Dmc 635 v eco for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
13

Machining centers (vertical) DMG DMC 635 V Eco

Kaiserslautern, GermanyGermany dealership location
6526 km
2011
ready for operation (used)
General Data Measurements width 2050 mm Measurements depth 2530 mm Measurements height 2650 mm Machine weight 3700 kg Control Unit Brand Siemens Model 810D Be8vj9hi9z Main Drive Spindle speed range 8000 Movement X-Axis Movement 635 mm Y-Axis Movement 510 mm Z-Axis Movement 460 mm Workpiece Workpiece weight 600 kg Table Outer length 790 mm Outer width 560 mm Media Main electronic connection 400V / 50Hz Power consumption 17 kVA Internal cooling Yes Additional Equipment Large, all equipemen... more
8

Machining centre vertical DMG MORI DMC 635 V Ecoline

Brno - Slatina , Czech RepublicCzech Republic
7114 km
2012
excellent (used)
Machining centre vertical DMC 635 V Ecoline Producer: DMG MORI YP: 2012 Control Heidenhain ... TNC 620 Gvwbqc Clamping table surface ... 790 x 560mm Axis X ... 635mm Axis Y ... 510mm Axis Z ... 460mm Spindle speed ... 0-12000 / min. controlled axes ... 3 cooling ... 12bar SK 40 Machine weight ... 3900kg Magazine places ... 30 Probes OMP40-2, OTS Transmission module OMI-2T The machine is in good condition, possible to test under power. more
7
DMG DMC 635 V ECO-2011 year. Technical data: -Control: SINUMERIK 810D -Number of hours to switch on: 16909 -Number of machining hours: 4713 -Spindle speed: 20-8000 l/min. -Tool holder: SK 40 -Sliding ranges, X, Y axis, Z: 635x510x460 mm -Maximum workpiece Weight: 600 kg Ro2jv0tg -Number of storage spaces: 20 pcs. -Tool magazine: with double grippers -Spindle tip distance from the table: 120-580 mm -Clamping force of the tool: 10 kN -Maximum tool Diameter: diameter 80 mm -Maxim... more
11
x-way 635 mm y-Way 510 mm z-Way 460 mm Machine one: 39779 pcs Spindle one: 13226 pcs Control Siemens 810D Main spindle: Speed range-main spindle max. 8,000 min/-1 Drive power-main spindle 13/9 kW Dwjhca Tool recording SK 40 Max Torque 83/57 Nm Excess 8 kN Desk: Table surface 790 x 560 mm Ckje3lbi Number of T-grooves 4 + 1 T-groove-distance 100 mm T-groove-Width 4x 14H12/1x 14H7 mm max. Table load 600 kg Table height above floor 720 mm Distance spindle nose and table 120-... more
15

3 Axis Machining Center Dmg Mori DMC 635 V Ecoline

UMRANIYE-ISTANBUL, TurkeyTurkey
8436 km
2012
ready for operation (used)
Axis Movement: X 630 mm Ber8hctl70 Axis Movement: Y 510 mm Axis Movement: Z 460 mm Control: Heidenhain Spindle speed: 8000 -1/min Tumber of toolposition: 20 Max. Table load: 600 kg Total power requirement: 17 kwa Weight of the machine: 3.900 KG Dimensions of the machine: 5.50 m / 4.50 m / 2.74 m more
6
x-travel 635 mm y-travel 510 mm z-travel 460 mm control 840D sl ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Ggqzbvse tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm work table: table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Tool-Presetter: number of toolpositions 20 pos. Max. mould width 80 / (130) mm max. tool ... more
9
x-travel 635 mm y-travel 510 mm z-travel 460 mm control Heidenhain Main spindle: turning speed range - main spindle max. 8.000 min/-1 power capacity - main spindel 13 / 11 kW tool taper SK 40 max. Torque 83 / 57 Nm tension force 10 kN work table: table surface area 790 x 560 mm C7m0xwb number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm Tool-Presetter: number of toolpositions 20 pos. Max. mould widt... more
10
x-travel 635 mm y-travel 510 mm z-travel 460 mm control TNC 620 Heidenhain Main spindle: turning speed range - main spindle max. 8.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 max. Torque 83 / 57 Nm tension force 8 kN work table: table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm Tool-Presetter: numbe... more
10
x-travel 635 mm y-travel 510 mm z-travel 460 mm control 810 D powerline Siemens Main spindle: turning speed range - main spindle max. 8.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper BT 40 max. Torque 83 / 57 Nm tension force 8 kN work table: table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm Tool-Presetter: ... more
2

Becomix - Ruehrkessel Becomix - Stirring vessel

MA Barneveld, NetherlandsNetherlands dealership location
6266 km
used
Make Becomix, No 011/6-417, New 1992, Material Stainless steel, Material finish undefined, Closed stirring vessel (1x), Capacity 605 Ltr, Vessel sizes dia. 900x750mm, Dished bottom , Dished top side , Manhole dia. 395mm, Top connections 2x dia. 65mm + dia. 40mm + dia. 20mm, Outlet ± dia. 35mm, Working pressure vac/3 bar, With jacket (45 Ltr), Working pressure 6 bar, Max. temperature 165 Degr. C., With dissolver stirrer , Motor 3,0 KW, 380 Volt (Ex), Mounted on legs /in stainless steel frame, Fl... more


dmc 635 v ...
daily

New machines via email!

Stay updated!
2
x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control 840 D sl Siemens Main spindle: turning speed range - main spindle max. 8.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 work table: table surface area 1.200 x 560 mm max. table load 1.000 kg table height over floor 720 mm T-slots 5x 14 x 100 Tool-Presetter: number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool w... more
5

Gear Iveco Getriebe Euro Cargo 2855 B 6 / 2855B6

Emmerich, GermanyGermany dealership location
6322 km
ready for operation (used)
Used manual transmission with auxiliary drive for Iveco Euro Cargo tipper with rope train circuit type: 2855 B 6Parent number: 8871007legisll. VAT must be deposited as a deposit when exporting outside the EU, ALL ANGABEN WITHOUT WEWEAR, ZWISCHENVERKAUF + IRRTUM VORBEHALTEN condition for the closing of the purchase is a business--business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license ... more
4

Rotary Welding Table - Round Surface Javac ECO-S300

Niederlangen, GermanyGermany dealership location
6338 km
2018
used
table diameter:500 mm table load:0,3 t swivelling range:0-90 Grad table turning speeds:0,5 - 5 U/min Gvu9a8 total power requirement:0,2 kW weight:90 kg more
4

DMC 64V DMG MORI Universal Fräszentrum

Kraichtal, GermanyGermany
6609 km
2002
repair required (used)
DMC64V Machine number 29100000442 Odkqmk0 Control Siemens D810 Bj 2002 X_Axis 640 mm Y-axis 600 mm Z-axis 500mm Ball spindle YZ axis 40 x 15 X Axle Liniar Drive Rapid response XY 40 m/min X Axis 60 m/min Direct measuring system Main drive infinitely variable 0- 12000 min Engine power 100%ED 13 KW 40%ED 19 KW Tool changer with fixed-site coding 30fold Vertical pick-up system by working spindle Tool weight max 7 kg Tool length max 300 mm ... more
9

Machining centers (vertical) DECKEL MAHO DMC 635 V

Kaiserslautern, GermanyGermany dealership location
6526 km
2008
ready for operation (used)
General Data Measurements width 2665 mm Be373ocaz0 Measurements depth 1969 mm Machine weight 4100 kg Control Unit Brand DMG Model Fanuc 32 Main Drive Spindle speed range 20 - 10000 Movement X-Axis Movement 635 mm Y-Axis Movement 510 mm Z-Axis Movement 460 mm Workpiece Workpiece weight 600 kg Table Outer length 790 mm Outer width 560 mm Distance between 100 mm Media Main electronic connection 400 V This DECKEL MAHO DMC 635 V Vertical Machining Center, produced in Germany in 2008. It has a... more
2
Make Vrieco, Type 0,6 VB-1, No 8310086, New 1986, Material Mild steel, Conical mixer , Capacity 60 Ltr., Largest cone diameter 740mm, Cone height 847mm, Dished top (180mm), Manhole Dia. 150mm, Top drive , Motor 1,5 KW, 220/380 Volt, Motor 0,55 KW, 220/380 Volt, Cantilevered screw , Bottom discharge Dia. 125mm, Floor space Dia. 1,0 M, Total height 1,5 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to... more
3
Magazine: 20 tools, double arm changers Conveyor Accessories: About 40 WKZ recordings SK40 Jm9bhtj3 2 Allmatic screws NC 125 more
2

Gear ZF Getriebe S 5-30 / S5-30 Iveco-Magirus

Emmerich, GermanyGermany dealership location
6322 km
ready for operation (used)
ZF Gear S5-30, S5-30, Iveco Magirus 130R80, 130R81 ... If present several times, the condition for the conclusion of the purchase is a commercial activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on th... more
6

CNC lathe DMG MORI CTX 510 eco v

Brno, Czech RepublicCzech Republic
7105 km
2009
good (used)
Swing over bed: 465 mm max turning length: 1050 mm The machine is in a good technical condition, after agreement the possibility to test it under power. Sinumeric 810 Control System. Turning diameter 680 mm Main spindle: Speed range - max. Spindle 3250 min / -1 Motor power - 33 kW main spindle max. Torque 630 Nm Spindle 220h5 Diameter Chuck SMW 260 Spindle with bearing diameter 100 mm, Spindle bore 76 mm Max. Diameter 72 mm Bar C axis 360 Spindle head 12 positions / 6 driven Be8m8bwhh... more
1
Hgptryf Mold Sampler: device for making prototype moulds. A plastic substance is heated and injected into the mould. mounted on mobile table incl accessories pressure: 4-6kg/cm2 more
2

Sweco LS18 - Ruettelsiebe Sweco LS18 - Vibro sieve

MA Barneveld, NetherlandsNetherlands dealership location
6266 km
used
Make Sweco, Type LS18, No "unknown, typeplate is missing", New 2006, Material Stainless steel, Vibro sieve , Sieve surface 0,16 m2, Number of sieve decks: 1, Sieve sizes dia. 45cm, Outlet dia. 45cm, Drive vibro motor 0,18 KW 220/380 Volt, Sieve perforation 0,16 m2, With ball cleaning , Floor space 0,8x0,5 M, Total height 0,7 M, Weight 90 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destina... more
4
Model year: 2016 Working tonnage: 300.000 tons In a good condition, no maintenance is required Please contact for more detailed information Cb3kxous more
5

Cabins Iveco Stralis

Emmerich, GermanyGermany dealership location
6322 km
ready for operation (used)
Iveco No.: VDO 504156164Siemens No.: 1557.0001010002 dashboard of Iveco Stralis, used, different versions on Lager.Bedingung for the purchase is a business-business of the buyer and their appropriate proof. Please send us proof of your business upon completion of the purchase-commercial activity (E.g., tax identification number, business license or association or Chamber card). Shipping delivery takes place after evidence of business-Gewerbetätigkeit.Verkauf and delivery be made solely on the ba... more
10
In good technical condition. GO: 2008. Travels: X, Y and Z: 1035 x 560 x 510 mm. Table area: 1200 x 560 mm. Table load: 1000 kg. Tool changer: 20 positions. Spindle speed: 20-8000 rpm. Machine dimensions: 4000 x 4000 x 2500 mm. Machine weight: 4,300 kg. Control systém: Sinumeric 810 Yudax7u Accessories: Clamps SK 40, clamping vice, tools, chip extractor, technical documentation. more
3
1x HAEMONETICS Cell Saver 5+ Autologous Blood Recovery System Features: - Separation Technology: Latham Bell - Bells in different sizes: 70 ml, 125 ml, 225 m Cr372w80 - Platelet Sequestration: Yes - Medium to high speed processing: 3-7 minutes per cycle. Up to 800 ml per minute can be processed in emergency situations. Manufacturer information: Our autologous blood recovery system Cell Saver® 5+ is designed for use in operations with moderate to high blood loss, such as trau... more
1
to be sold as one lot Icyfnfsnu more
2

Becomix - Prozesskessel Becomix - Processing vessel

MA Barneveld, NetherlandsNetherlands dealership location
6266 km
used
Make [...] gmbh, Type Inclinomat, No 011 1 5336, New 1987, Material Stainless steel, Open stirring vessel , Capacity 184 Ltr, Vessel sizes dia. 650 x 600mm, Dished bottom , With cover , Top connections dia. 20mm, dia. 50mm, dia. 60mm, Outlet 50mm, Working pressure 0,5 bar, With jacket 14 Ltr, Working pressure 4 bar, Max. temperature 111/152 °C, With anchor stirrer , Motor 9,0 KW, 380 Volt, Speed mixing shaft Variable, With homogeniser , Motor 4,7/5,7 KW, 380 Volt, Floorspace 1,4x1,2 M, Total he... more
4

vertical machining center DMG DMC 635 V

Kirchheim b. München, GermanyGermany
6852 km
2006
excellent (used)
Steuerung Siemens 840 D längs 635 mm quer 510 mm senkrecht 460 mm Werkzeugwechsler 20 Pos. max. Werkzeuglänge 250 mm max. Werkzeugdurchmesser 80 mm max. Werkzeugdurch. bei freier Nachbarbox. 130 mm Eilgang 30/30/30 m/min Raumbedarf ca. 2,77 xx 2,85 x 2,60 m Maschinengewicht ca. 4,5 t Antriebsleistung 100% ED 9 kW Antriebsleistung 40 % ED 13 kW Drehzahlbereich 20 - 8.000 U/min Werkzeugaufnahme SK 40 I2qijilxo Tischfläche 790 x 560 mm Zulässige Belastung (tischmittig) 600 kg more
2

Gear ZF 4 S-120 GP + Z90 / 4S120GP+Z90 Iveco-Magirus

Emmerich, GermanyGermany dealership location
6322 km
ready for operation (used)
ZF 4S-120 GP + Z90 for IVECO MAGIRUS ... The condition for the conclusion of the purchase is a business--to-business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on the basis of our terms and cond... more
5

Machining centre vertical Deckel Maho DMC 635 V

Brno - Slatina , Czech RepublicCzech Republic
7114 km
2006
excellent (used)
Machining centre vertical DMC 635 V Nnlmb Producer: Deckel Maho YP: 2006 ControlHeidenhain ... TNC 530 Clamping table surface ... 790x560mm Axis X ... 635mm Axis Y ... 511mm Axis Z ... 461mm Spindle speed ... 8000 -_ / min. controlled axes ... 3 SK 40 Main motor power ... 8,4 / 13kW Magazine places ... 20 Max. Table load ... 600kg L x W x H ... 2530x1800x2600mm chip conveyor The machine is in good condition, possible to test under power. more
5
TO SALE: A LASER CUTTER Manufacturer: LVD Type: HELIUS 25/13 Cpl. Max: 2KW Power 47KW Year of manufacture: 2004 CN: FANUC Qxl9rtqn weight. Max.: 12500 daN Tension 400V-50Hz Power 47KW Year of manufacture: 2004 Quantity: 1 PRICE 12000 For more information please contact us. more
8
Movable concrete block making machine SUMAB E-6. ECONOMY CLASS Concrete block making SUMAB E-6 is egg layer type machine, (that strips blocks on floor) used for manufacturing of: 8u9b30gw7 Hollow blocks Solid blocks Chimney blocks Hourdy blocks Curbstones Technical data: Operation mode - semiautomatic Max block height 350 mm Min block height 170 mm Mould production area max 1250x500 mm Concrete hopper volume 700 l Machine weight 3.500 kg Consumption of electricity 10... more
2
Make Hosokawa Micron BV, Type 10 VV-2, No 3-772773, New 1979/1994, Material Stainless steel, Conical mixer , Capacity 1000 Ltr, Largest cone diameter 1580mm, Cone height 2200mm, Manhole dia.500mm, With stainless steel arm , Top drive , Motor screw 5,0 KW, 380 Volt, Motor arm 0,75 KW, 220/380 Volt, Cantilevered screw , With jacket , Working pressure 3 bar, Bottom discharge dia.300mm, Mounted on legs , Floor space 2,0X1,8 M, Total height 4,6 M, Weight 1550 KG What you can expect from Foeth: all ou... more
7
x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control 840 D sl Siemens Ptxoqq Main spindle: turning speed range - main spindle max. 8.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 work table: table surface area 1.200 x 560 mm max. table load 1.000 kg table height over floor 720 mm T-slots 5x 14 x 100 Tool-Presetter: number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max... more
2

Gear ZF 12 AS 2301 / 12AS2301 IT MAN / Iveco / DAF

Emmerich, GermanyGermany dealership location
6322 km
ready for operation (used)
Transmission ZF 12 AS 2301different executing and without retarder suitable for MAN, IVECO, DAFCondition for the purchase is a business--business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on th... more
10

Machining centre vertical DMG MORI DMC 1035 V Ecoline

Brno - Slatina , Czech RepublicCzech Republic
7114 km
2012
excellent (used)
Machining centre vertical DMC 1035 V Ecoline Nnlkz Producer: DMG MORI YP: 2012 Control Heidenhain ... TNC 620 Clamping table surface ... 1200 x 560mm Axis X ... 1035mm Y axis ... 550mm Axis Z ... 430mm Spindle speed ... 0-12000 / min. controlled axes ... 3 cooling.. 12bar SK 40 L x W x H ... 4000 x 4000 x 2900mm Machine weight ... 4100kg Magazine places ... 30 Probes OMP40-2, OTS Transmission module OMI-2T. The machine is in good condition, possible to test under power. more
4
TO SALE: Tour CNC DECOFLEX passage 42 mm sold with its IEMCA TALL G7rvmb9 PRICE: $6000 Sold Full Machine more
3
Model year: 2012 Working tonnage: 200.000 tons Beljwzfwmy In a good condition, no maintenance is required Please contact us for more detailed information more
2
Make The Comil, Type 194 S, No 194-0115, Material Stainless steel, Conical granulating sieve (1x), Sieve sizes dia. 205x130mm, With hopper , Inlet dia. 150mm, Outlet dia. 250mm, Motor ±2,5 KW, 380 Volt (Ex), Speed 350-1750 Rpm, With extra sieves , Mounted on wheels , With switch , Floor space 1,3x0,8 M, Total height 2,0 M, Weight 350 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destinatio... more
10
x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control 810D powerline Siemens Main spindle: turning speed range - main spindle max. 10.000 min/-1 power capacity - main spindel 11 / 7 kW max. Torque 83 / 57 Nm tool taper SK 40 work table: table surface area 1.200 x 560 mm max. table load 1.000 kg table height over floor 720 mm T-slots 5x 14 x 100 Tool-Presetter: number of toolpositions 20 pos. Be3vwyzvgm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length... more
3

Gear ZF Getriebe 12 AS 2330 TD / 12AS2330TD Iveco Stralis

Emmerich, GermanyGermany dealership location
6322 km
ready for operation (used)
Transmission ZF 12 AS 2330 TD, for IVECO Stralis, condition for the closing of the purchase is a business---business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on the basis of our terms and cond... more
6

Vertical Machining center DMG DMC 1035V eco

Vaihingen-Horrheim, GermanyGermany
6629 km
2011
excellent (used)
DMG Mori DMC 1035 V eco. Very good condition, with only 6000 hours of spindle. Year 2011 3D control Siemens 810 d with ShopMill Nllkl Traverse path X / Y / Z 1035 x 560 x 510 mm Direct Wegmessystem in X/Y/Z incl. sealing air 4th axis Lehmann EA 510 with tailstock spindle SK 40 with 10 000 rpm Tool magazine with 30 positions production package IKZ 20 bar, 600 litres Bed flushing Cab roof Rotoclear Spuellpistole Kühmittel-blowing air changeover Oil and Emulsionsnebelabcheider TRACY... more
0
UTECO used solventless laminator 1300 mm in operation mixing pump included S3waih good condition in operation interesting price more
1
A press tool for the compression of pipe systems. force: 32 kN compression range: plastic dia up to 75 mm - metal dia up to 54 mm tooling included, three heads for dia 28 - 22 amp; 15 mm 0al8ees9 As good as new! Video below the [...] more
2

Sweco S-18 - Ruettelsiebe Sweco S-18 - Vibro sieve

MA Barneveld, NetherlandsNetherlands dealership location
6266 km
used
Make Sweco, Type S-18, New "unknown", Material Stainless steel, Vibro sieve , Sieve surface 0,1 m2, Number of sieve decks: 2, Sieve sizes dia. 365mm, without cover, Outlet 3x dia 75mm, Motor 0,18 KW, 220-240/380-415 Volt, Sieve perforation 1,5mm + 3,4mm, With ball cleaning , Floor space 0,7x0,5 M, Total height 0,8 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are w... more
7
- Tool holder VDI 30 - Type W63550.2000 - more measurements see photos - Sales volume 1 pc. - used, functional - optical condition according to photos Shipping on request. We ship daily with DHL, general cargo (with loading board) and forwarding agent. All information about your purchase can be found during our business hours from Mon.-Thu. from 07:30 to 16:30 and Fri. from 07:30 to 14:00. Notes on how to buy our items: Nm8i9 We would like to point out that we are not a special... more
3

Other accessories Iveco Motorsteuergerät Cursor 10 F3AE0681

Emmerich, GermanyGermany dealership location
6322 km
ready for operation (used)
The condition for the conclusion of the purchase is a business--to-business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on the basis of our terms and conditions: http:--www.autogilles.de-agb Bran... more
2
EZ 10/2010 , Euro5 ,Allrad 8x8 ,Km.:ca.17000 ,Saddle plate, flatbed Manual transmission, 4 axles, weight: 40t Crane Fassi 1500AXP.28 +FlY Jip/L516 and winch Nljzt More on request more
10
For sale are 4 diesel generator sets, ready for use with the following technical specifications : Jvazre State: As new! Engine: Iveco Cursor 13 Generator: Marelli Power: 400 KvA Frequency: 50 Hz RPM: 1500 rpm. Year of construction: 2014 Operating hours: ca. 267 hours Auto start Ready for use immediately. We have 4 Pieces. Price net 19500 € per pc plus VAT more


dmc 635 v ...
daily

New machines via email!

Stay updated!

to

to

Edit search
DMC 635 V ECO
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.