OFF-ROAD PICK UP

Mitsubishi L200

Condition: new, Mitsubishi HA200NC-S servo motor SN 73052 + encoder OSA104 SN J4AVP3X337L, unused with signs of storage, 100% functional, scope of delivery as per photos Rsdjrb S Uvjpfx Aa Usp

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), gearing type: hydrostat, color: yellow, overall weight: 2,000 kg, empty load weight: 2,200 kg, operation weight: 2,200 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: 2000, Equipment: additional headlights, cabin, GT2000 The GT2000 crawler excavator is a robust and versatile machine weighing 2,200 kg, ideally suited for earthworks, construction, and installation projects. Thanks to its stable construction and precise hydraulic system, it delivers excellent performance on large construction sites as well as in confined spaces. Engine and Drive The machine is powered by a reliable Yanmar 3TNV80F engine delivering 15.2 kW, ensuring fuel-efficient operation, long service life, and consistent performance. The excavator can also operate on slopes of up to 35°. Hydraulic System The hydraulic system operates at a pressure of 18 MPa, guaranteeing precise and efficient work movements. The bucket digging force is 14 kN and the arm force is 10 kN, enabling fast and effective excavation in various soil conditions. Operating Parameters The GT2000 can dig to a maximum depth of 2,050 mm, a vertical depth of 1,955 mm, and has a dumping height of 2,385 mm. The maximum working range is 3,860 mm and the minimum digging height is 3,365 mm. Rotation and Maneuverability The superstructure rotation speed is 10–12 rpm, ensuring efficient and fast work cycles. Both the minimum turning radius and the rear swing radius are 1,125 mm, facilitating maneuvering in tight spaces. Undercarriage and Stability The crawler undercarriage is 820 mm wide with a minimum ground clearance of 210 mm, providing stability. The ground clearance of the dozer blade is 230 mm and its maximum digging depth is 275 mm, supporting safe operation on uneven terrain. Swing Arm and Cabin The swing arm can rotate 75° to the left and 45° to the right, enhancing operational versatility. The cabin height is 2,270 mm, offering the operator good visibility and comfort during operation. Model: GT2000 Operating weight: 2,200 kg Engine type: Yanmar 3TNV80F Rated power: 15.2 kW Rotation speed: 10–12 rpm Maximum bucket digging force: 14 kN Maximum arm digging force: 10 kN Hydraulic system pressure: 18 MPa Maximum slope angle: 35° Travel drive: Single speed Swing arm: Yes Expandable tracks: Yes Joystick: Yes Standard bucket capacity: 0.06 m³ Rear swing radius: 1,125 mm Minimum digging height: 3,365 mm Maximum dumping height: 2,385 mm Maximum digging depth: 2,050 mm Maximum vertical digging depth: 1,955 mm Maximum digging range: 3,860 mm Minimum turning radius: 1,125 mm Dozer blade ground clearance: 230 mm Rjdpfx Asqv E S Roa Usp Dozer blade maximum digging depth: 275 mm Swing arm angle left: 75° Swing arm angle right: 45° Cabin height: 2,270 mm Wheelbase: 1,230 mm Track width: 820 mm Minimum ground clearance: 210 mm

Condition: used, New: No Redoxb Txtepfx Aa Usp Part suitable for: Mitsubishi Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert.

Year of construction: 2001, condition: used, Sottoriva Rjdpfxjdqapbj Aa Ujp Sprint 30 serial: B31656 2001, 30L spiral mixer, variable speed, stainless bowl and contact parts, safety guard, with timer

Condition: used, machine/vehicle number: 672, mileage: 15,455 km, power: 85 kW (115.57 HP), first registration: 07/1996, fuel type: gasoline, empty load weight: 2,680 kg, overall weight: 3,000 kg, axle configuration: 4x4, color: green, gearing type: automatic, suspension: other, operation weight: 6,000 kg, Equipment: air conditioning, all wheel drive, differential lock, parking heater, trailer coupling, TÜV and AU are made new with truck registration, the Puch in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition, it is the best Puch I have ever seen, almost like new! The Puch Spezial is equipped with: Air conditioning and auxiliary heating, all-wheel drive, rear differential lock, side flap ideal for hunters as a lockable gun cabinet, 2 front seats and 2 rear seats which are not registered because there is no window at the rear, high off-road capability for extremely difficult terrain. - Tire size 205R16, Mercedes automatic transmission 4 gears, total weight is 3000 kg, displacement 2296cm? , 24Volt power supply. There are several Puch Spezial in stock with an original mileage of 15000 to 25000 km. All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp Rodpfeqx Sz Sex Aa Uop

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Rsdpfx Aaexcgy He Uep Battery packs are present and partially installed. The exact remaining work required is not known.

Condition: new, functionality: fully functional, fuel type: diesel, color: green, overall weight: 1,200 kg, operation weight: 1,600 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2025, machine/vehicle number: RH16, Equipment: additional headlights, cabin, hydraulics, The RHINO MOTORS RH16 is the ideal mini excavator for construction and landscaping projects. Rjdpsw El Rrjfx Aa Ujp Operating weight of 1.6 tons Bucket capacity of 0.03 m³ Compact and powerful with enclosed cab Extremely stable and easy to maneuver, even on difficult terrain. Various models available from 1.2t to 4.5t.

Condition: used, mileage: 216,697 km, power: 173 kW (235.21 HP), fuel type: diesel, gearing type: automatic, first registration: 08/2008, Year of construction: 2008, Equipment: ABS, air conditioning, cruise control, navigation system, = Additional options and accessories = - Electric windows - Radio/CD player = Further information = Unladen weight: 1,955 kg Redoydnyfepfx Aa Usp Damage: none Registration number: 47-KDX-8

Condition: new, mileage: 1 km, power: 11.77 kW (16.00 HP), fuel type: diesel, color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, lifting height: 2,610 mm, tire size: rups, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, digging bucket width: 430 mm, Year of construction: 2024, Equipment: additional headlights, adjustable boom, crane, hydraulics, rubber tracks, GG1100 The mini excavator GG 1100 with 3 cylinder Kubota engine is a 1T weighing machine with a swivel frame/knuckle boom and adjustable chassis. Description The latest model GG1100 from Günter Grossmann Each machine from Günter Grossmann is composed of quality parts. The GG1100 model is a well-equipped machine for the most demanding contractors in construction, electricity and hydraulics. Excavators are made based on advanced technologies. We guarantee after-warranty service and we have spare parts in stock in Europe Price list EUR 10,500.00 Includes: GG 1100 + container 380 mm Rsdpep Aruxjfx Aa Uop SPECIFICATIONS Model: GG 1100 Brand: Günter Grossmann Operating weight: 1000kg Boom: articulated arm / swing arm Track: Hydraulically adjustable Bucket capacity: 0.025 cbm Bin width: 380 mm, Engine: Japanese Kubota Cylinders: 3 cylinders Power: 16 hp Main pump: Wanye hydraulic Rotary engine: Dali driving work engine: Dali Movement speed: 1.5 km/h MAIN DIMENSIONS Total dimensions (DxSxW): 2770x936x1490 mm Total track length: 1230 mm Chassis width: 896 mm Track width: 200mm Chassis ground clearance: 132 mm Track height: 320 mm WORK SPACE Max. digging depth: 1650 mm Maximum digging height: 2610 mm Maximum digging radius on the ground: 2890 mm Turning circle: 360° Max height of the dozer blade max.: 345 mm Max. depth dozer blade: 255 mm

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm Working Width, Ideal for Heavy-Duty Mulching! The Brugger FMP 225 is a robust forestry mulcher designed for use in agriculture, forestry, and on fallow land. Featuring a dual belt drive, 36 carbide-tipped blades, and hydraulic equipment, it is perfect for tractors from 110 HP upwards – reliable, high-performance, and ready for tough jobs. Technical Data – Brugger FMP225: Working width: 225 cm Drive: Dual belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 HP Weight: approx. 1,800 kg Hitch: Three-point linkage CAT II / III Redjwhyzwepfx Aa Uep Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with blades) Blades: 36 pieces, carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-position adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for rear flap, 1x for roller) Features: Hydraulic rear flap & roller Included: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = 10,900 EUR Brugger FMP200 200cm – 32 hammers, 1,700kg = 11,900 EUR Brugger FMP225 225cm – 36 hammers, 1,800kg = 12,900 EUR ----- Contact us for a tailor-made offer!