Used Cold Press for sale (13,575)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) Hodpfx Ajw Sgnkokijw - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, stroke length: 200 mm, throat depth: 400 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table height: 900 mm, oil tank capacity: 350 l, overall weight: 16,950 kg, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, clearance between the columns: 3,820 mm, distance table to ram: 400 mm, ram plate length: 4,270 mm, table length: 4,270 mm, table width: 120 mm, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 • Top tool clamping PP3090 – Wila Hodpfx Aoz Eqwlskisw • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg

Condition: ready for operation (used), Year of construction: 1984, stroke length: 60 mm, controller manufacturer: SIEMENS, Mechanical stamping press manufactured in 1984. This KAISER V50W High-Speed Press underwent a complete mechanical and electrical overhaul in 2022, featuring a new Siemens control system and a SEW 59 kW main motor. It offers a pressing force of 500 kN and a stamping speed of up to 400 strokes/min. If you are looking to get high-quality stamping capabilities, consider the KAISER V50W High-Speed Press we have for sale. Contact us for further details. • Retrofit/overhaul: Complete mechanical and electrical overhaul in 2022 (approx. €50,000) Hsdpfjz E Ikijx Akisw • Stroke: 8–60 mm • Ram adjustment: 80 mm • Stamping speed: up to 400 strokes/min • Table size: 800 × 550 mm • Main motor: SEW 59 kW (installed 2022) • Control system: Siemens (new electrical system and cabinet in 2022) • Operator panel: Siemens SIMATIC HMI • Press force monitoring: UNIDOR • Condition: Very good, ready for operation Technical Specification Stamping Force 500 Kn

Condition: good (used), Year of construction: 2004, Well-maintained, used press brake from Ermaksan. Hjdpfxjz Aihms Akijw Type: AP 2600 80 Capacity: 2600 x 80 tons NC control Includes a set of tooling.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,216 h, machine/vehicle number: 7.376.230.761, controller model: Durma DT-15, working width: 4,050 mm, stroke length: 365 mm, throat depth: 630 mm, pressing force: 400 t, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Hjdpozzbafsfx Akiew Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Finger guard CE marking CE certificate Documentation Tools

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 183610114, functionality: fully functional, stroke length: 1,200 mm, empty load weight: 1,500 kg, working width: 3,000 mm, working height: 1,710 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Max. clamping width: 3,000 mm Max. clamping height: 1,710 mm Max. clamping depth: 100 mm Hodpezzbb Nsfx Akijw Number of cylinders: 4 pcs Cylinder stroke: 1,200 mm Horizontal and vertical cylinders: Separately controlled MACHINE DETAILS Voltage: 400 V Current consumption: 3.5 A Fuse rating: 16 A Main motor power: 1.5 kW Connected power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 2,880 mm Unladen weight: 1,500 kg Number of transport packages: 1 pc EQUIPMENT Remote control

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Hjdpfsz Nhp Isx Akiew

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Hodpfx Akjz Ib R Ioiow Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Laminated panel press from our showroom; Hodpob Eln Djfx Akisw Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: good (used), functionality: fully functional, Year of construction: 1992, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Control system: LVD MNC 95 Total power consumption: 14 kW Hjdjz I N Hwjpfx Akisw Machine weight (approx.): 7,700 kg

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Type PR10 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Wila upper and lower clamping system Tools not included Hodpfsz H Udlsx Akiew

Condition: good (used), Year of construction: 1995, EISELE circular saw Model VME 350 Hodpfez Imqysx Akijw

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Hedpfxjz H I E Ae Akisw Pre-compression force 28 t Main compression force 85 t Infeed chute 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume output: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (L x W x H) Weight approx. 27,000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operation. The horizontal tying is currently not functioning. The technical documentation is available. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter changed Vertical tying system overhauled and made operational. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty. Our payment terms are 100% advance payment.

Condition: good (used), Year of construction: 2005, stroke length: 1,000 mm, throat depth: 400 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, overall weight: 9,650 kg, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, power: 7.5 kW (10.20 HP), pressing force: 120 t, clearance between the columns: 2,550 mm, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 MACH-ID 9820 Make: SAFAN Type: H-Brake 120TS1 Control: TS1 YOP: 2005 Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Hsdpfxoz Hka Aj Akiew Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,828 h, functionality: fully functional, machine/vehicle number: 61700170, total width: 2,300 mm, total height: 3,300 mm, total length: 9,200 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hsdpez Ea Rbjfx Akiew General information Year of manufacture: 2016 Operating hours: 1,828 h Serial number: 61700170 Color: Blue CE certificate available: No Documentation available: No MACHINE DETAILS Dimensions and weight Overall length: 9,200 mm Overall width: 2,300 mm Overall height: 3,300 mm Unladen weight: 10,000 kg Transport data Transport dimensions: 9,200 × 2,300 × 3,300 mm (L × W × H) Transport weight: 10,000 kg Transport packages: 3 pcs.

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Hjdpfx Akeyapdqoiow Opening: 325 mm Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: good (used), Year of construction: 1996, Well-maintained, used press brake from Beyeler / Bystronic. Type PR6 150 4100 Capacity: 4100 x 150 tons Cybelec DNC 880S Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Includes a set of tools. Hjdpfx Akszbhh Roisw

Condition: good (used), functionality: fully functional, Year of construction: 2008, Well-maintained, used E Brake by Safan Hodpfx Akjzbhk Ejijw Type E Brake 100 3100 Capacity 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Manual crowning Hydraulic Wila NS top clamp

Condition: good (used), Year of construction: 1991, Used squaring shear from Haco Type TS 3012 Hodjzhbglepfx Akijw Capacity: 3050 x 12 mm Adjustable back gauge Blades recently sharpened

Condition: used, Year of construction: 1992, Used 4-meter CNC press brake from Haco Type: PPES 40200 Capacity: 4100 x 200 tons FastBend 2D CNC control (refurbished!) 1 set of complete tooling (not visible in the pictures, but included) CNC crowning Euro-style tool clamping system Hedpfxjzgt Tze Akiow

Condition: used, Year of construction: 1993, Used 3 meter CNC press brake by Safan Model: CNCL 80 3100 Capacity: 3100 x 80 tons Y1, Y2, and X axes CNC controlled Hedpfx Aksy Nydzeiow CNC crowning Flat pressure table Year of manufacture: 1993

Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) Hodpfx Aszcdlujkiow with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: good (used), Year of construction: 2003, Used 2.5 meter press brake from Ermaksan Model: AP 2600 60 Capacity: 2600 x 60 tons Elgo NC control 1 set of tools Year of manufacture: 2003 Hsdpeyykkmjfx Akisw

Condition: refurbished (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 20658, stroke length: 250 mm, throat depth: 305 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table height: 980 mm, oil tank capacity: 350 l, overall weight: 22,500 kg, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 320 t, clearance between the columns: 3,760 mm, distance table to ram: 500 mm, ram plate length: 4,500 mm, table length: 4,800 mm, table width: 250 mm, type of input current: three-phase, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Hodpfx Aszktg Ajkisw Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: used, Year of construction: 1998, pressing force: 100 t, For sale is a used die-setting press from the manufacturer REIS with a maximum pressing force of 100 tons. The machine has a table size of 1,100 × 800 mm, a maximum installation height of 950 mm, and numerous features, including an ejector in the table, oil connection boxes for core pulls, and a 180° pivoting ram plate. It is therefore particularly suitable for die-setting operations, tool try-out, and testing in mold and tool making. ##### Technical Data + Information: Die-setting press – 100 tons – 1,100 × 800 mm ==== General Information - Design: 4-column die-setting press - Manufacturer: REIS - Type: TUS 80–100 - Year of construction: 1998 - Pressing force: 26–100 tons (adjustable) - Retraction force max.: 45 tons - Table size: 1,100 × 800 mm - Max. table load: 5,000 kg - Installation height max.: 950 mm - Overall dimensions (W x D x H): approx. 2,100 × 3,395 × 3,670 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ==== Hydraulic Cylinder - Pressing force range: 26–100 tons - Retraction force: 45 tons ==== Hydraulics & Drive - Hydraulic pump: REXROTH SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Working pressure max.: 200 bar - Pressure accuracy: ±5 bar - Tank volume: 200 l - Hydraulic oil: HLP 36 ==== Motion System - 180° pivoting ram plate - Load capacity of the pivoted ram plate: up to 3 tons - Ejector in the ram: 3.5 tons - Ejector stroke: 130 mm - Extendable table - Table can be tilted to both sides - Movable ejector in the table - Oil connection boxes for core pulls - Injection molding filling device in the ram - Quick clamping plate on the ram ==== Control - Operation via control panel Hodpfx Akoxd Tiqsiow - Press force setting - Operation of core pulls - Control: Siemens / Pilz - Digital measuring device ==== Safety - Industrial machine control - Operator panel with safety functions ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 7.5 kW - Total connection power: 10 kW ##### Application areas: Die-setting, tool try-out, mold making, tool making, injection molding tools, automotive, prototype construction, trial tools, maintenance, production preparation (Die-setting press, try-out press, tool try-out press, hydraulic press, REIS TUS 100, 100 ton press, 4-column press, testing press, mold making press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety standard NR 12, which is based on these. Our core strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.