Used Barcode Scanner for sale (517)

Condition: used, Year of construction: 2021, Logopak 850 pallet labeller: This is an intelligent labelling system for barcode technology and product identification in industrial applications. Additional title: pallet labelling Capacity ca.: 100 Pal/h Current: 6 A Voltage: 100 - 240 VAC Frequency: 50 - 60 Hz Operation / Control: Touchscreen in the housing Gsdpfx Acszgc Hkogjui Material: Painted steel housing Position: Free standing Base construction: Stainless steel housing with windows, on square tube feet, with dome feet Features: Touchscreen in housing

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Gedpfxjzhub Aj Acgjui Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 3,800 mm, plate width: 2,200 mm, table length: 3,800 mm, table width: 2,200 mm, The pick-up deadlines stipulated in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! Guedpfx Aszf H Nmecgji TECHNICAL DETAILS Plate width max.: 2,200 mm Plate length max.: 3,800 mm Cutting depth main saw: 123 mm Number of grippers: 7 Feed rate max.: 140 m/min MACHINE DETAILS Motor power main saw: 18.5 kW Motor power scoring unit: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding fence The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: used, functionality: fully functional, machine/vehicle number: 40711, Single jersey circular knitting machine, Mayer & Cie. model MV 1, machine number 40711. Made in Germany. NAMEPLATE DATA · Nominal diameter: 914 mm / 36 inch · Gauge: 28 E · Pitch: 0.91 mm · Number of needles: 3168 · Manufacturer: Mayer & Cie., Emil-Mayer-Straße 10, D-72461 Albstadt, Germany · No CE marking 36" DIAMETER WITH GAUGE 28. With 3168 needles, this machine has the highest needle count in the lot. A 36-inch diameter combined with a fine 28 E gauge is designed for wide-width production: mattress ticking, home textiles, shirting, and lightweight outerwear. EQUIPMENT FITTED · Phototex FM8 electronic fault scanner (ITE), CE marked · Senso+ lubricator by EQ Systeme, 5-liter tank · Air filter-regulator · Control panel with start and stop push-button station · Hengstler counters · Top creel CONDITION Machine assembled, currently protected with film for storage. Viewing, inspection, and a running test on-site can be arranged. Gsdpfxozvn S Rj Acgsui DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: new, Year of construction: 2025, Model 2025 for Industry 4.0! Laser marking system for: =ᐳ Marking =ᐳ Annealing of metals =ᐳ Marking of various materials =ᐳ Deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width). Simple operation and handling! Our exclusive XL laser marking system stands out due to: • Professional fiber laser source JPT MOPAfix 20 or 30W power • 1064nm, 20-400 kHz (for perfect annealing engravings) • Scanning unit "New Generation ECO" • 19" PC control, no external card! • Very large viewing window with certified laser safety glass • Scanning area approx. 150 x 150 mm • Electric height adjustment • Full enclosure with 4 rollers • "Weightless" lifting door for safe marking. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix with 2 parameters • TCP IP connectivity for external components • Industry 4.0: The status can be processed at any time via the TCP/IP protocol. • Inputs and outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis machining • Performance increase of up to 50% thanks to 64-bit architecture • Improved stability through integrated control card • Optionally up to 4 axis controls (integrated) • Optional deep engraving with Z-axis • More efficient algorithms for fast hatching. • Completely newly designed galvanometer generation • 2x laser pointer for checking the focus position • LED lighting of the marking area • Connection option for external extraction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating manual and operating software in German • Protective enclosure acc. to laser class 1 • Includes 4 hours of training in our training center (max. 2 people) Do you need something customized? We can do that. Choose from our wide range of accessories: =ᐳ Camera systems for object recognition =ᐳ Fiber laser source in almost all variations =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for loading =ᐳ Conveyor belts for input and output Gujdpfxed S H Nvo Acgoi =ᐳ 3D marking and engraving function. =ᐳ Automatic focus adjustment =ᐳ Rotary unit =ᐳ Motorized slides =ᐳ Interlock system for marking WITHOUT a protective housing, but only with PPE (personal protective equipment) for bulky parts. Our engraving lasers naturally allow for individual requests in terms of design and size! =ᐳ Made in Schweinfurt! Images may include options! Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking machine, laser engraving machine, laser marking system, marking laser. Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking machine, laser engraving machine, laser marking system, marking laser, marking hero.

Year of construction: 2011, condition: like new (used), I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank Material pressure zone pneumatic adjustable End cutting saws pneumatic adjustable Rough milling manual adjustable Tilting radius milling top + bottom pneumatic adjustable Gedpfx Acenwkbcegoui Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Hot-air blower Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 12m/min. PUR glue possible. Second glue tank absolutely new included. Only 6.153 meters edgenbanded ! Machine practically new. Very good condition, fully working!

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Mitutoyo Surface Measure 606 Laser Scanner 60mm measuring range, 12µm measurement uncertainty Incl. electronic unit and cable set for Gjdem Exc Djpfx Acgeui Mitutoyo UC200 Incl. Renishaw Interface IS1-2 Incl. MSurf software (Nikon) All approx. year of manufacture 2008 On request with optional ACR3 rack from Renishaw (€ 3.000,--)

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application Godounaqvopfx Acgeui - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, number of ink cartridges: 4, year of last overhaul: 2025, type of input current: AC, overall weight: 350 kg, Equipment: auto duplex, double-sided, Dear business customers, we hereby offer our Xerox devices in very good condition: Brand: Xerox Product type: All-In-One printer Product line: Xerox Colour Model: Color C60 Technology: Laser Maximum resolution: 2400 x 2400 x 1 dpi Special features: Duplex, Fax, Copier, Scanner Output type: Colour Input type: Colour Konnektivität: 10/100/1000BASE-TX B/W print speed: 65/75 ppm Gsdov Dtinepfx Acgsui Manufacturer code: 3916823303 Supported print formats: A4 (210 x 297 mm), SRA3, A3 (297 x 420 mm) Paper feed: 3260 sheets as standard via four internal trays and additional feeder Manufacturer's warranty: None Country and region of manufacture: Unknown Dimensions: Height: 1391.5 mm - Width: 1574 mm - Depth: 787 mm Compatible operating system: All common Windows operating systems, various MAC operating systems (see data sheet) Scan functions: Scan-to-E-Mail, Scan-to-Folder, Scan-to-PC, Scan-to-Mailbox (private and public), Scan to USB, FTP, SMB, Desk, Searchable PDF, PDF/A, XPS, Thumbnail preview Scan file formats: PDF, XPS® , PCL® -6 emulation, HP-GL2 (direct transfer), TIFF, JPEG, Adobe

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 03-2018, For sale: perfectly preserved and fully operational semi-automatic flexo printing machine for corrugated board, manufactured by the renowned EMproject 89. Built in 2018, this machine is designed for reliable and precise 2-color printing on cardboard packaging. The machine is currently connected to power, fully functional, and ready for work. It is ideal for printing logos, barcodes, and graphics on shipping, industrial, or transport boxes in a single pass. Key Technical Specifications: Godpezilvgofx Acgsui Manufacturer: EMproject 89 (Serbia) Model: FLEXO PRINTER MS-1700/1400 Year of Manufacture: 03 / 2018 Number of Colors: 2 (Two-color printing) Maximum Cardboard Format: 1700 mm x 1400 mm Voltage: 220 V Condition: Fully operational, well-maintained, testing possible before purchase. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Price is negotiable for serious buyers upon inspection. We also have other cardboard manufacturing equipment available printing machine (Flexo Printer EMproject 89), automatic paper slitting and rewinding machine YYS-I ( 2023), automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME ( 2024) and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are also available for sale.

Condition: excellent (used), Year of construction: 2025, operating hours: 60 h, functionality: fully functional, warranty duration: 12 months, Equipment: documentation/manual, The wooden frame painting robot system consists of: KUKA IONTEC KR20R3100 robot with KRC4 controller and 7th axis integration 7th axis linear track with servo drive and robot lifting system Control cabinet with a 15” touchscreen interface Beckhoff Safety system with the option to connect safety light barriers or safety mats Spray control system with 4 proportional valves and solenoid valves Automatic nozzle cleaning unit 8 digital inputs / 8 digital outputs for communication with the conveyor and rotation systems 3. Technical Specifications Parameter Value Working range L = 4,000 mm × H = 2,500 mm 7th axis track length 6,000 mm Maximum robot axis speed 700 mm/s Adjustable painting speed 50–400 mm/s Compressed air requirement Gedszl Sbzjpfx Acgjui 8 bar (1,250 l/min) Power supply ~3 × 400 V, 50 Hz Scanner resolution 7 mm × 7 mm Installed power 15 kW Maximum tool weight 20 kg 4. Frame Recognition and Scanning System The scanning system consists of: Industrial scanner Encoder Dedicated software with an automatic program generator The system detects: Object shape Position relative to the traverse Contours Based on scanning data and operator-defined parameters, the software automatically generates the optimal painting program for the robot. 5. Flexible Recipe System Surface coating quality depends on adjustable, operator-defined parameters. The system allows the creation of unlimited product recipes depending on: Product type Product size Frame configuration (frame, sash, panel) Profile type Large and small format frames Separate parameter sets ensure optimal paint coverage for each product type. Adjustable Parameters: Robot painting speed Spray gun angle relative to the product Spray gun distance from the product Spray start and stop delay Paint reduction at intersections and corners Product thickness Spray penetration depth for internal surfaces Air flow regulation Paint pressure control 6. Painting Process Sequence 1. External surface coating 2. Internal surface coating 3. Final facade finishing layer This sequence ensures complete and uniform coverage of all surfaces. 7. Supported Products The software can automatically generate painting programs for: Standard rectangular European windows (without additional trims), where the internal opening painting surface ≥ 350 mm Flat-surface Closed door frames mounted on a traverse (no open ends)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs Guodorcm Rujpfx Acgei - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 400 S Aluminyum Pvc Çift Kafa Kesim Makinası, • Complies with CE standards. • Cutting accuracy +/- 0.1 millimeter • Automatic adjustment to two angles: 90° and 45°. • Automatic slicing at two angles: 90° and 45°. • Touchscreen color panel display • Remote connection and technical support capability • 2 x 500 mm saw blades • With Ø500 mm saw blades, max 16.5 cm cutting depth and ability to cut 2 x 80 mm profiles • Adjustable saw speed • 6-meter cutting capacity • Block cutting feature • Unlimited language support • Unlimited measurement memory capacity • Conveyor right/left profile support unit • Profile support unit between cutting heads • Spray saw cooling system • 2 vertical clamps • 4 horizontal clamps • Air gun OPTIONS • Barcode printer • Cutting list transfer via USB memory stick • Hydro-pneumatic, hydro-check controlled saw movement Gsdpfx Acjramvaogoui

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: W25-M5-18-17210, number of axes: 7, The measuring arm was last calibrated in October 2024. The laser scanner was calibrated in April 2024. TECHNICAL DETAILS Measuring system: FARO Quantum M ScanArm Measuring range: 2.5 m Axes: 7 Measuring method: Tactile coordinate measurement and 3D scanning Laser scanner head: FARO LLP HD, Revision 3.2 Guodpfx Acszx N Rgjgei MACHINE DETAILS Application areas: Dimensional inspection, CAD component comparison, first article inspection (FAI), production control, tool and fixture inspection, and reverse engineering Measuring stand height: 750 - 1,000 mm Measuring stand weight: 17.25 kg Reach: 350 mm EQUIPMENT FARO LLP HD laser scanner head, Revision 3.2 Tactile probes MetrologyWorks Kodiak HDP-KCF measuring stand Measuring stand construction: Carbon fiber/aluminum Measuring stand mounting ring: 3"-8 Original FARO transport case Batteries Power supply Cables Mounting accessories Calibration documentation Technical documentation Manual Note: The laptop and PolyWorks software are not included in the offer.

Condition: used, including scanner, power supply, and B&R industrial PC; a Jensen Metric system was installed at the time of decommissioning. Godpfxozazilo Acgsui

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Guedpsyz An Tjfx Acgsi

Condition: used, Yoko Shark FS-500 Inspection machine The FS SHARK 500 Inspection Machine will precisely find out the defects of printing on cartons and reject the bad ones from the good ones automatically at high speed. Max. Transportation speed: 250m/min Max. Inspection speed: About 60000pcs/hour for pharmacy blanks 150mm length About 80000pcs/hour for cigarette blanks 100mm length Max. Sheet size(W*L): 480 x 420mm Min. Sheet size(W*L): 90 x 90mm Thickness: 90-400gsm Total dimension(L*W*H): 6680*2820*1985mm Total weight: 3.5T Front Imaging Resolution(Color camera): 0.1 x 0.12mm Front Imaging Resolution(Angle camera): 0.05 x 0.12mm Front Imaging Resolution(Surface camera): 0.05 x 0.12mm Reverse Imaging Resolution(Reverse camera): 0.11 x 0.24mm DEFECT DETECTION: Minimum defect size (as a point): 0.10mm' (Contrast > 20DN) Minimum defect size (as a line): 0.1mm X 5mm (Contrast > 20DN) Minimum detection area of hot stamping: ≥ 0.10 sqmm Print Mis-Registration detection: 土0.10m m Die-cutting deviation detection: ≤ 0.10mm (Contrast ≥ 20DN) Local color difference detection: D≥ 3 Barcode detection: Reading frame, error code, repeated code Characters detection: Wrong word, leak word, corresponding to bar code Appearance detection: Spot, broken line, white & black bracing wire, ink leak, warp, skew Gjdpfx Ace Akcnwegjui Two dimensional code detection: Two dimensional coderecognition

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 Gjdpfxozmh Aws Acgoui - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, paper weight (min.): 80 g/m², paper weight (max.): 300 g/m², paper width (min.): 100 mm, paper width (max.): 330 mm, number of feeding trays: 4, Equipment: auto duplex, brochure finisher, Digital CMYK laser printer. Available with a Fieri processor. Output with saddle stitching for booklets. Scanner. It was purchased from the official dealership and has been maintained exclusively by the official service center using genuine parts. It is in working order and available for any inspection. Gusdpfoz Hrhuex Acgei

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) Guedpfjwlc Tdex Acgji - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: good (used), At least 10 Sato SP40 label printers - 203 dpi, thermal printing, USB, fast, compact - used - : Price per unit from location: only €159 (net)! Manufacturer: Sato Type: SP40 Year of manufacture: unknown Print technology: thermal printing (direct) Print resolution: 203 dpi, for razor-sharp and easy-to-read labels Maximum print width: 104 mm, perfect for common label formats Maximum print speed: Up to 152 mm per second for fast print jobs Media: Suitable for labels, tags and paper rolls with a width of 25 to 110 mm User-friendly: Easy operation thanks to a clear LCD display and simple button control Compatibility: Supports common label software and a variety of barcodes such as Code 128, EAN, UPC and many more Connections: USB, serial (RS-232) and optional LAN - flexible in integration into your existing system Compact and robust: The space-saving design ensures a long service life and fits into any work environment The Sato SP40 label printer is the perfect choice for anyone looking for a reliable and easy-to-use printer for labels and search for barcodes. With its compact design, it fits into almost any office or work environment and offers fast and precise printing performance. Ideal for small and medium-sized businesses, it helps you efficiently create labels for products, shipping or warehouse management. Gusdpfx Ajvx E R Hocgsi Condition: good Available: immediately Location: Braunschweig

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Guedpfx Acez Rvi Ejgsi Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Year of construction: 2016, operating hours: 2,860 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: C119370, According to the attached list, the equipment includes: two automatic tool magazines, each with four tool positions – on the left and right sides; a pneumatic reference bumper on the right side; side tunnels; Gusdpj Aayiajfx Acgei CAMplus + Shape software for graphical control of machining, with a 3D display and a function for drawing special shapes; a barcode reader; a controller enabling connection to an external production program, e.g., UNILINK or ORGADATA; a tool set including, among other things, seven HSK 50 F tool holders, a disc holder with an 80 mm disc, ER16 and ER25 collets, and milling cutters for aluminum and steel.

Year of construction: 2020, condition: used, Manufacturer: Rocla Oy (Logisnext Group, Finland) Type: Automated Guided Vehicle (AGV) – counterbalanced model with bale clamp (AWTsc) Industrial Applications: Automated handling of bales, rolls, pallets or cylindrical loads in paper mills, packaging plants, logistics hubs, and automated warehouses. Designed for 24/7 operation in narrow aisle and high-density racking systems. Main Technical Specifications: - Model: AGV AWTsc – 40TF8300E - Year: 2020 - Nominal capacity: - 3200 kg at 760 mm load center - 6400 mm lift height - Battery type: 420 Ah - Unladen weight: 4520 kg - Power supply: 24 V DC - Rated power consumption: 6.8 kW - Drive control: fully automated Guodpfx Acow Ec Easgsi - Turning radius: compact for narrow aisles - Safety equipment: - 360° laser scanners - Obstacle detection sensors - Intelligent automatic braking - Control interface: centralized software-managed fleet system - Autonomy: ~8–16 hours (depending on battery configuration) Machine Usage The Rocla AWTsc is a heavy-duty AGV designed to handle bales or rolls without pallets using its integrated clamp. Its counterbalanced design enables rack access without side supports. It is ideal for environments requiring precise, repetitive handling of cylindrical loads and provides fully automated operation with zero human intervention. Features / Differentiators - Bale clamp attachment for direct roll/bale handling - Full autonomy with intelligent fleet control - High load and lift capacity (up to 3200 kg at 6.4 m) - Advanced safety package included as standard - Suitable for high-density and narrow aisle operations - Integrates easily with warehouse management systems (WMS)

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Godjxgt U Espfx Acgoui Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,