Used Delem for sale (237)

Condition: good (used), Description: The machine is in good technical condition, and a test run is possible upon prior agreement. Tooling included. Distance between uprights: 3,700 mm. Stroke: 320 mm. Maximum opening between table and ram: 535 mm. Upright overhang: 510 mm. Width of work table: 90 mm. Approach speed: 140 mm/s. Working bending speed: 10 mm/s. Return speed: 140 mm/s. Range of back gauge X: 820 mm. Range of R-axis: 150 mm. Main motor power: 18.5 kW. CNC control: Delem DA-65. Lubrication: central. Weight: approximately 20,800 kg. Kdedpfoz S Hw Asx Akpeu

Condition: good (used), Year of construction: 1991, machine/vehicle number: P 10106, Offer 26338 Technical data: - Max. working length: 3340 mm - Stand opening: 2600 mm Kodpfxoz R Rkfs Akpedu - Max. pressing force: 100 t - Overhang: 400 mm - Max. stroke: 100 mm - Max. installation height: 370 mm - Table height (approx.): 960 mm - Approach speed / rapid traverse: 85 mm/s - Pressing speed: 10 mm/s - Retraction speed: 80 mm/s - Drive power: 9.5 kW - Space requirement (approx.): W 3500 x H 2350 x D 1950 mm - Weight (approx.): 6.8 t - Including: - CNC control system DELEM DA 58 - Rear stop 0 - 600 mm

Condition: good (used), Year of construction: 2014, functionality: unexamined, Press force: 100 t Bending length: 3050 mm Distance between uprights: 2550 mm Machine weight, approx.: 9,000 kg Space requirement, approx.: 4000x2100x2700 mm Accessories/Equipment: - 2 support arms in front of the machine - Lazer Safe - 4 stop fingers - Foot switch - Delem DA 75 W control system - Side safety doors - Amada tool holder Kjdpszd Tnyjfx Akpjdu - Crowning

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, operating hours: 49,000 h, Press force / bending length: 500 kN / 1275 mm Kjdpez I Sd Eofx Akpodu TrumaBend control system / standard: 2D graphic control, color, DELEM.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, operating hours: 44,000 h, Press force / bending length: 500 kN / 1275 mm Kodpfx Akjz I Sh Rjpedu TrumaBend control system / standard: 2D graphic control, color, DELEM.

Condition: ready for operation (used), Year of construction: 2003, pressure 160 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 370 mm stroke of upper beam 200 mm throat 500 mm ajustment speed 100 mm/sec Ksdszrzt Hjpfx Akpjdu working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 900 mm back stop - adjustable max. 500 mm Control CYBELEC oil volume 150 l total power requirement 15.0 kW weight 12000 kg range L-W-H 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition (!!) Includes optional equipment - in checked conditions - machinevideo - ?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control unit * Swiveling control panel (front right) * Tool & program library * Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) * With 4x manually adjustable stop fingers (Z-axis) - CNC motorized height adjustment (R-axis) - WILA CNC bed crowning system - WILA electro-hydraulic upper tool clamping * Incl. sectionalized set of 28° acute-angle punches * Incl. WILA hydraulic power unit - WILA manual lower tool clamping * Incl. die adapter rail (width 77 mm) * Incl. WILA tool holder (width 13 mm) - 2x sliding front support arms - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Operating manual

Condition: used, total length: 4,600 mm, total width: 2,200 mm, total height: 3,000 mm, Year of manufacture: 2004 Weight: 21.500 kg Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 12.2235 - Drive system: CNC - Control system brand: Delem - Power [kW]: 33.5 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 300 - Max. working width [mm]: 4300 - Column gap [mm]: 3700 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 4600mm x 2200mm x 3000mm (l x w x h) Kedpfsyvt Dzjx Akpedu - Transport weight [kg]: 21500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2005, condition: ready for operation (used), overall weight: 9,500 kg, total width: 1,700 mm, total height: 2,300 mm, pressing force: 102 t, product length (max.): 3,800 mm, number of axes: 8, CNC Hydraulic Press Brake manufactured in 2005. This GASPARINI X-Press 100 features a press force of 100 t and a bending length of 3,100 mm. It is equipped with a Delem DA60 control and a dynamic hydraulic crowning system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI X-Press 100 machine we have for sale. Contact us for further details regarding this machine. Kjdpfx Akszypi Eopsdu • Ram stroke: 300 mm • Tool clamping: Promotec pneumatic system • Hydraulic crowning: Dynamic hydraulic crowning of the lower table • Axes: Y1, Y2, X, R, Z1, Z2, X1, X2 (8 axes) • Oil seals: Replaced • Oil: New • Warranty: Included • Condition: Machine guaranteed / ready for sale Technical Specification Bending Length 3100 mm

Condition: new, Year of construction: 2026, machine/vehicle number: P784, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 230 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 500 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, overall weight: 20,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The all-rounder with extra power! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process. Press force: 2,300 kN (230 t) Working length: 3,100 mm Clearance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower bed above floor: 850 mm Rapid traverse max.: 200 mm/s Pressing speed max.: 9.8 mm/s Retraction speed max.: 150 mm/s Positioning accuracy of ram: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 18.5 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 17.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side stands with two pressure cylinders, above-floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Proportional control valve, electronically monitored cylinder synchronization Double upper beam guide, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: narrow table, single V (13 × 20) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Crowning Centrally adjustable, hydraulically-dynamically, CNC-controlled Active control loop keeps the lower bed in the zero position Constant bending angle > Back gauge 4 axes X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency Kdedpfx Akez Hnzkspou CE compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment Air conditioning in the control cabinet LED work area lighting at the rear Remote diagnostics for Delem control and Pilz PLC

Condition: new, Year of construction: 2026, machine/vehicle number: P781, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, pressing force: 30 t, stroke length: 165 mm, operating speed: 250 mm/s, reverse speed: 160 mm/s, table length: 1,020 mm, throat depth: 255 mm, distance table to ram: 350 mm, clearance between the columns: 850 mm, oil tank capacity: 90 l, overall weight: 3,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, Prepared for automated operation! The single-cylinder Quality Press Brake, or EQPB for short, is the smallest model in the Placke range of press brakes. It is a very fast, robust, and quiet machine specifically designed for the production of small parts. All manufacturing processes, from the hydraulic cylinder to the control cabinet construction, take place in-house. Through the use of state-of-the-art technology, combined with many years of experience in the field of forming technology, the EQPB series enables you to perform bending operations at a high level. Kdodpfx Akez Hnymspsu Even the standard basic model is a fully functional press brake. Thanks to this combination of safety, reliability, and efficiency, coupled with user-friendly operation, we can meet the highest demands and achieve the greatest precision in the bending process. Press force: 300 kN (30 t) Working length: 1,020 mm Distance between uprights: 850 mm Installed height: 350 mm Overhang: 255 mm Ram stroke: 165 mm Height of lower bed above the floor: 947 mm Rapid traverse max.: 250 mm/s Pressing traverse max.: 9.8 mm/s Retraction max.: 160 mm/s Ram positioning accuracy: ± 0.01 mm Motor power: 3.0 kW Hydraulic oil tank capacity: 90 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 3.8 t Description: > Machine body Steel S 355 N, design based on FEM analysis Torsionally rigid welded construction, floor-standing 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper Beam Proportional control valve Low-noise internal gear pump Roller guide, Heidenhain scale > Tooling WILA pneumatic, top NSCL-II-SL-STL, bottom OB-II-SL-STL Smart Tool Locator: LED display of tool position Y1/Y2 correction, sitting or standing > Backgauge 4-axis X-axis 950 mm, 800 mm/s, ± 0.01 mm R-axis 215 mm, 150 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger spacing min. 50 mm > Angle correction VCA Fully automatic camera-laser system Measures the outer angle on the sheet metal Two force sensors for springback measurement > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Robot preparation Large control cabinet, Modbus interface press-robot Modular PLC PSS 4000 Stop finger with workpiece detection > Safety & Efficiency CE-compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic With this equipment, the machine is prepared for automated operation.

Condition: new, Year of construction: 2026, machine/vehicle number: P790, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, pressing force: 150 t, stroke length: 265 mm, operating speed: 200 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 450 mm, clearance between the columns: 2,600 mm, oil tank capacity: 290 l, overall weight: 12,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, The workhorse! A press brake for all applications! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the control cabinet assembly, takes place in-house. By using state-of-the-art technology combined with many years of experience in the field of forming technology, the HQPB series enables you to bend at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, along with easy operation, allows us to meet the highest demands and precision in the bending process. Press force: 1,500 kN (150 t) Working length: 3,100 mm Distance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower ram above the floor: 850 mm Rapid traverse max.: 200 mm/s Pressing traverse max.: 9.8 mm/s Return traverse max.: 150 mm/s Ram positioning accuracy: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 15 kW Kdjdpfx Aksz Hn D Ejpou Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 12.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side uprights with two pressure cylinders, above floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper Tool Proportional control valve, electronically monitored cylinder synchronization Double upper ram guidance, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: mechanical clamping for dies with pins (13 × 20 mm) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Power Crowning Slim Segmented, mechatronic crowning system Compensates for symmetrical deflection Also compensates for deviations due to wear, sheet metal quality and off-center insertion > Back gauge 4-axis X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger spacing min. 50 mm > Control Delem DA 66S 24″ touchscreen on a swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE-compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment LED work area lighting in the rear Remote diagnostics for Delem control and Pilz PLC Automatic side upright compensation

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 399, functionality: fully functional, Equipment: documentation/manual, Thibaut multifunction machine for processing natural stone Monoblock design (no foundation required) Spindle speed: 250 - 10,000 rpm Automatic vertical oscillation Vertical motorised fine adjustment of the spindle Tool holder: SK 40 Pneumatic contact pressure 300 mm spindle height adjustment 100 mm pneumatic height adjustment X-axis travel: 3,400 mm Worktable with tilting adjustment Worktable size: 3,000 mm x 970 mm Kdedpfx Asy Iu Ixokpou Articulated arm locking system Marble grinding plate (receptacle 3 x Frankfurt type) Includes tools and arbors

Condition: new, Year of construction: 2026, machine/vehicle number: P786, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, pressing force: 60 t, stroke length: 215 mm, operating speed: 280 mm/s, reverse speed: 170 mm/s, table length: 1,550 mm, throat depth: 255 mm, distance table to ram: 400 mm, clearance between the columns: 1,200 mm, oil tank capacity: 120 l, overall weight: 6,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Small, powerful all-rounder! Also suitable for multi-station operation! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the control cabinet construction, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to bend at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability and efficiency, together with easy operation, allows us to meet the highest requirements and accuracies in the bending process. Press force: 600 kN (60 t) Working length: 1,550 mm Distance between uprights: 1,200 mm Installation height: 400 mm Overhang: 255 mm Ram stroke: 215 mm Lower bed height above floor: 947 mm Rapid traverse max.: 250 mm/s Pressing traverse max.: 9.8 mm/s Kdedpfx Aksz Hnz Djpju Retract traverse max.: 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 5.5 kW Hydraulic oil tank capacity: 120 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 7 t Description: > Machine body: Steel S 355 N Design based on FEM analysis Side stands with two pressure tubes Floor-standing 2-component structural paint RAL 7004 / 7016 > Hydraulics & upper beam Proportional valve control, electronically monitored cylinder synchronization Press beam stress-relieved annealed, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC, fully hardened Bottom: narrow table, single V (13 × 20) Reinforced lower bed, no mechanical deflection required > Support arms 2 aluminum support arms at the front, approx. 600 mm, with tilting stops Can be moved on ball bearing linear guide Height-adjustable for dies from 55 to 100 mm > Back gauge 2-axis X-axis 950 mm, 300 mm/s, ± 0.01 mm R-axis 200 mm, 150 mm/s, ± 0.01 mm Z-axis manual with quick clamp, 2 stop fingers > Control system: Delem DA 66S 24″ touchscreen on swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety CE-compliant, Pilz safety PLC TFS laser light curtain, moving with the ram Rear light curtain > Control technology Back gauge with AC servo technology Compensation for side stand deflection and temperature-related stand expansion Dynamic press force control, LED work area lighting including lighting behind the machine

Condition: used, Year of manufacture: 2023 Price: On request - Year: 2023 - Documentation available: Yes - CE marking present: Yes Kodpfxjzcmrks Akpjdu - Operating hours: 0 - Drive system: CNC - Press force [ton]: 240 - Max. working width [mm]: 4100 - Column gap [mm]: 3600 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 260 - Tools included: Yes - Control type: Delem DA-69T Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1996, Technical specifications: Working length: 8050 mm Frame spacing: 7550 mm Press force: 340 tons CNC control: DELEM 21e with Cybtouch 15 Controlled axes: Y1/Y2; X1/X2 Stroke: 300 mm Distance table – ram: 500 mm Overhang: 300 mm Table height: 800 mm Kedpjz Abpvjfx Akpjdu Motor power: 30 kW CE marking In-floor machine Dimensions (length x width x height): approx. 8400 x 2200 x 3860 mm Weight: approx. 56 tons Accessories: various tools Condition: overall very good condition The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DELEM DA 69T control system The machine was distributed by Knuth and manufactured in Turkey. Press force 135 t Bending length 3,100 mm Distance between uprights 2,600 mm Overhang 410 mm Stroke 265 mm Opening width 485 mm Table width 108 mm Kdedpfx Akoz Hmxuepou Travel of X-axis 700 mm Rapid traverse 120 mm/s Bending speed 9 mm/s Return speed 95 mm/s Drive power Main drive 15 kW Hydraulic tank volume 250 l Dimensions (L × W × H) 3.95 × 1.95 × 2.81 m Weight 9,000 kg Some punches and dies are included in the scope of delivery (see pictures). Inspection with the machine running is possible.

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm Kdsdpfx Aoxabt Ajkpsu table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, Year of construction: 2026, functionality: fully functional, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 110 t, oil tank capacity: 200 l, total length: 3,850 mm, total width: 1,650 mm, total height: 2,680 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, CNC press brake 110 t × 3200 mm – MTP SPB 110/3200 with Delem DA-66S, 6+1 axes – NEW, IN STOCK New electro-hydraulic servo-synchronised CNC press brake with 1100 kN bending force and 3200 mm worktable, controlled by the Delem DA-66S 24" touch-screen CNC with 3D graphics. 6+1 CNC axes (Y1, Y2, X, R, Z1, Z2 + V crowning), servo main drive, laser safety guard. The machine is in stock in our warehouse and ready for immediate dispatch. KEY FEATURES • Delem DA-66S CNC: 24" full-touch colour screen, 3D graphics, automatic bend-sequence calculation, Profile-S2D offline software • 6+1 axes: Y1, Y2 (ram), X, R (back gauge depth/height), Z1, Z2 (finger positioning) + V (CNC crowning) • Electro-hydraulic servo synchronisation of Y1/Y2 with GIVI (Italy) linear scales on both sides, resolution 0.005 mm • ESTUN servo main motor – up to 60% energy saving, quiet operation • Rexroth hydraulic valve block and pump, NOK seals, EMB fittings • CNC motorised wedge crowning (V axis) – automatic deflection compensation along the full table length • Servo back gauge on Taiwan ball screws and double linear guides, 3-section adjustable stop fingers • Upper tool quick clamping (accuracy 0.02 mm), height-adjustable front sheet supports • Safety: DSP (Italy) laser guard, rear light curtain, KACON foot switch, Schneider electrics • Rigid frame verified by FEA, machined in one set-up on a CNC gantry machining centre TECHNICAL DATA • Nominal force: 1100 kN (110 t) • Worktable length: 3200 mm Kdodoz I S Dropfx Akpsu • Distance between columns: 2700 mm • Throat depth: 400 mm • Ram stroke: 200 mm • Max. opening height: 480 mm • Ram speed: rapid approach 180 mm/s, working 13 mm/s, return 170 mm/s • Ram repeatability: ±0.01 mm; positioning accuracy ±0.02 mm • Back gauge repeat positioning accuracy: ±0.02 mm • Workpiece straightness: 0.3 mm/m • Main motor: 8.5 kW servo • Dimensions (L × W × H): 3850 × 1650 × 2680 mm • Weight: approx. 7 t • Year of manufacture: 2026, CE marked STANDARD DELIVERY Press brake, levelling bolts, foot switch, operation manual, CNC manual, hydraulic and electrical schematics, foundation drawing, CE certificate. Condition: new. In stock – immediate dispatch. Terms: price net, EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Documentation and manual included. Transport can be arranged to any European destination – delivery quote on contact.

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: TrumaBend V85s Capacity: 2050 x 85 tons Control: Delem DA69 Kdsdoy Dpufepfx Akpou Axes: Y1, Y2, X, R, Z1 and Z2 Hydraulic WILA upper and lower clamping Year of manufacture: 2005

Condition: excellent (used), Year of construction: 2004, power: 25 kW (33.99 HP), stroke length: 350 mm, operating speed: 10 mm/s, total length: 6,000 mm, total width: 2,000 mm, total height: 3,400 mm, overall weight: 22,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Delem DA 65W, working width: 4,300 mm, bending force (max.): 230 t, distance between stands: 3,700 mm, control type: CNC control, number of axes: 5, actuation type: hydraulic, Press brake Kdjdpfx Ajyvh S Tjkpeu DARLEY - EHP-LS 230 43/37 MACH-ID 9469 Make: DARLEY Type: EHP-LS 230 43/37 Control: Delem DA 65W Year: 2004 Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 230T Beam stroke: 350mm Table Width: 250mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: yes Hydraulic toolclamping: yes Power: 25kW Length: 6000mm Width: 2000mm Height: 3400mm Weight: 22500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), functionality: fully functional, bending force (max.): 80 t, control type: CNC control, Equipment: documentation/manual, safety light barrier, FARINA press brake 4175 x 80, model 80/40. Motorized back gauge, CNC DELEM DA 24e – 3 axes. SCHIAVI tool holders, compensation table. Used machine. Internal code: SVR 397. Kdsdpfx Aeyv Hbtskpeu

Condition: good (used), Year of construction: 1996, machine/vehicle number: 090171, Offer 26222 Technical data: - Pressing force: 200 t - Working width: 4100 mm - Distance between uprights: 3050 mm - Table width: 220 mm - Overhang: 500 mm - Installation height: 550 mm - Approach speed: 80 mm/s - Working speed: 0 to 7 mm/s - Retraction speed: 70 mm/s - Stroke: 300 mm - Pneumatic connection - Drive: 400 V / 18 kW - Space requirement: approx. W 4800 x H 3150 x D 2200 mm Kedszuziaspfx Akpsdu - Weight: approx. 17000 kg - Includes: - Swivel arm – Control panel with DELEM DA 65 control, year of manufacture 2009 - Safety light curtain - Motorized back gauge - Punch and universal die - Two-hand control panel with foot pedal

Condition: used, Year of construction: 2019, pressure 100 t chamfer lenght 3050 mm distance between columns 3250 mm Kodpfxsv R Hvno Akpjdu Control Delem DA 66T stroke y-axis 300 mm dayligth 590 mm ajustment speed 75 mm/sec Bending Speed 20 mm/sec. backward speed 75 mm/s total power requirement 11 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 4,3x2,0x2,9 m Demonstration machine Y1 / Y2 servo electronic Hydraulic stamp clamping (WILA Premium) Hydraulic die clamping (WILA Premium) including motorized crowning Back gauge system "DENER" X-; R-; Z1-; Z2- axis FIESSLER AKAS LC II M Typ 4 (manual adjustment)with box bending Rolleri quick-change tools segmented: Punch TPR200.28.R1, die TMR100.12.30 total 3.050 mm length

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar Ksdpfxsx Ew Dqo Akpsdu - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: used, Year of construction: 1984, Technical details: pressure: 50 t chamfer lenght: 2550 mm distance between columns: 2045 mm throat: 250 mm stroke: max. 170 mm Kdsdpfxeu Ib D Ej Akpeu back gauge - adjustable: ca./approx. 800 mm control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a control malfunction ( DELEM) and will be sold as is! i.D. *