Used Drying Cabinet for sale (6,246)

Condition: used, Battery charging cabinet, battery, emergency power battery, emergency power battery, emergency power system, power supply system Bledofff Npopfx Afmjp -Cabinet made of: stainless steel with 24 batteries a 12 V 7.2 Ah -Made for: Senvion wind turbines -Type: battery cabinet 2; pitch system; 3.XM EBC Hz NCV -Connection: 230 V AC/328 V DC/24 V DC -Price: per piece -Number: 2 pieces -Dimensions: 1550/550/H320 mm -Weight: 151 kg/piece

Condition: good (used), Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet Bjdsfgyf Dopfx Afmelp -Distribution box made of: VA -Dimensions: 410 x 400 mm -Depth: 165 mm -Weight: 10.5 kg

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Blodpfjfzb Nisx Afmop Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel Bjdpfefz U Hvox Afmslp The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: refurbished (used), Year of construction: 2020, Dear Customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Bodpfx Afjfr T Emomslp TSWi 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H Fan is integrated into the wall Airflow: 10,800 m³/h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: paper filter + Paint stop filter mat Clamping rail (+180.00 EUR net) Options/Additional cost for: Transition from square to round: 150.00 EUR net Paint stop filter mat clamping rail: 180.00 EUR net Side guide plates with hinges: 590.00 EUR net Images may vary. We would also be happy to offer you complete spray booths with air supply system, heat exchanger, air supply ceiling, piping, etc. Simply contact us.

Condition: new, Year of construction: 2026, Rotary dry vane vacuum pump model MVS-V250. Available in stock. Completely new with 12 months warranty. Nominal flow: 250 m3 / h at 50Hz. Final vacuum: 200 mbar Blodpfjftzviex Afmop Any clarification, do not hesitate to contact us.

Condition: ready for operation (used), Heraeus UT 6060 Heating Oven No. 415 Max. 300°C Dimensions: External: 750mm x 730mm x 580mm (L x W x H) Internal: 400mm x 350mm x 380mm (L x W x H) Further technical data can be found in the images. You are welcome to come and inspect the oven. You will receive a proper invoice. Bodpfxolt Ut Rs Afmjlp For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -stable tool cabinet -2x shelves: extendable Bodpfxed Nc Auo Afmslp -Dimensions: 500/600/H830 mm -Weight: 36 kg

Year of construction: 2016, condition: good (used), Thermo container, thermo cabinet, thermo tray carrier, Blanco Year of manufacture 2016 – in very good optical condition We are offering a used tray transport cart / plate warming cabinet / food warming cabinet: 2 folding doors – see photos Manufacturer: BLANCO Year of manufacture approx. 2016 / various cabinets in stock Designation: TTW 2x12 Weight: approx. 85 kg in total Tray insertion slots: 2x12 Large roller wheels, 2 of which are lockable (easily operated with the foot) Also ideal for use as a workshop cabinet; can also be placed outdoors New price at other manufacturers: €4,200 Dimensions: Height 178 cm Width 100 cm Depth 70 cm Various transport carts and workshop cabinets in stock Temperature can be maintained well due to the thermal walls Collection from warehouse in 47441 Moers Inspection is expressly offered. Other equipment in stock General: We are offering items from various company liquidations here, which we describe as best as possible and provide informative photos. No further information can be provided on the item. We offer the possibility of inspection on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by prior telephone arrangement. If required, the item can be taken away immediately. Unless explicitly stated, this offer refers to used goods (from company liquidation). Items have been visually inspected and are in good condition. Please note the photos Functionality tested – result: ok. All offers are ex warehouse 47441 Moers. Bsdpsiwxygsfx Afmslp If you would like to have the item shipped, please contact us to discuss packaging and shipping costs. All dimensions are approximate. Photos are similar.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Bedpfszg Dx Uex Afmjlp Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: excellent (used), Available quantity: 10 units. High-quality control cabinet cooler from Rittal, part of the TopTherm series, in very good condition (used). This unit is suitable for reliable air conditioning and cooling of control cabinets and industrial equipment. Robust industrial design with a high degree of protection and powerful cooling technology. Manufacturer: Rittal Model: TopTherm SK 3304540 Device type: Control cabinet cooler Condition: very good, used Date of manufacture: 10/2018 Serial number: 2018K000166679 Voltage: 400 V / 50 Hz / 3~ Alternative voltage: 460 V / 60 Hz / 3~ Rated current: 2.2 A Starting current: 11.5 A Blodezgf Haepfx Afmjp Circuit breaker: 6.3 – 10 A Power consumption: 0.64 kW Total cooling capacity DIN EN 14511: 1.10 kW Sensible cooling capacity DIN EN 14511: 0.94 kW EER L35 L35: 1.72 Refrigerant: R134a Refrigerant charge: 325 g GWP R134a: 1430 CO2e: 0.46 t Operating temperature range: 10 °C to 55 °C Degree of protection internal circuit: IP54 Degree of protection external circuit: IP34 Weight: 40 kg Hermetically sealed: Yes Leakage tested according to EN-378-2

Condition: used, functionality: fully functional, Available quantity: 5 units Functionality tested; item originates from the dismantling of equipment from an automotive supplier. Bjdpfszgf H Tsx Afmslp Manufacturer: Rittal GmbH & Co. KG Model: SK 3304540 Type: TopTherm Blue e wall-mounted cooling unit Cooling capacity: 0.3 – 4.0 kW Voltage: 230 V AC Energy efficiency: Blue e technology with EC fans Mounting: Wall-mounted Function: Control cabinet cooling for temperature stabilization Refrigerant: R134a

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Blsdpfx Ajy Ny U Tefmep

Condition: used, Wine climate cabinet with 3 zones Manufacturer: Eurocave Height: 194 cm Width: 97 cm Depth: 72 cm Bljdoy Rm Upspfx Afmsp

Condition: excellent (used), Control cabinet Manufacturer: ETA Type: EMOX type 1.12 Size: 60x40 cm, height: 190 cm Contents – main components: Bodpfx Aeywxxgsfmjlp 12 pieces power supply: Siemens sitop PSU100L We have several control cabinets in stock, with various equipment or also empty.

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker Bjdpfx Ajzf Ehnsfmolp -Tool cabinet: Steel cabinet, solid construction with 8 drawers -Width: 420 mm -Depth: 625 mm -Height: 1350 mm -Drawers: See photos for layout/height -Door: lockable, without key -Weight: 74 kg

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm Bsdpfx Aozf N Niefmslp 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, Year of construction: 2016, with a new conveyor belt. Functional Description(Source: Excerpt from the operating instructions) This 3D UV dryer is equipped with 2 UV lamps from aboveand 1 UV lamp from below, each with a power outputof 150 W per cm of lamp length (electrode spacing).The UV output can be adjusted from 50–100%.The output of the bottom lamp can be adjusted drying tunnel features automatic conveyor conveyor speed is continuously adjustable (1–20 m/min).The automatic material detection (which can be turned on or off) causesthe UV output to switch to standby mode (≥15% UV output)if no material passes the sensor for more than one minute. Bedpezf N Rgjfx Afmelp Technical Specifications: - Manufacturer: Printworld- Model: 3D - PUVD- Lamp output: 150 W/cm- Year of manufacture: 2016- Working width: max. 1,300 mm- Number of lamps:2 lamps from above1 lamp from below- UV power control:UV lamps are individually adjustable (50%–100%)- Reflector: Printworld Multifocal reflector- Conveyor belt transport width: 1,400 mm- Total length: 4.5 m- Conveyor belt speed: 1–20 m/min- Max. part height: max. 60 mm- Conveyor belt type:PTFE glass fiber fabric conveyor belt- Conveyor speed control:Infinitely variable with digital control and monitoring- Conveyor drive: Stepper motor with variable conveyorspeed and digital control and monitoring- Energy savings: Automatic standby modewith power reduction of approx. 10%- Operation/control: Schneider Modicon M258 LogicController processor with Magelis color touchscreen- Infeed height: 850 – 900 mm- Outfeed height: 850 – 900 mm- Electrical connection: 400 V~, 50 Hz, 3-phase +N +PE- Current: 135 A- Location: from stock

Condition: good (used), Approx. 15 units of 5-section wardrobe with bench, C+P – used: Bodpfxozqzpls Afmolp Price per unit: €500 (net), disassembled, packed, and loaded at the location! Manufacturer: C+P Möbelsysteme Type: S 3000 Evolo Year of manufacture: unknown Dimensions: H 1850 x W 1480 x D 500/815 mm with 150 mm high feet and pre-assembled bench, bench slats made of beech, with integrated height adjustment, 5 compartments, compartment width 300 mm, 5 shortened doors, suspension on pivot bolts, safety swivel lock for padlock with lock protection. Condition: good Available: immediately Location: Leipzig

Condition: good (used), Drawer cabinet, Format, 9 drawers – used: Bljdpfxezp Rq As Afmsp Price ex works: €500.00 (net)! Item 1: Manufacturer: Format Type: unknown Year of manufacture: unknown Dimensions: approx. 80x70x100cm 9 drawers According to the manufacturer, 80 kg load capacity per drawer 88% extendable New price approx. €1,700.00 Condition: good Available: immediately Location: Leipzig

Condition: good (used), Drawer cabinet, Format, 8 drawers – used: Price ex works: €400.00 (net)! Item No. 2: Blsdpfx Ajzp Ru Ujfmep Manufacturer: Format Type: unknown Year of manufacture: unknown Dimensions: approx. 80x70x100cm 8 drawers Condition: good Available: immediately Location: Leipzig

Condition: used, Second-hand control cabinet, a Weinig Unicontrol 10, suitable for use as a source of spare parts or for building a new control cabinet. Blodpoztvt Djfx Afmsp Contents include, amongst other things: Siemens Simatic S5 Siemens EMG 45

Condition: used, Second-hand Weinig Unicontrol 6 control cabinet, suitable for use as a source of spare parts or for building a new control cabinet. Contents include, amongst other things: Hilger & Kern brake unit Bedpfeztvt Rex Afmslp Rathgeber ET 1000 transformer

Year of construction: 2016, condition: excellent (used), Painting booth Diana serie with horizontal ventilation Modern technology: Dust free operation paint overspray collection system Stable spraying temprature Bsdpfx Asygum Rsfmelp Control box with safety function Length:16000mm Width:6000mm Height:6000mm

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 Bljdpfx Afsyg H Dzomjp ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡