Used Coordinate Measuring for sale (7,060)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Gcjdpfxjxyungo Aaysa Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control.

Condition: used, Mitutoyo BHN 706 Co-ordinate Measuring Machine with Aberlink 3D Software, Deva Pendant Control, Servo Amplifier, Renishaw PH10T Plus Probe Head, PHC 10-3 Plus Controller, Granite Bed Area 1520mm x 940mm Between Columns including Probes & Clamping. S/No. N92090058 - 9005105102 Gsdpfx Aaox Ahcpoyjca Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2020, General Data Gcjdpfx Aasx D Hvqoysa Machine weight 2350 kg Measurements height 2700 mm Dimensions Machine Length 2100 mm Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Z-Axis Movement 500 mm Y-Axis Movement 700 mm This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. Application Types Measuring

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, input voltage: 220 V, year of last overhaul: 2018, Equipment: type plate available, CNC 3D Measuring Machine Model: WENZEL 6 10 5 CNC + MIH + TP20 + styli ● Year: 2002 Gcedpfox Ebx Aox Aayea ● Measuring range: 600 x 1000 x 500 mm ● Full CNC control ● High-stability granite structure ● Air bearing guides ● Precise, rigid, and reliable machine Equipment included: ● Renishaw MIH manually indexable head ● Renishaw TP20 probe with modules ● Set of Renishaw styli ● CNC control unit ● Complete electrical cabinet ● PC + measuring software (if present → to be confirmed) ● Clamping plate / accessories ● Documentation Condition: ● Very clean, well-maintained machine ● Last calibration: 2018 ● Machine under power → demonstration possible ● Smooth axis movement, no abnormal play Transport: ● Dismantling and transport at buyer's expense

Condition: good (used), Year of construction: 2007, 2nd unit MORA-GEMODEK Gcjdpfer Igwnjx Aayea Type: MICROSPEED 10 Year 2007 Measuring machine control cabinet with remote control.

Condition: used, Year of construction: 2012, Lot consists of: (1) measuring microscope Godpfx Ajx E Tm Ieaysca

Condition: excellent (used), Quality Vision OGP SmartScope FLASH CNC 300 For sale is an OGP SmartScope FLASH CNC 300, a high-quality multi-sensor coordinate measuring machine for precise 2D/3D measurement tasks. This system comes from industrial use and is ideally suited for quality assurance, production, toolmaking, and laboratory applications. Description: The FLASH CNC 300 is a CNC-controlled optical measuring system with optional laser and touch probe technology. It enables highly precise measurement of mechanical components – e.g. diameters, heights, distances, contours, and geometric elements. Thanks to its video technology, motorized zoom optics, and multi-sensor-capable architecture, it is particularly versatile in application. Technical Data: Model: SmartScope FLASH CNC 300 Manufacturer: Optical Gaging Products / Quality Vision International (USA) Gedpfx Aoxz A Eveayeca Measuring range (XYZ): 300 × 300 × 250 mm Max. workpiece weight: up to 30 kg System weight: approx. 160 kg Power supply: 230 V~, 50/60 Hz, 2.5 A Shipping weight (packed): approx. 340 kg Measuring Methods & Equipment: Optical video system with motorized 12:1 AccuCentric® zoom Automatic zoom calibration for highest repeatability LED illumination: - Transmitted light (profile) - Coaxial incident light - SmartRing™ LED ring light Optionally usable sensors: - Laser (TTL laser) - Touch probe / scanning probe - Microprobes / height measurement Supported software (model-dependent): Measure-X, ZONE3, etc. Fields of Application: - Quality assurance - Batch and single part inspection - Measurement of plastic, metal, and milled parts - Precision optics, mold, and tool measurement - Laboratory, production, and research Condition: used Scope of supply: (see image) (Specifications are subject to change and errors excepted!) We would be happy to answer further questions for you by phone.

Condition: used, Year of construction: 1995, DEA Scirocco - 201310 Slant Bridge Technology Co-ordinate Measuring Machine with LK Metrology Camio CMM Software, Granite Bed Size 2880mm Long, 1360mm Between Column, 11+I2:I1350mm Under Z Axis Carriage, Renishaw PH10MQ Probe Head with Probes LK Joystick Operation. S/No. 00076 (1995) Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Gsdpfex Ag T Hex Aayoca

Condition: ready for operation (used), Year of construction: 2016, Main Drive Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 1500 mm Z-Axis Movement 700 mm Additional Equipment Renishaw PH10M Plus head Air Supply: Clean compressed air required Ambient Temperature: Stable temperature (20 °C ±1 °C) required This 5-axis LEADER Miracle NC8157 was manufactured in 2016. It features a Renishaw PH10M Plus head and a range of 1500x800x700 mm, fully calibrated for precise measurements. Consider the opportunity to buy this LEADER Miracle NC8157 CMM machine. Contact us for more information. Application Types Gedex D H Efopfx Aayjca Measuring

Condition: excellent (used), Year of construction: 2008, functionality: not functional, Faro Gage Plus measuring arm with 6 axes Arm length: 4 ft (approx. 1.2 m) Accuracy: 5+8L/1000µm Includes cart, accessories, and matching transport case User manual included No software available!!! Gsdpsx Hfwnsfx Aayeca

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. Gedpfow Nylksx Aayeca The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier."

Condition: reconditioned (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 Multisensor Measuring System equipped with camera, laser, Renishaw probing system, and Hexagon Vision 3D software (upgrade to Windows 11 and OptiCheck3D 2025 possible) Complete maintenance history available Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Delivery via factory service or forwarding agent, worldwide. Online or optional on-site demonstrations with customer parts, application-specific consultation by accredited Profitech metrology laboratories during project planning. Comprehensive service: – Delivery, installation, commissioning, accuracy verification to standard, certification, and extensive acceptance documentation. Individual training and education programs also available as online courses. Rental, hire-purchase, or financing available directly through Profitech without a financial institution. Measuring system can be individually configured to customer requirements. Measuring range for all sensors: 400x400x200 mm Dimensions: 800x1000x2000 mm Weight: approx. 800 kg Maximum load (glass plate): 30 kg Gjdpfx Aaexufk Uoyjca Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) Max. traverse speed: 250 mm/s Including camera Including rotary table Including laser Including LED ring light Including new frame grabber Including dual-monitor operation Including CNC control and PC Including Hexagon Vision3D software

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Y7081050033, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 250 mm, total height: 600 mm, total width: 800 mm, total length: 1,000 mm, overall weight: 70 kg, KEYENCE XM-1500 3D Measuring Microscope, Year of Manufacture: 2018 TECHNICAL DATA & EQUIPMENT: Serial Number: Y7081050033 Control Unit: XN-1500 Measuring Head: XN-1000 Camera Image Sensor: 4 megapixel, CMOS Gcsdpfxow Rfqhe Aayja Central Wavelength for Light Capture: Near-infrared Measuring Range: 300 x 250 x 150 mm Smallest Display Increment: 1 µm Repeatability (when object stage is locked): +/- 3 µm Measurement Deviation (when object stage is locked): +/- 8 µm Maximum Load Capacity: 25 kg Measuring Probe: Number of Probes: 1 Number of Storable Probes: 7 Includes handheld measuring device, corresponding hardware, transport case, and documentation REFERENCE NUMBER 5 DIMENSIONS & WEIGHT: 1000 x 800 x 600 mm 70 kg COLLECTION INFORMATION: The item will be available from September 22, 2025. A specific pick-up date after September 22, 2025 must be arranged in advance. FCA: 75305 Neuenbürg (DE), loaded onto truck

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Gcodpfx Aaew Titlsyea Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 1000 mm Z-Axis Movement 700 mm Gjdpfx Aex D Nrhsayjca Additional Equipment Probes: 2 included This 3-axis Wenzel XO 87 was manufactured in 2010. It features a robust CMM machine design with X-axis travel of 800mm, Y-axis at 1000mm, and Z-axis at 700mm. If you are looking to get high-quality measuring capabilities, consider the Wenzel XO 87 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: used, Werth Type: Werth SCOPE- CHECK 400 3D coordinate measuring machine Technical data: Measuring capacity (X x Y x Z) : 400 x 200 x 200 [mm] Work table with integrated electrical cabinet : 1600 x 950 x 780 [mm] Max. Weight on table : 20 [kg] Operating conditions, * relative humidity, 40 - 70 [%] * Temperature; 10 - 40 [°C] Measuring precision (20°C, 8 kg, magnification 5X, resolution 0.5 micron) On table, E1 = 1.8 + L/120; E2 = 2.0 + L/150 All positions, E1 = 2.5 + L/120; E2 = 2.9 + L/100; E3 = 4.5 + L/75 Incremental dimensions Ball screw drive with servo motor Optical magnification (video) : 0.5X to 5X Optical field (video) : 13 x 10 [mm] to 1.3 x 1 [mm] Movement on linear guide with ball Combinable illumination : diascopic, episcopic ring LED/axial Voltage: 230 [V] Frequency: 50 [Hz] Gsdpju Iub Rjfx Aayjca Power: 2 [kW] Weight: 300 [kg] Accessories CN Lighting Control via software Video sensor IP for detection of measuring contour (screen display) Electronic control for table movement Manual control for table by joystick Predisposition for mechanical probe Calibration, 3D measurement, probe communication software Scope of delivery: (Werth coordinate measuring machine with accessories as shown) Condition: used (Changes and errors in the technical data, specifications are reserved!) Please ask about transportation options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 1908 mm Measurements depth 1277 mm Measurements height 2777 mm Machine weight 1265 kg Main Drive Number of axis 3 Movement X-Axis Movement 700 mm Y-Axis Movement 1000 mm Z-Axis Movement 660 mm Additional Equipment Compressed Air Supply: Min Air Pressure: 0.5 MPa /Max Air Consumption: 70 NI/min / Min Supply Pressure: 0.5 MPa (5 bar) / Min Flow at Input (ANR) UNI ISO 8778: 7.5 dm³/s Compressed Air Quality: Max Oil Concentration in Air: 5 mg/m³/ Max Size of Solid Particles in Compressed Air: < 0.04 mm / Max Concentration of Solid Particles in Compressed Air: 3(*) Dynamic Performance: 3D Positioning Speed: 510 mm/s / Max Acceleration: 1700 mm/s² / Resolution: 0.039 µm Gcsdpfxox D Em Us Aayoa This 3-axis Hexagon GLOBAL CLASSIC was manufactured in 2019. Ideal for precise measurements, this CMM machine represents a reliable solution for enhancing quality control processes. Consider the opportunity to buy this Hexagon GLOBAL CLASSIC CMM machine. Contact us for more information. Application Types Measuring

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: Gedpfoxcwxgjx Aayoca - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: ready for operation (used), Year of construction: 2018, Main Drive Number of axis 3 Movement X-Axis Movement 220 Y-Axis Movement 150 Z-Axis Movement 100 Godpfxox D Sdto Aaysca This 3-axis SCHUT DeMeet-200 was manufactured in 2018. Ideal for precise measurements, this CMM machine represents a reliable solution for quality control environments. Consider the opportunity to buy this SCHUT DeMeet-200 CMM machine. Contact us for more information about this machine. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements width 1041 mm Measurements depth 1499 mm Measurements height 1880 mm Machine weight 620 kg This DEA Global 050705 Performance CMM machine was manufactured in 2009. It features a machine weight of 620 kg, operating voltage of 230 V/50 Hz, and pneumatic pressure of 6 bar. Dimensions include a width of 1041 mm, depth of 1499 mm, and height of 1880 mm. The working space is 700 x 500 x 500 mm. It comes with PC dmis software and a Dell T5810 computer. Contact us for more information about this machine. Gcodpfx Asx D Rk Soaysa Application Types Measuring

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 3120 mm Measurements depth 2505 mm Measurements height 4125 mm Machine weight 5530 kg Main Drive Number of axis 3 Movement X-Axis Movement 1500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1200 mm Table Table load 4500 kg Additional Equipment 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system Ø 30 mm reference sphere INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer General Data Measurements width 3120 mm Measurements depth 2505 mm Measurements height 4125 mm Machine weight 5530 kg Main Drive Number of axis 3 Movement Gcjdpex D S Dmjfx Aayja X-Axis Movement 1500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1200 mm Table Table load 4500 kg Additional Equipment 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system Ø 30 mm reference sphere INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer This 3-Axis Mora Primus 152012 was manufactured in 2019. It features a large measuring range with X-axis at 1500 mm, Y-axis at 2000 mm, and Z-axis at 1200 mm. Supports a maximum load of 4500 kg, ensuring robustness for various tasks. With a vector speed up to 519 mm/s, it offers efficient operations. If you are looking to get high quality measuring capabilities consider the Mora Primus 152012 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2007, Additional Equipment Measuring Probe: Renishaw TP20 Probe Change: MCR20 (6 pieces) Software: “ThomControl” (with new software version retrofitted in 2018) Gcedox D Rymspfx Aayoa This THOME Prazision 3D Sigma was manufactured in 2007. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Consider the opportunity to buy this THOME Prazision 3D Sigma CMM machine. Contact us for more information. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 890 mm Measurements depth 788 mm Measurements height 939 mm Machine weight 180 kg Main Drive Number of axis 3 This 3-axis Hexagon Optiv Performance 322 was manufactured in 2019. Ideal for precise measurements, this CMM machine represents a reliable solution for enhancing quality control processes. Consider the opportunity to buy this Hexagon Optiv Performance 322 CMM machine. Contact us for more information. Application Types Measuring Gcedpex D H Nwefx Aayea

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements width 4540 mm Measurements depth 1400 mm Measurements height 4260 mm Main Drive Number of axis 3 Movement X-Axis Movement 5000 mm Y-Axis Movement 2500 mm Gcjdpfex D Rwfjx Aayea Z-Axis Movement 1200 mm Additional Equipment software Camio studio This 3-axis measuring machine was manufactured in 2009. The SHIN NIPPON KOKI MM 2500-5012 offers expansive dimensions and capabilities, with an effective distance between columns of 3500mm and axis movements of 5000mm on the x-axis, 2500mm on the y-axis, and 1200mm on the z-axis. It features a maximum feed rate of 10,000 mm/min, supported by AC servo motors, ensuring precise and rapid positioning. The expansive measuring range makes the SHIN NIPPON KOKI MM 2500-5012 machine we have for sale ideal for large-scale precision measurements. For more information on this highly capable machine, please contact us today. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 870 mm Measurements depth 1245 mm Measurements height 1580 mm Machine weight 700kg Main Drive Number of axis 3 Gcodpfjx D Sa Iex Aayoa Movement X-Axis Movement 400 Y-Axis Movement 400 Z-Axis Movement 200 Additional Equipment Usage: Hardly ever in use This 3-axis SCHUT DeMeet 404 was manufactured in 2017. It's a reliable CMM machine, ideal for precise measurements in quality control processes. Consider the opportunity to buy this SCHUT DeMeet 404 CMM machine. Contact us for more information. Application Types Measuring