Telehandler

Merlo TRE EMME Ladeschaufel ZM2

Condition: used, functionality: fully functional, fuel type: diesel, Year of construction: 2023, operating hours: 181 h, construction height: 2,310 mm, drive type: Diesel, load capacity: 2,190 kg, construction width: 1,230 mm, Farm loader Mast type: None Technical condition: very good Front tires type: pneumatic Bedpovgiazofx Ac Tjll Front tires condition: 80 - 100% Rear tires type: pneumatic Rear tires condition: 80 - 100% Rear work lights, front work lights, heating, soot filter, full cabin, CE certificate, safety light, Image serves as a symbol for quick coupler pump type: gear pump hydraulic flow rate - hydraulic pressure: 58.3 l/210 bar system pressure drive: 420 bar

Condition: used, Year of construction: 2023, load capacity: 1,500 kg, lifting height: 4,300 mm, fork length: 1,100 mm, total length: 4,560 mm, · Max. Tragkraft 1500 kg · höhe 4.30 m · Maximale seitliche Reichweite 2.62 m · Reichweite bei max. Hubhöhe 1 m · Ausbrechkraft mit Schaufel 1880 daN · Shipping mass (min. / max.) 2700 kg / 2900 kg · Radstand 2.13 m · Gesamtlänge bis Gabelträger (mit Anhängerkupplung) 3.47 m · Gesamtlänge bis Gabelträger (ohne Anhängerkupplung) 3.47 m · Überhang vorne 0.77 m · Schüttwinkel 116 ° · Kippwinkel 23 ° · Wenderadius (über Räder) 2.62 m · Reifenmodelle CAMSO - MPT 552 - 10.0/75-15.3 124A8 · Heben 8.80 s · Senken 7 s · Teleskop ausfahren 6.40 s · Teleskop Einfahren 4.30 s · Ankippen 3.40 s Bedpoxd Hmiefx Ac Toll · Auskippen 2.60 s · Hersteller Yanmar · Motornorm Stage V / Tier 4 final · Motor Modell 3TNV88C-DMU · Anzahl der Zylinder - Tragfähigkeit der Zylinder: 3 - 1642 cm³ · Nennleistung Verbrennungsmotor / Leistung (kW) 35.10 Hp / 26.20 kW · Max. Drehmoment / Motordrehzahl 105 Nm @1950 rpm · Wendelüfter Option · Kühlsystem des Motors: 3 Kühler (Wasser + Hydrauliköl + Kraftstoff) · Getriebetyp Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre: Sperrdifferenzial an Vorder- und Hinterachse · Parkbremse: Automatische negative Parkbremse · Festellbremse: Hydraulische Servobremse · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 48 l/min - 235 bar · Flow Sharing Standard · Hydrauliköl 39 l · Fassungsvermögen des Kraftstofftanks 35 l · Innenschallpegel (LpA) gemäß Norm NF EN 12053 geprüft:76 dB · Außenschallpegel (LwA) 104 dB · Vibrationswert an Händen/Armen < 2.50 m/s² · Sicherheit Zulassung der KabineKabine ROPS - FOPS Stufe 1 · Steuerungen JSM

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 184 h, load capacity: 1,500 kg, lifting height: 4,300 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 2,700 kg, drive type: Diesel, construction width: 1,490 mm, Telescopic forklift rigid Load center of gravity: 500 Technical condition: New Front tires type: pneumatic Front tires size: 10.0/75-15.3 Rear tires type: pneumatic Rear tires size: 10.0/75-15.3 Bsdpfxjmky N Ao Ac Tell Quick coupler, 3rd valve, rear work lights, front work lights, heating, full cabin, CE certificate, Images may serve as symbolic representations of fork carriage with forks

Condition: used, Year of construction: 2023, load capacity: 1,500 kg, lifting height: 4,240 mm, total length: 4,570 mm, · Max. Tragkraft 1500 kg · Max.Hubhöhe 4.30 m · Maximale seitliche Reichweite 2.62 m · Reichweite bei max. Hubhöhe 1 m · Ausbrechkraft mit Schaufel 1880 daN · Shipping mass (min. / max.) 2700 kg / 2900 kg · Radstand 2.13 m · Gesamtlänge bis Gabelträger (mit Anhängerkupplung) 3.47 m · Gesamtlänge bis Gabelträger (ohne Anhängerkupplung) 3.47 m · Überhang vorne 0.77 m · Schüttwinkel 116 ° · Kippwinkel 23 ° · Wenderadius (über Räder) 2.62 m · Reifenmodelle CAMSO - MPT 552 - 10.0/75-15.3 124A8 · Heben 8.80 s · Senken 7 s · Teleskop ausfahren 6.40 s Bodsztgh Eopfx Ac Toll · Teleskop Einfahren 4.30 s · Ankippen 3.40 s · Auskippen 2.60 s · Hersteller Yanmar · Motornorm Stage V / Tier 4 final · Motor Modell 3TNV88C-DMU · Anzahl der Zylinder - Tragfähigkeit der Zylinder: 3 - 1642 cm³ · Nennleistung Verbrennungsmotor / Leistung (kW) 35.10 Hp / 26.20 kW · Max. Drehmoment / Motordrehzahl 105 Nm @1950 rpm · Wendelüfter Option · Kühlsystem des Motors: 3 Kühler (Wasser + Hydrauliköl + Kraftstoff) · Getriebetyp Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre: Sperrdifferenzial an Vorder- und Hinterachse · Parkbremse: Automatische negative Parkbremse · Festellbremse: Hydraulische Servobremse · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 48 l/min - 235 bar · Flow Sharing Standard · Hydrauliköl 39 l · Fassungsvermögen des Kraftstofftanks 35 l · Innenschallpegel (LpA) gemäß Norm NF EN 12053 geprüft:76 dB · Außenschallpegel (LwA) 104 dB · Vibrationswert an Händen/Armen < 2.50 m/s² · Sicherheit Zulassung der KabineKabine ROPS - FOPS Stufe 1 · Steuerungen JSM

Condition: good (used), functionality: fully functional, Year of construction: 2021, total height: 1,610 mm, total length: 1,910 mm, total width: 2,850 mm, shovel Producing company Unbekannt Type Merlo Schaufel Year built 2021 Bedpfexpya Tsx Ac Tell Height (mm) 1,610 Length (mm) 1,910 Width (mm) 2,850

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 19 h, load capacity: 454 kg, empty load weight: 17,917 kg, construction height: 2,800 mm, fuel type: diesel, total length: 10,250 mm, drive type: Diesel, arm reach: 22,710 mm, construction width: 2,490 mm, working height: 27,910 mm, Telescopic boom lift Blodpfx Asy Ii Hcec Tel Technical condition: New Battery condition: New Description: The Genie S-85 XC E is a powerful telescopic boom lift for working at great heights outdoors as well as on uneven terrain. With a working height of up to 27.9 m, a large lateral reach, the XC version with higher lifting capacity, and all-wheel drive, this machine is ideally suited for heavy assembly, maintenance, and construction work, even under demanding operating conditions. Robust, off-road capable, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer boom lifts and telescopic loaders for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, machine/vehicle number: 1680, Year of construction: 2017, operating hours: 2,690 h, load capacity: 4,000 kg, lifting height: 18,000 mm, overall weight: 13,200 kg, enginetype: Diesel, manufacturer: Merlo Bledpfx Ajzuk Uljc Tol

Year of construction: 2019, condition: used, For sale: a partial injection molding cell consisting of a hydraulic press, a linear Cartesian robot, and a perimeter safety fence. This system is ideal for those seeking a ready-to-use package for molding and automatically unloading parts. The package includes only the 3 items listed below: 1. HYDRAULIC INJECTION MOLDING MACHINE Brand and Model: ARBURG ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN (200 tons) Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Machine weight: approximately 6,500 kg 2. LINEAR CARTESIAN ROBOT Brand and Model: STAR AUTOMATION XW-1000VI 2V Year of manufacture: 2019 Configuration: 3 servo-assisted linear axes (brushless motors), space-saving telescopic vertical arm. Included: Control cabinet, original operating keyboard (remote control) for programming, and manuals. 3. PERIMETER SAFETY FENCE Manufacturer: Star Automation Europe Features: Modular structure with a metal mesh to protect the work area. Access door equipped with safety microswitches and an interlocked electric lock. Bsdszw H Dbjpfx Ac Toll Included: External control panel for access requests and emergency chain reset.

Condition: good (used), fuel type: diesel, lifting height: 25,100 mm, Year of construction: 2021, Empty weight: 19.530 kg Lifting capacity: 5.500 kg Dimensions of cargo space: 826 x 250 x 311 cm Technical condition: good Visual appearance: good Delivery terms: EXW Please contact Christian Theißen for more information Manufacturer: JCB Model: 555P260R Year of build: 2021 Condition: Used Data: Max. lifting height: 25,14 m Lifting capacity: 5.500 kg Max. extension: 21,80 m Length forks: 1,20 m Drive type: Diesel Total dimensions LxWxH: 8,26 x 2,50 x 3,11 m Transport dimensions LxWxH: 8,19 x 2,50 x 3,03 m Rotation range: endlos Bsdpfx Aszn Nu Roc Toll Empty weight: 19.530 kg Special features: All-wheel drive, all-wheel steering, differential lock, supports, automatic attachment recognition. Location: 41468 Neuss immediately available