Pick-up

Mercedes-Benz Puch 230GE Wolf Militarausfuhrung CH

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: 237042, power: 25 kW (33.99 HP), overall weight: 1,575 kg, fuel type: electric, color: yellow, From my own experience: The battery lasts a whole working day without any problems when continuously charged Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Log diameter: Ø 20 Feed width (mm): 240 Engine power: 25 kW - torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (KG): 1575 Equipment: Power Control System - whisper-cut shredding system The Schliesing mid-range is now also available as an electric shredder - the Schliesing 325MX-E shredder. The powerful brushless asynchronous motor with an output of 25 kW and a torque of 120 Nm ensures productive work with the usual pulling power. The batteries are designed to enable a full working day without charging. The 325MX-E enables emission-free chipping with low noise levels and offers uncompromising productivity for logs up to 20 cm in diameter. Engine and chassis: Brushless asynchronous motor with 25 kW and a torque of 120 Nm Fully galvanized, corrosion-resistant single-axle chassis for 80 km/h including EU homologation Robust, solid and widened sheet steel mudguards Solid support wheel at the front and parking support at the rear Towing device with overrun brake and soft dock ball coupling or DIN towing eye LED lighting in accordance with StVZO (impact-protected) Pneumatic tires 205/65 R15 C Battery: LEP battery (lithium iron phosphate) with a capacity of 300 Ah at 96 V Allows the chipper to be used for a full working day without charging. No recharging required during long downtimes Energy recovery through recuperation of the kinetic energy of the chipping disc during the work process Charging connection: protective contact plug 220-240V/16A Charging time for full charge: 8 hours Guarantee for 1000 charging cycles at 80% SOH (State of Health) Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth Fully galvanized, corrosion-resistant hopper flap Funnel dimensions (inside): width = 1,040 mm, height = 960 mm Pivoting blow-out pipe with adjustable spreading flap Blow-out pipe on ball bearing slewing ring Relevant machine parts with sound insulation (especially chipper hood and blow-out pipe) Two emergency stop buttons on top of the hopper and on the side of the hopper flap Chipping mechanism: Chipping mechanism with safety circuit according to EN 13525 Robust chipping disc Ø 655 mm, 35 mm thick Closed blade system for quick, safe and precise blade changes Continuously adjustable chipping blades Chipping blades can be resharpened multiple times for a long service life (approx. 10x) Horizontally usable counter blade and vertically usable counter blade, each 2-fold for a long service life Winding protection on the main bearing of the chipping disc Hydraulic feed: Feed control with its own hydraulic circuit PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive and even feed thanks to one oil motor per roller Parallel-guided top roller for regular and even feed to prevent jamming of the fed material Hydraulically adjustable feed speed and thus the wood chip size Fill level indicator for hydraulic oil tank OPTION OVERVIEW: The Whisper Cut® V-shaped blades feed the wood more evenly and with less vibration In combination with the centering PowerGrip roller, the chopped material hardly swings back and forth Itjdovmz N Uepfx Aa Eor

Year of construction: 2011, operating hours: 1,175 h, condition: used, functionality: fully functional, === KEY SPECIFICATIONS === Year: 2011 Operating hours: 1,175 h Drive system: 4×4 with automatic front lock and manual rear lock Transmission: 2-range CVT (continuously variable transmission) Top speed: 0 – 40 km/h Fuel type: Diesel Engine: 854 cc, 3-cylinder, 4-stroke diesel with liquid cooling Power: 13.6 kW at 3 400 rpm (ECE-R24) Fuel consumption: 0.95 L / h Fuel tank capacity: 20 L Payload capacity: 635 kg Towing capacity: 590 kg Cargo box: Steel, 1116 × 1244 × 229 mm (600 kg capacity, 320 L volume) Weight: 757 kg Ground clearance: 152 mm under transaxle / 305 mm under foot platform Front suspension: Independent McPherson struts Rear suspension: Coil over shock absorbers Brakes: Hydraulic disc (front and rear) Seats: 2 Dimensions (L×W×H): 2.87 × 1.51 × 1.87 m Tyres (front): 24×9.5-10.4 PR (all-terrain / turf) Tyres (rear): 24×12-10.4 PR (all-terrain / turf) Color: Green / Yellow Iodpfsxdamvox Aa Ejtr CE certified: Yes === HIGHLIGHTS === ✅ Durable Kubota 3-cylinder diesel engine – reliable and efficient ✅ Robust steel cargo box with 600 kg capacity ✅ Hydraulic disc brakes and independent McPherson suspension ✅ High ground clearance for off-road performance ✅ 4×4 drive with front/rear differential locks for maximum traction === CONDITION === Good working condition, only 1,175 hours. Ready for immediate use. === LOCATION & DELIVERY === Located in the Netherlands. Worldwide delivery possible. Price: € 8 850 (EXW / excluding VAT) The John Deere Gator 4x4 Diesel HPX offers power and durability for professional utility work in agriculture, construction, and maintenance. Equipped with a Kubota diesel engine and hydraulic disc brakes, this Gator delivers excellent off-road capability and payload performance. === DELIVERY === Crane loading available on request. Flexible shipping options tailored to your destination and logistics preferences. All shipments handled professionally by the Collé Rental & Sales logistics team.

Year of construction: 2013, condition: used, General information Field of application: Grounds care Technical information Power: 15 kW (21 HP) Type of fuel: Diesel Drive: Wheel Top speed: 40 km/h Weights Empty weight: 757 kg Carrying capacity: 590 kg GVW: 1.347 kg Condition General condition: average Technical condition: average Visual appearance: average Other information Towing capcity: 590 kg Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: John Deere Model: Gator 4x4 HPX Year of build: 2013 Condition: Used Data: Length: 280 cm Width: 160 cm Height: 190 cm Seats: 2 Drive type: Diesel, 21 PS Own weight: 757 kg Loading area LxW: 112 x 124 cm Payload: 590 kg Towing capacity: 590 kg Top speed: 40 km/h Road permission: yes Total permissible weight: 1.347 kg Iodpev Ti Hhefx Aa Eotr Special features: Four-wheel drive, differential lock, Loading area with tilting function. Information: The Gators are sold without any accessories!

Condition: used, machine/vehicle number: 1388A, mileage: 932 km, power: 179 kW (243.37 HP), first registration: 07/1986, fuel type: diesel, overall weight: 16,892 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, TUV is NEW!!! So-KFZ registration, The AM General in a really good condition directly from the Army, well maintained and maintained, the body is in a great condition (vehicle from the reserve) the paint is also already, just Natogrun matt, The M931A1 is equipped with: Cable winch, all-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), 2 diesel tanks with switch for the right or left tank, raised exhaust, air brake with ABS, 3 front seats, the body is a saddle plate movable for off-road driving. The saddle plate can also be fixed for road operation by means of sliding wedges , The km indication are miles , Driving license class 2 (truck) , Tire size 14.00R20 tubeless (very good condition) , Top speed 105 km / h , Engine capacity 14011cm? , , 24Volt power supply , The M931A1 has not only Tuv, but also drives reliably :-) - A tractor unit for real off-road use ! ! ! - The AM Generalist is a real pleasure to drive and can also be insured cheaply as a youngster. - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Itedpfxeqx Sxls Aa Eor

Condition: new, 1 brand-new universal milling head "HURON" system Make: EMENA Model: V 0, ISO 40, normal Technical data: Mounting ISO 40 Projection 270 mm Rated drive power 5 HP Max. speed 1800 rpm Weight approx. 32 kg Design: Standard, with adapter plate / mounting flange finished on the head side, unmachined on the machine side, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any kind, "HURON" system Option: - Raised version Delivery time: approx. 3 months, after receipt of order and payment Illustrations are similar! Siegfried Volz Machine Tools Isdpobpmv Sofx Aa Eetr Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: used, mileage: 52,950 km, power: 218 kW (296.40 HP), fuel type: gasoline, gearing type: automatic, first registration: 10/2005, fuel consumption (urban): 21.8 l/100km, fuel consumption (extra-urban): 13.7 l/100km, fuel consumption (combined): 16.7 l/100km, CO₂ emissions: 400 g/km, emission class: euro4, color: black, number of seats: 4, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, ESP, tow bar ball head, trailer load: 2850 kg braked, Comand, automatic transmission with shift lock, permanent all-wheel drive, electrically adjustable and heated outside mirrors, CD changer, electric windows, automatic air conditioning (Thermotronic), auxiliary heating, fog lights, windshield wipers with rain sensor, power steering, multifunction steering wheel in leather/burl wood, multi-contour seat with seat heating for driver and front passenger, cruise control, central locking, spare wheel with stainless steel cover, side running board, hands-free system for cell phone with UHI, alarm system, auto-pilot system with CD, original MB black tarpaulin with bag. Itodpfew Eg Aiox Aa Eer

Year of construction: 1970, condition: not inspected (used), Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. For rebuilding, because the control cabinet is missing! Technical data: Iodpfx Ashikdwsa Estr Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. 1 press loading basket with 10 positions. 1 BVH 10-stage press with thermal oil heating platens. Itjdpfx Aajul Uize Esr - Platen size: 3700 x 1900 - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². 1 press unloading basket with lateral evacuation pushers on lifting table. Line currently in operation, available second half of 2025.

Condition: used, functionality: unexamined, Year of construction: 2007, operating hours: 966 h, machine/vehicle number: 172740708, load capacity: 120 kg, mast type: telescopic, lifting height: 14,000 mm, platform width: 1,400 mm, empty load weight: 1,650 kg, transport length: 4,000 mm, transport height: 1,950 mm, construction height: 1,950 mm, next inspection (TÜV): 02/2024, fuel type: diesel, tire condition: 50 %, Tracked lift, tracked articulated work platform Octopussy 14.12 Twin with 120 and 200 kg basket load capacity, switchable, currently without TÜV inspection but operational with diesel engine, fully hydraulic with 2 hydraulic circuits, 4 hydraulic outriggers. Ijdsw Aw Anepfx Aa Ejtr

Condition: used, Year of construction: 2023, operating hours: 248 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tyres (front): 600/70 R30, Tyres (rear): 710/70 R42, Operating hours: 248, First registration: 17.12.2024 _____ Standard equipment/technical data ENGINE Max. power 180/245 kW/HP (ISO 14396) Max. torque 1100 Nm Maximum power with power boost 194/265 kW/HP Max. torque with power boost 1178 Nm 6-cylinder, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard (DOC+SC+SCR) without EGR, Stage V Electronic engine management with Vistronic fan control Engine speed memory Powercore engine air filter with pre-cleaner EasyCare cooling package Additional fuel pre-filter with water separator 500-litre fuel tank Iodpfxovv Dp No Aa Eetr