Telehandler / Telescope Forklift

Merlo TF 30.7

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Cab: Fully enclosed cabin, split door 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Gjdpfx Afjyv S Ufskebn Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12V battery with 100 Ah Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Standard equipment: Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 470 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, drive type: Diesel, construction width: 1,810 mm, Telescopic forklift rigid Load center of gravity: 500 Technical condition: very good Front tires type: pneumatic Front tires size: 12-16.5 Front tires condition: 80 - 100% Gjdpfx Afsv Ntfyekobn Rear tires type: pneumatic Rear tires size: 12-16.5 Rear tires condition: 80 - 100% Battery voltage: 12V Image serves as a symbol - Fork carrier - Interior rear view mirror - Radio antenna - Radio preparation - Info additional hydraulic function - JSM tilt function switch-off - Sun visor front roof window - Rear view mirror at the rear of the machine - Roof window wiper - Power cable 95mm - Engine heating - Diesel preheater - EU version - Easy Link STD module 3rd valve, rear work light, front work light, soot filter, full cabin, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,450 kg, total length: 4,510 mm, drive type: Diesel, construction width: 2,000 mm, Rigid telehandler Mast type: Telescopic Gbjdpfjw Ir Ihjx Afksn Technical condition: New Front tires: 400/70-20, field tread pattern Rear tires: 400/70-20, field tread pattern

Condition: new, Year of construction: 2024, Genie S-45 Trax-XC (Xtra Capacity, up to 454kg load capacity), new, used, demonstration machines available Gbjdpfx Aorpzguefksn

Condition: ready for operation (used), The item of my auction is a conveyor belt with a length of 4.5 m and a belt width of 0.6 m. Possibility of transport. Gbjdexgndhopfx Afken

Condition: used, Year of construction: 2016, Lifting capacity 5500kg/8.60mtr. 500/70R24 30% 176l/min Hydraulics Air conditioning tinted / windows / Gbodpfx Afer Ii T Tsksn

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,650 h, load capacity: 4,000 kg, lifting height: 8,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,400 mm, power: 107 kW (145.48 HP), fork length: 1,200 mm, empty load weight: 8,400 kg, total length: 5,370 mm, drive type: Diesel, construction width: 2,390 mm, Rigid telehandler Load center: 500 Mast type: telescopic Gbjdpfoyldtkox Afken Speed class: 40 Technical condition: normal Front tire type: pneumatic Front tire size: 460/70 R 24 Front tire condition: 80–100% Rear tire type: pneumatic Rear tire size: 460/70 R 24 Rear tire condition: 80–100% 3rd valve, air conditioning, Compressed air system

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 130 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Rigid telescopic handler Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: Like new Technical condition: New Front tires type: Pneumatic Front tires size: 12 R Front tires condition: 80 - 100% Gsdpfx Aeww N Npsfkebn Rear tires type: Pneumatic Rear tires size: 12 R Rear tires condition: 80 - 100% Description: The MT 625 H telescopic loader is designed for use on construction sites for new buildings and for renovations of low-rise buildings. The compact machine, measuring 1.80 m in width and less than 2 m in height, easily fits through doors and maneuvers well on congested job sites. Its turning radius of 3.30 m and three available steering modes ensure excellent maneuverability. This telescopic loader is easy to operate, featuring an ergonomic dashboard and JSM joystick for guaranteed ease of use. The MT 625 H offers a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 HP engine allows for a maximum speed of 25 km/h. Maintenance is simplified thanks to the wide opening of the engine hood. The 90-liter gear pump enables simultaneous movements of the boom and telescopic arm, resulting in increased productivity. 3rd hydraulic valve, full cab, CE certificate,

Condition: new, functionality: fully functional, machine/vehicle number: HR14992, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 56 kW (76.14 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,820 mm, Rigid telehandler Chassis number: HR14992 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: telescopic Transmission: hydrostatic Condition: new unit Technical condition: new Front tire type: solid rubber Front tire size: CAMSO SKS532 1216.5 145A2 Front tire condition: new Rear tire type: solid rubber Rear tire size: CAMSO SKS532 1216.5 145A2 Rear tire condition: new Description: Price and further equipment upon request. 12 months factory warranty and max. 2,000 operating hours Rear working light, front working light, road approval (STVZO), fully enclosed cab, CE certificate, interior and exterior mirrors, joystick, windshield wiper, seat, Godswt Hf Hepfx Afksbn radio antenna incl. pre-installation, additional hydraulic function disabling tilt function JSM ASW front and rear in the cab 4x, license plate illumination at the rear, roof wiper, TÜV pre-inspection, 20 km/h.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,000 mm, total width: 1,200 mm, total height: 820 mm, overall weight: 760 kg, power: 2.2 kW (2.99 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: Gjdpfxswynarj Afkebn The ASCO CB 5000 is ideal for construction sites, recycling facilities, screening plants, and composting operations, ensuring efficient, continuous, and safe transport of bulk materials such as soil, gravel, sand, and compost. Users benefit from flexible setup, reliable performance in daily operation, and fast relocation for changing project needs. Key Features: • Adjustable conveyor angle & belt tension • Modular design with length extension option • Fast setup and easy relocation • Integrated hourcounter for maintenance planning • Robust build for continuous industrial use Tech Highlights: Length 5.0 m · Width 1,2 m · Height 0,82 m · Belt width 0.6 m · Capacity 20–110 m³/h · Speed 10–135 cm/s · Drive P 2.2 kW / 400 V · Hopper capacity 0.2–0.5 m³ · Hopper length 0,8 - 1,6 m · Weight 760 kg