Used Cloos Glc 456 C for sale (52)

Condition: good (used), Year of construction: 1994, machine/vehicle number: 229, Offer 22437 Hsdpop H Tavefx Aacofn Technical data: - Welding current max. 450 A / 36 V 60% ED - 350 A / 32 V 100% ED - Welding current adjustable in 2x 18 switch steps 60 - 450 A - 2 cycle + 4 cycle regulation , points , interval - 2 roller wire feed steplessly adjustable in separate - wire feeder case CLOSS , CK 68 C - intermediate package machine - wire feed approx. 6 running meters - hose package water cooled approx. 4 running meters - ground cable - pressure reducer - connection 400 V / 19 KVA - space requirement approx. W 490 x H 1200 x D 1100 mm - Weight approx. 180 kg

Condition: excellent (used), Year of construction: 2003, Cloos GLC 451 C welding machine. Year of construction: 2003 Hedpfjtkurijx Aacjfn With welding package

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 5668430QC5A, travel distance X-axis: 10,000 mm, torque: 4,000 Nm, TECHNICAL DETAILS Travel path X-axis: 10,000 mm Moment of inertia: 200 kg/m² Torque: 4,000 Nm Swivel moment: 10,000 Nm Clamping plate size: approx. 1,000 x 1,200 mm MACHINE DETAILS Power (welding wire feeder): 4 kW Power (Cloos QIROX-C QRC350): 40 kVA EQUIPMENT 2 welding positioners (left/right), Type: WPEK-25000N Rotary unit Welding robot, make: Cloos-Bauer, Type: BPF4001/2/4 Welding wire feeder, make: ESAP Extraction unit Rail-guided Hfodpfxexgqy Es Aacjn Separate welding units, make: Cloos, Type: GLC603 Quinto Separate control unit Corrugated sheet metal enclosure with 2 sliding doors

Condition: used, MIG MAG welding machine, shielded gas welding machine CLOOS Type GLC 357 N MIG MAG welding power source Serial No. 576 Year of manufacture: approx. 1985 Rated output: 350 Amps Output: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Infinitely variable adjustment range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roll drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder - Welding machine equipped with 1 mm welding wire Hjdpehubg Tefx Aacefn Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg

Condition: excellent (used), Year of construction: 2018, Very well maintained Quinto 603. Multiple machines of this type are available. Hfodpfx Aajw Exytscon

Condition: good (used), Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm Hsdpfewubqtex Aacsfn -Weight: 4.2 kg

Condition: excellent (used), Year of construction: 2012, CLOOS GLC 403 Quinto welding machine. A total of nine Cloos 403 machines are available. Year of manufacture: from 2005 to 2012. Hfjdpfjtkunuox Aacsn Other models of the Cloos 503 welding machines are in stock

Condition: used, Year of construction: 1994, Technical details: welding current - continuous: 40...400 A Length: 900 mm height: 1200 mm total power requirement: 13,8 kVA weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m Hjdeu Nwx Uopfx Aacjfn MIG MAG Welding device -welding transformator as spare part donor - capacity 40A/15V up to 400A/34V - open circuit voltage -58V - characteristic constant - protection type IP23 - isolation type F - water cooled Circuit board A5 missing! *

Condition: good (used), Year of construction: 1993, Inert gas welding device, inert gas device Hfedob Uw Nropfx Aacsn -Max. Welding power: 350 A. -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package: 2.8 m -Dimensions: 1100/640/H1090 mm -Weight: 190 kg

Condition: used, Inert gas welding device, inert gas device -Max. Welding power: 320 A. Hfsdpfjb A Hhvsx Aacen -2 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg

Condition: excellent (used), Year of construction: 2013, Plasma cutting machine manufactured by Cloos for processing sheet material and pipes. Program operating hours: 1,687 hours, very low operating hours. Large-format plasma cutting system. Cutting system: Cloos Quirox Plasma source: Hypertherm Program operating hours: 1,687 hours, very low operating hours. Performance data: Cutting capacity (non-alloyed steel): - Burr-free cutting: 32 mm - Piercing (production): 38 mm Hfodpfxexn Ihpo Aacon - Maximum cutting capacity: 64 mm Cutting capacity (alloyed steel): - Piercing (production): 32 mm - Maximum cutting capacity: 50 mm Cutting capacity (aluminium): - Piercing (production): 25 mm - Maximum cutting capacity: 50 mm Including complete extraction unit With guard and enclosure

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 348 mm Hodexmbxfepfx Aacjfn Measurements depth 714 mm Measurements height 553 mm Machine weight 84 kg Main Drive Number of axis 6 Max payload 4 kg Additional Equipment Delivery includes: 4m fixed connection cable, 8m connection cable, robot accessories for welding technology This CLOOS Qirox Micro Cell 1.1 M was manufactured in 2021. It features a robust welding robot with a payload capacity of 4 kg and a working area diameter of 3740 mm. The compact design includes dimensions of 714 x 348 x 553 mm and a weight of 105 kg. Always serviced and like new, with a new battery installed. Contact us for more information about this machine. Application Types Welding

Condition: used, Cloos Romat 320 robot arm Hodpfx Aoxltxujacsfn

Year of construction: 2018, condition: ready for operation (used), A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible. Hjdpfxsxnz Upj Aacjfn

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Cloos Welding Robot Cell Welding Power Source: MSG Multi-process Welding Unit Qineo Start 402 Premium Configuration Technical Data Welding current at 100% duty cycle: 400 A Open-circuit voltage: 78.7 V at 3 x 400 V / 74.6 V at 3 x 380 V Mains voltage: 380V - 480 V / 3-phase Connection cable: 4 x 6 mm² Hfjdexc D Axopfx Aacsn Delayed fuse: 32 A Protection class: IP 23 Insulation class: F Cooling type: F Dimensions (L/W/H): 714 x 348 x 553 mm Weight: 84 kg Including: - Wire feeder - Torch hose package - Connecting hose package - Robot torch MRW

Condition: excellent (used), Year of construction: 2011, Cloos Qirox robot QRC 320 incl. control unit V 6, Hodpfxoizklnj Aacsfn Offline laser ( instead of gas nozzle sensor for fast search process, arc seam search, spot editor Quinto II 603 welding machine (600 A pulse machine), wire feeder, 1 workpiece manipulator HWR 30000, 2 workstations, pick-up weight per station 2500 kg, face plate distance 4500, turning radius 750 mm Floor track with C stand, travel distance 4 m, for suspended arrangement of the robot Light barrier, start preselection Option: conversion from 320 to 350 ( enlargement of working area possible)

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: CLOOS wire feeder, water-cooled -Type: lCK98A -Dimensions: 660/390/H350 mm Hfedpfx Aowrrp Ujacjn -Weight: 23 kg

Condition: ready for operation (used), Year of construction: 2019, Main Drive Max payload 15 kg Media Power consumption 36 kVA This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Application Types Hedpfoxcb N Nex Aacofn Welding

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 306 431, type of input current: three-phase, total height: 2,165 mm, total width: 1,800 mm, total length: 3,000 mm, overall weight: 1,250 kg, input voltage: 400 V, type of cooling: air, Equipment: cabin, Machine year 2021, bought used December 2022, checked / repaired / adjusted by specialist company in April 2023. Only run for a few hours in trial operation since then. Hfjdpfxeulw E Sj Aacen

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, arm reach: 3,785 mm, type of input current: AC, total height: 6,000 mm, total width: 12,000 mm, total length: 64,000 mm, load capacity: 1,959 kg, Offered for sale is a powerful CLOOS Qirox welding robot system, available from ongoing production. Year of manufacture: 2001 Complete retrofit: 2010 (robot arm, control system, and key components renewed) Availability: From December 2025 Key Features: - Robot: QRC 410 with RIV5A Qirox control system - Laser-assisted seam tracking for precise welding and high repeat accuracy - Two workstations each equipped with a swiveling rotary-tilt table (360°): Table 1: Load capacity 1.5 t Table 2: Load capacity 2.5 t - Large gantry providing access to both workstations - Additional axis: 1200 mm vertical, robot movable - Required installation space (HxWxD): approx. 6 × 12 × 6.4 m Retrofit 2010 (excerpt from documentation): - Rotrol I (V4A) cooling module 500 W incl. cabinet preparation & cooling unit - PC coupling Rotrol side, RI option from V04 - 15" TFT display (RI option from V05) - Arc sensor - Software extensions: • Point editor in robot control system • Parameter interpolation (travel-dependent transition between parameter lists) - Fiber optic PHG cable extended to 15 m - External encoders for WPV 50 + 75,000 N - Base plate adapter R310 to Qirox Welding technology: - QINEO CHAMP 450 CW with integrated water cooling - Seam tracking unit - VSP 15 m, QWD-A wire feed drive, OMI or CAN-Bus (where available) - BSP 3.5 m, RPU Premium with 10 m cable - Integrated connection control incl. power supply Included in delivery: - Welding robot - Gantry - 2x table - Fume extraction unit - Comprehensive accessories - Documentation Condition & Delivery: - Technically flawless, regularly serviced by Cloos customer service - The system is in active production until December and can be inspected while in operation. Afterward, it will be disassembled, loaded, and shipped upon request. Numerous additional photos and demonstration videos available Inspection by appointment possible Loading, transportation, and recommissioning can be arranged Price and further details on request. Hfedpfx Aoxgudzeacen For inquiries or to schedule a viewing, we are always available. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection ----- 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Hedjrmulvjpfx Aacofn Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm N...

Condition: good (used), Year of construction: 2005, functionality: fully functional, Cloos welding robot ROMAT 320 with ROTROL II control system incl. Gas nozzle sensor, arc seam tracking, hard disk, point editor, 16 I/O, programming pendant with 8 m cable base stand for robot mounting with robot accessories Welding machine Quinto II 403, wire feeder, mechanical cleaning, pressure amplifier, DUO drive wire feed Hfedpfoxghrrox Aacen 1 welding torch MRW 380, 1 torch hose package initial equipment for steel 1.2 mm, torch test gauge torch holder with safety shut-off diagonal axis 1 safety for 2-station operation, robot standstill monitoring connection cable for robot control as well as manipulator control, length 5 m 2 start preselection panels incl. cable, 2 light barriers intermediate control integrated for the 2 L manipulators WPEK 5000, load capacity 500 kg, swivel radius approx. 800 mm Special price for disassembly by week 46

Condition: new, Year of construction: 2024, Training system consisting of: 1 welding robot Qirox QRC 350 including control unit, programming handset, 24 V buffering, computer interface (PC side cabinet), 2 GB flash drive Gas nozzle sensor, arc seam tracking, multilayer welding technology, spot editor, Qineo Next 452 with premium control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, Floor rail 20 kN, travel path 6 m, robot is mounted on a C-frame in suspended position. 2 turning device with counter bearing TC 5 kN, load capacity 1000 kg, clamping length 3.0 m, interface control, 4 light barriers, 2 start preselection Hfedpscmbnyofx Aacsn Delivery time: 6–8 weeks Warranty: 24 months

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, 1 cloos welding robot QRC 300 ( year 2022 only 1258 hours) incl. control QC 2 ( year 2020, new PC 2022), teach pendant incl. cable Gasnozzle sensing, point editor Pedastal for robot Cloos welding machine Qineo Puls 350 (350 A pulsed arc machine), wire drive, torch, torch hose package, connection hose package, mech. torch cleaning 2 stations turning table incl. 2 turning devices QR-WP-TC 1,5 kN load capacity/station 150 kg, swing radius 400 mm, 1 light beam, 1 start stop box, 1 safety wall on turning table 1 safety switches for service door incl door Hjdpfxsiyp Nae Aacjfn Base frame between robot and workpiecemanipulator delivery time: about 8 weeks. Subject to prior sale.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 29,000 h, Cloos welding robot system consisting of: ROMAT 350 robot with ROTROL II V4 control unit (optionally upgradable to version 2025), gas nozzle sensor, arc seam tracking, point editor, Qineo Puls 600 welding machine (600 A), wire feeder, MRW 510 evo welding torch, torch hose package, mechanical cleaning system, pressure amplifier. 1 L manipulator WPEK 25000, load capacity 2500 kg, turning radius 1500 mm, loading height 945 mm. 1 C stand with vertical slide, travel distance 1500 mm, boom length 2750 mm. Light barrier, start preselection. Hedpfxow Razzj Aacsfn The system is in excellent condition and was only used for simple TIG welding tasks. Overhauled and serviced prior to delivery.