Other

Merlo RT 4025 Roto 45.21 MCSS

Condition: used, Year of construction: 2013, operating hours: 5,662 h, Equipment: all wheel drive, Rotary Telehandler by Merlo, RT 4025 / Roto 45.21 MCSS * Model: RT4025 / Roto, all-wheel drive * Year of manufacture: 2013 * Operating hours: 5,662 (according to meter reading) * Lifting height: approx. 21 m * Maximum load capacity: approx. 4,500 kg * Maximum outreach: approx. 18 m Itsdpfx Aajxz I U Aj Ejr * Single cab with one seat * Powered by 6-cylinder Iveco diesel engine * Maximum speed: 20 km/h * 3-section telescopic steel boom * Tyre size: 445/65-R22.5, tread depth 14–18 mm, wheelbase 3,000 mm * Overall dimensions (L x W x H): 6,700 x 2,450 x 3,000 mm * Total weight: 15,500 kg * Hydraulic 4-point stabiliser: 4,950 x 4,950 mm * Pallet forks, tine length 1,200 mm * Radio remote control Further details and additional images available on request. This description does not constitute a binding offer and may contain errors. No guarantee is given for the accuracy of all information provided. Please also visit our homepage.

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Itedpfxswtgcxs Aa Eer Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Condition: used

Condition: used, Year of construction: 2012, operating hours: 4,537 h, Equipment: all wheel drive, Roto telehandler from Merlo, RT 4025 / Roto 45.21 MCSS * Type RT4025 / Roto, all-wheel drive, * Year of manufacture 2012, * Operating hours 4,537 according to the meter, * Lifting height approx. 21 m, * Max. load capacity approx. 4,500 kg, * Max. reach approx. 18 m, * Single cab with 1 seat, * Powered by a 6-cylinder Iveco diesel engine, * Top speed 20 km/h, * 3-telescope steel construction, * Tire size 445/65-R22.5, tread pattern 7-15 mm, wheelbase 3,000 mm, * Overall dimensions (length x width x height): 6,700 x 2,450 x 3,000 mm, * Total weight 15,500 kg, * Hydraulic 4-point linkage Supports 4950 x 4950 mm, * Pallet fork, tine length 1200 mm, * Radio remote control * Rust damage, see pictures Further details and additional pictures available upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. Please also visit our website. Ijdpfxowmiqxe Aa Ejtr

Condition: used, Year of construction: 2012, operating hours: 4,537 h, load capacity: 4,500 kg, lifting height: 21,000 mm, fuel type: diesel, construction height: 3,000 mm, gearing type: automatic, Roto telehandler from Merlo, RT 4025 / Roto 45.21 MCSS * Type RT4025 / Roto, all-wheel drive, * Year of manufacture 2012, * Operating hours 4,537 according to the meter, * Lifting height approx. 21 m, * Max. load capacity approx. 4,500 kg, * Max. reach approx. 18 m, * Single cab with 1 seat, * Powered by a 6-cylinder Iveco diesel engine, * Top speed 20 km/h, * 3-telescope steel construction, * Tire size 445/65-R22.5, tread pattern 7-15 mm, wheelbase 3,000 mm, * Overall dimensions (length x width x height): 6,700 x 2,450 x 3,000 mm, * Total weight 15,500 kg, * Hydraulic 4-point linkage Supports 4950 x 4950 mm, * Pallet fork, tine length 1200 mm, * Radio remote control Itsdpfjwmircox Aa Eer * Rust damage, see pictures Further details and additional pictures available upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. Please also visit our website.

Condition: used, Year of construction: 2001, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 245 mm, working height: 100 mm, type of input current: three-phase, – Year of manufacture: 2001 – Optimization – Cutting to line – The machine has additional tables, allowing a maximum cutting length of up to 6500 mm; currently reduced to 3400 mm – 8 cutting beams Ijdpfxowtzrhe Aa Eotr TECHNICAL SPECIFICATIONS: – Max. cutting length: 6500 mm (currently 3400 mm) – Min. element length: 300 mm – Max. cutting height: 100 mm – Max. cutting width: 245 mm – Blade diameter: 450 mm – Motor power: 9 kW – Max. feed speed: 120 m/min – Acceleration: 10 m/s2 – Optimization according to length and value – Pneumatic material clamping – Five ejection units – Intelligent, controlled waste chute – Vario speed system – Total length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg

Condition: used, Year of construction: 2014, operating hours: 4,600 h, load capacity: 4,500 kg, lifting height: 21,000 mm, fuel type: diesel, construction height: 3,000 mm, gearing type: automatic, Roto telescopic handler from the manufacturer Merlo, RT 4025 / Roto 45.21 MCSS * Type RT4025 / Roto, all-wheel drive, * Year of construction 2014, * Operating hours 4600 according to meter readings, Ijdjw E U Akspfx Aa Eotr * Lifting height approx. 21 m, * max. load capacity approx. 4500 kg, * max. outreach approx. 18 m, * Single cab with 1 seat, * Powered by 6 cylinder Iveco diesel engine * Maximum speed 20 km/h, * 3-telescopic steel construction, * Tire size 480/65-R22.5, tread 15-21 mm, wheelbase 3000 mm, * Overall dimensions in length x width x height 6700 x 2450 x 3000 mm, * Total weight 15500 kg, * Hydraulic 4-point support 4950 x 4950 mm, * Pallet fork, fork length 1200 mm, further data and pictures on request, this description is not a binding offer and may contain errors, no guarantee on all information. Please also visit our homepage

Year of construction: 2005, condition: ready for operation (used), Equipment: T 7300/2, T 7301 (precision adjustment for parallel stop), T 7302, T 7309/2, T 7330 (fixed scale), T 7337 (analog cross stop with seamless alignment), saw blade diameter: 250-500mm, speed: 2800/4000/5500/min, max. cutting height: 80mm, cutting width: 850mm, saw blade swivel range: 0-46°, sliding table length: 3000mm, connected load: 4kW, weight: 1.65t. An on-site inspection is possible. Itodpfxow S Txvj Aa Eor

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 600 mm, working height: 900 mm, saw drive: 7,500 W, Mitre saw adjustable to 45° equipped with 6-meter pusher discharge deck with 6-strand loading chains for faster loading Itedpfx Aajwzg E Ns Eor machine overhauled and fitted with a new digital touchscreen

Condition: excellent (used), STROMAB CT800 Beam Cutting Centre Itjdpfowtw Avsx Aa Eor A cutting centre for beams with large cross-sections, making it the optimal solution for carpentry and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cuts. It guarantees maximum processing speed and finished product quality while reducing labour requirements and maximizing productivity. The CT800 can process beams of any length, with cross-sections ranging from 120×45 mm to 290×280 mm. Beam movement system with driven rubber wheels and pneumatically tilting upper clamps. Specification: Motor power: 18 kW TCT saw blade: 800 mm Number of electronically controlled axes: 4 Saw table rotation: 0° ÷ 340° Table rotation speed from 0° to 340°: 18" Blade angle: 90° ÷ 45° Positioning speed: 0 ÷ 17 m/min Cutting range: At 90° with single stroke: mm 280×290 / 250×390 / 200×450 At 90° with table movement and repeat cutting: mm 280×770 / 250×840 At 45° with single stroke: mm 200×210 At 45° with table movement and repeat cutting: mm 200×760 Maximum longitudinal cutting height: mm 300

Condition: good (used), Year of construction: 1999, machine/vehicle number: 89257, GreCon Dimter Opticut 704 L saw from 1999. Iedotvahljpfx Aa Eetr Machine dismantled from a functioning production line. No output ejectors; the machine requires reintegration or retrofitting. Available for inspection at our premises.