Used Felder Kombi 731 S for sale (129)

Condition: good (used), For sale is a mortising drilling carriage suitable for Felder machines from model year 1992 onwards. The drilling carriage is in good condition and has been reconditioned and inspected by our specialist staff. (Fully functional) Technical data: - Incl. coupling and drive unit Todpfx Ahjxzglgjuef - With ADAPTER for SERIES 6 / 7 - Drilling height adjustment range: 135 mm - Drilling length: 250 mm - Drilling depth: 155 mm The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: pedestal drill, column drilling machine, drill Reference: R-D1618

Condition: like new (used), Year of construction: 2020, operating hours: 210 h, i speak english ,romanian, greek Tjdpfx Aheiqywleuof

Condition: used, Year of construction: 2012, 1 edge sanding machine, manufacturer Felder, model FS 900, serial no. FS01.07.12, year of manufacture 2012, 4-roller feed unit type F 48, internal no. I440047 Tsdpfjxzn Ayox Ahuef

Condition: good (used), Year of construction: 1997, functionality: fully functional, table length: 1,300 mm, table width: 310 mm, Types: KF-7, machine no.: 79-03/170-97, year of manufacture: 1997, lower spindle and circular saw blade 45°C, feed unit Magg type: 13720501, power supply: 3/400V 750Hz/5.3 Amp Tsdexxacgspfx Ahusf

Condition: excellent (used), Felder G360 Edge Bander, Pre-milling cutters, Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finishing saws, Top and bottom milling unit R1 – R2, Profile scraper, Tedpexy Iwbsfx Ahusf Polishing unit Edge thickness: 0.4–3 mm, Max. panel height: 45 mm, Feed speed: 7 m/min, Total power requirement: 2.8 kW, Machine length with table: 290 cm, without: 240 cm.

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Spindle diameter: 30 mm Todpfx Aexycy Rohusf 3 spindle speeds, adjustable via belt Spindle can be lowered below table level and removed Spindle moulder motor power: 3 kW Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: excellent (used), For sale is a used Felder K700 P panel saw with a cutting width of 800 mm. The machine is in very good condition and has been refurbished and inspected by our specialist staff. (Fully functional) Technical data: Tjdpfx Ahjxzgd Ajuof - Saw blade tiltable 90-45° - Sliding table 2000 mm - Short mitre fence 1100 mm - Extension table with mitre fence 2600 mm - Cutting width 800 mm with fine adjustment - Cutting height 102 mm (Saw blade D=315mm) - 5.5 HP (4kW) motor, 400 Volt - Machine No. 80-10/212-01 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: Saw, circular saw, panel saw, panel Reference: R-N44KA

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. All repairs and maintenance carried out by a qualified service provider. Loading is provided. Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Tsdpfxsxg Ehdo Ahujf Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Price shown is net. For any questions please contact us by phone or email.

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Todsxl Dw Uspfx Ahujf Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Tsdpoxlt Shsfx Ahusf Extraction port for spindle moulder: 120 mm

Condition: used, Year of construction: 2022, 0,4 - 5 mm Workingpiece thickness from to 10 - 45 mm Feed speed 8 m/min. Tjdpfx Ahexpn Ufsujf

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; - Three-phase 400V/50Hz/20HP self-braking motor; - Horizontal transport pallet Todpfxexzu Nme Ahujf FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive

Condition: like new (used), For sale is a used Felder K700 panel saw with a cutting width of 800 mm. The machine was only briefly in use for demonstration purposes at our facility. Therefore, it can be considered as new and comes with full warranty/guarantee. Technical specifications: - Tilting circular saw 90-45° - Sliding table 1300 mm - Mitre fence 1100 mm - Cutting width 800 mm - 4 kW (5.5 HP) motor, 400 Volt - Machine no. 425.04.050.25 The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, panel Todpsxzd Aijfx Ahuof Reference: R-N1194

Condition: excellent (used), Felder F 700 M Shaper (Spindle Moulder) Electric spindle height adjustment and manual angle adjustment from 0 to +45 degrees Interchangeable 30 mm spindle Long tables: 215 cm 4 spindle speeds 5.5 kW motor Tsdpfx Ahoxyfrpsuef Spindle lock Brake Very good condition, machine fully checked and ready for operation.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,000 h, functionality: fully functional, Equipment: type plate available, X-motion plus control: Tsdpfoxx Aiiox Ahuef • with rotatable 15" smartouch monitor • unlimited memory space for operator-defined work programs • precise adjustment of distance parameters • simple and self-explanatory symbols for units and functions • glue temperature adjustment, automatic glue temperature reduction in standby mode • selection of units, precise adjustment of position-controlled and motor-set units (adjustment accuracy 1/100 mm) from the control panel • optimization of edge overhang at the front and rear of panels during pre-trimming • clear error messages FORMAT 4 is a brand of FELDER KG

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Application Types Tsdpfxexnd Ile Ahuef Edge Banding

Condition: good (used), Year of construction: 2010, Fully functional Year of manufacture: 2010 Radius scraper blade Todpfx Ahjxqgr Seujf Flat scraper blade Cleaning unit Jointing cutter up to 3 mm Nesting milling unit Pneumatic feed stop Polishing Machine no.: 200.07.011.10

Condition: excellent (used), Year of construction: 2023, Single-sided edge banding machine Make: Felder / Format 4 Model: Tempora 45.03 L Year of manufacture: 2023 Edge bander with pre-milling unit Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 45 mm Pre-milling unit Gluing station for PUR/EVA End trimming saw unit Flush/radius milling unit Corner rounding unit Tedpfx Ahsxrbkfeuef Cleaning spray unit Buffing unit Control unit: Smarttouch 15" touchscreen Set-up length approx. 4300 mm Total connected load: 14.5 kW Voltage: 400 V, 50 Hz, 3-phase, 22.8 A

Condition: like new (used), Year of construction: 2016, Demonstration Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, featuring a maximum air flow rate of 2300 m³/h. The extraction unit is in like-new condition, has been inspected and refurbished by our qualified technicians. Technical data: - H3 dust tested - Extraction connection diameter: 200 mm - Automatic chip shaker - Steel impeller Tjdpfxexxkr So Ahujf - Max. air flow rate: 2300 m³/h - incl. briquette press FBP 60 (50-70 kg/h) - Year of manufacture: 2016 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL, briquette press, briquetting Reference: R-A0117

Condition: excellent (used), Thickness planer Felder D963 Tjdpfexdmu Tsx Ahusf Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Feed with adjustable speed, 7.3 kW motor, Machine in very good condition.

Condition: used, Used machine Data to follow Todpfx Ahjxllw Neusf

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: Tsdpfx Ahjxxi T Ujusf - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: used, Felder AD 741 Surface and Thickness Planer Spiral cutter block Main motor 4 kW, Surface planer table length 2000 mm, Tjdpfexxavmsx Ahuef Planing width 410 mm, Thicknessing capacity height 230 mm, 1 feed speed, Manual thickness table adjustment with digital height indicator Machine ready for operation, quiet

Condition: like new (used), Year of construction: 2021, For sale is an almost new Felder thickness planer D9-51 with a planing height of up to 254 mm. The machine is on display in our showroom and is therefore in like-new condition. Technical data: - Planing width: 510 mm - 4-knife cutterhead system Tsdpfx Ahsxxi Rteuof - Thicknessing height: 3-254 mm - Thickness table length: 900 mm - Max. stock removal: 8 mm - Electrically adjustable thicknessing table with LED Power Drive display - Infinitely variable feed speed from 4-16 m/min - 7.5 HP (5.5 kW) motor - Star-delta starter - Exhibition machine, like new - Year of manufacture: 2021 The planer is located in A-5431 Kuchl and can be viewed at any time during our business hours. Subject to prior sale!

Condition: excellent (used), Year of construction: 2024, For sale is a Felder AF-22 extraction unit with a maximum air volume flow of 3100 m³/h. The extraction unit is in very good condition and has been checked and serviced by our specialist staff. Technical specifications: - Extraction capacity: 3100 m³/h - Max. negative pressure: 2510 Pa - Extraction connection Ø 160 mm - Chip container volume: 2 x 200 liters - Incl. dust filter cartridge + shaker device - Year of manufacture: 2024 - Motor power: 3 kW The extraction unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: extraction unit, dust extraction, filter, cartridge filter Tedpfxjxxiy Uo Ahusf Reference: R-E28WO