Used Disc Flange for sale (8,474)

Condition: used, mileage: 69,550 km, power: 310 kW (421.48 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 16,500 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Mercedes PowerShift 3, Mtl. house, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, auxiliary heating, ABS (anti-lock braking system), traction control (ASR), retarder, auxiliary drive, raised exhaust, differential lock, fog lights, leaf suspension, roof hatch, environmental badge green Ndodovhi R Nepfx Abysc Wheelbase: 3600 mm 8t front axle, rear axle disc wheel 300 planets 13.4t, electronic brake system with ABS and ASR, ABS can be switched off, disc brakes with full protection on front and rear axle, secondary water retarder, condensation water monitoring for compressed air system, front axle stabilizer, Retarder heat recovery, auxiliary hot water heater, construction site filter, additional thermal insulation, PSM, reversing alarm, CompactSpace, comfort locking system, off-road driving program, Mercedes PowerShuft 3, daytime running lights, protective plate under bumper, transmission oil cooling, tank capacity: 290l, power take-off MB 131-2c pump, rear engine output b flange 120mm 900Nm. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, empty load weight: 8,700 kg, maximum load weight: 17,300 kg, overall weight: 26,000 kg, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, differential lock, electronic stability program (ESP), fog lights, low noise, onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, short cab, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, ABS (anti-lock braking system), traction control (ASR), power take-off (PTO), raised exhaust, automatic transmission, differential lock, leaf suspension, low-noise G1, central locking, green environmental sticker Wheelbase: 3600 mm Body: EU road registration possible! Diesel engine MAN D2676 LFxx 590, 324 kW (440 HP) output, 2,200 Nm torque, Euro 6e, transmission MAN TipMatic 12.28 OD, TipMatic gearshift strategy, EVBec high-performance engine brake (adjustable), emergency brake assist, disc brakes on front axle, drum brakes on rear axle, ESP, tinted door windows, central locking with remote control, short-distance cab NN, MAN app integration, MAN speaker system, MAN telematics, radio prep with CB antenna on cab roof, driver's comfort seat, air-sprung with lumbar support, shoulder adjustment, medium height design, heavy chassis class, gearbox-dependent PTO NH/4c without flange f=0.88/1.14 at approx. 2:30 position, tire pressure monitoring system (TPMS), blind spot assistant (BSIS), reversing assistant, collision warning system for pedestrians and cyclists, intelligent speed assistant. Factory warranty from delivery! Njdsvnf E Aspfx Abyodc Day registration on 26.11.2025! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted.

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, empty load weight: 8,700 kg, maximum load weight: 17,300 kg, overall weight: 26,000 kg, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, differential lock, electronic stability program (ESP), fog lights, low noise, onboard computer, power assisted steering, traction control, Vehicle location: Bovenden. Standard equipment: short-distance cab, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, ABS (anti-lock braking system), traction control (ASR), PTO (power take-off), raised exhaust, automatic transmission, differential lock, leaf suspension, low-noise G1, central locking, green environmental sticker. Wheelbase: 3600 mm Bodywork: EU homologation possible! Engine: MAN D2676 LFxx 590 diesel, 324 kW (440 hp), 2,200 Nm torque, Euro 6e Transmission: MAN TipMatic 12.28 OD with TipMatic shift strategy High-performance engine brake (EVBec) with multiple stages, full brake assist, disc brakes on front axle, drum brakes on rear axle, ESP (Electronic Stability Program), tinted door windows, remote central locking, short-distance driver’s cab NN, MAN app integration, MAN loudspeaker system, MAN telematics, radio prep with CB antenna on cab roof, air-suspended comfort driver’s seat with lumbar support, shoulder adjustment, medium height design, heavy-duty chassis class, PTO dependent on transmission NH/4c without flange f=0.88/1.14 at approx. 2:30 position, tire pressure monitoring system (TPMS), blind spot assist (BSIS), reverse assist, pedestrian and cyclist collision warning system, intelligent speed assist, factory warranty from delivery! Nodpsvnf Hgsfx Abyodc New vehicle from stock with day registration on 24.11.2025. ACCESSORY INFORMATION WITHOUT WARRANTY. Subject to changes, prior sale and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, Applications & Customer Benefits: Custom discharge chutes ensure smooth material flow, reduce downtime, and extend service life. Designed to fit any machine or layout, they optimize efficiency and durability even with abrasive materials. Nsdpfow U Aa Iex Abyjdc Key Features: • Tailor-made design per sketch, layout, or machine request • Available in various shapes, sizes, and materials • Optional Hardox wear plates for abrasive materials • Easy mounting and integration into existing systems

Condition: excellent (used), Year of construction: 2014, Flanging and dishing machine LUCAS - RD-3800 R MACH-ID 9280 Make: LUCAS Type: RD-3800 R Control: Siemens Simatic Year: 2014 Maximum diameter 3800 mm Nodjxta E Repfx Abysdc Minimum diameter 710 mm Thickness 40N/mm2 up to 6 mm Thickness 30 N/mm2 up to 8 mm Thickness 70N/mm2 up to 5 mm Flanging height 90 mm Working speed flanging 0 - 20 M/Min Working cutting speed 0-30 M/Min Tooling package included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Auxiliary switch, circuit breaker, fuse, circuit breaker, miniature circuit breaker, load break switch, terminal board, load breaker, fuse switch disconnector Nsdpfx Ajxnxx Ejbyedc -Manufacturer: Rittal, NH fuse switch disconnector 160 A with fuses -Type: SV9343.000 -Fuses: 3x 50A -Number: 2x load-break switches available -Price: per piece -Dimensions: 215/105/H135 mm -Weight: 1.2 kg/piece

Year of construction: 2005, condition: used, functionality: fully functional, – Polish production – DTR – Used machine, very good condition TECHNICAL PARAMETERS: – max. processed log diameter: 320 mm – minimum processed log length: 1600 mm – number of spindles: 2 pcs – spindle diameter: 70 mm – spindle working length: 230 mm – saw blade diameter: 450 mm – main motor power: 75 kW – feed motor power: 2 x 2.2 kW – upper feed rollers motor power: 1.1 kW – side discharge feed rollers motor power: 2 x 1.1 kW Ndjdpfxowu U Ife Abysc – 2 geared feed rollers – infeed table length: 2100 mm – outfeed table length: 2600 mm – machine dimensions (L/W/H): 600 x 200 x 185 cm – weight: ~3800 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 591.063.060.0016, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,800 kg, table length: 900 mm, Equipment: documentation/manual, The CUT P 550 model from 2017 is an advanced five-axis wire EDM machine, ideal for precise industrial applications: * wide angular range capabilities (up to 30–45°), Nodpfx Aewwrtwjbysdc * efficient and intelligent IPG generator, * accuracy within a few µm, * advanced automation systems and anti-collision protection, * stable, durable design enabling fully automatic operation.

Condition: good (used), Simatic panel, operator panel, machine control, interface panel, operating unit, control panel, keyboard, control panel teach pendant -Manufacturer: Basler, Operator Panel from printing machine OMSO Novadisc 4 3S UV -Type: unfortunately without type designation Nodpjwz H Rrjfx Abyedc -Dimensions: 615/190/H445 mm -Weight: 28.1 kg

Condition: excellent (used), Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, housing washer, shaft washer Ndjdpfx Ajv Sph Njbyec -Manufacturer: INA, bearing washer for axial cylindrical roller bearings unused -Type: GS 811 30 INA 72/M11 -Outer diameter: 188 mm -Inner diameter: 150 mm -Number: 19x bearing disc available -Price: per piece -Dimensions: Ø 188 x 10 mm -Weight: 0.7 kg/piece

Condition: used, max. width of grinding wheel 104 mm diameter / bore of grinding wheel 160 mm Flange taper compatible with NZA, AZA, RZ301E etc. Nedpfx Abou Sbdyoysdc

Condition: new, Factory-new electrically heated stainless steel agitator tank EBB90RWP Including operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in other sizes. Volume: 97L Dimensions approx.: Ø 540mm x cylindrical height 625mm Total height: 910mm (+ agitator motor) Material: 1.4301 stainless steel (V2A) Surface: inside and outside finely ground (matte finish) Weld seams ground smooth Max. operating temperature: 110°C Operating pressure (tank): Atm - Upright design on castors - Top: folding lid, half bolted, half hinged, with removable stainless steel grating for reach-in protection - Bottom: flat base with lateral outlet DN50 DIN11851 and disc valve - Agitator flange on the top cover - 2x push handles - 1x nameplate Propeller agitator Power: 0.25 kW Speed: 980 rpm Njdsym Arbjpfx Abyjdc Operating voltage: 3PH 400V

Condition: used, mileage: 570,000 km, power: 300 kW (407.89 HP), gearing type: mechanical, fuel type: diesel, color: red, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 03/2010, emission class: euro4, brakes: engine braking, suspension: steel, driver cabin: day cab, wheelbase: 4,200 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Croatia, Kz. Haus, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 16-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, leaf suspension, aluminum tank, low-noise G1, U-protection, sunroof, green environmental badge. Nedpoyniw Hjfx Abyjdc Wheelbase: 4200 mm, Body: interchangeable system consisting of a Stetter concrete mixer body, approx. 9 m³, and a three-sided tipper body, surcharge of €6,000, 7.5t front axle, H7 13t rear axle, bevel gear 233, ABS can be switched off, Telligent braking system with ABS and ASR, disc brakes on front and rear axles, stabilizer on rear axle, steel bumper, PSM, preparation for toll collection, distributor cockpit, Telligent gear shifting II, construction site filter, on-board diagnostics 1.0, transmission oil cooler, double PTO MB 124-11B/1C flange + MPA M-speed, engine output to the rear 600 Nm. VIN: WDB9333041L296831! All information is subject to change as the vehicle is in transit! Location: Trgo-Auto d.o.o. Matoseva 86 0 Solin Hrvatska / Croatia / Kroatien ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Year of construction: 2012, condition: used, Tipper with discharge belt and cross conveyor for the food processing industry This TVB400/4350 is a tipper built by FoodeQ Engineering, a manufacturer based in Steenbergen, the Netherlands, specialised in vibratory technology and belt conveying for the top segment of the food industry. The unit is constructed in stainless steel and fitted with a blue food-safe discharge belt, combined with a cross belt that carries the product away. The frame is enclosed by a mesh safety guard with an emergency stop button and a control box with up and down buttons for height adjustment. The machine stands on its own frame and is connected by a plug coupling. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Tipper with discharge belt and cross conveyor Belts: Blue food-safe discharge belt plus cross belt Safety: Mesh safety guard with emergency stop Controls: Control box with up/down buttons (height adjustment) Ndsdpfx Asz Ndhrjbyjc Construction: Stainless steel

Condition: used, mileage: 114,290 km, power: 265 kW (360.30 HP), first registration: 08/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, total length: 9,550 mm, total width: 2,550 mm, total height: 3,580 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), * Our internal vehicle number: 1204 MAN TGS 28.360 * Faun Rotopress 518 Terberg Omnideka * Output: 265 kW * Emission standard: Euro 6C * Type: Waste collection vehicle * First registration: 08/2018 * Mileage: Original * From 1st German municipal ownership * Automatic transmission - D/N/R * FAUN Rotopress 518 - Superstructure * Terberg Omnideka - Tipping body * 265 kW / Euro 6C * Reflectors * Rear view camera * Air conditioning system * 6 seats = 2 single seats (driver / passenger) + bench seat for 4 people * Storage box on the outside, on the left-hand side * Digital tachograph Excerpt from chassis number recognition (All information without guarantee): Special equipment: Ndodpfxez E T Tis Abyjc Exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electrically adjustable maneuvering aid, battery 225 Ah, battery disconnect switch mechanical, passenger seat comfort, air-suspended, curb mirror right electrically adjustable and heated, differential lock rear axle, digital axle load indicator for air-suspended axles, pressure sensor for air suspension bellows, ETA circuit breaker, cab: tilting mechanism electro-hydraulic, cab: with air suspension, driver's seat comfort, air-suspended and heated, with lumbar support, remote control central locking, flame starter system, flange coupling auxiliary drive elastically loose, windshield tinted and heated, tilting lever - brake EVBec controlled, automatic climate control, steering wheel with multifunction, air compressor 2-cylinder 720 ccm, air dryer heated, auxiliary heater Eberspächer D4S, auxiliary drive flywheel side, sun visor exterior, sound system, socket cab 12V and 24V, control module for external data exchange, bumper in steel design 3-piece, additional front / fog lights with cornering light Additional equipment: Axle configuration: 6x2, approach / front mirrors, trailer socket 24V / 7-pole, trailer socket ABS, anti-slip control (ASR), audio system: Radio MAN basic Line (Radio / CD), on-board computer MAN-Tronic, electronic braking system MAN-Brakematic, EURO 6 engine, cab: L, lower sleeper bunk with storage space, suspension: leaf / air, power windows, generator 28 V 80 A, transmission 16-speed - Type: ZF 16 S, lift roof mechanical, body / superstructure: chassis, tilting lever - brake EVB, fuel filter heated, fuel tank: combination tank - 400 L diesel + 60 L urea solution (AdBlue), air intake raised, engine 10.5 L - 265 kW diesel, trailing axle NO-08, liftable, spare wheel holder behind rear axle, disc brake rear axle, disc brake front axle, protective device side, side windows rear tinted, sun protection roller for windshield, spray mist reduction, stabilizer on one rear axle, stabilizer front axle, TGS, door windows tinted, underrun protection rear, underrun protection front, viscous fan, front axle VOK-09 arched, central locking, permissible total weight 26.0 t Note: Typographical errors excepted. The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information without guarantee We reserve the right of prior sale We refer to our general terms and conditions.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2007, total length: 11,330 mm, total width: 2,480 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = Nodpfxezumn Ij Abysdc - Air Suspension - Disc brakes = More information = Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 5.700 kg Carrying capacity: 35.300 kg GVW: 41.000 kg Registration number: OJ-21-RK

Condition: used, bottom outlet NW 50 pressure gauge with outlet Ndsdpjz N S Twsfx Abysc Optional: various fittings

Condition: used, mileage: 362,558 km, power: 375 kW (509.86 HP), first registration: 12/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab & Comfort Cab: Globetrotter safety cab FH (High Sleeper Cab, height 215 cm, length 205 cm) * Living Package: One bed, fold-down lower bunk (2000x815/740/660 mm) with safety net, pocket spring mattress * Air conditioning: Automatic temperature control with sun sensor * Auxiliary heater: Cab, 2 kW * Cool box: 33 liters with freezer compartment under the bunk * Interior: Seats in fabric (blue/dark blue), interior in gray fabric, armrests with vinyl, two armrests on the driver's seat * Driver's seat: Comfort, air-suspended, heated, seatbelt integrated * Passenger seat: Standard, non-suspended * Curtains: On windshield and windows * Storage compartments: Above the bunk (245 liters), storage space under the bunk * Vanity/shaving mirror * Shift console (luxury) on the bunk: Controls for lights, heating/air conditioning, sunroof, door, alarm clock, windows, and radio * Writing board for the steering wheel ----Infotainment & Connectivity Instruments: Digital 12'' driver information display * Second 9'' touchscreen color display * Audio: Multi-format, 8 speakers, tweeters, AM/FM, USB port (3-way) * Navigation: Info and media package with navigation, map region Europe * Instruments High: Digital 12'' driver information display, traffic sign recognition (in conjunction with LSS-DW), chrome bezel * Telematics: Telematics gateway with 4G * Various software services (e.g., Alexa Built-In, Android Auto, TomTom Navigation App) * Immobilizer: Transponder in the key * Central locking with remote control * Tachograph: Digital, Generation 2 ----Driver Assistance: * Lane keeping assistant * Collision warning with emergency braking function * Camera monitoring of the passenger side at the front * Traffic sign recognition * Brakes: Disc brakes * EBS (Electronic Braking System), ABS * ESP (Electronic Stability Program) ----Lights & Visibility: * LED headlights with adaptive high beams * Automatic light switching between daytime running lights and low beams via light sensor * Static LED cornering lights * Daytime running lights LED, "V-Light" * LED fog lights * LED taillights * Headlight cleaning system * Rain sensor * Light and visibility package Superplus * Two work lights at the rear top of the cab, LED * Mirrors, heated and electrically adjustable with close-range camera on the passenger side * Exterior sun visors * Aluminum rims Dura-Bright EVO, chrome rings ----Engine, Transmission & Technology Engine: Diesel engine D13K500, 12.8 l, 510 hp / 375 kW, 2,550 Nm, Euro 6 with SCR, particulate filter, and exhaust gas recirculation * Engine brake, exhaust pressure regulator (incl. engine control for I-Shift) * Transmission: I-Shift AT2612F, automated 12-speed transmission (direct gear) * PTO PTR-FH (fast), transmission-side, connection: 1 SAE flange at the rear (600 NM) * PTO functions for I-Shift, basic * Compact retarder, transmission-mounted (rear) with medium oil, braking power: 450 kW * Suspension: Air suspension at the rear, parabolic suspension at the front, electronic level control * Differential lock, rear axle ----Exterior & Structure Fifth wheel coupling: Jost JSK 37, fifth wheel coupling height 150 mm + substructure, central lubrication * Extension element for work platform * GHH Rand CS 700 Light R-PTO L compressor Ndedpfx Ajztih Isbyjc ----* Tire dimension front axle: 315/80R22,5 * Tire dimension rear axle: 315/80R22,5 * Fuel tank: 650 liters * AdBlue tank: 100 liters * Technical total weight: 21,000 kg * Tare weight: 7,882 kg * Wheelbase: 3,800 mm * Inspection

Condition: used, Conveyor belt with discharge Conveyor belt with pusher to the left Belt length 6200 mm plus 200 mm infeed rollers Nedpjzhif Ajfx Abysdc Belt width 335 mm Working height 980 mm Belt drive SEW 0.55 kW / 243 rpm Infeed rollers SEW 0.55 kW / 329 rpm Conveyor belt with discharge Reinhardt ATS Conveyor belt with ejection Conveyor belt with left push Belt length 6200 mm plus 200 mm feed rollers Belt width 335 mm Working height 980 mm Belt drive SEW 0.55 kW / 243 rpm Feed rollers SEW 0.55 kW / 329 rpm Price: 1. In its current condition, without working electrical controls: 2,700 EUR Optional: Working electrical control + 1,400 EUR

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Nsdpfxjzpcvdo Abyjdc Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: used, Year of construction: 2025, COLOMBO R. Discontinuous sandwich panel production line Ndsdpfezrhtmox Abyec Complete PUR sandwich panel production line for manufacturing panels up to 8 meters in length. Fully automated and equipped with a heated press, high-pressure foaming machine, and integrated roll forming system. A high-performance industrial solution for producing roof and wall sandwich panels in compliance with European standards. Production specifications - Production of sandwich panels up to 8 meters long. - Panel thickness: 40 - 100 mm. - Pre-painted steel thickness: 0.40–0.80 mm. - Manufacturing of roof and wall sandwich panels. - Capability to produce tile-effect sandwich panels. - Automatic cut-to-length system. - Automated machine settings. - Electrical components from leading brands: Siemens, Rexroth, Schneider Electric, Omron, and SMC. Line configuration - 4-platen heated press. - Maximum panel length: 8 meters. - Production of polyurethane (PUR) insulated sandwich panels. - ULTRAMIX 100 high-pressure foaming machine with 1:1 mixing ratio and self-cleaning mixing head. - Complete roll forming line for steel facings. - Two roll forming lines for manufacturing different panel profiles. - 7-ton hydraulic decoilers. - Automatic hydraulic cutting system. - PLC control system with touchscreen interface. - Automatic control of panel lengths and production quantities. - Fully automatic dosing of foam components. - CE-compliant installation with integrated safety systems. Included - Complete production line. - High-pressure foaming machine. - Heated press. - Roll forming equipment. - Outfeed tables. - Electrical control cabinet. - PLC control system. - Technical documentation included. Panel length: Up to 8 meters Panel thickness: 40 - 100 mm Pre-painted steel thickness: 0.40 – 0.80 mm Panel types: Roof and wall sandwich panels, capability to produce tile-effect sandwich panels Control system: PLC control with touchscreen interface and automatic settings Foaming machine: ULTRAMIX 100 high-pressure foaming machine (1:1 mixing ratio) Press type: 4-platen heated press

Condition: ready for operation (used), Year of construction: 2001, overall weight: 3,000 kg, Disc screen machine, screen length: approx. 2600 mm, screen width: approx. 910 mm, disc spacing: approx. 170 mm, (offset by approx. 85 mm), axle distance: approx. 50-60 mm Overall length: 3450 mm, overall width: 1500 mm, height: 2400 mm, weight: approx. 2500 kg, FLENDER gearbox, 6 axle bearings on the drive side are brand new, Used machine in good, operational condition, Nsdpfx Ajzmav Nebysdc No nameplate available.

Condition: refurbished (used), Refurbished and pressure tested. Lot of 45 flanged safety relief valves, spring loaded. Pressure ratings between 0.5 - 9 Bar. Nsdpov Dw R Nofx Abyedc

Condition: good (used), Clutch, power clutch, gear clutch, transmission clutch, flange hub for crane chassis, wheel, bridge crane, overhead crane, assembly crane, flange hub -Flange hub: for crane chassis -Part No.: 1031 4152 suitable for gearbox ID 34705 / ID 34752 Ndodpfxjv Hcghe Abyec -Type: 60H7 Part 369 SDDL-5-BS-200 -Hole: Ø 60 mm -Bolt circle: Ø 170 x 15 mm -Quantity: 3 pieces available - Price: per piece -Dimensions: Ø 200 x 210 mm -Weight: 20.4 kg/piece

Condition: good (used), End mill, roller cutter, milling cutter, disc cutter, slot cutter Ndsdpfxjy D Ndyj Abyec -Cylinder end mill: Disc cutter 99.6 kg net, carbide-tipped -Type: various versions -Price/Fee: complete -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg