Crane truck

Mercedes-Benz AK 8X8 FASSI 660 EINZELBER SEILWINDE

Year of construction: 2022, condition: new, This system operates in automatic mode. The transfer of pallets between production line and curing area is carried out by Finger Car. 1 operator supervises the production process via control panel equipped with 4 different monitor, pc system. Automation system software has user-friendly interface and can be translated into customer’s preferred language. Production line requires the construction of curing chambers with racks. Steam curing is recommended for working in one shift and is mandatory for working in two shifts. Transfer of production pallets with green products to the curing chambers as well as the transfer of pallets with cured products to the cubing station is carried out by automatic pallet transport system known as Finger Car. Finger car consists of lower and upper electric trolleys, which move along a set of rails built perpendicularly to the concrete block production line. The upper trolley has steel forks for grabbing and holding pallets. It transfers concrete products to the curing chambers, going inside each chamber to place pallets with wet products on racks to cure. On its way back it takes a stack of pallets with cured products and loads it into the lowerator. Hjdpfjibcycox Aa Eeg The price given as 1.200.000 USD includes all the machine equipments, concrete batching plant and 3000 pallet rack system. It is very special offer for August 2022!

Condition: like new (used), Year of construction: 2024, operating hours: 420 h, functionality: fully functional, machine/vehicle number: 122, total length: 9,900 mm, total width: 2,450 mm, total height: 4,000 mm, overall weight: 21,000 kg, rotor diameter: 680 mm, rotational speed (max.): 42 rpm, power: 235.36 kW (320.00 HP), Equipment: rotational speed infinitely variable, Demo machine Arjes ekomaxx 800 Perfect shredder for green waste, waste, waste wood, plastic etc. Hsdpfjvzribsx Aa Ejg

Condition: like new (used), Year of construction: 2008, functionality: fully functional, mobile shredding machine - used- rebuilt - Arjes 760 D with magnet on wheelaxle Complete conversion to hydraulic drive -- High Performance Shredder -- the most powerful shredder in this size for heavy applications Hsdpfx Aev Dtfvja Esg RECONSTRUCTION Machine was completely dismantled and rebuilt by steel construction. Conversion to hydraulic drive system Engine: Mercedes Benz OM 471 Stage 3 350 KW / 477 HP!!! (without AdBlue) - Gearbox: SYNCHRONOUS: 2x125,000NM - Hydraulics: Bosch Rexroth -- 285cbcm pump + 2x 215cbcm hydraulic motors - Control: NEW - Hydraulic lines: NEW - Radio: NEW - Shafts / tools: NEW (Combined tool for wood, garbage, light scrap) Machine is equipped with secondary crusher bars WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With an in-house design department and a highly skilled team, we provide customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual needs of our clients through technological excellence and improvement. We serve companies across various sectors, including waste management, recycling, and mechanical engineering, and place great importance on long-term partnerships. With our reliable and high-performance shredding solutions, we help our clients increase their efficiency and competitiveness.

Condition: good (used), Year of construction: 2012, Year of manufacture: 2012 Technical condition: good Visual condition: good Please contact Joeri Celen or August Celen for further information. Hjdpfewx Ercjx Aa Esg

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. Hodpfx Aof N Nlvsa Eeg • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: used, mileage: 196,000 km, power: 350 kW (475.87 HP), first registration: 12/2011, fuel type: diesel, overall weight: 26,000 kg, gearing type: semi-automatic, emission class: euro5, loading space length: 4,750 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: crane, soot filter, Crane: ----- Retdarder- Air conditioning- Fassi 455-6- Bridge / tractor unitSuspension: Hjdjw Ub Evjpfx Aa Eog Leaf-air

Condition: good (used), mileage: 889,496 km, power: 412 kW (560.16 HP), first registration: 07/2012, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, Year of construction: 2012, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, second fuel tank, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminium fuel tank - Remote-controlled central locking - High beam - Speed limiter - Intarder - Refrigerator - Air suspension - Air horn - Spare wheel - Sun visor - Stability control - Auxiliary heater (parking heater) - Toolbox - PTO (power take-off) - PTO (power take-off) - Central lubrication system - Towing hitch = Further Information = Axle configuration Suspension: Air suspension Front axle: Steered; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 1: Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Lift axle; Steered; Tyre tread left: 50%; Tyre tread right: 50% Hjdpfx Aajw Il Ubj Eog Weights Unladen weight: 17,372 kg Payload: 8,628 kg Gross vehicle weight: 26,000 kg Functional Crane: HMF 3000 K6 30 tm radio remote, year of manufacture 2012, mounted at rear of chassis CE marking: yes Condition Technical condition: good Optical condition: good Financial information Price: On request Further information Please contact John de Koning or Mark de Koning for more information.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Hodpsvu Hfqsfx Aa Ejg Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...

Condition: good (used), mileage: 605,608 km, power: 309 kW (420.12 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 6,700 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, Year of construction: 2015, Equipment: air conditioning, cruise control, navigation system, parking heater, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Speed limiter - Refrigerator - Air suspension - Reversing camera - Sun visor - Auxiliary heater / Parking heater - Power take-off (PTO) - Power take-off (PTO) - Towing hitch = Further Information = General Information Year of manufacture: Feb. 2015 Drivetrain AdBlue system: Yes Axle Configuration Front axle: Max. axle load: 8,600 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Max. axle load: 11,500 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 18,525 kg Hsdjw H A Nbopfx Aa Eog Payload: 9,075 kg Gross vehicle weight (GVW): 27,600 kg Functional Mast: Articulated boom Crane: Yes Body brand: Palfinger PK 41002 -EH-E CE marking: Yes Condition Technical condition: good Visual condition: average Financial Information Price: On request Further Information Contact John de Koning or Mark de Koning for more information.

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal u- re-li-o-u.o without feeder only machine machine is dismantled, immediately available Hjdpencc Igjfx Aa Eog Transport can be organized