Used Conveyor Chain for sale (11,724)

Condition: new, Conveyor belt length: 22,000 mm, Conveyor belt width: 3,750 mm, Overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc. G0Kevhyy

Condition: used, Chain conveyor - IDL000773 - length: 6,1 m Ctiqczvwb3 - working width: 600 mm - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw.

Condition: used, Length: 6 m Csk2K2Du Chain conveyor for board packs: - Length: 6 m, - Between chains: 1,45 m/1,35 m, - Rails: 3 pcs.

Condition: used, Chain conveyor Idl000736 - length 2.3 m, Qjwq9Ygby - width 2.7 m, - height 1.4 m - electric motor 0.75 kW.

Condition: used, Length: 7,5 m Gjgf9G Electric motor: 1,1 kW each rail Chain conveyor for board packs - Length: 7,5 m, - Electric motor: 1,1 kW (each rail).

Condition: used, Chain conveyor Idl000737 Xspmpjv - length 1.9 m, - width 2.80 m, - height 1.40 m. - no electric motor

Condition: used, Roller conveyor with chain cross conveyor Can be used after resaw. - Electric motor: 1,1 kW - Electric motor: 0,75 kW Roi37 - Electric motor: 1,1 kW

Condition: used, Chain conveyor ID000341 - outfeed after edger - electric motor: 4 kW Cvbn7Pkb

Condition: good (used), Year of construction: 2013, Paal chain belt conveyor, type KES-1750, year of construction 2013, effective width 1750 mm Technical data: Manufacturer: Paal Type: KES-1750 Year of construction: 2013 Drive power: 5.5 kW Speed: 0.29 m/s Max. bulk density: 175 kg/m³ Center distance: 20,000 mm Feeding conveyor: 8,000 mm Rising part: 8,688 mm Gooseneck: 1,075 mm Pan depth (horizontal/rising): 500/1000 mm Angle of incline (rising/falling): 30/-20° The operating instructions and CE declaration are available in German. The conveyor belt is currently still in operation and will be available in mid/end January 2025. Viewing is possible at any time by arrangement. Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by prior arrangement. The sale is ex location, without guarantee and warranty. Our terms of payment are 100% prepayment. Krjdbar

Condition: used, Functionality: unexamined, We are selling a total of four trough chain conveyors from Knoblinger. Dimensions: Total length 6.60m x width 0.70m x height 0.62m Sbzzy9L3 Opening dimensions: 500mm

Condition: excellent (used), Year of construction: 2008, Very well maintained stable roof chain cross conveyor. With 8 chain strands. Unsupported. Length approx. 5.0 m. Shot width 1,650 mm. Chain spacing: 600 - 600 - 600 - 600 - 500 mm Fully plated. Roller chain with bolted-on carrier. Brly8Dj9Tic Drive via gear motor with chain clutch.

Condition: repair required (used), Year of construction: 2011, Functionality: unexamined, SEGEM vibrating conveyor (1 piece) and scraper chain conveyor (4 pieces) used, not overhauled, condition: see photo Make: SEGEM Year of manufacture: 2011 consisting of: 1 piece Vibrating conveyor with eccentric shaft drive - Width: approx. 640 mm - Length: approx. 7,000 mm - Trough height: approx. 240 mm - Total height: approx. 670 mm - Drive power: approx. 3.0 kW 1 piece Scraper chain conveyor no. 1 - conveying on top - Design: L-shaped - Width: approx. 700 mm - Total length: approx. 6,400 mm - Drive power (SEW): approx. 2.2 kW 1 piece Scraper chain conveyor no. 2 - conveying on top - Design: Z-shaped - Width: approx. 700 mm - Total length: approx. 15,000 mm - Drive power (SEW): approx. 2.2 kW 1 piece Scraper chain conveyor no. 3 - conveying on top - Design: straight - Width: approx. 600 mm - Total length: approx. 7,700 mm Ccctyyw - Drive power (SEW): approx. 1.5 kW 1 piece Scraper chain conveyor no. 4 - conveying on top - Design: Z-shaped as distribution conveyor - Width: approx. 600 mm - Total length: approx. 22,000 mm - Drive power (SEW): approx. 4.0 kW - incl. 3 pneumatic cylinders (flap opening) without electrical installation Warranty: none Location of the system: 88287 Grünkraut (Germany) System is available immediately Suitable for screening the following bulk materials, among others: Wood chips, wood chips, wood shavings, sawdust and sawdust, biomass, wood pellets, cross-cuts, charcoal, waste wood, bark and much more.

Condition: used, Year of construction: 2009, Operating hours: 20,536 h, Technical data baler: Fzja9Tg Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ?difficult? materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Due to a reorganisation of the manufacturing processes within the company, a new baling line is being built in a new hall. The old baling press with conveyor technology is therefore no longer required and is expected to be available for sale at the beginning of 2025. Technical data for the chain belt conveyor: Manufacturer not known Type not known Length of feed belt 5,300 mm Length of ascending belt 12,700 mm Overall height 7,300 mm Useful width 1,200 mm Unfortunately, no further technical data, documentation or drawings are available. Condition of the press system: The entire system is in very good condition and is regularly cleaned and maintained by the operator. The quality of the bales is exceptionally good, as you can see from the photos of the pressed bale goods. Even hard plastics such as plastic crates, PP bucket chains and PE plastic drums were pressed into dimensionally stable bales with the fourfold vertical binding. Tidiness, cleanliness and maintenance of the systems are practised in this company and not just written on the website. Scope of delivery: Avermann baler, type AVOS 1410-45/80, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available in full. Unfortunately, there is no more documentation for the conveyor belt. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: good (used), Year of construction: 2000, was used to transport wood chips from the chipper. Beiwhja

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Cs2U3H8Npa Optional: Supports Side guide Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Functionality: unexamined, We sell various trough chain conveyors from Knoblinger: Bknrk0Ke890 Dimensions for two trough chain conveyors: length 4.00m, conveyor width approx. 400mm Dimensions for one trough chain conveyor: length 4.60m, conveyor width approx. 400mm Dimensions for one troughed chain conveyor: length 3.00m, conveyor width approx. 400mm

Year of construction: 2016, Condition: good (used), Numerous chain conveyors and silos of different volumes available Bgkrcox29Zy 3,500€ each

Condition: used, Year of construction: 2023, Operating hours: 1,851 h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h Dpkru2 bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Coqzjfhd Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Castel chain conveyors 250 mm wide case - Reference TR4 length 12.6 m - Reference TR 3 length 5.8 m. - Reference TR 6 length 13.5 m - Reference TR 30 length : 11 m Price : 350€/m Dociad

Condition: used, Year of construction: 2008, Technical data baler: Manufacturer Klanke Type KBST 80 Year of construction 10/2008 Pressing force main press 80 tonnes Theoretical throughput 225 m³/hour Bale dimensions 1,050 x 760 mm, variable length Drive power 2 x 30 kW Connected load, total 75.5 kW Tying 4-fold horizontal, fully automatic Bale weights with a bale length of approx. 1.2 m approx. 400 up to 500 kg, depending on material Hydraulic oil tank capacity 1000 litres, oil type HLP 46 PLC control Siemens Simatic S7-200 Control panel Siemens Simatic Touch Space required baler, set up with hopper and conveyor belt 8,585 x 17,450 x 4,395 (l x w x h) Effective transport dimensions excluding press 8,585 x 2,210 x 2,800 mm ( l x w x h) Transport weight press 17 tonnes Condition of the baler: The machine worked without any problems until the conveyor belt broke down. It was then decided not to have the conveyor belt repaired but to sell the entire pressing system. The last maintenance was carried out on 29/06/22. Technical data conveyor: Manufacturer APULLMA Maschinenfabrik, Germany Type chain belt conveyor Year of construction 2008 Length of infeed belt 5,975 mm Length of ascending belt approx. 8,500 mm Length of gooseneck 2,000 mm Useful width 1,600 mm Pit dimensions to the conveyor belt 10,300 x 2,500 x 1,200 mm Condition of the conveyor: The chain of the conveyor belt is torn, some crossbars are bent and the rubber covering is also torn. The conveyor belt must be repaired and overhauled. Scope of delivery: 1 piece APULLMA chain belt conveyor, defective 1 piece Klanke KBST 80 press 8 pcs. wire roll hater with wire Dpshnh 1 bale chute Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2013, Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 D2Ee3A Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Oinorqb Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Shhdd Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Transnorm roller conveyor Chain overdrive 2515-670-620 Deipxkln RA1870 Make: Transnorm Roller width (RB): 620 mm Nominal/outer width (NB): 670 mm Length: 2515mm Diameter rollers: 50 mm Distance between rollers: 80 mm Frame height: 120 Roller conveyor motor: SEW drive motor with frequency converter Conveyor speed: freely adjustable with frequency converter Can be shortened in 80 mm steps Additional roller conveyors can be connected via the chain drive and driven by a motor. Optionally available: Supports Side guide one and both sides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics