Car carrier truck

Mercedes-Benz Atego 1328 L 4x2, Rennwagentransporter, 6-Sitzer,

Condition: used, mileage: 19,950 km, first registration: 11/1989, fuel type: diesel, axle configuration: 4x4, gearing type: mechanical, Year of construction: 1989, Equipment: all wheel drive, Mercedes-Benz 1428 AF 4x4 (central and rear axle locks, low-range gearing) with 7 seats Water tank: 2,500 liters Pump: Metz, with a flow rate of 2,800 l/min Additional equipment: quick attack connection on the right side with a 50-meter hose Lhjdpfx Aefarx Uokljl Dimensions (LxWxH): 7100 x 2300 x 3000 mm Wheelbase: 3800 mm Tires: 275/70 R22.5

Condition: new, Year of construction: 2020, total length: 2,100 mm, Tugger Club Car Tempo Lsdpfx Ajxpx Uijkljhl Drive Electric Year built 2020

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. Lhodpfemhhypex Aklel For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, This listing is for a Brand New Harvest Right Large Home PRO Freeze Dryer sold through We are stock holders in UK A home Pro freeze dryer from Harvest Right allows you to preserve the food your family loves to eat. Freeze drying locks in both flavour and nutrition and can last for years, making freeze-dried food even better than fresh! A home freeze dryer is perfect for any lifestyle. What’s Included - Large Freeze Dryer - Premier Industrial Vacuum Pump (approx. £1600 value) - Vacuum Pump Oil - Oil Filter - Stainless Steel Trays (set of 6) - Guide to Freeze Drying - Mylar Bags (50 ct) - Oxygen Absorbers (50 ct) - Impulse Sealer Features - Tray space: 1,107 square inches - Freeze dry 8 to 12.2KG. fresh food per batch - Freeze dry up to 2267KG. fresh food per year (This would require a person to use the freeze dryer 4 times a week for 50 weeks a year) Dimensions - Freeze dryer exterior dimensions: 541mm W x 698.5mm D x 795mm H - Perfect for counter top, cart, or table. Weight of freeze dryer: 64.8KG 10 CFM industrial vacuum pump included/no extra cost (approx. £1600 value) Power Standard UK 230v Shipping Info Ledpoxzgwijfx Akljhl - The large freeze dryer ships in one package with a total weight of 115KG. - Item will be delivered in international shipping pallet - One freeze dryer on pallet: 74cm W x 97CM D x 122CM Height (Includes packaging and pallet - In the event of customer collection from Duxford (By Prior Arrangement), alternative packaging can be arranged Maintenance Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Warranty 1 Year international warranty provided by Harvest Right.

Condition: new, Brugger HX14 shredder - compact, powerful and ready for use anywhere! The Brugger HX14 shredder combines maximum performance with impressive mobility. With its powerful 25 HP petrol engine and the ability to effortlessly shred branches and trunks up to 14 cm in diameter, it is the perfect choice for demanding gardening and landscaping projects. Thanks to its compact design and road approval, the HX14 can be transported quickly and easily anywhere - whether in the garden, on construction sites or to remote locations. Efficiency and flexibility in one device! Your advantages at a glance: Lodpevpfutsfx Akljhl • Powerful: 25 HP petrol engine for powerful shredding • Large capacity: Processes branches and trunks up to 14 cm in diameter • Compact design: For easy handling and space-saving transport • Mobile and flexible: Ready for use anywhere with a trailer and road approval • Ideal for professionals and demanding projects: Reliable and durable for daily use The Brugger HX14 - your powerful partner for maximum mobility and efficiency! Dqqhzd Technical data: • Dimensions - 274 x 125 x 175 cm (l x w x h) • Weight - 383 kg • Blade - 2.36 cm wide • Max. diameter - 14 cm • Processing/h - 10-14 m³/h • Feed hopper on the drum - 36 x 14 cm Contact us for a tailor-made offer!

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Lodpfx Aeh Ek Dajklehl Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Year of construction: 2006, condition: used, NNP Lhjdeb Ua Eyjpfx Aklsl Food preparation machine Stainless machine with heads for Slicer/dicer and grater ideal for cheese, vegetables etc. Grids included 12x12, 8x8,

Condition: excellent (used), functionality: fully functional, mileage: 73,280 km, power: 213.29 kW (289.99 HP), first registration: 01/2007, fuel type: diesel, overall weight: 16,000 kg, tire condition: 95 %, axle configuration: 4x4, wheelbase: 3,600 mm, next inspection (TÜV): 06/2027, fuel: diesel, color: red, driver cabin: other, gearing type: automatic, emission class: euro4, suspension: steel, number of seats: 9, total length: 7,750 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, additional headlights, all wheel drive, differential lock, fog lights, parking heater, trailer coupling, truck registration, MB ATEGO 1529 HLF 20 superstructure by Rosenbauer, all-wheel drive (4x4) Crew cabin for 1 + 8 personnel Differential lock L/W/H: 7300x2500x3400 mm 2000 l tank Pump: 2000 l/min, manufactured by Rosenbauer Normal pressure/High pressure Pneumatic front panel superstructure Surrounding lighting Roof box Storage for electrical equipment/lighting PA system storage/backrests in the cabin Martin horn system Front strobe Auxiliary heater Roof storage for extension ladder and 3-part sliding ladder Tool storage compartment Rear warning system Camera Extendable rotating ladder towards the cabin Roof monitor AHK Rockinger Lhjdpfx Aszx Hgxoklol New inspections (MOT/emissions test/safety inspection) available upon request for an extra charge Asking price available upon written request Sale without any equipment or accessories -Sale only to government agencies and commercial businesses- (no sale to private individuals) Sold as a used vehicle without warranty.

Condition: used, mileage: 526,060 km, power: 170 kW (231.14 HP), first registration: 03/2006, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: silver, gearing type: mechanical, emission class: euro3, loading space length: 7,370 mm, loading space width: 2,480 mm, loading space height: 500 mm, Year of construction: 2006, Equipment: ABS, air conditioning, crane, Equipment: * Body/Structure: Flatbed with crane superstructure, * Air conditioning * Towing hitch with two-line trailer brake, * Ball head towing hitch, * Driver seat: comfort suspension seat, * Middle seat with seatbelt, * Roof hatch (steel), * 6-speed manual transmission Superstructure: * Flatbed with aluminum side walls, * Internal dimensions: 7,370 mm x 2,480 mm x 500 mm, * Front wall protection grid, * Lashing eyes, * Toolbox, Crane: Atlas crane 85.2-7.3/2, year of manufacture 2002, Lifting capacity/outreach: * 2.25 t at 3.85 m * 1.52 t at 5.55 m * 1.14 t at 7.25 m Technology: * Radio navigation system, * Electrically adjustable and heated exterior mirrors, * Voltage converter 24V / 12V 8A, * Circuit breaker, Safety/Environment: * Telligent brake system with ABS, * Rear axle differential lock, * Engine brake with constant throttle, Other: * German first delivery, * 1 previous owner, * Engine: 6.4 L - 170 kW Diesel (OM 906 LA), Lhjdpfjuvfqqjx Akljl * Suspension: leaf / air, * Payload 3,835 kg according to registration certificate, * Permitted gross vehicle weight 11.99 t Since 1972, your reliable partner for cars/commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly holds approx. 200 vehicles from the areas of vans, commercial vehicles and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your “new” commercial vehicle is possible via our external partners for an additional charge. The information given in advertisements, on the Internet, price tags and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability/warranty for typographical errors or data transmission errors. Listed equipment items must be checked separately where applicable. Subject to prior sale and errors.

Condition: used, mileage: 57,500 km, first registration: 12/2003, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, gearing type: automatic, Equipment: ABS, 2003 Scania P114 GB 4x2 truck Automatic transmission, rear axle differential lock, cruise control, auxiliary heater, retarder 6 seats Water tank with 3,000 liters Camiva CB180 pump with 3,800 l/min at 10 bar Light mast with 2 spotlights Quick-connect hose reel on the right side, 40m External dimensions: Length: 7,850 mm Width: 2,550 mm Height: 3,250 mm Superstructure dimensions: Length: 4,000 mm Width: 2,550 mm Height: approx. 2,200 mm Wheelbase: 3,900 mm Tires: 315 80 R22.5 Lhedpfsim N Dqex Aklel