4-wheel forklift

Mitsubishi FG25N

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 867 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,085 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, power: 41 kW (55.74 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, total length: 2,560 mm, drive type: Treibgas, construction width: 1,150 mm, LPG Forklift Load Centre: 500 mm Fork Width: 100 mm Fork Thickness: 40 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: Torque converter / Automatic Condition: Operational and fully functional Technical Condition: Very good Front Tyre Type: Superelastic Front Tyre Size: 7.00-12 Fpodpfx Afexvt H Tonjc Front Tyre Condition: 80 - 100% Rear Tyre Type: Superelastic Rear Tyre Size: 6.00-9 Rear Tyre Condition: 80 - 100% Description: Maintenance and safety inspection (UVV) renewed on delivery. Drive and hydraulic oil replaced. Machine in excellent condition with original 830 operating hours. Photos show the current condition of the unit. Sideshift, Fork positioner. Additional attachments such as fork positioner or similar are optionally available. 3rd valve, 4th valve, front working lights, load guard, full free lift, CE certificate, beacon. Fully enclosed cabin with heating available at extra cost.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Fedpfx Aeur Hfzsfnjpc

Condition: used, Year of construction: 2024, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,355 mm, mast type: triplex, construction height: 2,415 mm, power: 41 kW (55.74 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 3,890 kg, total length: 2,560 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load center of gravity: 500 Fork width: 100 mm Fork thickness: 40 mm Fjdpfxeukxfdj Afnepc ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: 7.00-12 Rear tires Type: Superelastic Rear tires Size: 6.00-9 Description: New machine with a manufacturer's warranty of 24 months in accordance with the manufacturer's warranty conditions. Load protection grid, sideshift, -Other attachments such as fork positioner optionally available- 3rd valve, 4th valve, rear work lights, front work lights, load guard, full free lift, CE certificate, safety light, interior mirror, rotating beacon, LED, -Windshield and roof cover / half or full cab incl. heating optionally available at extra cost-

Condition: used, Year of construction: 2023, operating hours: 2 h, load capacity: 2,500 kg, lifting height: 3,300 mm, free lift: 100 mm, mast type: simplex, construction height: 2,145 mm, power: 41 kW (55.74 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 4,210 kg, total length: 2,560 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load center of gravity: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: torque converter / automatic Technical condition: New Front tires Type: Superelastic Front tires Size: 7.00-12 Rear tires Type: Superelastic Rear tires Size: 6.00-9 Description: New device with a manufacturer's warranty of 24 months, but a maximum of 2,000 operating hours. The first entry applies. Immediately available. Sideshift, Fedpfx Afencrplonepc Fork positioner, rotator or similar optionally available at extra cost. 3rd valve, rear working lights, front working lights, load guard, full free lift, CE certificate,

Condition: good (used), Robot Manfacturer: Staeubli Fpjdpsbrhtdefx Afnoc Type: RX170

Condition: used, Year of construction: 2023, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,355 mm, mast type: triplex, construction height: 2,415 mm, fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 4,000 kg, total length: 2,560 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load center of gravity: 500 Fork width: 100 mm Fork thickness: 40 mm Fpodsui Ui Aepfx Afnoc ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: 7.00-12 Rear tires Type: Superelastic Rear tires Size: 6.00-9 Description: New machine with a manufacturer's warranty of 24 months in accordance with the manufacturer's warranty conditions. Load protection grid, sideshift, -Other attachments such as fork positioner optionally available- 3rd valve, 4th valve, rear work lights, front work lights, roof cover, windshield, load protection grille, full free lift, CE certificate, safety light, interior mirror, rotating beacon, seat, -windshield and roof cover / half or full cab incl. heating optionally available at extra cost-

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Fpjdpfxjwkd Efo Afnjc Hydraulic punching head/multilayer (10/2021)

Condition: used, thread dia. M3 - M12 mm 400 U/min. 25 Nm air pressure 6 - 8 bar Fedpfsfg U Smox Afnopc working area Radius 1000 mm weight of the machine ca. 12 kg Demonstration machine! Pneumatically driven tapping machine for M3 - M12 thread with: - stable and flexible working arm. - 6 pcs. Quick-change chuck with slip clutch. Documentation in English !! optional: - Clamping table with T-slots clamping surface 900 x 600mm

Year of construction: 1997, condition: used, Price: On request - Year: 1997 Fodpfxowh Shvs Afnopc - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 - Z-axis travel [mm]: 800 - Table length [mm]: 5000 - Tool holder: SK40 - Max. spindle speed [rpm]: 18000 - Options: Digital readout - └ Type of digital readout: Heidenhain Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2023, condition: as good as new (ex-display), Technical data:- Load capacity: 15000 kg- Own weight: 960kg- Insertable workpiece diameter: approx. 50 - 3200 mm- Roll diameter: 250mm- Roll width 240mm - Rotation speed approx. 100-2,000 mm/min- Two-pedal foot switch- Potentiometer for stepless speed control Fsded Iuqajpfx Afnjpc