Used Canned Filling for sale (25,864)

Condition: like new (used), 12fill VMP semi auto filling machine Nsdohpqvyjpfx Acmjlc semi auto filling machine with volumetric dosing system, ideal for pastes, creams, sauces and pates, 100ml to 1000ml, up to 25 fills per min, mobile frame with foot pedal

Condition: good (used), Year of construction: 1998, functionality: fully functional, filling weight (min.): 250 g, filling weight (max.): 1,000 g, Equipment: documentation/manual, MIROMATIC MDA 2-1-C2 Format-independent bucket filling system General information: - Manufacturer: Miromatic - Type: MDA 2-1-C2 - Year of manufacture: 1998 - Condition: Used, good condition - Application area: Filling of thin to pasty food products into buckets and containers - Equipped with a Miromatic fruit mixing system (including pumps, valves, flow meters, etc.) Performance and container sizes - Filling range: 250 g - 1,000 g - Output: up to 1,800 kg/h - Dosing accuracy: ± 0.5 % - Format-independent transport system - Fast format change without special tools Equipment and functions: - Automatic bucket feed - Automatic lid feed - Product selection via stored programs - Quantity recording per container and product - Magneto-inductive flow meters with self-correction - Low-foam product filling - Hygienic stainless steel design (V2A) Hygiene equipment - Integrated CIP cleaning system - Automatic cleaning of feed tank and conveyor chain - Steam sterilization of product feed and dosing valves - Laminar flow module with HEPA filtration (cleanroom class 1000) - UVC disinfection of containers - UVC disinfection of lids Application areas The system is particularly suitable for filling: - Yogurt - Sour cream Nledpezav A Hjfx Acmsc - Fresh cheese - Quark - Desserts - Fine food products - Sauces and dressings - Creamy and pasty food products

Year of construction: 2016, condition: used, Trepko 9104-2 FFS Line + Freemantle S09 (2016) Trepko 9104-2 Form–Fill–Seal Cup Packaging Line (2016) with T. Freemantle S09 Wrapper This complete Form–Fill–Seal (FFS) production line from 2016 is engineered for high-capacity manufacturing of thermoformed cup products. The main unit, Trepko 9104-2, forms cups from roll-fed plastic material, fills them with viscous food products, seals with PET/EVOH lids, cuts multipacks, and discharges them for further downstream handling. Included with the line is a T. Freemantle S09 wrap-around packer from 2016 for grouping and wrapping finished multipacks. The line is ideal for yoghurt, dairy desserts, processed cheese, margarine/spreads, pâté, and other pumpable or semi-solid food products. Key Features - Complete FFS system: forming, filling, sealing, cutting, and discharge - Designed for 125 g cups (available formats: 4-pack and 8-pack) - Fully automatic, continuous operation - Hygienic, stainless-steel construction - Suitable for chilled and ambient food products - Includes T. Freemantle S09 wrapper/packer for downstream grouping - Supplied with documentation and manuals TREPKO 9104-2 – Technical Highlights Nljdpfxex Eldxs Acmoc Cup Forming - Thermoforming from PS/EVOH/PE roll material - Max film width: 740 mm - Max roll diameter: 1000 mm - Heavy-duty forming tools for 125 g round cups - Multi-cavity arrangement for high throughput Filling System - Stainless steel volumetric dosing block - Multi-nozzle configuration for accurate filling - Suitable for viscous food products - CIP-compatible design Sealing - Lidding material: PET/EVOH, width 240 mm - Heated sealing station for hermetic seals - Precise lid positioning and temperature control Cutting & Discharge - Automatic multipack cutting - Supports 4-cup and 8-cup retail pack formats - Smooth discharge conveyor for integration with wrapping or case packing T. Freemantle S09 Wrapping Unit (2016) - For grouping and wrapping cup multipacks or blocks - Film-fed automatic folder/wrapper - Adjustable for various package dimensions - Stainless-steel construction, CE marked - Compact, reliable downstream solution Applications - Stirred yoghurt - Sour cream / dairy desserts - Processed cheese spreads - Margarine, butter portions, vegetable fat spreads - Dips, pâté, paste-type products - Any pumpable or semi-viscous food requiring thermoformed cups Technical Information - Trepko Model: 9104-2 - Machine No.: 3859 - Year: 2016 - Voltage: 415 V / 50 Hz - Freemantle S09 Year: 2016 - Voltage: 240 V - Full documentation available. Condition The line is in very good used condition, complete with all major forming, filling, and sealing components, stainless-steel safety enclosures, and electrical cabinets. Well maintained and previously used for yoghurt production in a European dairy facility.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,234 h, functionality: fully functional, machine/vehicle number: 2161, Aerosol cans Micro Leak Detector for inline operation, 20-30 cans per minute. Batch and sample testing. Nsdpjw Dzrcofx Acmjlc

Condition: good (used), Year of construction: 2009, functionality: fully functional, Filling system for sugar packets. Nlodpfxszbh Sps Acmoc

Condition: new, Teikoku Canned Motor Pump BA61 Manufacturer: Teikoku Electric Mfg. Co., Ltd. (Japan) Distributor: AxFlow AB, Stockholm, Sweden Model / Type: BA61-116J4BL-050611V-F Serial Number: FC-1236A-2 Date of Manufacture: July 2010 Performance Data: Head: 50 m Flow Rate: 18 m³/h Frequency: 50 Hz Voltage: 400 V Power: 11 kW Current: 23 A Number of Poles: 2 Nledpfx Aey Nd H Tjcmsc Protection Class: IP65 (IEC 60529) Duty Type: S1 (continuous operation) Ambient Temperature Range: −15 °C to +40 °C NEW / (NOS), unused stock. 4 units available Location: Kusel

Condition: excellent (used), Filling machine, TM Industry Belgium, Model M 25 For filling liquids Nodpfx Aeiu H Uvecmelc Filling range: 0.5 - 30 kg In very good condition, directly from production!!!

Condition: excellent (used), Automatic filling system Logdos Späth GmbH Type K-DOS.F/AL 40/EX Nodpeiyytqofx Acmslc for filling liquids into buckets, jerricans, IBCs and drums ATEX-protected mobile, can be moved on rollers compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and palletizing Very good condition, directly from production!!!

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AP00103831, total height: 660 mm, total width: 560 mm, total length: 480 mm, type of input current: AC, overall weight: 50 kg, power: 0.6 kW (0.82 HP), Specification - PS 125 OneStep Weight: 50 kg Electrical: Switchable 110/220 VAC, 50/60 Hz 5.0/2.0 Amps Width: 56 cm Height: 66 cm Depth: 48 cm Nljdpfxsy U D Twj Acmjc Throat depth: Up to 86 mm Film thickness: 35-100 µm Bag size: W 55-260 mm, L 102-430 mm Material stock: - 2 pallets of film (250x400x50my) - a few boxes of film (125x175x50my) - a few boxes of thermal transfer film

Condition: good (used), Cartridge holder with shut-off valve Application: Butyl extruder Nsdpey Tk Tnofx Acmjlc Width: 450 mm Diameter: 80 mm Weight: 2.6 kg Condition: good, second-hand

Condition: good (used), Year of construction: 1984, functionality: fully functional, total width: 1,335 mm, total length: 3,440 mm, overall weight: 3,200 kg, Equipment: documentation/manual, Ampack Ammann AA4 – 4-lane cup filling and sealing machine with integrated carton packer AGP4 Manufacturer: Ampack Ammann Type: AA4 – 4-Lane Inline Cup Filling & Sealing Machine Year of manufacture: 1984 Capacity: up to 12,000 cups/hour Cup size: Ø 95 mm Packaging unit: including integrated carton packer Ampack Ammann AGP4 Nlodpjzaficjfx Acmsc Condition: good condition, fully functional, currently still in production Description For sale is an Ampack Ammann AA4 cup filling and sealing machine with a 4-lane inline design for the hygienic filling and packaging of dairy and fine food products. The machine is in good technical condition, fully operational, and is currently still used in ongoing production. The system features UV light cup sterilization to increase product safety and enables product shelf lives of up to 54 days (depending on the product, formulation, and packaging material). The scope of supply also includes an integrated carton packer Ampack Ammann AGP4, which ensures automatic further processing of the filled cups. Products previously processed: * Yogurt * Kefir * Yogurt-cereal mixtures * Other viscous dairy products are also possible

Condition: used, Year of construction: 2014, machine/vehicle number: M298, Used filling monoblock AMS FERRARI 12/12/1 year 2014 Nlsdow Ag Ndjpfx Acmjc The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: used, Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Nledpfx Asgukvvocmsc Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Lenght: 130 Height: 210 Delivery time: 20 working days after advanced payment

Condition: new, Moulding machine Ital Form Completely made of stainless steel Nedpfx Aeuuiatscmelc 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Condition: new, Moulding machine Ital Form Nlodpfx Asuuif Aocmec 4 cylinders Rollers 500 mm long Dimensions: 850x1200x1150mm Electric power: 0.75kW Weight: 170 kg

Year of construction: 2011, condition: as good as new (ex-display), machine/vehicle number: 10.000 Ltr, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications: Nominal capacity: 10 cbm Quantity: 1 Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted. Color: Paint RAL... as per your request. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate. Shape: Cylindrical, lying horizontally on 2 welded saddle supports (ground clearance approx. 100 mm). Monitoring space of the double wall with leak detection fluid. Container dimensions: Length: approx. 5,350 mm plus 600 mm for diesel pump Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket. - Filling pipe 2“ with TW valve (filling cap) (from 20 m³ = 3“) - Suction pipe 1¼“ - Dipstick and dipstick closure – tank level indicator - Vent pipe with cap 1 ½“ - Limit value sensor with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately. Tank approved for installation outside of earthquake/flood zones. Diesel fuel dispenser with data recording Type: HDM80eco LTE Flow rate: 75 l/min Cloud-based basic module free of charge You can see who, when, where, and how much fuel was dispensed. Fueling is done via tank key or PIN input. Dispensing area/fueling station Type: KAP system, galvanized Area with ramps (mm): approx. 2,650 x 5,300 Area without ramps (mm): approx. 2,500 x 5,000 Pan height (mm): approx. 60 - Nationwide general building approval - Approved for installation outdoors and in buildings (For outdoor installation with folding cover and passing pipes) - 2 collection basins, each with a volume of 150 liters. ===== Top offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer affordable delivery upon request. You can inspect our systems at any time. Further tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please call us, one of our experienced employees will be happy to advise you. Price/Shipping The price for the fuel station applies ex works Warstein, unloaded. Delivery can be offered at a low cost for an additional charge. Nljdpocl Sb Rsfx Acmjc Delivery time: upon agreement. You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: good (used), Year of construction: 1994, Connection: 1.1 kW. Pressure: 6 bar. Nsdpfx Acjvk Elnjmolc Length: approx. 1400 mm. Width: approx. 1300 mm. Height: approx. 3450 mm.

Year of construction: 2013, condition: good (used), functionality: fully functional, Capacity: 9,000 bottles/hour Nljdey Uy Iqopfx Acmec Products: Milk, yogurt, probiotic and protein drinks Bottle volume: 150 ml The system consists of the following components: AUGENSTEIN washing machine (year of manufacture 2006) DECKERT bottle filling machine (year of manufacture 2003) ALCOA/Augenstein cup feeding and application system (years of manufacture 2003/2008) PACE bottle feeding and positioning unit (year of manufacture 2004) SLEEVER INTERNATIONAL pouch machine with steam tunnel (year of manufacture 2013) METTLER TOLEDO 3-scale and metal detector (year of manufacture 2008) Condition: used, fully functional

Condition: good (used), Year of construction: 2002, functionality: fully functional, Manufacturer: PFM Model: Zenith Inox Year: 2002 Output: approx. 50 pcs/min Electrical power: 4.5 kW Nedpfoxapzzjx Acmelc Weight: 680 kg Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional

Condition: used, Year of construction: 2011, machine/vehicle number: M337, Used RAVECCO MORAVEC filling triblock 12-12-1C for waterTechnical Specifications & Performance DataThis second hand Filling Monoblock by Raveco Moravec combines rinsing, filling, and capping in a compact rotary platform designed for efficient beverage production and industrial packaging. Engineered for glass bottles, it is a reliable choice for a used bottling line seeking flexible closure options and straightforward integration.Manufacturer: Raveco MoravecModel: 12-12-1C MonoblockSpeed: 2.500 BPH ( Bottle per hour)Configuration: 12 rinsing grippers, 12 filling valves, 1 capping headContainer types: Glass bottlesBottle formats: Compatible with 0.33L, 0.5L, 0.75L, 1.0L bottle formatsNeck finish: Long neckClosures: crown capsConstruction year range: 2009–2011Machine type: Rinser–Filler–Capper monoblockAdvanced Automation & Control SystemsThe machine utilizes a Moravec control platform with manual operation, providing straightforward and dependable control for operators. Core functions for rinsing, filling, and capping are synchronized within the monoblock to maintain consistent bottle handling and process timing. Operator access is designed for quick intervention and basic parameter adjustments, supporting reliable changeovers between closure types.Moravec control system with manual operationSynchronized monoblock timing for rinse–fill–cap sequenceOperator-friendly controls for format adjustmentsStandard emergency stop and interlocked guarding typical of industrial packaging machineryProduction Line Integration CapabilitiesThis Filling Monoblock is configured for a straight-line conveyor layout, enabling smooth integration within a used bottling line or operation as a standalone module. It accepts a range of glass bottle formats and supports quick format and closure changeovers, making it suitable for flexible beverage production environments.Inline integration on straight conveyor layoutsStandalone or in-line operation within broader bottling equipmentFormat flexibility from 0.33L to 1.0L glass bottlesChangeover capability between ROPP and crown closuresMachine Condition & Maintenance HistoryThe equipment is currently in occasional operation and has been in service approximately 25 hours per week during recent use, with remaining time on standby. It has been serviced regularly over the past year of ownership. Testing is available, including both dry run and production tests, to verify operational performance before integration into a second hand production line.Operational status: Occasional operationTesting availability: Dry run and production test possibleService status: Regularly serviced during recent useDocumentation: Technical manuals and schematics not on handSpare parts: Not includedOperational Performance & VersatilityDesigned for glass bottles wi... Nedpfxjy Uvhme Acmelc

Condition: ready for operation (used), Year of construction: 2000, Continuously adjustable dosing volume: 60-1050ml, length: 1750mm, width: 650mm, height: 1700mm. Equipment: mounted on a stainless steel frame, mobile with four swivel castors, manual feeding and removal of bottles, self-priming, with a dipping device for the filling tube, automatic circulation cleaning, homogenizing and refining of curd possible, usable products: liquid, pasty, cold and hot milk, yogurt, curd, cream cheese, fondue, honey, salad dressings, mayonnaise, jam, cake batter etc. An on-site inspection is possible, not under power. Nsdpfx Acey Uyd Ejmslc

Condition: used, Year of construction: 2003, machine/vehicle number: LC632, Used KRONES spirits filling line, roud glass 36.000 BPH - year 2003Technical Specifications & Performance DataThis complete round glass bottling line delivers high-speed performance for industrial packaging and beverage production. Built around Krones engineering, the line is configured for glass bottles in 0.7L, 0.75L, and 1.0L formats. With an output of 500–600 BPM (up to 36,000 bottles per hour), it is a robust second hand solution for producers seeking reliable throughput and consistent product quality.Production speed: 500–600 BPM (up to 36,000 bph)Filling type: vacuum filingBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainers: Designed for Glass bottle handlingCore components (models): Krones Variojet (72-head rinser), Krones Isofill (108-head isobaric filler), Krones Topmatic/Zalkin (18-head capper), Cold glue front & back labeling, Logics & Control Logilook label inspection (2015), Krones Kettner Wrapapac W60 (wraparound case packer), Krones/Kettner Robogrip robot, Krones Multidivider laner, Amberflex spiral case elevator, Linx 7900 bottle coder (2017), Orwak 9020 waste compactor (2006)Case formats: Wraparound boxes, 6 & 12 pack configurationsMain build year: 2003 (with upgrades in 2006, 2015, and 2017)Electrical supply: 415 V, 50 Hz (most main equipment); auxiliary devices at 240 V, 50 HzAdvanced Automation & Control SystemsThe line integrates automated material handling and inspection to ensure stable operation and quality assurance. The Krones Multidivider laner and Robogrip robotic handling enhance flow balance and downstream palletizing, while the Logilook system provides label presence and position verification. Changeovers between compatible glass formats are supported by standardized Krones change parts and adjustable guide-rails for efficient setup.Automated depalletizing, lane division, and robotic case handlingInline label inspection for consistent presentationOperator HMI terminals at key stations (typical Krones layout)Rapid format adjustments for 0.7L, 0.75L, and 1.0LStable 50 Hz operation; widely supported industrial componentsProduction Line Integration CapabilitiesThis used bottling line is designed for seamless in-line operation from bottle depalletizing to case packing. It accommodates round glass bottles and integrates labeling, coding, and inspection for end-to-end quality control. The wraparound case packer enables efficient secondary packaging for 6- and 12-pack configurations, ensuring compatibility with standard palletizing patterns.End-to-end flow: depalletizer → rinser → isobaric filler → capper → cold glue labeller → label check → coder → laner → case packer → spiral case elevator → palletizing robotSuitable for beverage production requiring glass bottle processingModular stations allow standalone testing or full inline operationMachine Condition & Maintenance HistoryManufactured in 2003 with subsequent upgrades in 2006 (waste handling), 2015 (label inspecti... Nodpfx Ajy Ud Alscmelc

Year of construction: 2024, condition: new, functionality: fully functional, Pneumatically operated can opener including rack for different sizes Technical description: The can is handled by placing it under the punching head. By manually actuating the safety two-hand control, the lid is punched out with the knife in the punching head. After releasing the two-hand control, the punching head moves upwards to the home position. Nsdjttvxwjpfx Acmslc

Condition: used, Year of construction: 2020, operating hours: 14,500 h, machine/vehicle number: M335, Used SIG filling combibloc 26500 BPH - Year 2020Technical Specifications & Performance DataThis aseptic carton filling monoblock is engineered for high-efficiency beverage production and industrial packaging applications. Manufactured by SIG Combibloc, it combines robust aseptic technology with modern upgrades for increased throughput. This second hand, high-performance unit integrates seamlessly into a used bottling line or packaging line, supporting fast changeovers and consistent output quality.LineVolumeSpeedEquipment DescriptionYear of ManufactureSIG-A HMR ~ 1450065ML, Nodpfsy Uc Tvox Acmelc 125ML, 200ML26500H2O2 SYSTEM-LK-57VC-02-20222022COMBIBLOC FILLER-871251055-20202020FILLER SPEED UP CONVERSION KIT-SIG2024STEPER MOTOR FILLER SPEED UP CONVERSION KIT2024Manufacturer: SIG CombiblocMachine type: Aseptic carton filling monoblockMain manufacturing year: 2020Production speed: up to 26,500 units/hourFormats supported: Compatible with 0.065L, 0.125L, 0.2L carton formatsContainer types: Designed for Carton handlingAseptic technology: H2O2 sterilization system (commissioned 2022)Upgrades: Filler speed-up conversion kit and stepper motor conversion kit (installed 2024)Operating hours: approximately 14,500Operation: Linear monoblock configurationAdvanced Automation & Control SystemsThe monoblock incorporates advanced automation features to stabilize performance at higher speeds and minimize operator intervention. The 2024 speed-up conversion kit and stepper motor upgrade enhance dosing accuracy and acceleration profiles, supporting smoother startups and reduced cycle times. Integrated controls enable recipe-based format changes, fault diagnostics, and production data visibility. Safety interlocks and clear HMI prompts contribute to predictable uptime and simplified operation.Production Line Integration CapabilitiesDesigned for flexible integration within a complete packaging line, this aseptic filler can operate inline with carton forming, top application, conveyors, and end-of-line equipment. It is well-suited for modernization projects or expansions of a used bottling line or second hand packaging line. Format changeovers cover common single-...

Condition: ready for operation (used), Primutini bombing machine Nsdjwt Nxpspfx Acmjlc