Screw compressor

MANNESMANN DEMAG Sprint 025

Year of construction: 2012, condition: ready for operation (used), A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible. Felhcowwlk Njdwwogg

Condition: new, For sale: a stock of new engines, approximately 1,500,000 kg. Fgolhcdwezgu D Iowjg Sale in batches. Minimum order quantity: 50,000 kg. All engines are either new or used, but refurbished. Approximately 3,000 units. Various manufacturers: Siemens, ČKD, MEZ, etc. Price per 1 kg: 1.50 EUR.

Condition: excellent (used), Year of construction: 2021, Cutting centre for standard profiles, as well as lift-and-slide door frames and thresholds, Thorwesten ASZ 3.2M in a special design. Processing length 6,500 mm for standard profiles and the Veka 82 system for lift-and-slide door frames and thresholds. Equipped with extended infeed and outfeed. Lifting and guide rollers located under the drive belts ensure smooth transport of sliding door frames. Stepless cutting angle adjustment from 22.5° to 157.5°. Automatic optimisation and processing of off-cuts. Saw blade diameter 500 mm. Includes dust extraction system and waste conveyor. Configured for the Veka profile system, including widening options and special profiles. Full HD panel with Windows 10 operating system. Fgolhcdszhi Nhswwjg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Thorwesten PBZ3 machining center for optimized processing of profiles. Felhcdszfvf Rjwwegg The tool carousel enables variable angles for all tools. All machining operations – milling, drilling, and screwing – are performed in a single pass. A dynamic screwdriver reduces processing times.

Condition: used, mileage: 1,001 km, first registration: 01/2009, color: red, driver cabin: other, gearing type: other, Year of construction: 2009, Vehicle location: Bovenden, emergency stop, foldable, 2-point hydraulic outriggers, 1x hydraulic extension Folhetd Hffocdwwjgg Load diagram: 2m-3000kg, 2.3m-2610kg, 3.5m-1900kg, 3.8m-1650kg, 5.4m-1160kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Fsler A El Eohcdwwogg Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Year of construction: 2008, condition: not inspected (used), Emergency power generator Geko 6401 ED-AA/ZEDA, year of manufacture 2008, 2050 operating hours, diesel, 220/400 volts, serial number 100821, engine runs but does not generate electricity. Fgjlhcdwogqfxroweg

Condition: used, Year of construction: 1997, feed pressure 10 bar liter capacity 1500 l Number of working hours 5111 h total power requirement 11 kW Fjlhceid S Trodwwjgg weight of the machine ca. 250 kg

Condition: new, Year of construction: 2018, functionality: fully functional, CHILLER – AS GOOD AS NEW!!! Manufacturer: Piovan Felhcdowc I S Towwjgg Type: Aquatech CH50 Year of manufacture: 2018 Connection power: 4.1 kW Cooling capacity: 7 kW Refrigerant: R407C The unit is practically new – only used for testing! PRICE REDUCED FROM 4250 TO 3650 EUR

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, lifting height: 10,000 mm, load capacity: 8,000 kg, lifting speed: 6,000 mm/s, fine lifting speed: 1,000 mm/s, input voltage: 400 V, Equipment: documentation/manual, Demag Hoist – Suitable for double-girder cranes – Capacity: 8 tons – Lifting height: 10 m Fgelhcoy Rhhkodwwjg – Year of manufacture: 2019 – Type: Demag F-DMR-10-8-H20/10-4/1-Z-V1/6-400/50-CC A1 – Trolley track width: 1,400 mm – FEM/ISO class: 3m / M6 – Hoist type: wire rope hoist – Rope configuration: 4/1 Speeds – Hoisting: 6/1 m/min (2 speeds) – Trolley travel: 25/6.3 m/min Features – Crane manual available: yes – Condition: in good condition Including Demag Wheel Sets – Length: 2,900 mm (excluding buffers) – Height: 300 mm – Suitable for 50×30 mm crane rail Features – Equipped with crane travel motors: ZBF 100 A8/2 B050