Loading platform

Mercedes-Benz GLE 300 d AMG BURM+AHK+AIRM+PANO+MEMORY+21"

Condition: used, Year of construction: 1992, Technical details: lifting capacity: 5 t span width: 21000 mm stroke speed: 8,0 precise lift: 0,8 m/min rope diameter: 14 mm connected load: 10,2 kW SINGLE GIRDER SUSPENSION CRANE Fsdpfx Aeu Nvg Dsfnsfu Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 100 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 71 A2, travel speed 2,5 m/min. Size of travel wheels Ø 170mm (16 pieces) Trolley main hoist EKDH 525 H12 KV3-2/1 F10; type KBV 71 B8/2; travel speed 20,0 / 5,0 m/min.; size of travel wheels Ø 125mm (4 pieces) Hoisting gear: type KBH 125 B4; lifting height 12.000 mm; braked with displacement runner; lifting speed (main stroke 8,0 m/min. and fine stroke 0,8 m/min.) single hook size 2,5 rope Ø 14mm; rope length 28.3 m; power unit group FEM 1 AM Operation via pushbutton pendant control with DST Special feature: traversing piece with interlock and stitch tracks + infrared There are more bridge cranes with a 21-meter span for sale. *

Condition: good (used), Year of construction: 2009, functionality: fully functional, Weight 4950 kg, total weight 12000 kg Ffodpfx Afewpmcksnsu 5.5 kW

Condition: used, Year of construction: 1992, Technical details: lifting capacity: 10 t span width: 21000 mm stroke speed: 6,3 m/min. precise lift: 1,0 m/min rope diameter: 14 mm connected load: 15,5 kW Ffedpfx Ajv N Ib Njfneu SINGLE GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 112 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 80 A4, travel speed 2,5 m/min. Size of travel wheels Ø 200mm (16 pieces) trolley main hoist EKDH 525 H20 KV3-4/1 F6; type KBF 80 A8/2; speed 20,0 / 5,0 m/min.; size of travel wheels Ø 160mm (4 pieces) Hoisting gear: type KBH 160 B2/12; lifting height 10.000 mm; braked with sliding runner; lifting speed (main stroke 6,3 m/min. and fine stroke 1,0 m/min.) Single hook size 5.0 rope Ø 14mm; rope length 46m; drive group FEM 1 Am Operation via pushbutton pendant control with DST Special feature: crossover piece with interlock and stitch tracks Es stehen weitere Brückenkrane mit der Spannweite 21 Meter zum Verkauf. *

Condition: used, Aufspannplatte - Tisch einer Langhobelmaschine - Ffjdpfobn Amfsx Afnsu Tischbreite/Aufspannbreite: 1845 Tischlaenge/Aufspannlaenge: 5505 mm 7 T-Nuten laengs fuer T-Nutensteine: M 30 T-Nutenabstaende zueinander: 263 mm Gesamtlaenge: 6230 mm Plattenhoehe insgesamt: 350 mm Gewicht: 11 t

Condition: excellent (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centring hole: 100 H6 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm The displacement is measured via a ROD 250 rotary encoder. Condition: Very good (used) Optionally with machine bed (travel = 2000 mm ) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines Ffjdpfofk R Tdox Afnju - spare parts - after-sales service - machine service - machine overhauls - control modernization

Year of construction: 2004, condition: good (used), Build in 2004 Description/configuration: Complete line for automatic pallet strapping, automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Line with ""straight""-configuration, built with chain conveyors and configured as follows: > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.01 > pallet strapper Cyklop XZE-3111, REF 25778.30 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.02 > Straight chain conveyor underneath wrapper, motorized, travel is long side leading, l~2600 mm, REF 25778.03 > ring style pallet film wrapper Cyklop GL 2000, REF 25778.40 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04" Layout available max speed in pallets/h: 50 pallets/h Chain conveyor Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~1700 mm Height of pallet conveying (min=300mm): ~400 mm max weight full pallet: ~1500 kg Over all length equipment: ~8000 mm Over all width equipment: ~6000 mm Over all height equipment: ~3500 mm Input Power: ~15 kw (whole line) Ffedpfx Afohrmlksneu Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1,5 hrs), Leipzig (~2hrs), Berlin (~2,5 hrs) Condition: cleaned & in working conditions Machine available: upon request

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Ffsdpfxsvf E Avj Afnsu Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Painting line Stationary Automatic Electrostatic Powder Coating System The system design is based on the implementation of the customer-specific desired flexibility and functionality. Additionally available system components such as the IPS coating system with Smart Feeding Technology (SFT) and fully automatic color change or the use of Z-axes - for the dynamic individual feed of the guns during the coating of a component synchronously with the vertical stroke movement enable excellent coating results. Stationäre Automatik-Elektrostatik-Pulverbeschichtungsanalge Applaktionssystem mit Kabine SuperTech Kabine Glasbeschichtungs-Kabine Nachfiltereinheit Filtersteuergerät MFS 07 PrimaCenter Pulverbehälter Pulverversorgung Glastbesch. Frischpulverfördereinheit Pulverpumpe IP 5000 Pulverinjektor PI-F1 PI-P1 Fodpjrr Uhwjfx Afnsfu Lineareinheit Pulverpistole PEA-C4HiCoat

Year of construction: 1999, condition: used, CAPACITY 2000kgr Ffsdpfx Afswa I A Tsnju HEIGHT 4.7M & 5M ARM LENGTH 3.2M 2 PIECES

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Fodpfsv Ab Dqex Afnefu Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller