Used Dmu for sale (158)

Condition: excellent (used), Year of construction: 2012, CNC Control: Heidenhain TNC 620 Axes X-axis travel (mm): 500 Y-axis travel (mm): 450 Z-axis travel (mm): 400 C-axis indexing (degrees): 360° (0.001°) B-axis indexing (degrees): -5° to +110° (0.001°) Feed rates (m/min): 12 Rapid traverse (m/min): 12 Work Table Pallet dimensions (mm): ø630×500 Max. workpiece weight (kg): 200 Spindle Max. spindle speed (rpm): 10,000 Spindle drive power (kW): 9/13 (100% DC/40% DC) Tool System Gsdpfx Ameyzar Neueit Tool holder: SK-40 Number of tools in magazine: 16 Max. tool diameter (mm): With free adjacent pockets (mm): ø130 With adjacent pockets occupied (mm): ø80 Max. tool length (mm): 300 Max. tool weight (kg): 20 Signal beacon CE conformity Coolant gun Direct XYZ measuring system Probe Handwheel Tool measurement Machine operating hours: Power-on hours: 28,826 Spindle working hours: 14,423 Geometry and spindle in very good condition

Condition: good (used), Please read the technical specifications carefully. If the machine is of interest to you as an investment, we kindly ask that you provide full identification, including a correct phone number and email address, when requesting an offer. DECKEL Milling Machine Toolroom Milling Machine DMU 35 M 3 x 2 axes CNC Milling Machine With SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Travel distances (X/Y/Z): 350 x 240 x 340 mm Spindle speed, stepless: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Clamping bolt: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55 / 80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145 / 485 mm Godpfoxz Rdaex Amujit Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary axis range: 360 degrees Swivel range: degrees Total power consumption: kVA Weight: approx. 1,750 kg Technical data subject to change! Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox stages - Fully enclosed guard cabin with sliding door - Swiveling control panel - Coolant nozzles at the vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine light - Serial RS232C interface, LAN (RJ45) The machine is perfectly suited for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. Its outstanding universal capability is thanks to the additional manually operated rotary/swivel table, which allows 5-sided machining. Condition: Good to very good, from a vocational training center, see photos. Can be inspected under power.

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Gedpsx Dlf Rjfx Amusit B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Tool changer: 60 positions Accessories: Chip conveyor High-pressure coolant 40 bar (IKZ) Handwheel Heidenhain TS 642 probe

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Internal coolant supply • Chip conveyor Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes Gijdpfxox T Dgnj Amust

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430 MHaidenhain TNC 430 M, spindle speed (max.): 8,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2000, featuring a Heidenhain TNC 430 M control system and a manual swivel rotary table for versatile 5-axis machining. It has a spindle speed up to 8,000 rpm, tool holder SK 40, and rapid traverse rates of 12 m/min in X/Y/Z. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 50 T machine we have for sale. Contact us for more information. • Rapid traverse (X/Y/Z) 12 m/min • Machining capability: 5-axis machining via manual swivel/rotary table axes • Cooling system: External coolant supply; capacity 80 liters; coolant used Alusol SL 51 XBB • Tool system: Tool magazine with 16 tool positions Technical Specification Taper Size SK 40 Gedpfxsydk Npo Amuoit

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. Gsdpfox D Nwkex Amueit • Heidenhain TNC530 • 24 tool positions • SK-40 chuck • Spindle speed: 18,000 • measuring probe Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 1996, operating hours: 12,800 h, number of axes: 5, This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It features a Millplus control system with software version DV400, an external hydraulic unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 50V machine we have for sale. Contact us for more information about this machine. Additional equipment • Hainbuch Hydraulic Vise for BZI32 Collet Machine Benefits Technical Machine Benefits • Machine is operated with a motor encoder due to c-axis encoder currently defective. • Internal cooling: 40 bar • External hydraulic unit for clamping devices • Counterholder on the rotary table Godpfx Aex U Tinomueit • Rotary union on the table • Tool positions: 24 tool positions – 2 partially available (space is broken) • Measuring probe: renishaw – prepared Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2002, operating hours: 16,729 h, CNC Control: 3D Heidenhain Millplus 5 axes Giedpfxey Hx Hco Amust Travel X-axis (mm): 1250 Travel Y-axis (mm): 880 Travel Z-axis (mm): 800 C-axis indexing (degrees): 360° (0.001° increment) Feed rate (m/min): 40 Rapid traverse (m/min): 40 Max. spindle speed (rpm): 12,000 Spindle drive power (kW): 15/10 (40% duty cycle/continuous) Cooling Tank capacity (liters): 600 Tool system Tool holder: SK 50 Number of tools in magazine: 60 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Rinsing gun RENISHAW Accuracy package Internal cooling 40 bar Paper band filter Total power consumption (kVA): 55 Weight: 13,000 kg

Condition: good (used), Year of construction: 2002, Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axes Travel measuring system with correction Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement A lot of aluminum has been machined! Gijdpfx Amowglfxsujt

Condition: excellent (used), Year of construction: 2000, Controll HeidenHain 3D 430 Giedjgqbp Uopfx Amust Spindle Taper SK 40 Power on spindle13 kW CNC Automatic milling head / Gr.-91 to + 12 Grad X – Travel 630 mm Y – Travel 560 mm Z – Travel 560 mm Table Length x Width 1000 x 600 mm Table load 500 Kg Number off controlled axis 4 ATC tool changer 20 Spindle speeds / ranges 18000 Rpm

Condition: good (used), Year of construction: 2004, functionality: fully functional, Universal machining centre Deckel Maho DMU 50 M with Heidenhain TNC 310 CNC control. Swivel-rotary table, SK 40 spindle taper with hydraulic drawbar. In good working condition, can be inspected under power. Gsdpfx Ameytpy Eoueit

Condition: used, Year of construction: 2002, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 10,000 rpm, Universal machining center Machine type: DMG DMC 340 U Control: Heidenhain iTNC 530 Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 2,800 mm Y-axis: 3,400 mm Z-axis: 1,600 mm B-axis C-axis Rapid traverse: (X/Y/Z): 60 / 30 / 40 m/min. Swivel head Speed range: 10,000 rpm. Drive power: 44/32 kW Torque: 288 Nm Tool holder: HSK 100 Tool positions: 120 Tool diameter: 130 / 250 mm Tool length: 650 mm Tool weight: 30 kg NC rotary table: 2500 x 2000 Pallet system Number of pallets: 2 Pallet size: 2,500 x 2,000 mm Top table: D. 2,800 Features: Internal cooling (IKZ): bar Coolant tank: l Chip conveyor Godpfx Aex Uxc Tjmuoit Electronic handwheel Chip flushing gun

Condition: excellent (used), Year of construction: 1996, operating hours: 9,700 h, DMG Vertical Machining Center Model: DMU 50 V Year of manufacture: 1996 5 axis Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Spindle taper: BT 40 Spindle speed : 8,000 rpm Tools in magazine: 24 piece Control: Deckel Maho Mill Plus Spindle hours: 9700 Interface: RS-232 C Gijdpfx Aoyvzq Njmujt 30 tool holders

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Gsdpsxvrbiefx Amujit Width mm: 3500 Height mm: 3902

Condition: excellent (used), Year of construction: 2008, Deckel Maho DMG DMU 50 eVo linear Year: 2008 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 rpm Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center : 40 bar Tool system Tool holder: SK40 Giedey Ap D Dopfx Amuet Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Weight 5900 kgs Accessories/options: Chip conveyor Blum touch probe Blum Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Coolant tank with high pressure coolant pump, paper band filter system With tool holders, SK40 type, 25 pieces Full set of documentations Under power in our warehouse! Video available upon request!

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Gijdpfx Amsu Hf Ryoust Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2001, Manufacturer: DECKEL MAHO (DMG) Model: DMU 70 VL Year of Manufacture: 2001 Control Unit: HEIDENHAIN TNC 430 Machine Type: 5-Axis Universal Machining Center Working Range / Travels: X-axis: 710 mm Y-axis: 520 mm Z-axis: 520 mm B-axis (Swivel range): -10° / +95° (NC-controlled) C-axis (Rotary table): 360° (NC-controlled) Work Table: Table Type: NC Swivel-Rotary Table Clamping Surface: Ø 700 x 500 mm Max. Table Load: 350 kg Milling Spindle: Max. Spindle Speed: 12,000 RPM (Motor Spindle) Drive Power (40% / 100% ED): 15 kW / 10 kW Tool Taper: SK 40 (DIN 69871) Tool Changer: Magazine Positions: 30 slots Max. Tool Diameter: 80 mm / 160 mm (with empty adjacent pockets) Max. Tool Length: 315 mm Giedjyh Nm Sopfx Amuot Max. Tool Weight: 6 kg Feed Rates & Motion: Rapid Traverse (X/Y/Z): 30 m/min Max. Feed Rate: 20,000 mm/min Weight & Footprint: Machine Weight: approx. 5,500 kg Total Power Requirement: 40 kVA Space Requirements: approx. 4.0 m x 3.0 m x 2.8 m Equipment & Features: High-End Control: Heidenhain TNC 430 5-Axis Capability: Full NC swivel/rotary integration.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 Gjdpfsym Nb Ajx Amueit - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available Gijdpfx Amsvt D D Ujuot space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: excellent (used), Year of construction: 2002, CNC Machining Center DECKEL MAHO DMU 80 T Year of manufacture: 2002 Control: Heidenhain iTNC 530 Spindle: replaced on 14.11.2018, approx. 17,000 hours Technical data: Travel paths: X: 880 mm Y: 630 mm Z: 630 mm Controlled B-axis in milling head: -15° to 90° Spindle speed: 12,000 rpm Tool changer capacity: 32 positions Tool holder: SK 40 Gisdpfsylk Sysx Amust Coolant system: available

Condition: used, Year of construction: 2001, x-travel 880 mm y-travel 630 mm z-travel 630 mm Control Heidemhain type 426/430 spindle speed: 18000 spindle taper HSK 63 surface area 1250x700 mm Rotary table 700 mm Table load 1000 kg b-axis Schwenkopf 0,001 ° c-axis 0-360° Rundtisch 0 B-axis C-axis Air blow through the spindle HSK 63 Electronic handwheel The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Godpeyqukdsfx Amusit We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Godpfx Amjyrgk Esueit Milling Machine Condition: Used Year of manufacture: 2002 Technical Data Tool holder: SK 40 Tool stations: 16 positions Travel X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Table size: 700 mm x 500 mm rotary table Motor power: at 100% duty cycle 9 kW / at 40% duty cycle 13 kW Connection total: 17 kVA Weight: approx. 3000 kg Dimensions LxWxH: approx. 2100 mm x 1520 mm (without peripherals) / approx. 2140 mm

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, With Heidenhain iTNC 530 CNC control Year of manufacture: 2004 Travel paths: X 800 Y 600 Z 700 Spindle speed range: 0 – 12,000 rpm, stepless (SK 40) Gedpfx Aeym Rnkjmusit Including the following accessories: NC rotary tilting table Ø 630 mm Swivel milling head (horizontal + vertical) Universal tool changer with 60 magazine slots as double gripper (SK 40) Full safety enclosure with sliding doors and interior lighting 50 pcs. SK 40 tool holders ICS – 40 bar Chip conveyor Rotoclear 3D measuring probe Heidenhain Electronic handwheel Operating modes 3 + 4 3 height-adjustable machine feet Operating manuals THE MACHINE COMES FROM AN INSTITUTE AND IS IN EXCELLENT CONDITION!! POWER-ON HOURS: 29,496 hrs. PROGRAM HOURS: 10,050 hrs.

Condition: not inspected (used), Year of construction: 2000, operating hours: 26,350 h, functionality: unexamined, machine/vehicle number: 71401453, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: MILLPLUS, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Submission of a bid obligates timely collection either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Max. spindle speed: 12,000 rpm X-axis feed rate: 20 – 15,000 mm/min Y-axis feed rate: 20 – 15,000 mm/min Z-axis feed rate: 20 – 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Linear encoder resolution X-axis: 0.001 mm Linear encoder resolution Y-axis: 0.001 mm Linear encoder resolution Z-axis: 0.001 mm Input increment X-axis: 0.001 mm Input increment Y-axis: 0.001 mm Input increment Z-axis: 0.001 mm Positioning tolerance X-axis: 0.010 mm Positioning tolerance Y-axis: 0.010 mm Gisdpfx Amoym Aucsuot Positioning tolerance Z-axis: 0.010 mm Tool holder: SK 40 Max. tool diameter: 100 mm Max. tool length from spindle nose without tool breakage control: 350 mm NC rotary table clamping surface: 630 mm diameter T-slot spacing: 63 mm Number of T-slots: 9 Centering bore: 50 mm diameter Max. table rotation speed: 10.7 rpm Table feed rate: 3,600°/min Table encoder resolution: 0.001° MACHINE DETAILS Control: MILLPLUS Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Weight: 10,000 kg Recorded spindle hours: 26,350 h EQUIPMENT 60-position automatic tool changer Chip conveyor Coolant system Note: The machine can be transported on a truck with a width of 3,000 mm. External reference: Elos – Lot 6

Condition: used, Year of construction: 1999, DECKEL MAHO - DMU 35 - 1999 - TNC310 - x/y/z= 350/240/340 mm - B+105°/-15° C360° Gjdoy Ic Igepfx Amujit - B+C manual - 5.000 rpm - SK40 - defective axis B encoder