (year of manufacture 2018) Bjdpfxez D I Hhe Afmolp Original new price: approx. 40,000 Euro/NET For sale is a high-quality, complete tandem electric wire rope hoist set from the premium manufacturer Konecranes, model CXT30410020A35FALOS (ALMOST NEW). The system was used in an industrial setting and was professionally dismantled in the summer of 2022 as part of the closure of the Ettlinger Weberei (as can be seen from the documentation). Since the wire rope was renewed shortly before the dismantling on June 22, 2022, according to the available factory certificate, the installed ropes are as good as new. All documents, inspection books, and wiring diagrams are available in the original Konecranes folder. Technical data (per hoist/trolley): Manufacturer: Konecranes Model: CXT30410020A35FALOS Design: Single-rail trolley / under-flange runner (single-girder bridge crane / monorail) Girder flange width: 180 mm Year of manufacture: 01/2018 Load capacity: 2x 2,000 kg (2.0t) Lifting height: 6.0 m Duty class: M5 (FEM 2m) – very robust industrial design Lifting speed: 4.80 / 0.58 m/min (main and fine lifting) Trolley speed: 20.0 m/min Operating voltage: 400 V / 3~ / 50 Hz (control voltage 48 V) Lifting motor: 2.25 kW (S3-60% ED) | Travel motor: 0.3 kW Protection class: IP55 Extensive accessories & equipment: HBC-radiomatic radio remote control: Yellow handheld transmitter with selector switch for tandem operation (Crane I / I+II / II) including HBC receiver. Batteries are fully charged. SICK reflective light barrier (WL280-2R4331): Integrated collision protection for the safe parallel operation of both trolleys. Complete electrical system: Including central crane control cabinet (Siemens components) and AKAPP cable track connections. Like-new hoisting ropes: Renewed on June 22, 2022 (as can be seen from the documentation) and hardly used due to the subsequent shutdown. Complete documentation: Original folder with inspection books, operating instructions for hoist/travel drive/radio, spare parts catalog, wiring diagrams, and software CD. Special features & highlights: Tandem operation (HBC radio): Control of trolley I, trolley II, or both synchronously via a transmitter switch on a main girder – ideal for long goods without diagonal travel. Collision protection: SICK reflective light barriers prevent unintentional collisions. Fine lifting & soft start: 2-stage lifting motor (4.8 / 0.58 m/min) for millimeter-precise positioning. Minimal hook drift: Due to a special drum geometry, the hook travels almost exactly vertically – with almost no lateral displacement during lifting/lowering. Long service life: CXT design for maximum hook height; industrial class FEM 2m / ISO M5. Including original Konecranes weather & impact protection: Solid protection plates to protect the trolleys. Condition & safety note: The equipment operated perfectly until it was dismantled in 2022 and is securely fastened to pallets. The acceptance inspection before re-commissioning is the responsibility of the buyer. Collection & transport: Self-collection is preferred (forklift for loading available on site). Alternatively, shipping by a forwarding agent for an additional charge.

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225 (lift2move) Serial No. 19153-HD, Year of manufacture 2010 Type No. Rated load capacity 225 kg Lifting stroke 1770 mm Bjdpeflt Egjfx Afmelp Lifting height 2350 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting arm 400 mm Chassis length 1130 mm Ground clearance 90 mm Underrun length 600 mm Chassis design (front / rear) Ø 80 / 150 mm (2 fixed / 2 swivel casters) Overall length 1130 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually movable, swivel casters with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 at a distance of 100-120-100 mm Mounted lifting attachment: Quadruple lifting fork, Expresso type, load capacity of the lifting attachment 40 kg - Lifting attachment can be swivelled by 90° by hand (can only be locked in the 0° position) - Lifting attachment can be moved laterally by +-100 mm on linear guide (locking only in the center) - Width between the support arms 320 mm - Height between the support arms (height can be locked at) 365 / 400 / 450 mm (max. opening width without locking hole 510 mm) - Depth between the support arms 150 mm to the stop bolt / 300 mm maximum Total weight 100 kg Good condition

Condition: excellent (used), Splash guard Diameter 510 mm Height 100 mm Bledpfx Aefm Tp Ssfmep Diameter of centering flange 90 mm Thread pitch 5.2 mm Weight 68 kg

Condition: used, Year of construction: 2003, Technical details: throat: 625 mm number of strokes: 34 Hub/min Bsdpfeu Icl Rsx Afmslp Punching capacity: 95 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Operation by foot switch Some accessories available. *

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: Blsdpsu Icmhofx Afmjp -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, Autotherm ATK 2000 cooling system, 20.5 kW cooling system in a 20-foot container Technical data - Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) - Nominal power: 20.5 (31.5) kW - Nominal current: 50 (71) A - Supply line fuse: 80 A Mechanical data - Dimensions: (W x L x H) 2430 x 6800 x 4350 mm - Weight: 4800 kg - Supply: Flange SDIN2633 DIN100 PN16 - Return: Flange SDIN2633 DIN100 PN16 - Overflow / Drain: 2" internal thread - Well water inlet: 2" internal thread - Well water outlet: 2" internal thread - Adiabatic inlet: 3/4" internal thread - Filling: manual 3/4" internal thread Water circuit - Heat transfer fluid: Water/glycol (90 % / 10 %) - Flow pressure: max. 10.6 bar - Tank volume: 4000 liters Free cooling circuit - Pump type: Grundfos CR 45-1-1 AFAE-EUUE - Delivery pressure: ... 2.15 bar - Flow rate: 58 m³/h Consumer circuit - Pump type: (Pressure boosting system) Grundfos Hydro 2000 ME 2 CRE 32-6 AFAE-EUUE - Delivery pressure: max. 10.6 bar - Flow rate: max. 40 m³/h 20-foot container AIS-DSC-22-28 External dimensions mm (L x W x H): 6,058 x 2,438 x 2,591 Internal dimensions mm (L x W x H): 5,898 x 2,352 x 2,390 Usable area inside m²: 13.88 Compact control Compact Control 2000 ME. Compact microprocessor control for stepless and cascade control of pumps with MGE motors and integrated frequency inverter for demand-dependent, energy-optimized operation of multi-pump systems. With automatic switching on and off of the individual speed-controlled pumps via a digital controller specially developed for centrifugal pumps. Bedpfxjuzhcuj Afmjlp Grundfos R100 infrared handheld device and diagnostic unit: for commissioning, data monitoring, reading error messages and configuring Grundfos pumps. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Technical details: faceplate diameter: 785 mm revolution per minute: 4,5 - 180 (Planscheibe) U/min Speed of boring spindles: 4,5 - 900 U/min. tool taper: SK50 weight of the machine ca.: 3,7 t space requirements of the machine approx.: 3,6x1,3x1,6 m spare part for a table type Boring and Milling Machine WMW BFT 130 with with headstock incomplete (as it can be seen on the picture!!) - diameter facing of a flange:0-1400mm - diameter for drilling: max. 800mm - diameter at face turning: 0-1400mm - spindle diameter: 130mm Bsdpfx Aou Nk Ehsfmslp - drilling depth: 1000mm *

Condition: used, Technical details: diameter: 250 mm Blsdpfx Aju Nla Hefmop passage: Ø 80,0 mm width: 80 mm weight of the machine approx.: 18,0 kg dimensions: Ø 250 x B: 112 mm three jaw chuck made of steel flange intake Ø 210mm with 3 pcs drill hole M12x44 incl. 3 set of 3 jaws *

Condition: used, Technical details: diameter: 250 mm passage: Ø 80 mm width: 75 mm weight of the machine approx.: 19,0 kg dimensions L x W x H: Ø 250 x B: 105 mm 4-jaws lathe chuck made of steel pitch circle diameter 228 mm, with drill holes 3x M12x40 mm, flange intake Ø 200 x 5mm clamping jaws adjustment via chick key, clamping area approx. Ø 6 - 160mm top used condition Bsdpfsu Nlc Ijx Afmolp *

Condition: used, Technical details: diameter: 250 mm passage: 80 mm width: 80 mm weight of the machine approx.: 23 kg dimension L-W-H: Ø 250 x 130 mm 4 jaw chuck with flange - width of the main body 80mm - with clamping jaws for internal /external - flange size Ø 250 x 18 mm, thread 4 x M16 ; pitch circle of the bolts = Ø 170 mm Bsdpfju Nlfiex Afmjlp Other 3- and 4-jaw chucks and face plates in stock. Please inquire! *

Condition: used, Technical details: Blsdju Nln Djpfx Afmop diameter: 200 mm passage: 50 mm width: 65 mm weight of the machine approx.: 45 kg stationary vice SSH 200 Power chuck, hydraulic Features: Chuck flange Ø 280 x 17mm with clamping groove 4x / 18x30mm base flange Ø 290x30mm flange mounting Ø 140x10mm 20 set of different jaws *

Condition: used, Technical details: diameter of piston: Ø 160 mm weight: 200 kg dimensions: 0,6 x Ø 0,3 m draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm Blodpeu Nurfofx Afmjp flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diameter 118mm hydraulic connection 2x 1 inch *

Condition: used, Technical details: weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Bjdpju N D S Uofx Afmelp Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Condition: used, Technical details: faceplate diameter: 900 mm Bljdpfju N E A Ujx Afmop width: 120 mm max. passage: Ø 140 mm weight: 330 kg Equipment: -4x clamping claws Flange mounting: -Ø inside: 410mm continuous x depth: 50mm -12x clamping holes Ø 26mm, pitch circle Ø 460mm *

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Salami, Double hydraulic pump Blodjvvr T Nepfx Afmop -Type: 2PB6.2/1PB2S-B03B2 -Flange/shaft: see photo, square 8 x 18 mm -Number: 5x pumps available -Price: per piece -Dimensions: 175/80/H100 mm -Weight: 2.7 kg/piece

Condition: refurbished (used), 100 m³ / 100,000 l fire water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight: approx. 16,300 kg Material: Steel grade S 235 JRG 2 Underground tank for underground storage, single or double-walled, suitable for areas that can be walked or driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. New or used, immediately available! The container has been emptied, cleaned, overhauled, and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319, design B, without a gauging port. Bodpfxjhh Suhs Afmelp - Ventilation flange stub with a cap, overall length approx. 1,300 mm, suitable for 800 mm soil covering and 500 mm above the ground. - Externally coated with bitumen for protection. - On request, we can coat the tank with an internal coating based on bitumen or epoxy resin (against corrosion). - It is also possible to line the container with a plastic inner liner. A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will promptly receive the exact freight costs. Inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de We can accept and purchase tanks/containers of all types; please contact us for details. We also have the following sizes in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Condition: excellent (used), Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 0.6 kg/dm³ Volume: 100,000 liters Available quantity: 4 Diameter: approx. 3,500 mm Cylindrical height: approx. 9,900 mm Overall height: approx. 12,500 mm (+ 1,100 mm roof edge railing) Material: AlMg3 Bulk density: 0.6 kg/dm³ Roof slope of the upper section: 15° Equipment and connections: In the upper section: 1 x access and ventilation opening DN 600 with cover 1 x ventilation opening with cap 2 x flange DN 100 1 x block flange DN 50 1 x roof edge railing with handrail 2 x crane lugs Blodpfxjipyq Ns Afmsp On the shell: 1 x access door 850 x 2000 mm with ventilation slots 6 x pipe supports for filling pipe (without filling pipe) 1 x block flange DN 50 Various pipe penetrations in the area of the lower base ring The silo ends at the bottom in a 90° cone with flange DN 200 (discharge height: 1,000 mm). Additional cost: Two of the silos have a two-section ladder with fall protection (including 1 rest platform). The currently connected measuring and control technology is included in the above offer. However, no guarantee is given for its functionality! Please note that the two silos differ slightly in their connections and their positions. Otherwise, as per the images and drawing.

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides powered Machine offered as a synchronized set or individually Protec turning device / positioner Syncrolift Double column, wireless and manual hand remote control Column adjustment electrically driven on both sides Load capacity 10,000 kg, 360° rotation Minimum working height: 800 mm Maximum working height: 1700 mm Speed: 0.5 rpm Clamping plate diameter: 900 mm Bedpfex Tcm Tsx Afmelp Rotating drive: 2 x 2.2 kW Torque: 18,950 Nm Machine is also available individually as Mono model (more affordable) Optional with articulated flange (Cardan flange)

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. Blodpfx Aoz Ix Ukjfmep It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. Bledpoz Nhliefx Afmjp The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Year of construction: 2022, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21-120004/A, These are two silos with ATEX certification and a volume of 15 m³, designed for handling difficult, lightweight bulk materials with a density of up to 300 kg/m³, or for lower filling levels with higher densities. The silos are fully equipped with a filter at the silo head and a discharge screw at the outlet, also equipped with a filter and a rotary valve. Bedpjz Nkt Njfx Afmslp The special feature lies within – a screw conveyor running along the bottom, rotating slowly to keep the material moving. Filter cartridges are included in the scope of supply. Interfaces: Filling – Flange at the silo Discharge – Conveyor screw with filter and rotary valve These are two silos – the package price is 15% lower than the stated individual price of a single silo.