Used Apple Bag Filling for sale (5,742)

Condition: excellent (used), Fully automatic filling machine, De Vree V 156 Filling capacity: 1-20 liters Gbedpeztc Sgefx Ahmer Automatic cap feeder Automatic cap closer In very good condition, directly from production!!!

Year of construction: 2010, condition: used, Precise fill level control for detecting underfilling and overfilling of bottles. P max: 10 bar Current: 8 A Voltage: 230 V Gsdpfjztzcdsx Ahmsbr Frequency: 50 / 60 Hz Length: 1,2 m Width: 0,93 m Height: 2,2 m Weight: 350 kg Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table

Condition: used, Year of construction: 1990, System for cleaning the inside of and filling kegs. Gedpfezty Tbox Ahmjbr Additional title: Keg cleaning and filling system Capacity: 30 Keg/h

Condition: used, Year of construction: 2019, Pasteuriser Profi PA SH: Capacity: 600 l/h 48 kW heated with gas Automatic temperature controller Stainless steel tank, V4A Dimensions: 2,100 x 880 x 1,300 mm Bag-In-Box dosing unit Profi: Capacity: 600 l/h including weighing unit with automatic stop when the specified filling quantity or weight is reached. Bags with up to 10 litres Additional title: bag-in-box filling Capacity: 600 l/h Max. bag volume: 10 l Power: 48 kW Material: vessel from V4A stainless steel Gbedoztyyuepfx Ahmjr Features: gas burner, automatic temperature controller, weighing unit with automatic stop

Condition: used, Year of construction: 1986, Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet Additional title: cleaning and filling Capacity: 50 keg/h Working pressure: 7 bar Voltage: 220/380 V Frequency: 50 Hz Length: 2,0 m Gbodpeztywyefx Ahmer Width: 2,0 m Height: 2,0 m Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type Operation / Control: semiautomatic Material: stainless steel construction as frame, piping and valves as well as main mechanical parts largely made of stainless steel Features: 3 internal cleaning stations, filling station caustic tank and acid tank with pumps

Condition: used, Year of construction: 1984, Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling. Additional title: cleaning and filling Capacity: 60 Keg/h each 50 l Operation / Control: Siemens S7-300 Gbsdpfxjztx Uwe Ahmsr Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, total width: 8,500 mm, total length: 24,000 mm, total height: 3,650 mm, This includes 2 complete packaging lines, currently used for soil products, consisting of: 2 B&C (Bertoncello & Cecchin, Italy) tube bag machines CV 4080 DN, year of manufacture 1997, designed for 10, 15, 20, 45, 50, and 70-liter bags, and in some cases also for carrier bags, with sealing strips. 2 Latz palletizers LHP 1800 (new Siemens S7 control system in 2025). 1 Latz stretch wrapper. All with the various roller conveyors. The systems are still assembled and in operation, until approximately week 38. Gsdpfxezr E T Re Ahmebr Inspection is possible by appointment.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 960540, GIC 3100 bagging machine direct from closed salad factory. In nearly new condition but has had it's electronic components removed (we will replace these with new direct from GIC). Large choice of tooling available. Gsdpfeyx Na Rjx Ahmjbr

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Gbodpfow Hz T Ejx Ahmsr

Condition: excellent (used), Ishida multihued weigher with elevated conveyor, gantry and PFM bagging machine. Removed from a high care cooked meat plant in the last few weeks. Lovely condition. Gjdpfx Aholkc U Eemebr

Condition: good (used), Toyo Jidoki pouch packing machine with vacuum option. Has come from major UK food factory but not used for at least five years. Gbjdpfxeuf A Idj Ahmsr

Condition: used, This line was filling trays of coleslaw and potato salad. 3 lane machine with 2 x 3 head depositors. Gbedpfeqpd Svex Ahmsr

Condition: good (used), Rarely available, Toyo Jidoki pouch machine direct from recently closed manufacturer of sauces, stocks and soups. Was filling these products into stand up retortable pouches. Bought new in 2007. Godpfx Aoqudivjhmobr

Condition: excellent (used), GIC VFB4000 in immaculate condition. Was only used for a few weeks prior to the contract not going ahead. Can be supplied as a line with Multipond weigher (also only used for a few weeks) Gsdpsvtcqgsfx Ahmsbr

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Gbsdpfx Aordzbtohmor

Condition: good (used), Handtmann VF628 vacuum filler with PVLS143 high speed linker cutter from 2021 and GS300 auto tray loading system consisting of GM310 and ZB311. Rarely available. We can offer an additional similar setup with VF622 instead of VF628. Gbedpovvxumefx Ahmer

Condition: used, Gainsborough bagger and All-Fill powder depositor. Gbsdjvvpphspfx Ahmsr

Year of construction: 2014, condition: excellent (used), Machine to seal preformed doy pouch bags, was packing kiwi fruits for major UK supermarkets. Only used for a couple of seasons and in storage ever since. Gjdpfxeifpx Te Ahmobr Video available showing this machine in production.

Condition: used, Turbo Systems D150P Filling Machine This mobile filling machine has been specifically designed for the food processing industry. It enables fast, accurate, and reliable filling of consistent portions of the same size. It is ideal for filling purees, creams, sauces, dairy products, yogurt, and other semi-liquid products into trays, cans, jars, or bottles. The filling machine can be used either as an in-line unit or as a stand-alone machine. It can be quickly and easily disassembled, resulting in a short cleaning time. Both the suction and filling times are continuously adjustable. The portioning machine is manufactured entirely from stainless steel. Technical Specifications: - Production capacity: Up to 60 cycles/min (depending on settings) - Filling range: Approx. 30 mL – 180 mL - Mounted on a mobile, height-adjustable stainless steel frame - Voltage: 230 V (1+N, 50 Hz) - Power: 0.25 kW - Weight: 115 kg - Year of manufacture: 2008 Gbsdpfx Aezn I E Ijhmer - Compressed air requirement: 3–6 bar - Machine dimensions (W × D × H): 1,160 × 640 × 1,870 mm

Condition: good (used), 1 x Weighing and Bagging System Comprising of: - VFFS Bagger, 10 head multihead weigher, bucket elevator, outfeed conveyor, ICE printer, gantry rails on 3 sides. Cyclone 200B spec; Max speed 80 bags per min Bag width 60-200mm Beg length 50-280mm Power supply 3 phase .375kw Gjdozgc H Dopfx Ahmebr Comes with Ice printer *Please note that this machine does not come with steps - only the gantry rails on 3 sides* *UKFM can quote for dismantle of the system and delivery to mainland UK*

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. Gbsdpfx Aoy Urtfehmor The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2007, Overview This complete PET bottling line was built by leading European manufacturers including Sidel, Sacmi and Sarcmi. It is designed for still and sparkling water and is also suitable for soft drinks. With a nominal output of 19,000 bottles per hour for 0.5 L and 16,000 bottles per hour for 1.5 L, it covers the full process from preform blow moulding through filling, labelling, shrink wrapping and palletizing. The core of the line is a Sidel SBO Universal 14 blow moulder (2007) feeding a Sarcmi Azzurra 70-14 isobaric filler and a Sacmi Opera 200 RF rollfed labeller. Technical data - Line type: Complete PET bottling line - Different manufacturers: Sidel, Sarcmi, Sacmi, Zalkin, Zambelli, Comag, Acmi, Robopac - Years of manufacture: 1986 - 2019 - Nominal output: 19,000 bph (0.5 L); 16,000 bph (1.5 L) - Product: still and sparkling water, also suitable for soft drinks - Container: PET bottles 0.5 L and 1.5 L - Cap: Alaska PCO 1881 - Label: OPP rollfed - Packaging: shrink film - 0.5 L 3x2 and 4x3, 1.5 L 3x2 - Palletizing: Euro pallet 800 x 1200 and 800 x 600 Scope of Delivery - Blow Moulder | Sidel | SBO Universal 14 | 14 cavities; incl. Lanfranchi preform tilter, hopper and air recovery system | 2007 - Air Conveyors | NTS | Double chamber, approx. 60 m, 2 air fans - Filler | Sarcmi | Azzurra 70-14 | 70 isobaric filling valves, pitch 110 | 1988 - Capper | Zalkin | 14 capping heads | 1988 - Saturator | Rivi Eng | Carborivi | 30,000 L/h | 1986 - Labeller | Sacmi | Opera 200 RF | OPP rollfed, 18 plates, non-stop automatic reel change | 2011 - Cap Ink Marker | Linx | 8900 | marking on bottle cap | 2019 - Shrink Wrapper | Zambelli | LFT70 | single track with 1-to-4 track channelizer | 2004 - Handle Applicator | Comag | H 65/1 | cardboard handle, single track | 1999 Godezlqzmopfx Ahmobr - Palletizer | Acmi | Rasar P130 | double-head, incl. pad and pallet magazines | 1996 - Pallet Wrapper | Robopac | Genesis | ring wrapping, pallet presser, waterproof covering | 2000 - Conveyors | Procomac / Comag | bottle and pack conveyors, SEW / Selpee motors, Procomac cabinet with Pro-face touch panel Condition Used line, well maintained with extensive annual overhauls by the manufacturers. Currently still installed and under power. The line can be viewed on request. Availability Available from 12 October 2026. Location: Italy.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12349, Sack tip station / Bag dump station with dust collector powered by an integral fan with reverse jet filter cleaning of filtration cartridges. Gjdpfx Aozf Nhfohmsbr

Condition: new, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Gsdpfxszg U Ele Ahmebr Includes 1 nozzle per exit (round, square, triangular or rectangular) with a maximum outer diameter of 40 mm Product temperature up to ± 80 °C With universal connection With pneumatique knife 3 exits belt width 25 cm With support frame in height adjustable New

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen Gbjdjwymlyopfx Ahmjr - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.