Storage lift

Megamat FSE 7.02448/816-4710

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm Njdpfsqt Dmysx Aarewk - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, control type: CNC control, laser type: fiber laser, laser power: 10,000 W, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, Equipment: CE marking, dust extraction, emergency stop, fume extraction, safety light barrier, Used Trumpf10kw 5040 4metre x 2metre Trumpf fiber laser for sale Year 2019 Complete with active cut control option Selling without automation Nedpfxoylax No Aarjwk 10kw / 10,000 w 4metre x 2metre cutting bed

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Nwsdpfoy Rnb Djx Aarjk

Condition: excellent (used), Year of construction: 2012, One Modula Lift ML 50D for sale. The Vertical Lift Module has been regularly serviced by the manufacturer since it was installed and is in great condition. Nwsdpfjv Uxrvox Aarok The trays have a width of 4,100 mm and a depth of 860 mm, providing 3.53 m² of storage space per tray. With 50 trays, the total storage area is 176.5 m². Each tray can hold up to 500 kg, giving a total capacity of 25,000 kg for all 50 trays. The Vertical Lift Module is located in a protected area with a mezzanine, which has helped keep the cladding and exterior in excellent condition. Specifications: Manufacturer: Modula Year of Manufacture: 2012 Model: Modula Lift ML 50D Height: 6,200 mm Width (Vertical Lift Module / Tray): 4,500 mm / 4,100 mm Depth (Vertical Lift Module / Tray): 3.058 mm / 860 mm Number of Trays / Tray Height: About 50 trays / 120 mm high edge Maximum Weight per Tray: 500 kg Electronics: 400 V, 20 A

Condition: new, Load Weight Shelf 42000 kg Nsdpfxofgyhdo Aarowk Loading weight per level 3000 kg Number of load levels 2 x 7 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm dimensions m

Condition: used, Year of construction: 2011, functionality: fully functional, total height: 8,550 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, 14 pieces Kardex Shuttles XP 500 of 8550mm Heights on stock Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3050x864 Nwedpfewnamyox Aarek Control : C3000, with OP3000 OPGraphic color display Serial No. : 11002214 Year of construction: 2011 Total Load: 2 x 33,500 kg Load per tray: MediumX: 460 kg (proportionally distributed) Tray dimensions: 3050 x 864 mm Number of trays: 32 pieces (more trays on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 8550 mm (height Kardex is adjustable to available height) Power: 3/N/PE400 V, 11 A, 50/60 HZ, 4.9 kVA This offer is valid provided system is unsold Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays MediumX: 460 kg each, evenly distributed, more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Wide x Depth x Height: 3380 x 3074 x 8550 mm - Footprint of the system appx: 10.39 m2 - Capacity with 32 trays: appx. 84 m2, every tray is appx. 2.64 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C3000, with OP3000 OPGraphic color display - LED anti-dazzle lighting above access point - Use of toothed belt for minimum noise - Use of toothed-belt for fastest order picking - Distances can be realized in steps of 25mm by arranging the support profile. a prerequisite for high compression storage Price: On request only by e-mail Price: excl. VAT, including transport, assembly and warranty Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift & rotating warehouse systems. See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 30 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: excellent (used), Year of construction: 2008, 300 kg load capacity welding rotary table, with hollow shaft diameter 125 mm with chuck 320 mm or 400 mm Nwsdpfx Aslamtbjarok very robust speed continuously adjustable from 0.15 to 5.0 RPM current transfer 350 A rotary table diameter 400 mm tilting up to 135° height in horizontal position 835 mm, when tilted up to the center approximately 735 mm length 850 mm x width 580 mm

Condition: used, Year of construction: 1998, Hänel Type: Rotomat 950 Device No.: 120.657*1 Year of manufacture: 1998 Device height: approx. 3800 mm Device width: approx. 3140 mm Device depth: approx. 1250 mm + 330 mm tabletop Number of trays: 18 Tray width: approx. 2880 mm Tray depth: approx. 400 mm Tray height: approx. 310 mm Shelf load capacity: 300 kg Nedey D S Hwspfx Aarjwk Total load capacity: 5400 kg Colour: Beige front / corners grey

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 500003520, Please state your offer price. Sale only within Europe, including Turkey. Njdpeyvrh Ejfx Aarowk Technical data as per attached handout. The machine is offered without packaging; any warranty or guarantee rights are excluded. Should you wish to dismantle the equipment yourself, please indicate this clearly in your offer. We do not guarantee the accuracy of the technical data, the completeness of tools and accessories, or compliance with all safety and environmental protection requirements as stated in accident prevention regulations.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, laser power: 6,000 W, CNC Laser Cutting System TruLaser 3040 Fiber (L81) 6000 Watt X Working area max.: 4000 mm Y Working area max.: 2000 mm Z Working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Operating hours: 18581 hrs. Laser beam on: 13125 hrs. Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 25 mm Sheet metal thickness copper max.: 10 mm Standard Equipment Machine: Working area: 3000 x 1500 mm Closed machine frame Cooling unit for machine and laser (water-air) Longitudinal conveyor Motion unit for highly precise machining Work area lighting Position laser diode Spray device Njdpfx Aezln Udoarjwk Automatic nozzle cleaning Gantry drive in combination with linear direct drives Integrated control cabinets Integrated cabinet Closed beam guidance via laser light cable (LLK) Machine status indicator Machine ambient temperature 5 to 35 °C Laser: Excitation via pump diodes Laser power control Cutting head: 1-cutting head strategy Universal cutting head with adaptive lens system Protective glass Online condition monitoring of the protective glass Control system: Fast reproduction Control system SINUMERIK 840D SL Ergonomic control panel with 21.5″ wide-screen multi-touch color display Integrated technology data Copper cutting package • Cutting data O2 and N2 Brass cutting package • Cutting data N2 Automatic shutdown Programmable cutting gas / pressure selection Microweld Remote support interface Multi-sheet processing (• Not possible in combination with automation) Condition Guide Functions: AdjustLine ControlLine FastLine FlyLine NitroLine PierceLine (• Additionally available from TruDisk 6001: Regulation and monitoring of the piercing process) FocusLine Data transmission: USB interface RJ-45 network interface Central Link Online Update Manager • Automatic download of updates via remote support connection • Installation of the updates when the machine is switched on or by the customer or by TRUMPF service • To use, the Online Update Manager must be activated; deactivation is possible at any time by the customer. Safety: CE marking Light curtains Multi-chamber extraction system Machine enclosure with certified viewing pane, door on the right Extended Standard Equipment: Compact dust collector Sliding roof Automatic pallet changer in the longitudinal direction Support rails made of structural steel External solid-state laser TruDisk 3001 with 1 LLK output Power supply for TruDisk via the machine - External solid-state laser TruDisk 6001 - BrightLine fiber - Nozzle changer - Copper cutting package - Brass cutting package - Mobile Control App - Viewing pane, door on the left - HighSpeed Eco - RCI interface - CoolLine - DetectLine