Used Elektromotor 30 Kw 1465 U Min B3 for sale (82,302)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 4 Aerzen VM 30 Screw Compressors Previously used for pneumatic unloading of railway wagons. Manufacturer: Aerzen Model: VM 30 Volume flow rate: 27.17 m³/h (1630.2 m³/min) Pressure increase: 2.75 bar Compressor speed: 12,874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via a shell-and-tube heat exchanger. Year of manufacture: 1998 Dodpfxorkpp He Ag Deur Dimensions: Length: 2,800 mm Width: 1,150 mm Height: 1,770 mm Weight: approx. 2,750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Compressor 4: 28,973 hours Regular servicing was carried out by an authorized service company!! Units have not been in operation since 2019. Since then, they have been stored in a dry, heated location.

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder with flow regulator, stroke 30 mm -Piston rod: Ø 20 mm -Hole: Ø 14 mm Duodpov N D N Aofx Ag Djr -Dimensions: 420/60/H190 mm -Weight: 3.8 kg

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinder short-stroke heavy-duty cylinder double-acting -Stroke: 30 mm -Piston rod: Ø 32 mm -Dimensions: Ø 70 x 165 mm -Weight: 3.6 kg Dujdpfxswuqhzj Ag Dsr

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder Dodpfx Aowzigisg Dsur -Manufacturer: WV, clamping cylinder stroke 30 mm -Type: 25-160 WS 08110 -Shaft Ø 12 mm -Number: 1x clamping cylinder available -Dimensions: Ø 50 x 128 mm -Weight: 1.4 kg

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinders short-stroke heavy-duty cylinders -Stroke: 30 mm Duedjwt Nv Uspfx Ag Dor -Piston rod: Ø 57 mm -Dimensions: 103/85/H105 mm -Weight: 4,3 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hawe, hydraulic cylinder type PS 30/20 Z1143 -Stroke: 300 mm -Piston rod: Ø 20 mm -Hole: Ø 20 mm / distance 530 mm -Number: 1x cylinder available -Dimensions: Ø 62 x 570 mm -Weight: 4.9 kg Dedpfxjunn Hrs Ag Dour

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinder short-stroke heavy-duty cylinder -Stroke: 30 mm -Piston rod: Ø 65 mm -Dimensions: 165/100/H100 mm -Weight: 4.1 kg Dedewxtx Dopfx Ag Dour

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder Duodpfx Agswzib Hs Dsr -Manufacturer: WMW, clamping cylinder stroke 30 mm -Type: 40 30-7311 -Shaft Ø 20 mm -Number: 4x clamping cylinders available -Price: per piece -Dimensions: Ø 55 x 160 mm -Weight: 1.8 kg/piece

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: KCS 71.16-2 D -Power: 4.4/6.6 kW Duedpob Uhp Isfx Ag Dsr -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/960/H600 mm -Weight: 470 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 30 mm Djdpfx Ajgu Exlog Dsur - Piston rod: Ø 30 mm -Mounting holes: Ø25 x 70 mm / Ø13 x 10/16/10 mm -Cylinder: outside Ø 90 mm -Number: 2x cylinders available -Price per piece -Dimensions: 390/140 / H100 mm -Weight: 9.7 kg

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors Dodpfx Aob Uhpwog Deur -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1000/420/H655 mm -Weight: 140 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership Dedpfeb Uhrtjx Ag Djur -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1020/400/H700 mm -Weight: 110 kg

Condition: used, The resonator of a Trumpf laser resonator is for sale here in good, used condition, as can be seen in the pictures. Dusdpfxoyfnb Sj Ag Der Technical data: • Manufacturer: Trumpf • Laser system: L-3050 (6kW, built in 2005) Shipping available on request (also internationally) You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2011, operating hours: 49,500 h, laser type: CO₂ laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, TRUMPF TruLaser 3030 (L20) – 4 kW Regularly serviced by TRUMPF (last service: Oct. 2025) MAJOR RESONATOR SERVICE in 2023, quartz tubes and optics fully replaced! New transmitter tube at delivery! TECHNICAL DATA: Manufacturer: TRUMPF Model: TruLaser 3030 (L20) – 4 kW Year of manufacture: 2011 Working area: 3,000 x 1,500 x 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4,000 Watts Max. sheet thickness, mild steel: 20 mm Max. sheet thickness, stainless steel: 15 mm Max. sheet thickness, aluminium: 10 mm Operating hours: NC on: approx. 49,500 h Beam on: approx. 28,400 h - Max. workpiece weight approx.: 900 kg - Max. simultaneous speed approx.: 140 m/min - Smallest programmable increment approx.: 0.01 mm - Positioning deviation: +/- 0.05 mm - Mean positioning scatter: +/- 0.03 mm - Space requirements approx.: L 9,300 x W 4,600 x H 2,200 mm - Weight approx.: 12,000 kg Standard Equipment: Dsdpfx Aeyiu T Neg Dour Machine Equipment - Fully enclosed machine frame with integrated laser unit - Motion system for ultra-precise processing - Torque drive combined with linear direct drives - Enclosed beam guidance - Chiller unit - Automatic pallet changer - Longitudinal conveyor for small parts/scrap - Work area illumination - Positioning laser diode - PierceLine - PlasmaLine - Shop floor programming TRUMPF Laser - CO2 laser TruFlow 3200 with maintenance-friendly turbo radial blower - High-frequency excitation - Laser control TASC 3 - Laser power management - Laser logbook function Cutting Head - Single-head cutting strategy - Laser cutting head with 250 mm lens - Universal quick-change cutting head system (UTI) with bus interface - FocusLine - LensLine - ControlLine: height control and sheet edge detection Control System - Integrated technology data - Ergonomic operator panel with 17" color touchscreen - Easy operation - Production planning - Programmable cutting gas/pressure selection - Automatic shut-off system - SprintLine - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice, diagnostic functions Data Transfer - USB interface - RJ-45 network connection Safety - CE marking - Safety light barriers - Laser monitoring system - Multi-chamber extraction and compact dust collection system - Machine enclosure with polycarbonate windows (Makrolon) ADVANCED EQUIPMENT: - CO2 Laser TruFlow 4000 including NitroLine, beam path ventilation with N2

Condition: good (used), Year of construction: 2020, Control cabinet cooling unit, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler Djdpfex Nfktjx Ag Dsur -Manufacturer: Rittal, wall-mounted cooling unit Blue e -Type: SK 3187930 -Cooling capacity: 2.6 kW -Number: 2x cooling unit available -Price: per piece -Dimensions: 450/250/H1600 mm -Weight: 56 kg/pc.

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Dsdpfx Agsxxa Uce Dsur

Condition: ready for operation (used), Indramat 2G 1125 IR=B3-3302 DC servo motor SN: 70701, professionally completely overhauled and tested, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dujdpfstwhrzox Ag Der

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinders short-stroke heavy-duty cylinders -Stroke: 30 mm -Piston rod: Ø 140 mm -Dimensions: 240/200/H115 mm -Weight: 28 kg Dodpfx Agjwt Nv Ij Dour

Condition: new, Year of construction: 2026, Delivery time: immediately ex works. Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Connection cable with CEE plug - Mechanical feed for Z-axis - Including electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: right/left rotation TECHNICAL DATA Continuous/standard drilling capacity (mm): R3 - 30/35 (in E335/ST60) (200) Maximum thread cutting capacity: R3 = M30x3.5 Spindle taper MK III Drilling depth: 125 mm Throat: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Digital speed indicator Digital drilling depth indicator Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150–700 mm Spindle speeds, stepless: R3 (2-stage with intermediate shaft) 0–4,000 rpm Accessory coolant system (€605) - Separate tank - Capacity: max. 15 l - Pump output: max. 13.4 l/min Accessory drilling package 5 (€855) - Vice [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3–16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door, including packaging Duedpfjx Hh Dwsx Ag Djr NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DEALER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST YOUR OFFER TODAY!

Condition: new, Year of construction: 2024, Thread cutting device OLED display LED lighting Continuous/normal drilling performance (mm) - R1 27/32 mm - R2 25/30 mm Thread cutting performance max. - R1 M34x3 - R2 M20x2.5 Spindle MK III Drilling depth (mm) 125 Throw (mm) 300 Column diameter (mm) 125 Usable table area (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,140 mm Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 370 Optional drilling package 5 (€ 855.00 plus VAT) Djdpfx Agjtt Af Ro Dsur - Vice [felix] 2.0 150 - Taper mandrel MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Djdpfx Agjx Dxq Ho Deur

Condition: ready for operation (used), Bosch SD-B3-095.030-10,000 brushless servo motor SN, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Dedsi D E Snjpfx Ag Dsur

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HTAT055HE - 2200389046, cooling capacity: 111 kW (150.92 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,536 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 19 m³/h, pump pressure: 1.26 bar, total width: 1,110 mm, total length: 3,415 mm, total height: 2,270 mm, warranty duration: 3 months, Equipment: type plate available, Heat pump, air-cooled chiller Manufacturer: MTA S.p.A. Model: Taurus HTAT 055/HE – 130 / 111 kW The Taurus HTAT 055/HE units are compact heat pumps/chiller sets designed for outdoor installation, including hydronic kit (200 l tank + P15 pump) for low ambient temperatures down to -20°C, equipped with electronic fan speed control (EC fans). Heating capacity (kW): 130 Heating water outlet/inlet temperature: 45 / 40°C Flow rate (m³/h): 22.5 Available pump pressure (bar): 1.03 Ambient temperature (°C): +7 Cooling capacity (kW): 111 Chilled water outlet/inlet temperature: 7 / 12°C Flow rate (m³/h): 19 Available pump pressure (bar): 1.26 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power input (kW): 60 Max. current (A): 98 Starting current (A): 312 Protection class: IP54 Dsdpfx Aex Itfcjg Dour Dimensions: Length (mm): 3,415, Width (mm): 1,110, Height (mm): 2,270 Weight (kg): 1,536 Connection: Rp 2 1/2" Serial No.: 2200389046 Year of manufacture: 2022 Condition: Cosmetic: 2, Technical: OK Used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: new, Year of construction: 2025, Standard equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electric. Protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Including electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: right-left TECHNICAL DATA Continuous/normal drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Throw: 300 mm Column diameter: 125 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table: 150-700 mm Infinitely variable spindle speeds: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with gear) 0-4,000 rpm Optional R1 or R2 without price surcharge Price surcharge R3: € 1,750 Accessories coolant system (€ 605) - separate container - filling quantity: max. 15 l - delivery rate max. 13.4 l/min Accessories drilling package 5 (€ 855) - vice [felix] 2.0 150 - taper mandrel MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) GUARANTEE: 3 years (single-shift operation) DELIVERY: free delivery including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! Duodpjfmh Tljfx Ag Der ASK FOR A QUOTE!

Condition: excellent (used), functionality: fully functional, operating hours: 58,000 h, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery Djdpfx Agjrgaw He Dsur